IEC PROJETOS EM VOTAÇÃO IEC/TC 4 Hydraulic turbines IEC 62256/Ed2: Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement. IEC/TC 9 - Electrical equipment and systems for railways IEC 62888-1 Ed.1: Railway applications - Energy measurement on board trains - Part 1: General. IEC/TC 13 - Electrical energy measurement and control IEC 62056-5-3 Ed. 3.0, ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - Part 5-3: DLMS/COSEM application layer. IEC 62056-7-3: ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - Part 7-3: Wired and wireless M-Bus communication profiles for local and neighbourhood. IEC/TC 20 - Electric cables ATÉ 22 DE ABRIL DE 2016. IEC 60811-201: Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness. IEC 60811-202: Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath. IEC 60811-511: Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds. IEC 60811-401: Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven.
IEC 60811-410: Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors. IEC 60811-509: Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test). IEC 60811-508: Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths. IEC 60230: Impulse tests on cables and their accessories. IEC/TC 34 - Lamps and related equipment ATÉ 22 DE ABRIL DE 2016. IEC 60598-2-4 Ed.3: Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose luminaires. IEC 60598-2-17 Ed.2: Luminaires - Part 2-17: Particular requirements - Luminaires for stage lighting, television and film studios (outdoor and indoor). IEC 60598-1 Ed.8: Luminaires - Part 1: General requirements and tests. IEC/TC 38 - Instrument transformers IEC 61869-10: Instrument transformers - Part 10: Additional requirements for low power stand alone current sensors. IEC/TC 48 - Electrical connectors and mechanical structures for electrical and electronic equipment IEC 61587-1/Ed4: Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor conditions. IEC/TC 55 - Winding wires ATÉ 22 DE ABRIL DE 2016.
IEC 60317-67/Ed 1: Specifications for particular types of winding wires - Part 67: Polyvinyl acetal enamelled rectangular aluminium wire, class 105. IEC/TC 57 - Power systems management and associated information exchange IEC 61850-7-4 A1 Ed.2: Communication networks and systems for power utility automation - Part 7-4: Basic communication structure - Compatible logical node classes and data object classes. IEC/TC 61 Safety of household and similar electrical appliances ATÉ 03 DE ABRIL DE 2016. IEC 60335-2-30-A1/Ed5: Household and similar electrical appliances - Safety - Part 2-30:Particular requirements for room heaters. IEC 62115/Ed2: Electric toys - Safety. IEC 60335-2-35-A1/Ed5: Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters. IEC 60335-2-53-A1/Ed4: Household and similar electrical appliances - Safety - Part 2-53: Particular requirements for sauna heating appliances and infrared cabins. IEC 60335-2-109-A2/Ed1: Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances. IEC 60335-2-34/Ed5: Particular requirements for motor-compressors. IEC/TC 62 - Electrical equipment in medical practice IEC 62667: Medical electrical equipment - Medical light ion beam equipment - Performance characteristics. IEC/TC 64 Electrical installations and protection against electric shock ATÉ 22 DE ABRIL DE 2016. IEC 60364-5-55: Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment - Other equipment.
IEC 60364-7-704: Low-voltage electrical installations - Part 7-704, Requirements for special installations or locations - Construction and demolition site installations. IEC 62890 Ed. 1.0: Life-cycle management for systems and products used in industrial-process measurement, control and automation. IEC/TC 65 - Industrial-process measurement, control and automation ISO/IEC 20140-5 Ed. 1.0 Automation systems and integration - Evaluating energy efficiency and other factors of manufacturing systems that influence the environment - Part 5: Environmental influence evaluation data. IEC 61131-2 Ed 4.0: PROGRAMMABLE CONTROLLERS - Part 2: Equipment requirements and tests IEC 61131-2 Ed 4.0: PROGRAMMABLE CONTROLLERS - Part 2: Equipment requirements and tests. ATÉ 06 DE MAIO DE 2016. ISO/IEC 20140-5 Ed. 1.0 Automation systems and integration - Evaluating energy efficiency and other factors of manufacturing systems that influence the environment - Part 5: Environmental influence evaluation data. IEC 61784-3 Ed 3.0 Amd 1: Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions. IEC 62881 Ed. 1.0: Cause & Effect Table. IEC 61326-3-1 Ed. 2: Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications. IEC 61326-3-2 Ed. 2 Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment. IEC 62948 Ed 1.0 Industrial networks - Wireless communication network and communication profiles - WIA-FA. IEC/TC 66 Safety of measuring, control and laboratory equipment ATÉ 04 DE ABRIL DE 2016.
