Hird is one of the UK s leading companies within the access platform and lifting industries. We offer a wide range of modern efficient equipment and services to meet with the individual requirements of each and every customer, small or large. Throughout this catalogue you will find solutions to all your access, lifting and moving demands. We have put together a fleet of machines and accessories in direct response to your feedback. Our full range of machines and services are also backed up by a team of highly experienced specialists. Along with Powered Access, Mini Cranes, Glass Handling Equipment, Hire and Sales, we also offer a number of bespoke services such as Contract Lifting, Machinery Moving, Service and Maintenance of Equipment and of course we can meet all your health and safety requirements through our training arm Hird Training. All of our equipment, services and teams of experts are available nationwide, through one of our strategically located regional depots covering the north, central and southern areas of the UK. Commitment to Quality: Hird will always adhere to any special request or requirements that you may have and will fully co-operate with any sensitive areas or issues that may be occurring within your company. Throughout this brochure you will see the Hird Training icon IPAF 3A - mobile vertical It is designed to recommend the specific courses that we feel are necessary to operate the relevant machine types safely and effectively. Email: info@hird.co.uk 35 Over 35 Years of Experience est. 1983 As ever, if you cannot find the training course that you require, or are unsure as to which courses suit your requirements, then please do not hesitate to call Hird Training on 01482 481965. 2

top: Vacuum Robots with zero manual handling requirements even in the tightest of spaces. top right: We are meeting a growing demand in modern building design that incorporates large glass panels and curved sheets. right: With 35 years of experience and a team of professional crane specialists Hird is one of the UK s leading independent crane hire companies. Grove Lift Vacuum Glass Lifters Page 6-35 MT2 6 MRT2 7 GB2 Curved 8 P11104 9 MRT4 10 DSL2 12 Oktopus GL-RN-F 400 13 PFHL89 Slimline Vacuum 14 MR611 15 DSZ2 Curved 400kg & 600kg 16 MRTA8 18 Kombi 7211-DS2 20 DSZ2 (750kg) 21 Oktopus GL-KN-F 600 22 Hydraulica 900 Curved 23 DSZ2 (750kg) 24 Oktopus GL-KN-1000 25 Hydraulica 1000 26 Hydraulica 1000.2 27 Hydraulica 1200 28 Hydraulica 1200.2 29 Hydraulica 1200.2 30 Hydraulica 1500 31 DSZ3 32 Adjustable Fin Lifter 33 Hydraulica 2000 34 Hydraulica 3500 35 Stone Lifters Page 36-37 SK200 stone vac lifter 36 SK1000 stone vac lifter 37 Vacuum Robots Page 38-35 Winlet 350 38 Winlet 350TH 38 Winlet 575 39 Winlet 600 39 Winlet 785 40 Winlet 1000 40 Glazing Robots Page 43-46 Glaslift Geko + MRT4 43 Glaslift Geko PV 43 Glaslift Geko PV+ 43 Glazing Manipulator 44 Oktopus Automated Counterbalance Lifter 46 Adjustable Mini Page 47 Floor Crane GML800+ Page 48 GML Overhead Page 49 Counterbalance Page 50-51 Floor Cranes Material Hoists Page 52 Glass Trolleys Page 56-57 Plate Glass Page 58-59 Trolleys Hand Cups Page 60-61 Transport Aids Page 62 Glass Carrying Straps Page 63 Lifting Slings Page 64 Secondary Page 65 Safety Device 3

Glass Vacuums We stock a large range of glass vacuum lifters vital pieces of equipment that are used in conjunction with mini cranes and spider cranes for glass installation. Our fleet of glass vacuum lifters includes units such as the versatile MT2, capable of lifting up to 135kg with its two suction pads, through to the Hydraulica 3500, a large vacuum lifter capable of lifting up to 3600kg in weight using 26 suction pads. Our glass vacuum lifters all come with dual-circuits as standard. Some units are remote controlled and several models are able to operate in different configurations. Before any piece of equipment leaves a Hird depot to go on hire, a rigorous test procedure is carried out to make sure we supply you with only the very best and safest machine. As with all of our equipment for hire, the full range of glass vacuum lifters is available across the UK from our regional depots. RTITB - accredited glass vacuum course Email: info@hird.co.uk UK Coverage Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658 4

Ask the Glass Handling Experts Glass Vacuums It is always worth spending a few minutes to remind yourself on the key points of safe glass lifting. The weight of load is the primary consideration when identifying your glass lifting machine. To calculate the glass weight: Length (m) x Height (m) x Thickness (mm) x 2.5 So if you had a piece of glass that was 2070mm x 3500mm and 6mm thick: Weight = 2.070 x 3.500 x 6 x 2.5 = 108.675kg For the double or triple glazed panels: Simply add the thickness of the panels, ignore the air space. You may however need to consider the weight of the surrounding frame. Wind conditions can have an impact when controlling glass panels with vacuum lifters, especially when suspended below the hook. We recommend that vacuum lifters can be safely used up to wind speeds of 18mph. Do not use the glass vacuum lifter in rainy conditions. Water can harm the machine s electrical and vacuum systems if ingested into the machine, increasing the risk of slipping or falling when the glass is in contact with the vacuum pads. We advise that vacuum lifters should only be used between temperatures of 0 and 40 degrees centigrade. You can measure wind speed with an anemometer or by using the Beaufort scale below: 0 Calm Air <3 kph Smoke rises straight up 1 Light Air 3 kph Smoke drifts 2 Light breeze 9 kph Wind is felt gently, leaves rustle 3 Gentle Breeze 15 kph Leaves and twigs move, flags flutter 4 Moderate Wind 25 kph Small branches move, paper blows on the street 5 Fresh Wind 35 kph Small trees sway 6 Strong Wind 45 kph Large branches move 7 Near Gale 56 kph Large trees sway 8 Gale 68 kph Difficult to walk 9 Severe Gale 81 kph Small branches break 10 Storm 98 kph Houses damaged, trees blown down 11 Severe Storm 110 kph Serious damage is done 12 Hurricane 118 kph Widespread damage Take a look at our website for the latest in safe lifting information from the team. If you have any concerns about load weights or working in bad weather conditions, then please call the Hird lifting team on 0203 174 0658. 5

