Submersible Dewatering Pumps
2
Dewatering Solutions for the Real World In the real world time is money, and worksites have no time for unwanted water. Sulzer has the solutions in a complete pump range for reliable dewatering. This brochure is an overview of Sulzer s submersible de watering pumps, which are the result of more than years of technical and real-world experience. Each pump type is presented with its key features, as well as dimensions, performance curves and the most impor- Whether you work in mining, tunneling or construction, the pumps here are your best insurance against waterrelated downtime. From purchasing to service, you can turn to Sulzer for dewatering solutions that make a difference in the real world. CONTENT PAGE Dewatering Solutions for the Real World 2 Submersible Drainage Pumps Type ABS J (small) - Type ABS XJ (medium) 6-7 Type ABS J (large) 8-9 Submersible Drainage Center-Line Pumps Types ABS JC and XJC 1-11 Submersible Sludge Pumps Type ABS JS 12-13 Type ABS XJS 1-1 AquaTronic and Other Supervision Options 16 Overview of Electronic Supervision Features 17 Pump Options and Accessories 18-19 Performance range Hz m 1 9 8 J, J 12 - J 1, JC 3, XJ 2 - XJ 8, XJC - XJC 8 J 2 - J 6 JS 12 - JS 1, XJS 2 - XJS 8 7 6 3 2 1 1 2 3 l/s 3 6 9 12 m 3 /h Sulzer s complete range of submersible dewatering pumps provides reliable solutions for all major dewatering needs. DlmsJXJ/SmsJXJSaa 3
Submersible Drainage Pump Type ABS J Submersible drainage pump type ABS J is suitable for pumping water and dirty water mixed with light abrasives. The low weight and compact design makes for convenient transport, handling and installation. 1 Easy start A built-in contactor connected to the thermal sensors in the stator windings protects the motor from overheating and features an automatic restart function. 2 Wear resistance An impeller in white cast iron with a full upper shroud and adjustable wear parts coated in nitrile rubber ensure high abrasion resistance. 3 Reliable operation A double mechanical shaft seal in an oil bath, with primary and secondary seal surfaces in silicon carbide, extends the life of the pump. A double outer casing and good heat convection enable the pump to operate continuously at low levels or even run dry without damaging the motor. 1 Serviceability Due to the modular design, the same parts can be used for different pumps, which lowers the overall service costs. An adjustable diffuser ensures proper clearance throughout the impeller lifetime. By removing the top cover of the pump, the electrical junction area can easily be checked. 3 2
SUBMERSIBLE DRAINAGE PUMP TYPE ABS J J 1-PHASE m 12 1 J-AA Hz Motor rating P2.8 kw, 1~ Voltage (V) 23 Full load (A) 2.9 269 rpm 6 mm Discharge connections Hose 2 Thread G/BSP 2 Weight (excl. cable) 9. kg 1 m 8 6 2 W 1 2 3 l/s 187 286 1 1m 3 /h SUBMERSIBLE DRAINAGE PUMP TYPE ABS J 12 J 12 W/J 12 WKS* J 12 D/J 12 DKS** 1-PHASE 3-PHASE m17 1 J12-AD Hz Motor rating P2.9 kw, 1~ 1 kw, 3~ Voltage (V) 11 / 23 23 / / Full load (A) 1.9 /.2. / 2.3 / 1.9 27 rpm 28 rpm 6. x 22 mm Discharge connections Hose 1½, 2, 2½, 3 Thread G/BSP 2, 2½, 3 Weight (excl. cable) 16 kg 2 m D 1 W 8 l/s 1 2 3 m 3 /h Ø 22 23 D/W: 71 W (11V): 31 SUBMERSIBLE DRAINAGE PUMP TYPE ABS J 1 J 1 W/J 1 WKS* J 1 D/J 1 DKS** 1-PHASE 3-PHASE m 2 16 J1-W-AC/D-AC Hz Motor rating P2 1. kw, 1~ 1. kw, 3~ Voltage (V) 23 23 / / Full load (A) 8.1. / 2.9 / 2.3 28 rpm 28 rpm 6. x 22 mm Discharge connections Hose 1½, 2, 2½, 3 Thread G/BSP 2, 2½, 3 Weight (excl. cable) 18 kg (W), 16. kg (D) 2 m D 12 8 W 8 12 l/s 1 2 3 m 3 /h Ø 22 23 W: 21 D: 71 ** KS version not available in V.
