Client: Project name: Order #: Type: Qty: DESCRIPTION: Part of the Lumentalk system, Lumentranslator is an electronic device that translates signals from any control source (DMX, 0-10V, TRIAC, DALI or ELV), converting it into a robust digital signal shared over a power network. FEATURES AND BENEFITS: Physical : Lumentranslator interface for local and remote installation Standard double gang back box included (surface or recessed model) Standard blank double gang cove plate included Performance : Operating temperatures: 0 C to 50 C [32F to 122F] Dry location only Electrical : Line voltage interface for 120 to 277V Integrated power supply card Multiple dimming signal: 0-10V, DALI, DMX, ELV, TRIAC Consult www.lumenpulse.com for a list of compatible dimmers Knockouts for 1 2 " NPT hubs Strain relief by others GROUND DATA - DATA + TOP VIEW 4 9 " 16 [116mm] 2 3 " 16 [56mm] 4 1 2 " [114mm] FRONT VIEW SIDE VIEW 5 year warranty 1/6
INSTALLATION DETAILS 2 3" 16 [56mm] 2 3" 16 [56mm] TOP VIEW TOP VIEW FRONT VIEW Recessed junction box installation detail FRONT VIEW Remote & surface junction box installation detail FIXTURE AVAILABILITY TABLE White light only Fixture model / Availability / Exceptions Lumenline family Lumenline (all models) 1ft * Lumenbeam family Lumenbeam Large Lumenbeam Large Pendant Lumenbeam Xlarge Lumenbeam LBX Pendant Lumencove family Lumencove XT Lumenfacade family Lumenfacade Stand Alone Lumenfacade Horizontal Lumenfacade Interior Lumenfacade *Please consult factory for remote Lumentalk installations. 2/6
TYPICAL WIRING DIAGRAMS Local & remote installation (0-10V Version Shown) * must remain accessible at all time. Typical lumenline fixture - lumentalk dimming Lumentranslator 0-10V 0-10V Dimmer (Consult www.lumenpulse.com for a list of compatible dimmers) 120-277V Circuit from Electrical Panel Data from the dimmer (typical #24-2 cable by others) *Maximum distance between dimmer and lumentranslator is 50 [15m]. (typical 0-10V dimmer wire purple Data+ orange No connection gray Ground N.B. Wire colors from different dimmer types may vary. Consult Lumentranslator Wiring detail for connection information. GROUND NO CONNECTION DATA + * For DALI, DMX, ELV and TRIAC control protocols please consult the wiring diagrams on pages 4-5. 3/6
WIRING DIAGRAMS DALI CONTROLLER (typical DALI controller wire purple purple purple Data 1 orange Data 2 gray No connection NO CONNECTION DATA 2 DATA 1 DMX CONTROLLER (typical DMX controller wire purple orange DMX shield purple Data+ orange Data - gray DMX shield DMX SHIELD DATA - DATA + ELV DIMMER (typical ELV dimmer wire black yellow white purple Hot (line) orange Dimmed Hot gray Neutral NEUTRAL DIMMED HOT HOT (LINE) N.B. Wire colors from different dimmer types may vary. Consult Lumentranslator Wiring detail for connection information. 4/6
WIRING DIAGRAMS - continued TRIAC DIMMER (typical TRIAC dimmer wire red black purple Dimmed Hot orange Hot (line) gray No connection NO CONNECTION HOT (LINE) DIMMED HOT N.B. Wire colors from different dimmer types may vary. Consult Lumentranslator Wiring detail for connection information. 5/6
HOW TO ORDER LTL Housing Voltage Input Dimming signal Cover plate finish Certification 1 2 3 4 5 1 Housing: LTL - Lumentranslator 2 Voltage: 120-120 volts 208-208 volts 240-240 volts 277-277 volts 3 Input Dimming signal: 010-0-10V dimming signal DALI - DALI dimming signal DMX - DMX dimming signal ELV - ELV dimming signal TRIAC - TRIAC dimming signal 4 Cover plate finish: WH - White finish BK - Black finish SS - Stainless steel finish 5 Certification: UL - UL compliant CE - CE compliant EN - European Norms compliant 6/6