Laboratory glassware > washing system devoted to hygiene For the Environmentally conscious
> Laboratory glassware washing system Steelco Laboratory Glass Washers are at the forefront of knowledge and research guaranteeing the user tested and consistently efficient washing results. Steelco offers a large range of machines, baskets and inserts which have been specially developed to meet the user needs. ISO 9001:2008 > LAB 500 > LAB 500 CL > LAB 600 > LAB 610-2 -
> Full range > Steelco Laboratory glassware washers are designed and constructed to comply with the latest European and UK guidelines on decontamination. > EN 61010-1, EN 61010-2-040, EN 61326, directive 98/37/ EEC, directive 06/95/EEC, directive 89/336/EEC and 92/31/EEC and 93/68/EEC > LAB 680 > LAB 1000-3 -
> Cleaning effectiveness > Steelcotronic Control System, with its auto-diagnostic checking constantly monitors and displays current cycle status and alarms. It allows the user to optimise the washing process and to personalise on board programmes in the machine. > The Mechanical action is one of the main elements for effective cleaning during the washing process. Steelco has customised the washing pumps and circuits of each model ensuring high flow rate combined with effective spray pressure. > Up to four liquid dispensing systems are included for detergent dosing. > Inner cabinet, washing arms and tank filters made of high quality AISI 316 L stainless steel (DIN 1.4404). > External cabinet made of AISI 304 stainless steel (DIN 1.4301). > Construction system with total removal of angles. > Self cleaning tank with rounded edges. - 4 -
> Key features > Three water connections are available, cold, warm and DI water. Between each cleaning and disinfection phase water is drained and fresh water is introduced for the following phase. Boiler for pre-heating of DI water option is available. The triple water filtering system enables residue to be captured and not recirculated and saves the pump life. > Double wall construction and excellent insulation reduce heat loss and power consumption. > Large capacity of water softener for a continuous supply of softened water available. > Water purificator system available. > Water filtering system in three levels. > Direct coupling system for various mobile injector units. - 5 -
Laboratory glassware washer > LAB 500 > LAB 500 is a laboratory glassware under counter washer designed to handle large types of glassware where complete drying is not requested. > Chamber volume 171 lt > Basket volume 151 lt washing injection system on two independent levels without air drying WASHING CHAMBER > Option - Stand - Boiler to pre-heat DI water - Glass door - Two levels wide detergent compartment to store up to four 5 lt. chemical containers. - 6-1 440 mm 2 170 mm 3 210 mm
> Key features - RS 232 port is provided with printer connection for monitoring and validating washing phases. - Led display with five adjustable washing programs for laboratory glassware available. - Telescopic bearing rails enable easy and safe loading/unloading of the glassware. - Washing and DI disinfection temperature are fully adjustable up to 90 C. Temperature is monitored by two independent sensors. - Standard steam condenser eliminates vapors from entering into the laboratory. - Heavy washing pump ensures high flow rate combined with effective spray pressure. - Washing injection system on two levels. - Inner cabinet, washing arms and tank filters made of high quality AISI 316 L stainless steel. - Triple water filtering system captures residue preventing re-circulation and extending the pump life. - Two automatic liquid dispensers are standard. One more dispenser is available. - Steelco LAB 500 accepts a variety of interchangeable standard and injection baskets used in LAB 500 CL. > Connections Electrical connection Power Pump power Noise Permitted room temperature 400 Vac 3 N+T / 50Hz 5600 W 550 W 52 db(a) +5 C / +40 C > Optional - Extra power 8 KW - 3 rd Chemical dosing pump - External printer ST1 600 630 850 Min. 300 Max. 800 240 540 100 70 510 560 1 Warm water connection ¾ male DN 20 mm 2 Cold water connection ¾ male DN 20 mm 3 Demineralized water connection ¾ male DN 20 mm 4 Electrical connection 5 Machine drain Ø 25 mm - 7 -
