LUXMATE Lighting Control System LUXMATE. The ing system for maximum quality and dimming convenience. SMART BASIC BASIC-IR DAYLIGHT
The art of modern technology lies in making complicated things simple. Components for ing solutions. LUXMATE makes it possible for you to produce creative ing solutions. With its fully electronic gear such as PCA ballasts and TEL transformers you can dim a range of lamps on demand. By means of devices like the units and sensors individual installations can be realised. From simple with push to make switches, to more complex using building management systems LUXMATE covers all demands. The technology concept guarantees maximum flexibility today and future security.. 2
Perfect quality. People receive about 80% of all information via their eyes. Light gives us sight. Therefore the better the is suited to a particular situation, the more precisely information can be gathered, and feeling and mood absorbed. With LUXMATE different sources can be dimmed ly and therefore exactly. LUXMATE satisfies the requirements of optimal ing level and adjusts for individual ing needs.the LUXMATE ballasts and transformers utilise a logarithmic dimming curve, that is adjusted to the requirements of the human eye. Dimming Characteristics Digital dimming value 255 240 225 210 195 180 165 150 135 120 105 90 75 60 45 30 15 0 0 10 20 30 40 50 60 70 80 90 100 Relative ing level % LUXMATE dimming characteristics as seen by the human eye The human eye is very sensitive in the range of 0 to 10 %, where irregular or sudden changes are uncomfortable. The unique concept with the logarithmic curve provides a comfortable change between 0 and 100 %. Together with the precise provided by the units the fully electronic PCA ballasts and TEL transformers have the technological means to provide perfect ing quality. 3
High-grade, LUXMATE technology guarantees the highest convenience and individual system integration. Digital technology. A specially developed ASIC (Application Specific Integrated Circuit) and modern power electronics together with (Digital Serial Interface) units form the peak of ing. Unlike the 1-10 V system which uses analogue signals the LUXMATE system uses code. In this way all the disadvantages of the older analogue system can be overcome and new possibilities of ing can be realised. Advantages of the LUXMATE System All luminaires receive precisely the same disturbance proof signal and give the same output. Simple wiring with 5 core standard cable (2 x leads and 3 x mains leads). The non-polar wires simplify the wiring and remove a source of failures. Possible faults on the bus connection are recognised, false signals are ignored, and the output remains at the last correct value. Failure signals (e. g. lamp failure) can be recognised by the unit, integration of the return failure signal in available information channels for central processing is possible. Capable of dimming and switching (ON/OFF) with push to make switches. Multipoint with parallel switches. Simple installation despite higher functionality. constant day Simple push to make switches can be used to switch, dim and even program ing installations. With this flexible and open system concept there are no limits: IR, day linked or integration into building management systems (EIB, LON- WORKS ) are only a few possibilities. 4
Economy and quality. Energy Savings Mains power in % 100 90 80 70 60 50 40 30 20 10 0 With the LUXMATE system energy savings of up to 70 % are possible. Such high savings come from both the economical operation of the lamp and from linking of the PCA ballasts and TEL transformers with day sensors and presence detectors. Through the use of high grade components LUXMATE units have a mean service life of 50,000 hours within the permissible temperature range and a MTBF value of 400,000 hours. In addition lamp life will be positively influenced by the use of the LUXMATE system. 