MT2 (135kg) Fixed Dual Circuit Vacuum Lifter The Wood s Powr-Grip MT2 is an excellent compact vacuum lifter, providing an alternative to traditional hand cups, reducing manual handling for a wide range of applications. Powerful 135kg lifting capacity Safer lifting through improved manual handling Fewer people required to handle materials boosts productivity Suitable for wide range of materials including glass, coated boards, plastics, ceramics and sheet metal Vacuum gauge for each circuit with low vacuum alert Manual tilting from vertical to horizontal 135kg Tecñical Specifications Dimensions: HxWxD mm 770mm x 584mm x 244mm Vacuum system : dual circuit Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Number of suction cups: 2 Suction cup dimension: 280mm Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 135kg Weight of lifter: 24kg Structural depth: 254mm Output: 1.5m 3 /h Voltage: pump: 12v DC from rechargeable battery battery charger: 110v/240v 50/60Hz single phase factory selectable 664 816 305 413 254 584 RTITB - accredited glass vacuum course 6 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

MRT2 (135kg) Dual Circuit Vacuum Lifter Glass Vacuums Dual circuit vacuum lifter for safer manual handling and lifting with added rotation. 180 o degree powered rotation enables operator to manoeuvre loads safely Powerful 135kg lifting capacity Single person operation Can lift a wide range of materials such as glass, plastic and metals Safety alarms and interlocks as standard Manufactured by Woods Powr grip 135kg 180 o rotation Tecñical Specifications Dimensions: HxWxD mm 770mm x 584mm x 244mm Vacuum system : dual circuit Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Number of suction cups: 2 Suction cup dimension: 280mm Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 135kg Weight of lifter: 24kg Structural depth: 254mm Output: 1.5m 3 /h Voltage: pump: 12v DC from rechargeable battery battery charger: 110v/240v 50/60Hz single phase factory selectable 434 123 76 944 944 1311 747 279 366 RTITB - accredited glass vacuum course Email: info@hird.co.uk 7

GB2 Curved (300kg) Dual Circuit Vacuum Lifter Dual circuit vacuum lifter for safer manual handling of curved glass with a minimum curve radius 1000mm. 360 o rotation with locking facility every 90 o Powerful 300kg lifting capacity Single person operation Can lift a wide range of materials such as glass, plastic and metals Safety alarms and interlocks as standard Manufactured by VIAVAC 300kg 360 o rotation 90 o tilt Tecñical Specifications Dimensions: HxWxD mm 1177mm x 610mm x 300mm Vacuum system : dual circuit Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Number of suction cups: 8 Suction cup dimension: 1100 x 600mm Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 300kg Weight of lifter: 75kg Structural depth: 300mm Output: 1.5m3/h Voltage: pump: 12v DC from rechargeable battery battery charger: 110v/240v 50/60Hz single phase factory selectable 300 649 610 1055 RTITB - accredited glass vacuum course 8 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

P11104 (320kg) Dual Circuit Vacuum Lifter Glass Vacuums The Wood s Powr-Grip P11104 4-in-line is one of Hird s most popular lifters. Providing an impressive 320kg lifting capacity, it s a great choice when moving sheets of glass, metal, plastic or coated boards. Dual circuit vacuum system for powerful lifting 4 x 305mm suction cups for secure fitting to material Manual tilting horizontal to vertical Low vacuum alert 320kg 180 o rotation Tecñical Specifications Dimensions: HxWxD mm 1588mm x 1378mm x 233mm Vacuum system : dual circuit 1 pump, 2 vacuum tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Number of suction cups: 4 Suction cup dimension: 305mm Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 320kg Weight of lifter: 34kg Structural depth: 233mm Output: 1.5m 3 /h Voltage: pump: 12v DC from rechargeable battery battery charger: 110v/240v 50/60Hz single phase factory selectable 900 933 Special adaption short hook 1290 1555 1588 305 1290 330 190 Structural Depth 305 233 1378 RTITB - accredited glass vacuum course Email: info@hird.co.uk 9

MRT4 (320kg) Dual Circuit Vacuum Lifter The Woods Powr-Grip MRT4 is another of Hird s popular vacuum lifters. Offering multiple configurations and a short-arm option, the MRT4 is a great choice for most load sizes. Powerful 320kg lifting capacity Variable length extension arms for different materials Low vacuum alert compact 320kg 360 o rotation Tecñical Specifications Dimensions: HxWxD mm 1531mm x 1691mm x 292mm Vacuum system : dual circuit 1 pump, 2 vacuum tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Number of suction cups: 4 Suction cup dimension: 305mm Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 320kg Weight of lifter: 58kg Structural depth: 292mm Output: 1.5m 3 /h Voltage: pump: 12v DC from rechargeable battery battery charger: 110v/240v 50/60Hz single phase factory selectable Standard accessories: 4 x extension arms 712 1230 1531 1290 1990 1691 292 390 930 RTITB - accredited glass vacuum course 840 10 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Equipment Hire from Hird Hird s comprehensive range of equipment Cranes, Powered Access and Glass lifting equipment, all delivered to your worksite Glass Vacuums Email: info@hird.co.uk 11