Submersible Drainage Pump Type ABS XJ Submersible drainage pump type ABS XJ is excellent for pumping water and dirty water mixed with light abrasives. The slim design makes the pump easy to move and easy to handle. 1 Easy and fail-safe starting Instead of a built-in contactor, an optional AquaTronic unit can be used. The AquaTronic unit compensates for incorrect phase order, which ensures correct motor rotation every time. (Additional AquaTronic functions for electronic super vision are explained on pages 16-17.) 2 Wear resistance An impeller and wear ring in white cast iron, as well as diffusers coated in oil-resistant nitrile rubber, provide high abrasion resistance. 3 Reliable operation Double mechanical shaft seals in an oil bath, with primary seal surfaces in silicon carbide and secondary seal surfaces in silicon carbide on carbon, extend the life of the pump. A double cable-entry seal system increases the protection against moisture entering the electrical junction area. A double outer casing and good heat convection enable the pump to operate continuously at low levels or even run dry without damaging the motor. 3 1 Serviceability Due to the modular design, the same parts can be used for different pumps, which lowers the overall service costs. The adjustable wear ring ensures proper clearance throughout the impeller lifetime. External inspection ports for the oil and motor chambers enable quick and easy evaluation of the shaft seal during service. By removing the top cover of the pump, the electrical junction area can easily be checked. Less energy and environmental impact with low-friction bearings to reduce power losses. The result is low total energy costs and minimized carbon footprint. 6 3 6 Flexibility Conversion between high-volume and high-head hydraulics is managed with only a few parts, ensuring the right performance for the application. 2 6
SUBMERSIBLE DRAINAGE PUMP TYPE ABS XJ 2 XJ 2 ND* MEDIUM HEAD XJ 2 HD* HIGH HEAD Motor rating P2 2. kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 8.8 /.1 /.3 / 2.9 / 2. 292 rpm 7. x 22 mm Discharge connections Hose 2½, 3, Thread G/BSP 2½, 3, Weight (excl. cable) 39 kg 2 m m 3 HD 2 2 1 1 ND 1 1 2 2 l/s 2 6 8 m 3 /h XJ2-ND-AB/HD-AB Hz 372 Ø 27 332 373 699 SUBMERSIBLE DRAINAGE PUMP TYPE ABS XJ XJ ND* MEDIUM HEAD XJ HD* HIGH HEAD Motor rating P2 3.7 kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 13.2 / 7.6 / 6.1 /. / 3. 286 rpm 7. x 22 mm Discharge connections Hose 2½, 3, Thread G/BSP 2½, 3, Weight (excl. cable) 2 kg 2 m m 3 HD 2 ND 1 1 1 2 2 l/s 2 6 8 m 3 /h XJ-ND-AC/HD-AB Hz 372 Ø 27 332 373 699 SUBMERSIBLE DRAINAGE PUMP TYPE ABS XJ XJ ND* MEDIUM HEAD XJ LD* HIGH FLOW XJ HD* HIGH HEAD Motor rating P2.6 kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 19.7 / 11.3 / 9.-1.8 / 6.6 /. 293 rpm 7. x 22 mm Discharge connections Hose 3,, 6 Thread G/BSP 3,, 6 Weight (excl. cable) 9 kg 2 m m 3 2 1 HD ND LD 1 2 3 6l/s 1 1 2 m 3 /h XJ-ND-AD/LD-AA/HD-AC Hz max** 27 Ø 28 max** max** 66 76 SUBMERSIBLE DRAINAGE PUMP TYPE ABS XJ 8 XJ 8 ND* MEDIUM HEAD XJ 8 LD* HIGH FLOW XJ 8 HD* HIGH HEAD XJ 8 SD* HIGH HEAD Motor rating P2 8.3 kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 27.8 / 16 / 13.8 / 9.3 / 6. 292 rpm 7. x 22 mm Discharge connections Hose 3,, 6 Thread G/BSP 3,, 6 Weight (excl. cable) 63 kg (ND/LD), 78 kg (SD) 2 m m 8 6 2 SD ND LD 1 2 3 6 l/s 1 1 2m 3 /h XJ8-ND-AC/LD-AC/SD-AE Hz max** Ø 28 max** max** 66 ND/LD: 76 SD: 77 * Option: AquaTronic, built-in electronic pump control. ** Max measurement based on largest discharge size. 7