Laboratory glassware washer > LAB 500 CL > LAB 500 CL is specially designed for laboratories with limited space. A powerful filtering air drying system is a feature of this under bench laboratory glassware washer. Washing and air drying on 2 levels, normally seen on large machines, has been incorporated into this small model. > Chamber volume 171 lt > Basket volume 151 lt > Option - Stand - Boiler to pre-heat DI water - Glass door - Two levels wide detergent compartment to store up to four 5 lt. chemical containers. - 8-1 440 mm 2 170 mm 3 210 mm
> Key features - Forced air drying system with adjustable time and temperature setting, helps to ensure completely dry, inside and outside, of all the glassware. - RS 232 port is provided with printer connection for monitoring and validating washing phases. - LCD display and availability of 40 programs for laboratory glassware. - Telescopic bearing rails enable easy and safe loading/unloading of the glassware. - Washing and DI disinfection temperature are fully adjustable up to 90 C. Temperature is monitored by two independent sensors. - Standard steam condenser helps to eliminate vapors from entering into the laboratory. - Heavy washing pump ensures high flow rate combined with effective spray pressure. - Washing injection system and drying on two levels. - Inner cabinet, washing arms and tank filters made of high quality AISI 316 L stainless steel. - Triple water filtering system captures residue preventing re-circulation and extending the pump life. - Two automatic liquid dispensers are standard. One more dispensers is available. - Steelco LAB 500 CL accepts a variety of interchangeable standard and injection baskets used even in LAB 500. > Connections Electrical connection Power Pump power Noise Permitted room temperature 400 Vac 3 N+T / 50Hz 5600 W 550 W 56 db(a) +5 C / +40 C Dryer blower 150 m 3 /h Dryer heating 2000 W > Optional - Extra power 8 KW - 3 rd Chemical dosing pump - HEPA H14 air filter - External printer ST1 600 600 630 15 850 4 850 150 Min. 300 Max. 650 7 6 750 240 540 70 510 560 1 Warm water connection ¾ male DN 20 mm 2 Cold water connection ¾ male DN 20 mm 3 Demineralized water connection ¾ male DN 20 mm 4 Breather pipe chamber Ø 50 mm 5 Electrical connection 6 Machine drain Ø 25 mm 7 Steam condenser Ø 25 mm - 9 -
Laboratory glassware washer > LAB 600 > LAB 600 front loading laboratory glassware features are the adjustable upper washing/drying levels and a powerful built-in HEPA filtered forced air drying system. The upper level can be placed at two different water/air connections depending on the height of the loaded glassware. > Chamber volume 200 lt > Basket volume 170 lt Front panel USB port available as optional - 10-1 440 mm 2 210 mm 3 140 mm 4 170 mm 5 240 mm
> Key features - RS 232 port is provided with printer connection for monitoring and validating washing phases. - Ergonomic design of the door level height allows to the user a convenient loading/unloading job with the support of a manual loading/unloading trolley. - Door provided with glass window. - Telescopic bearing rails enable easy and safe loading/unloading of the glassware. - Filtered forced air drying system with adjustable time and temperature setting, helps to ensure the complete inside and outside drying of all the glassware. - LCD display with 20 standard programs for laboratory and 20 additional custom programs is available. - Washing and DI disinfection temperature are fully adjustable up to 90 C. Temperature is monitored by two independent sensors. - Standard steam condenser eliminates vapors from entering into the laboratory. - Heavy washing pump ensures high flow rate combined with effective spray pressure. - Washing/drying injection system on three levels. - Inner cabinet, washing arms and tank filters made of high quality AISI 316 L stainless steel. - Triple water filtering system captures residue preventing re-circulation and extending the pump life. - Two standard automatic liquid dispensers provided with level control. Two more dispensers are