DSL2 (400kg) Dual Circuit Curved Vacuum Lifter Hird s DSL2 is a fully adaptable 16 pad vacuum lifter for convex and concave panels. Suitable for panels with a minimum radius of 1000mm. Pads rotate to fix securely to the surface of the materials Great for convex and concave glass as well as other curved panels Suitable for panels with a minimum radius of 1000mm Low vacuum alert 400kg 270 o rotation Tecñical Specifications Dimensions: HxWxD mm 1300mm x 2100mm x 300mm Vacuum system : dual circuit 4 pumps, 2 vacuum tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Number of suction cups: 16 Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 400kg Suction cup dimension: 220mm Weight of lifter: 100kg Structural depth: 300mm Output: 1.5m 3 /h Voltage: pump: 12v DC from 2 rechargeable batteries battery charger: 110v/240v 50/60Hz single phase factory selectable Accessories: cable remote control, wheeled stand 600 min / 960 max 1330 850 2010 300 RTITB - accredited glass vacuum course 12 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Oktopus GL-RN-F 400 (400kg) Dual Circuit Slimline Vacuum Lifter Approved Distributor Glass Vacuums The Wirth Oktopus GL-RN-F 400 is new to the hire fleet. A ground-breaking compact vacuum lifter with 400kg capacity, it features a guide ring for glazing in between scaffolding. Dual, independent vacuum circuits with two vacuum reserve tanks and two non-return valves Vacuum gauge for each circuit Audio-visual low vacuum alert On-board maintenance-free vacuum pump 12v rechargeable battery with integral 110v or 240v charger and battery energy gauge Extension arms included for lifting larger sized loads GL-RN-F 400 with guide ring fitted 400kg 360 o rotation 90 o tilt Tecñical Specifications Dimensions: HxWxD mm 1050mm x 1050mm x 140mm guide ring (220mm) Vacuum system : dual circuit 2 pumps, 2 vacuum tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Number of suction cups: 4 4 Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 300kg (when using guide ring) 400kg Suction cup dimension: 400mm Weight of lifter: 55-70kg Structural depth: 140mm (when using guide ring) - 220mm Output: 1.5m 3 /h Voltage: pump: 12v DC from 2 rechargeable batteries battery charger: 240v 50/60Hz single phase factory selectable Accessories: External battery pack and charger for radio control 860 1890 1450 1050 140 220 RTITB - accredited glass vacuum course Email: info@hird.co.uk 13

PFHL89 Slimline Vacuum (445kg) Vacuum Lifter An excellent mid-range slimline lifter from Hird. Being lightweight and only 188mm deep it is ideal for fitting material in narrow work areas. 180 o rotation, 90 o tilt On board battery and charger Battery energy gauge Vacuum gauge Vacuum line filter Low vacuum warning light 445kg 180 o rotation Tecñical Specifications Dimensions: HxWxD mm 1443mm x 1502mm x 188mm Vacuum system : dual circuit 4 pumps, 2 vacuum tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Suction cup dimension: 230mm Number of suction cups: 8 Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 455kg Weight of lifter: 54kg Structural depth: 188mm Output: 1.5m 3 /h Voltage: pump: 12v DC from 2 rechargeable batteries battery charger: 110v/240v 50/60Hz single phase factory selectable Accessories: Dual vacuum system (EO10DVS), Vacuum loss warning buzzer (EO3VLW) Individual pad shutoffs (CM1COWB), 10 lipped vacuum pads 994 1443 1502 188 RTITB - accredited glass vacuum course 14 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

MR611 (500kg) Dual Circuit Vacuum Lifter Glass Vacuums The Woods Powr-Grip MR611 updated now to include a tilt function along with 180 o rotation, this is an excellent addition to Hird s hire fleet, perfect for longer panel sizes. Two pads are removable (capacity 333kg) for shorter glass lengths Manual tilting horizontal to vertical Low vacuum alert 500kg 270 o rotation Tecñical Specifications Dimensions: HxWxD mm 1498mm (2134mm with extension arms) x 305mm x 193mm Vacuum system : dual circuit 4 pumps, 2 vacuum tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Number of suction cups: 6 4 Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 500kg 333kg Suction cup dimension: 305mm Weight of lifter: 71kg Structural depth: 193mm Output: 1.5m 3 /h Voltage: pump: 12v DC from 2 rechargeable batteries battery charger: 110v/240v 50/60Hz single phase factory selectable Accessories: radio remote control, 90 tilting option 1080 1080 1370 2000 1780-4 Pad 2120-6 Pad 1150 305 165 RTITB - accredited glass vacuum course Email: info@hird.co.uk 15

DSZ2 Curved 400Kg (16 Pad) & 600kg (24 Pad) Dual Circuit Vacuum Lifter The DSZ2 Curved Vacuum Lifter range from Hird offers a 400Kg or 600Kg capacity. Fully adjustable, the vacuum lifter swivel arms allow the vacuum pads on the lifting frame to be moulded to the contours of the load ensuring maximum contact is made, enabling the load to be fully supported throughout the lift. Easily configuring between concave & convex loads, the DSZ2 curved also offers hydraulically assisted tilt making using the vacuum lifter easier to operate. Ideal for lifting and handling curved glass panels Very powerful dual, independent vacuum circuits Lift capacity of up to 600kg Low vacuum alert Cabled remote control 400kg to 600kg 360 o continuous rotation Tecñical Specifications Dimensions: HxWxD mm Concave 1000mm x 2000mm (2800mm with extension) x 300mm Convex 1600Max (600min) x 2000 (2800mm with extension) x 300mm Vacuum system : 2 or 4 pumps, 2 vacuum reserve tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Number of suction cups: 24 16 Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 600kg 400kg Weight of lifter: 190kg 175kg Suction cup dimension: 220mm Structural depth: 300mm Output: 1.5m 3 /h Voltage: pump: 12v DC from 2 rechargeable batteries battery charger: 110v/240v 50/60Hz single phase factory selectable Accessories: cable remote control, radio remote control RTITB - accredited glass vacuum course 16 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Concave Glass Vacuums 600 min 1600max 900 1000 900 2800 600 min 1600max 900 1000 900 2000 Convex 2000 2800 Email: info@hird.co.uk 17

MRTA8 (635kg) Dual Circuit Quadra-Tilt Vacuum Lifter The new Woods Powr-Grip MRTA8 is a welcome upgrade to the very popular MRTA6 with increased lifting capacity and four-bar tilt mechanism, an excellent mid-range vacuum. Powerful 635kg capacity from eight 305mm suction cups Four bar tilt mechanism Multiple configurations for different load sizes Low vacuum alert 500kg 360 o rotation Tecñical Specifications Dimensions: HxWxD mm max 1490mm x2600mm x 290mm min 830mm x 1190mm x 290mm Vacuum system : dual circuit 1 pump, 2 vacuum tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Number of suction cups: 8 Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 635kg Suction cup dimension: 305mm Weight of lifter: 91kg Structural depth: 290mm Output: 1.5m3/h Voltage: pump: 12v DC from rechargeable battery battery charger: 110v/240v 50/60Hz single phase factory selectable Accessories: 4 x extension arms and 4 pads 810 830 1490 1620 875 900 1490 1190 2340 290 RTITB - accredited glass vacuum course 18 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Glass Vacuums Suction Pad Configuration Max Weight 320kg Max Weight 320kg 830 1170 1190 2520 Max Weight 320kg Max Weight 635kg 1170 1160 875 2660 1770 2210 Max Weight 635kg Max Weight 635kg 830 1490 1210 875 1190 2340 2660 Email: info@hird.co.uk 19