IEC 61010-2-030 Ed.2: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for equipment having testing or measuring circuits. IEC 61010-2-034 Ed.1: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength test. IEC 61010-1 Ed.3: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements. ATÉ 15 DE ABRIL DE 2016. IEC 61010-2-030 Ed.2: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for equipment having testing or measuring circuits. IEC/ TC 77 - Electromagnetic compatibility ATÉ 06 DE MAIO DE 2016. IEC 61000-4-39 - Electromagnetic Compatibility (EMC) - Part 4-39: Testing and measurement techniques - Radiated fields in close proximity - Immunity test. IEC/TC 78 - Live working ATÉ 04 DE ABRIL DE 2016. IEC 60900: Live Working - Hand tools for use up to 1 000 V a.c. and 1 500 V d.c. IEC 61482-2: Live working - Protective clothing against the thermal hazards of an electric arc - Part 2: Requirements. IEC 60895: Live working - Conductive clothing. IEC/TC 82 - Solar photovoltaic energy systems ATÉ 06 DE MAIO DE 2016. IEC 60904-1-1 Ed.1: Photovoltaic devices - Part 1-1: Measurement of current-voltage characteristics of multi-junction photovoltaic devices.
IEC 60904-8-1 Ed.1: Photovoltaic devices - Part 8-1: Measurement of spectral responsivity of multi-junction photovoltaic (PV) devices. IEC 62894 A1 Ed.1: Amendment 1 to IEC 62894 Ed.1: Photovoltaic inverters - Data sheet and name plate. IEC/TC 85 - Measuring equipment for electrical and electromagnetic quantities IEC 62974-1: Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements. IEC 62974-1: Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements. IEC 62586-2: Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements. IEC/TC 86 - Fibre optics IEC 60794-2-30/Ed3: Optical fibre cables - Part 2-30: Indoor optical fibre cables - Family specification for optical fibre ribbon cables for use in terminated cable assemblies. IEC 62150-5/Ed1: Fibre optic active components and devices - Test and measurement procedures - Part 5: Wavelength channel tuning time of tuneable transmitters IEC 61754-34/Ed1: Fibre optic interconnectiing devices and passive components - Fibre optic connector interfaces - Part 34: Type URM connector family. IEC 60794-2-30/Ed3: Optical fibre cables - Part 2-30: Indoor optical fibre cables - Family specification for optical fibre ribbon cables for use in terminated cable assemblies. IEC 62150-5/Ed1: Fibre optic active components and devices - Test and measurement procedures - Part 5: Wavelength channel tuning time of tuneable transmitters. IEC/TC 91 - Electronics assembly technology
IEC 60068-2-69 Ed.3: Environmental testing: Part 2-69: Tests - Test Te: Solderability testing of electronic components and boards by the wetting balance (force measurement) method. IEC/TC 100 - Audio, video and multimedia systems and equipment ATÉ 01 DE ABRIL DE 2016. IEC 62943/ED1 Visible light beacon system for multimedia applications. ATÉ 04 DE ABRIL DE 2016. IEC 62827-3 Ed. 1.0: Wireless Power Transfer - Management - Part 1: Multiple sources control management (TA15). ATÉ 08 DE ABRIL DE 2016. IEC 63002 Ed.1.0: Identification and communication interoperability method for external power supplies used with portable computing devices (TA 14). IEC 62943/ED1 Visible light beacon system for multimedia applications. IEC 61937-10 Ed.2: Digital audio -Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 10: Non-linear PCM bitstreams according to the MPEG-4 audio lossless coding (ALS) formats (TA 4). IEC/TC 105 - Fuel cell technologies IEC 62282-4-102 Ed.1: Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods. IEC/TC 116 - Safety of motor-operated electric tools IEC 62841-3-13/Ed1: Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-13: Particular requirements for transportable drills
IEC 62841-2-10 Ed. 1.0: Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-10: Particular requirements for hand-held mixers.