available. - Possibility to store up to four 5 lt. containers into the basement. - Steelco LAB 600 accepts a variety of interchangeable standard and injection baskets used also in LAB 610 models. > Connections Electrical connection 400 Vac 3 N+T / 50Hz Power 8250 W Pump power 750 W Noise 56 db(a) Permitted room temperature +5 C / +40 C Dryer blower 150 m 3 /h Dryer heating 2000 W > Optional - 3 rd and 4 th Chemical dosing pump - built in water softner - HEPA H14 air filter - Integrated printer ST2 30 air flow breather 4 235 585 1685 606 692 70 5 550 6 1-2-3-8 630 5 6 530 3 1 2-8 useful space 565 60 790 7 98 200 135 600 98 650 50 660 floor drain wall drain 1 Warm water connection ¾ male DN 20 mm 2 Cold water connection ¾ male DN 20 mm 3 Demineralized water connection ¾ male DN 20 mm 4 Breather pipe chamber Ø 50 mm - 11-5 Electrical connection 6 Machine drain Ø 25 mm 7 Steam condenser Ø 25 mm 8 Steam condenser cold water connection ¾ male DN 20 mm
Laboratory glassware washer > LAB 610 > LAB 610 glassware is a larger model, frontal loading, with HEPAfiltered forced air drying, four washing/drying positions and three washing/drying levels. The upper level can be placed at two different water/air connections depending on the height of the loaded glassware. This machine can be used also to clean large bottles (20,50,60 lt.). > Chamber volume 250 lt > Basket volume 220 lt Front panel USB port available as optional - 12-1 590 mm 2 400 mm 3 300 mm 4 180 mm 5 130 mm 6 230 mm 7 350 mm 8 160 mm 9 60 mm
> Key features - RS 232 port is provided with printer connection for monitoring and validating washing phases. - Ergonomic design of the door level height allows the user a convenient loading/unloading job with the support of a manual loading/unloading trolley. - Door provided with glass window. - Telescopic bearing rails enable easy and safe loading/unloading of the glassware. - Filtered forced air drying system with adjustable time and temperature setting, helps to ensure the complete inside and outside drying of all the glassware. - LCD display with 20 standard programs for laboratory and 20 additional Custom programs are available. - Washing and DI disinfection temperature are fully adjustable up to 90 C. Temperature is monitored by two independent sensors - Standard steam condenser eliminates vapors from entering into the laboratory. - Heavy washing pump ensures high flow rate combined with effective spray pressure. - Washing/drying injection system on four levels. - Inner cabinet, washing arms and tank filters made of high quality AISI 316 L stainless steel. - Triple water filtering system captures residue preventing re-circulation and extending the pump life. - Two standard automatic liquid dispensers provided with level control. Two more dispensers available. - Possibility to store up to three 5 lt. containers into the basement. - Steelco LAB 610 accepts a variety of interchangeable standard and injection baskets used also in LAB 600 models. > Connections Electrical connection 400 Vac 3 N+T / 50Hz Power 8250 W Pump power 750 W Noise 57.5 db(a) Permitted room temperature +5 C / +40 C Dryer blower 250 m 3 /h Dryer heating 3000 W > Optional - 3 rd and 4 th Chemical dosing pump - Water softner - HEPA H14 air filter - Integrated printer ST2 650 air flow breather 5 5 5 540 790 585 useful space 715 690 1840 5 60 200 790 550 8 3 2 1 7 6 500 6 7 3 1 2-8 100 6 7 3 1 2-8 269 600 floor drain wall drain 50 690 1 Warm water connection ¾ male DN 20 mm 2 Cold water connection ¾ male DN 20 mm 3 Demineralized water connection ¾ male DN 20 mm 4 Breather pipe chamber Ø 60 mm - 13-5 Electrical connection 6 Machine drain Ø 25 mm 7 Steam condenser Ø 25 mm 8 Steam condenser cold water connection ¾ male DN 20 mm
Laboratory glassware washer > LAB 680 > LAB 680 large capacity glassware is specially developed for laboratories that require to clean large quantities of items on a daily basis. Five washing/drying positions and four washing/ drying levels feature on this machine, which also incorporates a powerful filtered pulsed hot air system. This machine is capable of cleaning bottles up to 100 Lt. The upper levels can be placed at different water/air connections depending on the height of the loaded glassware. > Chamber volume 600 lt > Basket volume 430 lt - 14-1 730 mm 2 570 mm 3 440 mm 4 330 mm 5 110 mm 6 75 mm 7 50 mm 8 140 mm 9 130 mm 10 240 mm 11 250 mm 12 350 mm 13 540 mm