Kombi 7211-DS2 (600kg) Dual Circuit Vacuum Lifter Hird s Kombi is a very popular choice with contractors. With its robust design and lockable tilt, the Kombi is a tough mid-range vacuum. Lockable tilting options from vertical to horizontal at 15 intervals Powerful dual independent vacuum circuits Low vacuum alert extension arms 600kg 360 o continuous rotation Tecñical Specifications Dimensions: HxWxD mm 1300mm x 1300mm (2840mm with extension) x 255mm Vacuum system : dual circuit 1 pump, 2 vacuum tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Number of suction cups: 12 (14 with extension arms) Suction cup dimension: 300mm Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 600kg Weight of lifter: 112kg Structural depth: 255mm Output: 1.5m 3 /h Voltage: pump: 12v DC from rechargeable battery battery charger: 110v/240v 50/60Hz single phase factory selectable Accessories: 2 x extension arms with moveable pads 255 1330 1000 830 1300 2840 RTITB - accredited glass vacuum course 20 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

DSZ2 (750kg) Dual Circuit Slimline Vacuum Lifter Glass Vacuums Hird s DSZ2 is the UK s slimmest vacuum lifter currently available today. Capable of lifting 750kg (with extension arms fitted), it is a strong performer. Narrow depth of just 180mm for tight working environments Impressive 750kg lifting capacity (10 suction cups) Wheeled stand Low vacuum alert Cabled remote control (2016 model onwards) Hydraulically assisted tilt as standard 4 x extension arms with pads Wheeled stand 750kg 360 o continuous rotation Tecñical Specifications Dimensions: HxWxD mm 1240mm x 1300mm (2180mm with extension) x 180mm Vacuum system : dual circuit 2 pumps, 2 vacuum tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Number of suction cups: 10 6 Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 750kg 450kg Suction cup dimension: 330mm Weight of lifter: 150kg Structural depth: 180mm Output: 1.5m 3 /h Voltage: pump: 12v DC from 2 rechargeable batteries battery charger: 110v/240v 50/60Hz single phase factory selectable Accessories: 4 x extension arms with pads, wheeled stand 780 1320 1250 1510 860 1300 RTITB - accredited glass vacuum course 2180 180 Email: info@hird.co.uk 21

Oktopus GL-RN-F 600 / 800 (800kg) Dual Circuit Vacuum Lifter Approved Distributor The Wirth Oktopus GL-RN-F 600 / 800 has a short lift arm and extension arms which increases capacity up to 800kg. A large capacity makes this suitable for substantial glass or material panels. Dual independent vacuum circuits with two vacuum reserve tanks and two non-return valves Vacuum gauge for each circuit Audio-visual low vacuum alert On-board maintenance-free vacuum pump 12v rechargeable battery with integral 110v or 240v charger and battery energy gauge Extension arms included for lifting larger sized elements Cabled remote control 600kg to 800kg 360 o rotation 90 o tilt Tecñical Specifications Dimensions: HxWxD mm 1050mm (1890mm with ext) x 1050mm (1890mm with ext) x 140mm Vacuum system : dual circuit 2 pumps, 2 vacuum tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Number of suction cups: 8 6 Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 800kg 600kg Suction cup dimension: 400mm Weight of lifter: 55-70kg Structural depth: 220mm Output: 1.5m 3 /h Voltage: pump: 12v DC from 2 rechargeable batteries battery charger: 240v 50/60Hz single phase factory selectable Accessories: External battery pack and charger for radio control 1450 1890 220 RTITB - accredited glass vacuum course 22 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Hydraulica 900 Curved (900kg) Dual Circuit Vacuum Lifter Glass Vacuums A heavy duty 900kg curved vacuum lifter using the reliable Hydraulica chassis and modified for heavy curved glass units. Powered 90 o hydraulic tilt 270 Manual and lockable rotation Low vacuum alert Two or four on-board maintenance free vacuum pumps Cable remote control as standard 90 o tilt 900kg 360 o continuous rotation Tecñical Specifications Dimensions: HxWxD mm 1230mm x 1350mm (2900mm with extension) x 300mm Vacuum system : dual circuit 4 pumps, 2 vacuum tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Suction cup dimension: 330mm Number of suction cups: 14 10 Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 1000kg 750kg Weight of lifter: 150kg 120kg Structural depth: 300mm 300mm Output: 1.5m 3 /h Voltage: pump: 12v DC from 2 rechargeable batteries battery charger: 110v/240v 50/60Hz single phase factory selectable Accessories: 2 x extension arms with pads, cable remote control, wheeled stand 850 875 min 1480 max 975 3600 300 RTITB - accredited glass vacuum course Email: info@hird.co.uk 23