Submersible Drainage Pump Type ABS J Submersible drainage pump type ABS J is suitable for pumping water and dirty water mixed with light abrasives. The pump design enables convenient transport, handling and installation. 1 Easy to start Pump J 2 has a built-in contactor connected to the thermal sensors in the stator windings, which protects the motor from overheating and features an automatic restart function. Pumps J and J 6 have thermal sensors in the stator windings that protect the motor from overheating by means of an external control panel. 2 Wear resistance Abrasive-resistant impellers, combined with diffusers and wear rings coated in oil-resistant nitrile rubber, provide extended pump life in tough applications. 1 3 Reliable operation Double mechanical shaft seals in an oil bath, with primary seal surfaces in silicon carbide, extend the life of the pump. In pumps J 2 and J, the primary and secondary seals comprise an easyto-replace seal cartridge. A double outer casing and good heat convection enable the pump to operate continuously at low levels or even run dry without damaging the motor. Serviceability External inspection ports for the oil and motor chambers enable quick and easy evaluation of the shaft seal during service. By removing the top cover of the pump, the electrical junction area can easily be checked. The adjustable wear ring ensures proper clearance throughout the impeller lifetime. 2 3 Flexibility Conversion between high-volume and high-head hydraulics is managed with only a few parts, ensuring the right performance for the application. 8
SUBMERSIBLE DRAINAGE PUMP TYPE ABS J 2 J 2 ND MEDIUM HEAD J 2 HD HIGH HEAD Motor rating P2 21 kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 68 / 39 / 31.2 / 23 / 16 291 rpm 8 x 3 mm Discharge connections Hose, 6, 8 Thread G/BSP, 6, 8 Weight (excl. cable) 1 kg 2 m m 8 6 HD 2 ND 2 6 8 1 l/s 9 18 27 36 m 3 /h J2-HD-AC/ND-AC Hz 7 7 SUBMERSIBLE DRAINAGE PUMP TYPE ABS J J ND MEDIUM HEAD J HD HIGH HEAD Motor rating P2 3 kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 18 / 62 / 1 / 36 / 2 293 rpm 8 x 3 mm Discharge connections Hose, 6, 8 Thread G/BSP, 6, 8 Weight (excl. cable) 27 kg Motor protection Thermal overload sensors 2 m m 1 8 6 2 HD 8 J-ND-AE/HD-AC Hz ND 12 16 l/s 3 73 D: 11 D: 17 9 18 27 36 m 3 /h SUBMERSIBLE DRAINAGE PUMP TYPE ABS J 6 J 6 ND MEDIUM HEAD J 6 HD HIGH HEAD Motor rating P2 6 kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 18 / 16 / 8 / 61 / 2 1 rpm 12 x 6 mm Discharge connections Hose 6, 8, 1 Thread G/BSP 6, 8 Weight (excl. cable) 2 kg Motor protection Thermal overload sensors 2 m m 6 3 2 1 HD 1 ND 2 3 l/s 3 6 9 12 m 3 /h J6-ND-AB/HD-AB Hz 776 26 6 9
Submersible Drainage Center-Line Pump Types ABS JC and XJC Submersible drainage center-line pump types ABS JC and XJC are excellent for pumping water and dirty water mixed with light abrasives. The slim design makes them easy to move and easy to handle, and they are perfect for applications with limited installation space. 1 Easy and fail-safe starting In XJC pump models, an optional AquaTronic unit can be used instead of a built-in contactor. The AquaTronic unit compensates for incorrect phase order, which ensures correct motor rotation every time. (Additional AquaTronic functions for electronic supervision are explained on pages 16-17.) In JC pump models, a built-in contactor with an automatic restart function protects the motor. 2 Wear resistance An impeller and wear ring in white cast iron, as well as diffusers coated in oil-resistant nitrile rubber, provide high abrasion resistance. 