> Key features - RS 232 port is provided with printer connection for monitoring and validating washing phases. - Ergonomic design of the door level height allows to the user a convenient loading/unloading job with the support of manual loading/unloading trolley. - Door provided with glass window. - Telescopic bearing rails enable easy and safe loading/unloading of the glassware. - Filtered forced air drying system with adjustable time and temperature settings, helps to ensure the complete inside and outside drying of all the glassware. - LCD display with 20 standard programs for laboratory and 20 additional Custom programs are available. - Washing and DI disinfection temperature are completely adjustable up to 90 C. Temperature is monitored by two independent sensors - The optional steam condenser eliminates vapors from entering into the laboratory. - Heavy washing pump ensures high flow rate combined with effective spray pressure. - Washing/drying injection system on five levels. - Inner cabinet, washing arms and tank filters made of high quality AISI 316 L stainless steel. - Triple water filtering system captures residue preventing re-circulation and extending the pump life. - Two standard automatic liquid dispensers provided with level control. Two more dispensers available. - Possibility to store up to four 5 lt. containers into the basement. - Steelco LAB 680 accepts a variety of interchangeable standard and injection baskets. > Connections Electrical connection 400 Vac 3 N+T / 50Hz Power 20000 W Pump power 550 W + 900 W Noise 58 db(a) Permitted room temperature +5 C / +40 C 2 Dryer blowers 2 x 350 m 3 /h Dryer heating 7800 W > Optional - 3 rd and 4 th Chemical dosing pump - HEPA H14 air filter - Integrated printer ST2 - Flow meters 1140 adj. open connection 1140 5 830 660 2000 845 490 1 2 315 300 3 200 360 60 750 557.5 7 6 4 5 915 1110 1 2/3 1 Warm water connection ¾ male DN 20 mm 2 Cold water connection ¾ male DN 20 mm 3 Demineralized water connection ¾ male DN 20 mm 4 Breather pipe chamber Ø 120 mm - 15-5 Electrical connection 6 Machine drain Ø 45 mm 7 Floor drain Ø 50 mm
Laboratory glassware washer > LAB 1000 > For organizations that need a centralized washing area, separated from the laboratory, LAB 1000 is organized as a single door or pass through, to receive glassware on carts which after the cleaning and drying process will be transferred back to the laboratory for re-use. A 500 mc/h HEPA filtered forced air drying system with adjustable time and temperature settings, helps to ensure the complete inside and outside drying of all the glassware. > Chamber volume 500 lt > Basket volume 350 lt - 16 -
> Key features - Ethernet connection. - Ergonomic design of the door level height allows to the user a convenient loading/unloading job with the support of manual loading/unloading trolley. - Automatic motorized single or double glass doors, vertical sliding. - Baskets injection connection system to the washing water pipe. - HEPA filtered forced air drying system with adjustable time and temperature settings, helps to ensure the complete inside and outside drying of all the glassware. Air drying distribution on all chamber and basket injectors. - Touch screen color display with 65 programs for laboratory is available. - Washing and DI disinfection temperature are fully adjustable up to 90 C. Temperature is monitored by two independent sensors. - Steam condenser optional eliminates vapors from entering into the laboratory. - Two heavy washing pumps provide to ensure high flow rate combined with effective spray pressure. - Washing/drying modular injection supports on two levels. - Inner cabinet, washing arms and tank filters made of high quality AISI 316 L stainless steel. - Triple water filtering system captures residue preventing re-circulation and extending the pump life. - Two standard automatic liquid dispensers provided with level control. Two