DSZ2 (900kg) Dual Circuit Slimline Vacuum Lifter Hird s DSZ2 is the UK s slimmest vacuum lifter currently available today. Now with two additional ext arms to lift an impressive 900kg. Narrow depth of just 180mm for tight working environments Impressive 900kg lifting capacity (12 suction cups) Wheeled stand Low vacuum alert Hydraulically assisted tilt as standard Cabled remote control (2016 model onwards) Wheeled stand 900kg 360 o continuous rotation Tecñical Specifications Dimensions: HxWxD mm 1240mm x 1300mm (2780mm with extension) x 180mm Vacuum system : dual circuit 2 pumps, 2 vacuum tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Number of suction cups: 12 10 6 Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 900kg 750kg 450kg Suction cup dimension: 330mm Weight of lifter: 150kg Structural depth: 180mm Output: 1.5m 3 /h Voltage: pump: 12v DC from 2 rechargeable batteries battery charger: 110v/240v 50/60Hz single phase factory selectable Accessories: 6 x extension arms with pads, wheeled stand 780 1320 1250 1510 860 1300 2780 180 RTITB - accredited glass vacuum course 24 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Oktopus GL-KN-1000 (1000kg) Dual Circuit Vacuum Lifter Approved Distributor Glass Vacuums The Oktopus GL-KN-1000 is a compact, lightweight heavy duty vacuum lifter from leading manufacturer Wirth. Now with a remote control vacuum system offering greater flexibility to the operator. Dual independent vacuum circuits with two vacuum reserve tanks and two non-return valves Vacuum gauge for each circuit Audio-visual low vacuum alert On-board maintenance-free vacuum pump 12v rechargeable battery with integral 110v or 240v charger and battery energy gauge Extension arms included for lifting larger sized elements 1000kg 360 o rotation 90 o tilt Tecñical Specifications Dimensions: HxWxD mm 1400 (2300mm with ext) x 1050mm (1470mm with ext) x 250mm Vacuum system : dual circuit 2 pumps, 2 vacuum tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Number of suction cups: 6 10 (with extension arms) Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 1000kg Suction cup dimension: 400mm Weight of lifter: 120kg Structural depth: 250mm Output: 1.5m 3 /h Voltage: pump: 12v DC from 2 rechargeable batteries battery charger: 240v 50/60Hz single phase factory selectable Accessories: Remote Control Vacuum 1050 1470 250 1400 2300 RTITB - accredited glass vacuum course Email: info@hird.co.uk 25

Hydraulica 1000 (1000kg) Dual Circuit Vacuum Lifter The Kappel Hydraulica 1000 features an impressive lifting capacity (up to 1000kg) and includes a remote control power tilter for larger loads. Extension arms and ten pad panel provide flexible lifting Powered tilting improves material handling Wheeled stand Low vacuum alert Cabled remote control 1000kg 360 o continuous rotation Tecñical Specifications Dimensions: HxWxD mm 1230mm x 1350mm (2900mm with extension) x 300mm Vacuum system : dual circuit 4 pumps, 2 vacuum tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Suction cup dimension: 330mm Number of suction cups: 14 10 Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 1000kg 750kg Weight of lifter: 150kg 120kg Structural depth: 300mm 300mm Output: 1.5m 3 /h Voltage: pump: 12v DC from 2 rechargeable batteries battery charger: 110v/240v 50/60Hz single phase factory selectable Accessories: 2 x extension arms with pads, cable remote control, wheeled stand 1000 1000 1350 850 1230 2900 300 RTITB - accredited glass vacuum course 26 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Hydraulica 1000.2 (1000kg) Dual Circuit Vacuum Lifter Glass Vacuums The Kappel Hydraulica 1000 features an impressive lifting capacity (up to 1000kg) and includes a remote control rotation and tilter for larger loads. Extension arms and ten pad panel provide flexible lifting Powered tilting and rotation improves material handling Wheeled stand Low vacuum alert Cabled remote control Remote control tilt and rotation 1000kg 360 o continuous rotation Tecñical Specifications Dimensions: HxWxD mm 1230mm x 1350mm (2900mm with extension) x 300mm Vacuum system : dual circuit 4 pumps, 2 vacuum tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Suction cup dimension: 330mm Number of suction cups: 14 10 Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 1000kg 750kg Weight of lifter: 150kg 120kg Structural depth: 300mm 300mm Output: 1.5m 3 /h Voltage: pump: 12v DC from 2 rechargeable batteries battery charger: 110v/240v 50/60Hz single phase factory selectable Accessories: 2 x extension arms with pads, cable remote control, wheeled stand 1200 1450 950 850 1230 1230 2900 300 1200 RTITB - accredited glass vacuum course Email: info@hird.co.uk 27

Hydraulica 1200 (1200kg) Dual Circuit Vacuum Lifter The Hydraulica 1200 is a powerful vacuum lifter in the Hird fleet designed to lift large, heavy and even irregular loads of up to 1200kg. Irregular loads can be lifted with the assistance of individual suction pad shut off Very powerful dual independent vacuum circuits Powered tilting improves material handling Wheeled stand Low vacuum alert Cabled remote control 1200kg 270 o rotation Tecñical Specifications Dimensions: HxWxD mm 875mm (1480 max) x 3600mm x 300mm Vacuum system : dual circuit 2 or 4 pumps, 2 vacuum tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Suction cup dimension: 220mm Number of suction cups: 16 Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 900kg Weight of lifter: 175kg Structural depth: 300mm Output: 1.5m 3 /h Voltage: pump: 12v DC from 2 rechargeable batteries battery charger: 110v/240v 50/60Hz single phase factory selectable Accessories: radio remote cotnrol, wheeled trolley 980 1560 1000 1000 1480 2000 3750 300 RTITB - accredited glass vacuum course 28 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Hydraulica 1200.2 (1200kg) Dual Circuit Vacuum Lifter Glass Vacuums The Hydraulica 1200 is a powerful vacuum lifter in the Hird fleet designed to lift large, heavy and even irregular loads of up to 1200kg. Irregular loads can be lifted with the assistance of individual suction pad shut off Very powerful dual independent vacuum circuits Powered tilting and rotation improves material handling Wheeled stand Low vacuum alert Cabled remote control Remote control tilt and rotation 1200kg 270 o rotation Tecñical Specifications Dimensions: HxWxD mm 1230mm x 1350mm (2900mm with extension) x 300mm Vacuum system : dual circuit 4 pumps, 2 vacuum tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Suction cup dimension: 330mm Number of suction cups: 14 10 Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 1000kg 750kg Weight of lifter: 150kg 120kg Structural depth: 300mm 300mm Output: 1.5m 3 /h Voltage: pump: 12v DC from 2 rechargeable batteries battery charger: 110v/240v 50/60Hz single phase factory selectable Accessories: 2 x extension arms with pads, cable remote control, wheeled stand 1200 1450 950 850 1230 1230 2900 300 1200 RTITB - accredited glass vacuum course Email: info@hird.co.uk 29