100 90 80 70 60 50 40 30 20 15 10 5 4 3 2 1 Dimming level in % Long term tests show that through the use of optimised warm start of the lamp (pre-heating of the cathodes) the switching frequency of the lamp can be increased dramatically compared with cold start. The exact of brightness and power means that operation in the dimmed mode has no negative influence on lamp life. The LUXMATE units have comprehensive safety features. The PCA is constantly monitoring it's own performance and the lamp, defective lamps will automatically be shut down and automatically restarted after lamp change. All LUXMATE PCA ballasts and TEL transformers meet all relevant European norms for safety, performance, quality and EMC (including RFI, harmonics) and are certified by European test houses. 5
The unique fully electronic LUXMATE components provide a basis for the perfect ing system. PCA EXCEL Fully, electronic ballast for dimming of T8, 26 mm linear fluorescent lamps (18 58 W) and T5, 16 mm linear fluorescent lamps, single and twin lamp versions. Dimming range 1 100 %, preheat lamp start at 1 %. -, SMARTand switchdim-, slimline housing 28x30x360 mm. PCA ECO Fully, electronic ballast for dimming of T8, 26 mm linear fluorescent lamps (18 58 W), single and twin lamp versions. Dimming range 10 100 %, preheat lamp start. -, SMART- and switchdim-, slimline housing 28x30x360 mm. PC-A011 TCL Fully, electronic ballast for dimming of TCL compact fluorescent lamps (18 55 W), single and twin lamp version. Dimming range 1 100 %, preheat lamp start at 10 %. -Interface. PC-A111 Fully, electronic ballast for dimming of compact fluorescent lamps (11 42 W). Dimming range 3 100 %, preheat start at 10 %. -Interface. TEL Fully, electronic safety isolating transformer (20 210 VA). Dimming range 1 100 %. -Interface. 6
Easy installation for cost effective energy efficient ing solutions. SMART Components for intelligent luminaires. SMART-LS sensor for simple constant systems and - SMART for complex applications. constant remote IR presence detection -SMART signal PCA / TEL / PHD LUXMATE BASIC Simple with standard push to make switches and presence detectors as well as operation in existing systems. presence detection LUXMATE BASIC Module LONWORKS 1-10 V LUXMATE BASIC cutting edge dimmer signal PCA / TEL / PHD LUXMATE BASIC-IR Convenient with multichannel infrared hand ler and sensor. remote IR 3 scenes LUXMATE BASIC-IR Module signal PCA / TEL / PHD LUXMATE DAYLIGHT User friendly, day linked with presence detectors for maximum energy savings. presence detection day LUXMATE DAYLIGHT Module signal PCA / TEL / PHD 7
Constant, simple switch or integration into complex systems: LUXMATE units provide varied solutions. SMART-LS The SMART-LS in combination with the PCA EXCEL or the PCA ECO ballasts makes it possible for simply constructed cost effective systems producing constant ing levels. The sensor measures the actual surrounding level and maintains a constant level at the value set by the user. -SMART Intelligent module that combines ambient measurement, present detection and Infra-red remote. Programmable parameters. Max. 4 Luxmate devices can be led. constant constant -T User friendly dimming and on/off switching by means of freely available standard single or twin push to make switches. By the connection of a PIR sensor the LUXMATE PCA/TEL/PHD units will be switched automatically via the wires. Max. 25 LUXMATE devices can be led. -TD User friendly dimming and on/off switching with a freely available single or twin push to make switch. With the connection of an additional switch a pre-set dimming level can be programmed which can be recalled any time. Max. 25 LUXMATE devices can be led. -TS User friendly dimming and on/off switching by means of freely available standard single or twin push to make switches. Max. 100 LUXMATE devices can be led. -EIB / -EIBS Allows the connection of LUXMATE PCA/TEL/PHD units to an EIB system (European Installation Bus). The translation of EIB signals allows the LUX- MATE units to switch, dim as well as send failure messages back via the EIB Bus. Max. 50 LUX- MATE devices can be led. 8