more dispensers are available. - Possibility to store up to four 10 lt. containers into the basement. - Steelco LAB 1000 accepts a variety of interchangeable standard and injection baskets. > Connections Electrical connection 400 Vac 3 N+T / 50Hz Power 20000 W Pump power 550 W + 900 W Noise 58 db(a) Permitted room temperature +5 C / +40 C Dryer blower 500 m 3 /h Dryer heating 7800 W > Optional - 3 rd and 4 th Chemical dosing pump - HEPA H14 air filter - Integrated printer ST3 1140 740 adj. open connection 1900 810 810 2355 100 357,5 490 315 1110 200 360 850 60 880 850 915 557,5 1140 220 147,5 220 85 915 1 Warm water connection ¾ male DN 20 mm 2 Cold water connection ¾ male DN 20 mm 3 Demineralized water connection ¾ male DN 20 mm 4 Breather pipe chamber Ø 120 mm - 17-5 Electrical connection 6 Machine drain Ø 45 mm 7 Floor drain Ø 50 mm
Laboratory glasses dryer > LAB DRYER for LAB 500 - LAB 500 C > Key features - Filtered air dryer (HEPA optional) 150 mc/h. - Dryer heating W 2000. - Double temperature check, one inside the chamber and one into the air dryer. - LED display. - 2 adjustable drying programs, 20 and 30 min. and one program to maintain temperature. - Door provided with glass window (optional). - Electrical connection 230V single phase - 10 Amp. > Chamber volume 151 lt > Basket volume 137 lt 1 440 mm 2 170 mm 3 210 mm 600 630 > Connections Drain pipe Diam. 25 mm Electrical connection 230V / 50Hz 850 240 540 Power Noise Permitted room temperature 2000 W 52 db(a) +5 C / +40 C 70 510 560 E Electrical connection - 18 -
Accessories > Inserts C61 > insert with 28 spring hooks for laboratory glassware C63 > net basket mm.120x120x120 C64 > cover for C64 C97 > 30 positions insert for Petri dishes C70 > net basket 1/4 mm. 200 h C68 > net basket 1/4 mm. 100 h C69 > net basket 1/4 mm. 130 h C77 > cover for C68/69/7 Detergent cabinet C86 > net separator for 1/4 net basket - Two levels wide detergent compartment to store up to four 5 lt. chemical containers. Water purification system DI water rinsing helps to ensure the removal of detergent residues and grants effective cleaning results. - Stainless steel water purificator container mm 300 x 630 x 840 h - Provided with 10 lt resin plastic cartridge - mm 500 h - ø mm 210 - Equipped with priming and pressure relief valve and conductivity system pressure proof up to 10 bar - 19 -
Accessories > Baskets for models LAB 500, 500 C only C711 > upper basket 36 jets mm. 80/110 h - ø mm. 6 C712 > upper basket 25 jets mm. 140/170H - ø mm. 6 C713 > upper basket 18 jets mm. 80/110 h ø mm. 6 C714 > upper basket 10 jets mm. 140/170 h ø mm. 6 C715 > lower basket 36 jets mm. 80/110 h - ø mm. 6 C716 > lower basket 25 jets mm. 140/170H - ø mm. 6 C717 > lower basket 12 jets mm. 80/110 h - ø mm. 6-20 -
C723 > upper mixed basket for centrifuge tubes, vials, test tubes with 121 positions + 18 injectors mm. 80/110 h - ø mm. 6 C721 > upper basket with washing arm C720 > lower basket with 2 pipettes cassettes max length 300mm C718 > lower basket 10 jets mm. 140/170 h - ø mm. 6 C719 > lower vertical pipettes basket 120 positions C52L > lower basket - 21 -
Accessories > Baskets for models LAB 600, 610 only C724 > upper basket 42 jets mm. 80/110 h - ø mm. 6 C725 > upper basket 20 jets mm. 140/170H - ø mm. 6 C726 > upper basket 24 jets mm. 80/110 h ø mm. 6 C727 > upper basket 12 jets mm. 140/170 h ø mm. 6 C729 > lower basket 42 jets mm. 80/110 h - ø mm. 6 C730 > lower basket 20 jets mm. 140/170H - ø mm. 6 C731 > lower basket 24 jets mm. 80/110 h - ø mm. 6-22 -
C746 > upper mixed basket for centrifuge tubes, vials, test tubes with 121 positions + 24 injectors mm. 80/110 h - ø mm. 6 C728 > upper basket with washing arm C733 > lower vertical pipettes basket 120 positions C732 > lower basket 12 jets mm. 140/170 h - ø mm. 6 C734 > lower basket with 2 pipettes cassettes max length 600mm C735 > lower basket with 3 pipettes cassettes max length 600mm C736 > lower basket - 23 -
Accessories > Baskets for models LAB 680 only C410 > upper basket 72 jets mm. 80/110 h - ø mm. 6 C411 > upper basket 56 jets mm. 140/170H - ø mm. 6 C412 > upper basket 40 jets mm. 80/110 h - ø mm. 6 C414 > lower basket 72 jets mm. 80/110 h - ø mm. 6 C415 > lower basket 56 jets mm. 140/170H - ø mm. 6 C416 > lower vertical pipettes basket 120 positions - 24 -