Hydraulica 1200 Curved (1200kg) Dual Circuit Vacuum Lifter A heavyweight curved vacuum lifter from Hird. Comes with remote controlled tilt and rotation to make lifting safer and easier. Irregular loads can be lifted with the assistance of individual suction pad shut off Remote control tilt and rotation Very powerful dual independent vacuum circuits Powered tilting and rotation improves material handling Wheeled stand Low vacuum alert Cabled remote control 1200kg 270 o rotation Tecñical Specifications Dimensions: HxWxD mm 2800mm x 1100mm (1600mm) x 400mm Vacuum system : dual circuit 2 or 4 pumps, 2 vacuum tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Suction cup dimension: 220mm Number of suction cups: 48 Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 900kg Weight of lifter: 250kg Structural depth: 400mm Output: 1.5m 3 /h Voltage: pump: 12v DC from 2 rechargeable batteries battery charger: 110v/240v 50/60Hz single phase factory selectable Accessories: radio remote cotnrol, wheeled trolley 160 min 1600 max 950 2800 400 RTITB - accredited glass vacuum course 30 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Hydraulica 1500 (1500kg) Dual Circuit Vacuum Lifter Glass Vacuums The latest heavy duty vacuum in our Hydraulica series. An update on the Hydraulica 1200 model which increases capacity up to 1500kg. Irregular loads can be lifted with the assistance of individual suction pad shut off Remote control tilt and rotation Very powerful dual independent vacuum circuits Powered tilting and rotation improves material handling Wheeled stand Low vacuum alert 1500kg 270 o rotation 90 o tilt Tecñical Specifications Dimensions: HxWxD mm 875mm (1480 max) x 3600mm x 300mm Vacuum system : dual circuit 2 or 4 pumps, 2 vacuum tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Suction cup dimension: 3300mm Number of suction cups: 20 16 12 8 Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 1500kg 1200kg 900kg 600kg Weight of lifter: 250kg 220kg 156kg 148kg Structural depth: 300mm Output: 1.5m 3 /h Voltage: pump: 12v DC from 2 rechargeable batteries battery charger: 110v/240v 50/60Hz single phase factory selectable Accessories: radio remote cotnrol, wheeled trolley 980 1560 1000 1000 1480 2000 3750 300 RTITB - accredited glass vacuum course Email: info@hird.co.uk 31

DSZ3 (1500kg) Dual Circuit Vacuum Lifter The DSZ3 Slimline 1500kg is a modern innovative increased capacity version of the already popular DSZ2. Its compact design will make it a class leading heavy duty vacuum lifter. Manual 360 o lockable rotation (continuous) Hydraulically assisted tilting from vertical to horizontal Dual independent vacuum circuits with two vacuum reserve tanks and two non-return valves Vacuum gauge for each circuit Audio-visual low vacuum alert On-board maintenance-free vacuum pump 12v rechargeable battery with integral 110v or 240v charger and battery energy gauge Extension arms included as standard Wheeled stand 1500kg 360 o rotation 90 o tilt Tecñical Specifications Dimensions: HxWxD mm 1100mm (1850mm with extension) x 1500mm (2300mm with extension) x 220mm Vacuum system : dual circuit 2 pumps, 2 vacuum tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Number of suction cups: 12 6 Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 1500kg 1200kg Suction cup dimension: 6x 330mm - 6x 520mm Weight of lifter: 250kg Structural depth: 220mm Output: 1.5m 3 /h Voltage: pump: 12v DC from 2 rechargeable batteries battery charger: 110v/240v 50/60Hz single phase factory selectable Accessories: 6 x extension arms with pads, wheeled stand 2050 1065 1572 1065 2631 2876 RTITB - accredited glass vacuum course 32 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Adjustable Fin Lifter (1800kg) Dual Circuit Vacuum Lifter Glass Vacuums Exclusively manufactured for and designed by Hird, the adjustable fin lifter starts as an 1320kg 8 in line vacuum lifter. With the extension arms the fin lifter can be extended up to an impressive 9m in length with an 1800kg capacity. Manual 210 o lockable rotation Remote tilting from vertical to horizontal Dual independent vacuum circuits with four vacuum reserve tanks and four non-return valves Vacuum gauge for each circuit Audio-visual low vacuum alert On-board maintenance-free vacuum pump 12v rechargeable battery with integral 110v or 240v charger and battery energy gauge Wheeled stand Cabled remote control 1800kg 210 o rotation 90 o tilt Tecñical Specifications Dimensions: HxWxD mm 1100mm x 3000mm (9000mm with extensions) x 292mm Vacuum system : dual circuit 4 pumps, 4 vacuum tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Number of suction cups: 24 16 8 Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 1800kg 1720kg 1320kg Suction cup dimension: 330mm 300mm 300mm Weight of lifter: 750kg with extension arms fitted Structural depth: 292mm Output: 1.5m 3 /h Voltage: pump: 12v DC from 2 rechargeable batteries battery charger: 110v/240v 50/60Hz single phase factory selectable Accessories: 4 x extension arms with pads, wheeled stand 3000 1500 1500 1500 1500 70 6000 9000 510 292 RTITB - accredited glass vacuum course Email: info@hird.co.uk 33

Hydraulica 2000 (2000kg) Dual Circuit Vacuum Lifter The high capacity Hydraulica 2000 is one of the most powerful vacuum lifters available in the UK today. Updated with a new frame design with 8 removable extensions arms, it makes it easy to reconfigure to accommodate different load shapes. With a cable remote offering the user powered 210 o rotation & 90 o tilt for precision installation. Extension arms and ten pad panel provide flexible lifting Powered tilting improves material handling Wheeled stand Low vacuum alert Cabled Remote Control 2000kg 210 o rotation Tecñical Specifications Dimensions: HxWxD mm 1870mm x 2600mm (5000mm with extension) x 380mm Vacuum system : 4 to 6 pumps, 2 vacuum tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Suction cup dimension: 330mm Number of suction cups: 26 14 Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 2000kg 1050kg Weight of lifter: 750kg 500kg Structural depth: 380mm 380mm Output: 1.5m 3 /h Voltage: pump: 12v DC from rechargeable battery battery charger: 110v/240v 50/60Hz single phase factory selectable Accessories: cable remote control, wheeled stand, 2 x extension arms with pads (increasing capacity from 1050kg to 2000kg) 1260 1870 1200 745 2020 1065 2600 330 5000 RTITB - accredited glass vacuum course 380 34 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Modern building construction tests tecñology to its limits. Hird design the very latest glass lifting equipment in conjunction with manufacturers. Email: info@hird.co.uk 35