3 1 3 Reliable operation Double mechanical shaft seals in an oil bath, with primary seal surfaces in silicon carbide and secondary seal surfaces in silicon carbide on carbon, extend the life of the pump. Pumps XJC and XJC 8 have a double cable-entry seal system that increases the protection against moisture entering the electrical junction area. A double outer casing and good heat convection enable the pump to operate continuously at low levels or even run dry without damaging the motor. Serviceability Due to the modular design, the same parts can be used for different pumps, which lowers the overall service costs. The adjustable wear ring ensures proper clearance throughout the impeller lifetime. External inspection ports for the oil and motor chambers enable quick and easy evaluation of the shaft seal during service. By removing the top cover of the pump, the electrical junction area can easily be checked. Less energy and environmental impact cy motors and new hydraulics, which combine with lowfriction bearings to reduce power losses. The result is low total energy costs and minimized carbon footprint. 3 2 6 6 Flexibility Pumps XJC and XJC 8 allow conversion between highvolume and high-head hydraulics with only a few parts, ensuring the right performance for the application. 1
SUBMERSIBLE DRAINAGE CENTER-LINE PUMP TYPE ABS JC 3 JC 3 ND, MEDIUM HEAD JC 3 HD, HIGH HEAD Motor rating P2 3 kw, 3~ Voltage (V) 23 / / Full load (A) 12.7 / 7.3 /. 28 rpm 8 x 33 mm Discharge connections Hose 2, 3 Thread G/BSP 2, 3 Weight (excl. cable) 31 kg 2 m m 3 3 2 2 1 1 HD ND 1 1 2 l/s JC 3HD-AA/ND-AB Hz 72 2 6 m 3 /h 1 SUBMERSIBLE DRAINAGE CENTER-LINE PUMP TYPE ABS XJC XJC ND* MEDIUM HEAD XJC LD* HIGH FLOW XJC HD* HIGH HEAD Motor rating P2.6 kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 19.7 / 11.3 / 9.-1.8 / 6.6 /. 293 rpm 7. x 22 mm Discharge connections Hose 3,, 6 Thread G/BSP 3,, 6 Weight (excl. cable) 9 kg 2 m m 3 2 1 HD ND LD 1 2 3 6 l/s 1 1 2m 3 /h XJC-ND-AD/LD-AA/HD-AC Hz 286 8 SUBMERSIBLE DRAINAGE CENTER-LINE PUMP TYPE ABS XJC 8 XJC 8 ND* XJC 8 LD* XJC 8 HD* XJC 8 SD* MEDIUM HEAD HIGH FLOW HIGH HEAD HIGH HEAD m 8 6 SD XJC8-ND-AA/LD-AA/SD-AE Hz Motor rating P2 8.3 kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 27.8 / 16 / 13.8 / 9.3 / 6. 292 rpm 7. x 22 mm Discharge connections Hose 3,, 6 Thread G/BSP 3,, 6 Weight (excl. cable) 63 kg (ND/LD), 78 kg (SD) 2 m 2 ND LD 1 2 3 6 l/s 1 1 2 m 3 /h 286 ND/LD: 8 SD: 8 * Option: AquaTronic, built-in electronic pump control. 11
Submersible Sludge Pump Type ABS JS Submersible sludge pump type ABS JS is excellent for pumping dirty water and water mixed with solids. The pump has a slim design and low weight, which makes it easy to move and easy to handle. 1 Easy to start A built-in contactor connected to the thermal sensors in the stator windings protects the motor from overheating and features an automatic restart function. 2 Clog-free pumping pump ideal for pumping solids. The impeller is avail- 3 Reliable operation Both the impeller and volute are made from heavyduty ductile iron for maximum durability. Double mechanical shaft seals in an oil bath, with primary and secondary seal surfaces in silicon carbide, extend the life of the pump. Convenient handling The top cover and motor housing are made of lightweight aluminum, which creates a pump that is very easy to handle and install. 1 Serviceability Due to the modular design, the same parts can be used for different pumps, which lowers the overall service costs. External inspection ports for the oil and motor chambers enable quick and easy evaluation of the shaft seal during service. By removing the top cover of the pump, the electrical junction area can easily be checked. 3 2 12