-LON / -LONS Allows the connection of LUXMATE PCA/TEL/PHD units to a LON network. The translation of LON signals allows the LUXMATE units to switch, dim as well as send failure messages back via the LON Bus. 3 channels, max. 15 LUXMATE devices per channel can be led. -AD / -ADS Translates the 1-10V analogue signal into a signal. In this way LUXMATE PCA/TEL/PHD units can be integrated into existing analogue systems. Max. 100 LUXMATE devices can be led. -F / IRS The -F is the module for infrared and simple push to make switch. The IRS ler makes it possible to program up to 3 scene sets. Max. 25 LUXMATE devices can be led. -TLC Digital module for with day linking of 2 ing groups each with a maximum of 25 LUXMATE units (PCA/TEL/PHD). Simple programming of the day linking for each channel. Manual dimming and on/off switching with a freely available single or double push to make switch. By the connection of a PIR sensor the LUXMATE PCA/TEL/PHD units will be switched automatically via the wires. 3 scenes day -TLE PHD / PD-TD / PAD-TD Digital module for with day linking of 3 ing groups each with a maximum of 100 LUX- MATE units (PCA/TEL/PHD). Simple programming of the day linking for each channel. Manual dimming and on/off switching with a freely available single or double push to make switch. By the connection of a PIR sensor the LUXMATE PCA/TEL/PHD units will be switched automatically via the wires. The modules changes commands so that the lamp receives the same supply as it would from a phase cutting dimmer. The connected load may be in the range 30-300 VA (PHD) or 30-1000 VA (PD-TD, PAD-TD). As an option the PD-TD/PAD-TD can be led with a push to make switch. Conventional single or twin switches provide dimming and on/off switching. With the connection of an additional switch a pre-set dimming level can be programmed which can be recalled at any time. day 9
LUXMATE ing system: Perfection through flexibility. SMART BASIC constant constant SMART-LS -SMART PCA EXCEL -T -TD -TS -Signal PCA ECO -Signal -Signal -Signal TE-L PC-A 111 PC-A 011 10
BASIC BASIC-IR DAYLIGHT day -EIB -LON -AD 3 scenes -F -TLC -TLE -EIBS -LONS -ADS IRS -Signal -Signal -Signal -Signal -Signal -Signal 2-channels 3-channels PCA EXCEL PHD PAD-TD PD-TD PCA ECO electronic transformer 11
LUXMATE System Components Type Function PCA Ballasts PC-A 011 PC-A 111 PCA ECO PCA EXCEL dimmable ballasts, 1%-100%, 10% Start, linear fluorescent lamps 18-58W; TCL 18-55 W dimmable ballasts, 3%-100%, 10% Start, compact fluorescent lamps 11-42 W dimmable ballasts,10%-100%, 10% Start, linear fluorescent lamps 18-58 W; SMART dimmable ballasts,1%-100%, 1% Start, linear fluorescent lamps 18-58 W; SMART Type Article number Function SMART Sensor SMART-LS 24011257 SMART ambient sensor -SMART 24031280 constant, presence detector, IR LUXMATE Control modules LUXMATE BASIC -T 20975272 push to make switch -TS 20735419 push to make switch for DIN rail -TD 20975439 push to make switch with preset PHD 20724776 -phase-cutting dimmer 300VA PD-TD 20975509 phase-cutting falling edge 1 KVA PAD-TD 20975518 phase-cutting rising edge 1 KVA -AD 20823263 Interface for analogue input -ADS 24011314 Interface for analogue input for DIN rail -EIB 20827097 EIB-Interface EIBP 20827379 product database for -EIB -EIBS 24030297 EIB-Interface for DIN rail -LON 24011336 LON-Interface -LONS 24011342 LON-Interface for DIN rail LONP 24030313 program disk (XIF) for -LON -V 20975705 amplifier for signals LUXMATE BASIC IR -F 20725124 IR without sensor IREL 20725171 IR sensor for building into luminaires IRED 20725165 IR sensor for ceiling mounting IRS 20975492 IR remote LUXMATE DAYLIGHT -TLC 20975294 day linking 2 channel -TLE 20735573 day linking 3 channel LSD 20731906 sensor for day linking Address: TRIDONIC-Bauelemente Gesellschaft mbh Schmelzhütterstraße 34, 6851 Dornbirn/Austria Tel. ++43/55 72/395-0, Fax ++43/55 72/2 0176 www.tridonic.com 24031738/10/98 We reserve the right to make technical changes without prior notice. 100 % recycled paper.