Hydraulica 2000 (2000kg) (2017) Dual Circuit Vacuum Lifter The Kappel Hydraulica 2000 has been updated with a new compact frame and the very latest vacuum tecñology, making this a very versatile heavyweight lifter. Powered 360 degree rotation and powered tilt (from vertical to horizontal) are now standard providing a great productivity boosting combination of huge lifting power, lift control and safety tecñology. Lifting capacity of 2000kg Powerful dual, independent vacuum circuits Powered tiliting up to 90 Powered rotation - 210 Wheeled stand for transport across site or overnight storage Low vacuum audio visual safety alerts 2000kg 360 o rotation 90 o tilt Tecñical Specifications Dimensions: HxWxD mm 1450mm x 2600mm (3200mm with extension) x 350mm Vacuum system : 4 to 6 pumps, 2 vacuum tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Suction cup dimension: 520mm & 330mm Number of suction cups: 22 14 Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 2000kg 1550kg Weight of lifter: 432kg 384kg Structural depth: 350mm 350mm Output: 1.5m 3 /h Voltage: pump: 12v DC from rechargeable battery battery charger: 110v/240v 50/60Hz single phase factory selectable Accessories: cable remote control, wheeled stand, 2 x extension arms with pads (increasing capacity from 1050kg to 2000kg) 1150mm Min 1450mm Max 1795 3200mm Max 2600mm Min 2124mm 350mm RTITB - accredited glass vacuum course 36 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Hydraulica 3500 (3500kg) Dual Circuit Vacuum Lifter Glass Vacuums With 3500kgs lifting capacity, this machine enables lifting of large items of glass safer and easier. With the compact design and class leading ability it is affectionately known as Brutus. Powered 90 o hydraulic tilt 210 o lockable rotation Irregular loads can be lifted with the assistance of individual suction pad shut off Very powerful dual independent vacuum circuits Powered tilting improves material handling Low vacuum alert Sliding extension arms Cabled Remote Control 3500kg 210 o rotation 90 o tilt Tecñical Specifications Dimensions: HxWxD mm 1840mm x 3156mm (4956mm with extension) x 385mm Vacuum system : dual circuit 4 pumps, 4 vacuum tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Suction cup dimension: 520mm Number of suction cups: 12 Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 3500kg Weight of lifter: 750kg Structural depth: 385mm Output: 1.5m3/h Voltage: pump: 12v DC from 2 rechargeable batteries battery charger: 110v/240v 50/60Hz single phase factory selectable Accessories: cable remote control, wheeled stand, 1610 1840 1780 1380 1030 2073 4956 385 3156 RTITB - accredited glass vacuum course Email: info@hird.co.uk 37

Stone Lifters SK200 (300kg) Side and Top Lifter Stone Vac Let Hird s Stone Vac SK200 do the hard work when lifting stone materials or construction panels such as drywall or plasterboard. Powerful lifting from a footprint of just 300mm x 500mm Horizontal lifting capacity of 300kg, 200kg for vertical Suitable for polished stone materials Low vacuum alert 300kg Tecñical Specifications Dimensions: HxWxD mm 250mm x 492mm x 260mm Vacuum system : single circuit Number of suction pads: 1 Suction cup dimension: 280mm Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 300kg for top lifting 200kg for side lifting Weight of lifter: 32kg Structural depth: 260mm Output: 1.5m 3 /h Voltage: pump: 12v DC from rechargeable battery battery charger: 240v RTITB - accredited vacuum course 38 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Stone Lifters SK1000 (1000kg) Side and Top Lifter Stone Vac Hird s powerful Stone Vac SK1000 for lifting stone, kerbs, paving, blocks, bricks, slabs and pipes up to 1000kg. Side lift arm aids lifting Range of spreader beams available Low vacuum and overload alerts Suitable for polished stone materials 1000kg Tecñical Specifications Dimensions: HxWxD mm 619mm x 590mm x 107mm Vacuum system : single circuit Number of suction pads: 1 Suction pad dimension: 450mm x 900mm Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 1000kg for top lifting Weight of lifter: 44kg Structural depth: 107mm Output: 1.5m 3 /h Voltage: pump: 12v DC from rechargeable battery battery charger: 240v SK1000 in sidelift mode SK1000 with 1ton suction pad RTITB - accredited glass vacuum course Email: info@hird.co.uk 39