SUBMERSIBLE SLUDGE PUMP TYPE ABS JS 12 JS 12 W/WKS* -1 1-PHASE JS 12 W/WKS* -11 1-PHASE JS 12 D/DKS* -1 3-PHASE JS 12 D/DKS* -11 3-PHASE Motor rating P2.9 kw, 1~.9 kw, 3~ Voltage (V) 23 23 / / Full load (A).1 3.3 / 1.9 / 1. 28 rpm 28 rpm Free passage x mm Discharge connections Hose 2, 2½, 3 Thread G/BSP 2, 2½, 3 Weight (excl. cable) 18 kg 2 m m 1 1 1W 1 11W 2 6 8 1 l/s 1 2 3 11 JS 12-AA/W-AA Hz m 3 /h 22 27 SUBMERSIBLE SLUDGE PUMP TYPE ABS JS 1 JS 1D/DKS* -11 JS 1D/DKS* -126 3-PHASE 3-PHASE m 1 JS 1-AA Hz Motor rating P2 1.3 kw, 3~ Voltage (V) 23 / / Full load (A). / 2.6 / 2.1 28 rpm Free passage x mm Discharge connections Hose 2, 2½, 3 Thread G/BSP 2, 2½, 3 Weight (excl. cable) 18 kg 2 m 1 2 126 11 6 8 1l/s 22 27 1 2 3 m 3 /h 13
Submersible Sludge Pump Type ABS XJS Submersible sludge pump type ABS XJS is excellent for pumping dirty water and water mixed with solids. The slim design makes the pump easy to move and easy to handle. 1 Easy and fail-safe starting Instead of a built-in contactor, an optional AquaTronic unit can be used. The AquaTronic unit compensates for incorrect phase order, which ensures correct motor rotation every time. (Additional AquaTronic functions for electronic supervision are explained on pages 16-17.) 2 Clog-free pumping the pump ideal for pumping solids. The impeller is ments. 3 Reliable operation Both the impeller and volute are made from heavyduty ductile iron for maximum durability. Double mechanical shaft seals in an oil bath, with primary seal surfaces in silicon carbide and secondary seal surfaces in silicon carbide on carbon, extend the life of the pump. A double cable-entry seal system increases the protection against moisture entering the electrical junction area. 3 6 1 Convenient handling The top cover and motor housing are made of lightweight aluminum, which creates a pump that is very easy to handle and install. Serviceability Due to the modular design, the same parts can be used for different pumps, which lowers the overall service costs. External inspection ports for the oil and motor chambers enable quick and easy evaluation of the shaft seal during service. By removing the top cover of the pump, the electrical junction area can easily be checked. 3 2 6 Less energy and environmental impact with low-friction bearings to reduce power losses. The result is low total energy costs and minimized carbon footprint. 1
SUBMERSIBLE SLUDGE PUMP TYPE ABS XJS 2 XJS 2 D* -128 XJS 2 D* -13 m 2 16 XJS2-AA Hz Motor rating P2 2. kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 8.8 /.1 /.1 / 2.9 / 2. 292 rpm Free passage x mm Discharge connections Hose 2½, 3, Thread G/BSP 2½, 3, Weight (excl. cable) 39 kg 2 m 12 13 8 128 8 12 16 2 l/s 1 2 3 6 7m 3 /h 6 Ø 27 2 7 7 SUBMERSIBLE SLUDGE PUMP TYPE ABS XJS XJS D* -13 XJS D* -16 m 3 2 XJS-AA Hz Motor rating P2 3.7 kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 13.2 / 7.6 / 6.1 /. / 3. 286 rpm Free passage x mm Discharge connections Hose 2½, 3, Thread G/BSP 2½, 3, Weight (excl. cable) 1 kg 2 m 2 16 1 13 1 8 12 16 2 l/s 1 2 3 6 7m 3 /h 6 Ø 27 2 7 7 SUBMERSIBLE SLUDGE PUMP TYPE ABS XJS XJS D* -16 XJS D* -17 m 3 2 XJS-AC Hz Motor rating P2.6 kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 19.7 / 11.3 / 9. / 6.6 /. 293 rpm Free passage 8 x 6 mm Discharge connections Hose 2½, 3, Thread G/BSP 2½, 3, Weight (excl. cable) 9 kg 2 m 2 1 1 1 16 17 2 l/s 3 6 9 m 3 /h 6 Ø 28 8 78 SUBMERSIBLE SLUDGE PUMP TYPE ABS XJS 8 XJS 8 D* -17 XJS 8 D* -19 Motor rating P2 8.3 kw, 3~ Voltage (V) 23 / / - / 69 / 1 Full load (A) 27.8 / 16 / 12.8 / 9.3 / 6. 292 rpm Free passage 8 x 6 mm Discharge connections Hose 2½, 3, Thread G/BSP 2½, 3, Weight (excl. cable) 6 kg Motor protection Built in 2 m m 3 3 2 2 19 1 17 1 1 2 3 l/s 3 6 9 m 3 /h XJS8-AD Hz 6 Ø 28 8 78 * Option: AquaTronic, built-in electronic pump control. 1