C413 > upper basket 32 jets mm. 140/170 h - ø mm. 6 C420 > upper basket with washing arm C421 > upper mixed basket for centrifuge tubes, vials, test tubes with 121 positions + 40 injectors C417 > lower basket with 2 pipettes cassettes max length 600mm C418 > lower basket with 3 pipettes cassettes max length 600mm C419 > lower basket - 25 -
Accessories > Baskets for model LAB 1000 only C400 > injection basket with removable levels Capacity: 2 x C402 cassettes into upper level + 2 x C403 cassettes into lower level. 1 x C402 cassette into upper level, 1 x C403 cassette into lower level and 1 x C401 pippettes cassette into lower level C401 > lower vertical pippettes cassette 120 positions C402 > upper cassette 32 jets mm. 80/110 h - ø mm. 6 C403 > lower cassette 22 jets mm. 140/170 h - ø mm. 6-26 -
Accessories > Inserts > Injection nozzle ø 2,5 mm with cone > Injection nozzle ø 2,5 mm with plastic cross Cod. C054906 H. 60/80 mm Cod. C054903 H. 60/80 mm > Injection nozzle ø 4 mm with plastic cross > Injection nozzle ø 6 mm with plastic cross Cod. C054904 Cod. C054924 H. 140/170 mm H. 70/100 mm Cod. C054905 Cod. C054922 Cod. C054910 Cod. C054921 H. 180/220 mm H. 140/170 mm H. 100/130 mm H. 80/110 mm > Injection nozzle ø 6 mm with plastic cross ø 54 mm and bottle support > Injection nozzle ø 6 mm with plastic cross ø 75 mm and bottle support Cod. C054911 Cod. C054909 H. 180/220 mm H. 100/130 mm Cod. C054908 H. 100/130 mm > Plastic cross ø 54 mm > Plastic cross ø 80 mm Cod. C054008 Cod. C054009 Cod. C054010 Ø 2,5 mm Ø 4 mm Ø 6 mm Cod. C402001 Ø 6 mm - 27 -
Accessories > Inserts > Bottle support for injection nozzle > Cap for pipe Cod. C054915 Ø 6 mm H. 200 mm Cod. C054916 Ø 6 mm H. 130 mm Cod. C054006 Cod. C054005 Ø 2,5 mm Ø 4 mm > Cap for pipe with two holes > Plastic cone Cod. C054007 Ø 6 mm Cod. C057007 Ø 16 mm > Spring for injection nozzle > Flat spring for injection nozzle Cod. C054016 Cod. C054015 Cod. C054014 Ø 2,5 mm Ø 4 mm Ø 6 mm Cod. C054029 Cod. C054027 Ø 4 mm Ø 6 mm > Cap for bottle support > Injection nozzles Cod. C054028 Ø 2 mm Cod. C102901 Ø 6 mm H. 170 mm - 28 -
> Injection nozzle Cod. C102903 Ø 4 mm H. 100 mm Cod. C102902 Ø 4 mm H. 170 mm > Injection nozzles Ø 6 mm tube Cod. C054917 Ø 6 mm H. 110 mm Cod. C054918 Ø 6 mm H. 130 mm Cod. C054919 Ø 6 mm H. 170 mm Cod. C054920 Ø 6 mm H. 220 mm > Injection nozzle support Cod. C054925 Ø 6 mm H. 110 mm Cod. C054926 Ø 6 mm H. 170 mm > Support for pipettes with silicone guard Cod. C058901 > Guard in silicone > Gasket for pipette cone Ø 6 mm Cod. C058003 Cod. C056003 Ø 25 mm H. 40 mm > Pipettes cone > Cap Cod. C401001 Ø 20 mm H. 22 mm Cod. C056001-29 -
Accessories > Inserts > Support for gasket pipette Ø 8 mm > Cap 15 x 15 Cod. C056002 Ø 25 mm H. 40 mm Cod. C054004 > Nozzle for washing pipe > Cap 25 x 25 Cod. C013003 Ø 25 mm H. 40 mm Cod. C080004-30 -
- 31 -
For the Environmentally conscious For the Environmentally conscious For the Environmentally conscious For the Environmentally conscious For the Environmentally conscious Pharmaceutical washing systems Pharmaceutical washing-systems devoted to hygiene Washer disinfectors > animal cages and feeding bottles devoted to hygiene Washer disinfectors Small/Medium Range Washer disinfectors > Small - Medium range Washer disinfectors CSSD Range - Systems and Automations Washer disinfectors > CSSD Range - Systems and Automations For the Environmentally conscious devoted d to hygiene devoted to hygiene Washer disinfectors for lifescience applications Dental washer disinfectors Dental washer disinfectors devoted to hygiene Flusher disinfectors > for hospitals and nursing houses devoted to hygiene Flusher disinfectors The products and technical specifications are subject to change wihout prior notice. Please consult your Steelco dealer for the latest information. devoted to hygiene STEELCO s.r.l Via Balegante, 27 31039 Riese Pio X (TV) - Italy Tel. ++39 0423 7561 Fax ++39 0423 755528 e-mail: steelco@steelcospa.com Web Site: www.steelcospa.com DC-PD-02-LAB UK Rev.05