AquaTronic and Other Supervision Options Submersible dewatering pump types ABS XJ, XJC and XJS have several options for electronic supervision that make them even more reliable and easy to use. Most important is the AquaTronic unit, which ensures correct motor rotation every time. AquaTronic The AquaTronic unit replaces the built-in contactor in motor always rotates correctly, no matter how the unit include: Correction of motor rotation if phases are improperly connected Run mode Integrated start equipment (direct or soft start depending on pump model) Motor protection against high temperature, high amperage and missing phase If the pump is also equipped with an optional Level Sensor, AquaTronic provides: Precise level control Protection against dry running AquaTronic Service Diagnostic Program Connecting a PC to the AquaTronic unit via USB cable provides access to the Service Diagnostic Program, which offers: Pump status data (temp, voltage, moisture, etc.) Pump operating history Pump failure history Pump service and maintenance history Digital manual and spare parts documentation AquaPlug and AquaPanel AquaPlug and AquaPanel are options that combine with AquaTronic to provide additional alarm and start/ stop functions, as well as indications for important parameters. AquaPlug is incorporated into the power line via 16A or 32A sockets, while AquaPanel is integrated into the control cabinet. Service Diagnostic Program via USB contact AquaTronic Levelsensor AquaPlug or AquaPanel 16
Overview of electronic supervision features The table below shows the range of features available when the AquaTronic unit and other electronic supervision options are used with the submersible drainage pump types ABS XJ, XJC and XJS. Electronic supervision feature Basic pump with contactor Pump with AquaTronic Pump with AquaTronic + Level Sensor Pump with AquaTronic + AquaPlug/ AquaPanel Pump with AquaTronic + AquaPlug/ AquaPanel + Level Sensor Run mode Integrated start equipment Automatic correction of rotation Motor protection high temp Motor protection high amp Protection against missing phase Level control Protection against dry running Automatic restart Stop mode E-mode (automatic stop/run) Indication of water in oil Indication of low motor insulation Indication of high/ low voltage Indication of high temp Indication of high amp Indication of phase imbalance USB cable connection = Fault indication when pump is automatically stopped to protect the motor 17
Pump Options and Accessories AQUATRONIC UNIT FOR CORRECT MOTOR ROTATION Our built-in AquaTronic unit integrates electronic intelligence into the pump, ensuring - The workshop manual and spare parts list, readily available in the AquaTronic unit, can be viewed via the link as well. The AquaTronic unit must be ordered when ordering the AQUAPLUG AND AQUAPANEL AquaPlug and AquaPanel are options that combine with AquaTronic to provide addi- AquaPlug is incorporated into the power line via 16A or 32A sockets, while AquaPanel is integrated into the control cabinet. LEVEL SENSOR FOR PRECISE AND COST EFFECTIVE WATER LEVEL CONTROL level control, and helps lower power consumption. SOFTDRIVE FOR COST EFFECTIVE OPERATION ment. The pump can be started with a smaller-sized generator compared to a standard pump started directly on-line. QUICK AND EASY INSTALLATION WITH FLOATATION RING used with dewatering pumps J/JS 12-1, XJ/XJS 2-. FLOATATION SYSTEM TO PREVENT UNNECESSARY WEAR XJ -8, XJS -8, J 2-6. 18
PROTECTIVE BELTS FOR MORE DURABLE OPERATION - - POLYURETHANE FOR PROLONGED DRAINAGE PUMP LIFE sand and other abrasive mediums. Polyurethane-coated wear rings are available as an option on J 2-6. SERIES CONNECTIONS FOR PUMPING HIGH HEADS BOTTOM SUCTION ADAPTER FOR TOTAL WATER REMOVAL On pumps J 12-1 and J 2, the standard bottom plate may be replaced by a bottom adapter. REPAIR KITS THAT SAVE TIME AND MONEY 19
www.sulzer.com E1361 en.21 (1,), Copyright SULZER Ltd. 21