In addition to our range of glass vacuum lifting equipment, we can offer our glazing customers throughout the UK a fleet of vacuum robots from leading manufacturer Winlet. UK and Ireland Distributor Vacuum Robots course Winlet Vacuum Robots Dual Circuit Window & Glass Installation Robots Winlet Vacuum Robots All machines in the Winlet series can fit through a standard doorway and are battery powered, making them ideal for interior use. The Hird range of vacuum robots has lifting capacities from 175kg up to 1000kg. Used in conjunction with other pieces of glass handling equipment, vacuum robots have been designed to comply with manual handling regulations specifically related to handling composite and unitised windows. Winlet 350 Winlet 350 TH - Telehandler / Fork Lift Robot 350kg The Winlet 350 robot revolutionises the installation of glass, with capacities of up to 350kg and overhead installation all within a compact design for work in confined areas. 350kg The Winlet 350TH is designed to fit on most telehandlers providing an excellent solution where height or ground conditions prevent the use of a standard Winlet or Mini Crane. 3m 2 1 Winlet 350 Winlet 350 Tecñical Specifications Winlet 350TH 1450 300 350kg Max capacity 350kg 200kg Max capacity on side 200kg 390kg Total weight excl. counterweights 400kg 495kg Total weight incl. counterweights N/A 690mm External width 820mm 290 290 1175mm 1175mm 690mm 920mm (twin wheels) 920mm External width with twin wheels N/A 1450mm External length 1410mm Pick and Place Reach 1270mm External height 1150mm 3m 290/790mm Min/max extension (front bumper to suction cup) 290/790mm 2800mm Max lifting height (to centre of lifting yoke) 2700mm 2 100mm Hydraulic side offset 100mm 250kg 350kg 500mm 200kg 300kg Fine lift on arm 500mm 1 140 Tilt function 180 360 Hydraulic rotation 360 4 x Ø 270mm Suction cups 4 x Ø 270mm 200kg 1 0 1 0 2 x 75 AH Battery 2 x 95 AH 1270 3m 2 1 Winlet 350TH 250kg 350kg 200kg 300kg 1 0 1410mm 1140mm Pick and Place 3m 2 1 1150mm Reach 200kg 820mm 1 0 40 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Vacuum Robots Designed in conjunction with experienced operators to make your lifting safe simple and productive. Winlet 575 Winlet 600 1580mm 360mm 1550mm MAX 300kg 575kg The Winlet 575 model combines superior lifting capacity and reach without compromising its compact design. With a 575kg capacity the unit replaces the need for traditional lifting methods. 520mm 1315mm 875mm 600kg The Winlet 600 model combines superior lifting capacity and reach without compromising its compact design. Operators will be able to work more efficiently, resulting in fewer injuries and safer installation. 4m 3 2 1 Winlet 575 325kg 450kg 2 1 0 1800mm 700 1370mm 275 Pick and Place 1600mm Reach 890mm 1250mm (twin wheels) 4m 3 200kg 325kg 450kg 2 550kg 1 2 1 0 Winlet 575 Tecñical Specifications Winlet 600 Winlet 600 575kg Max capacity 600kg 275kg Max capacity on side 300kg 1025kg Total weight excl. counterweights 865kg 1300kg Total weight incl. counterweights 1060kg 890mm External width 875mm 1250mm External width with twin wheels 1250mm 520mm 1880mm External length 1315mm 1600mm External height 1550mm Pick and Place 700/1800mm Min/max extension (front bumper to suction cup) 600/1300mm 3600mm Max lifting height (to centre of lifting yoke) 800mm 100mm Hydraulic side offset 90mm 200mm Fine lift on arm 90mm 180 Tilt function 160 180 Hydraulic rotation 360 4 x Ø 350mm Suction cups 4 x Ø 385mm 600kg 550kg 2 x 150 AH Battery 2 x 95 AH 300kg 1580mm 1315mm Reach 4m 3 2 1 1550mm 300kg 875mm 1250mm (twin wheels) 425kg 600kg 2 1 0 360mm MAX 300kg Email: info@hird.co.uk 41

BIGGER, BETTER, STRONGER Winlet 785 Winlet 1000 785kg 1000kg The Winlet 785 Glazing Robot provides a revolutionary and highly productive new working method of installing windows. Glazing or glass panels weighing up to 785kg can be lifted, transported and installed in a safe and straightforward manner. The new Winlet 1000 combines superior lifting capacity and reach with a unique compact design with the ability to transport glass over rough terrain and through narrow doorways with ease. With the Winlet 1000 low weight, it makes it possible to go where heavier machines cannot due to surface pressure. 4metre 3 2 1 Winlet 785 Winlet 785 Tecñical Specifications Winlet 1000 700mm Pick and Place 2 1 0 1880mm 1370mm 275mm 4metre 3 2 1 1795mm Reach 375mm 890mm 1200mm (twin wheels 2 1 0 Max 275kg 785kg Max capacity 1000kg 275kg Max capacity on side 300kg 1075kg Total weight excl. counterweights 1340kg 1350kg Total weight incl. counterweights 1800kg 890mm External width 870mm 1200mm External width with twin wheels 1200mm 1880mm External length 2070mm 1795mm External height 1800mm 2500/3900mm Min/max extension (front bumper to suction cup) 670/2600mm 3900mm Max lifting height (to centre of lifting yoke) 4100mm 75mm Hydraulic side offset 175mm 200mm Fine lift on arm 200mm 180 Tilt function 180 180 Hydraulic rotation 360 4 x Ø 410mm Suction cups 4 x Ø 270mm 8 x Ø 350mm 2 x 150 AH Battery 2 x 95 AH Winlet 1000 670mm 670mm Pick and Place 5metre 4 3 2 1 2 1 0 1800mm 460mm Reach 870mm 1200mm (twin wheels) 5metre 4 3 2 1 2 1 0 42 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Vacuum Robots Wired Remote Control Battersea Power Station, London Our main contractor has commended us for using the Winlet and has put us forward for its Innovation in Safety Award. They are impressed with its zero manual handling capability. Our clients are saying it s a revelation. Their operations have become safer, faster, and less labour-intensive, which means lower costs as well as better service to end-user customers. UK and Ireland Distributor Vacuum Robots course Email: info@hird.co.uk 43

1800mm The Winlet glazing robot has an extendable jib, or boom. This is controlled with a hydraulic ram. When fully closed, the jib head is 700mm from the front of the glazing robot. When fully extended, it is 1800mm from the front of 7700 70 0000 the machine. Linear side shift ram One of the unique benefits of Winlet, much appreciated by clients, is that side shift of glass panels is linear, so they remain perfectly aligned with the glazing aperture. This is achieved with a ram attached to the 890mm 990 00mm mm Rival glazing robots side manipulator889 head. shift using their wheels, resulting in a curved motion, so panels do not remain aligned. 166 1600mm Extendable jib Steering control arm The Winlet glazing robot is moved into position using the steering 33777000m 0mm mm time, the 275 227 7755operator arm. At 11370mm the same controls the speed of movement via the steering arm control pad. Counterweights Stability during glass installation is provided by 275kg counterweights at the back of the glazing robot. These are removed during transportation. Manipulator head This allows the glass sheet to be moved precisely into position. The manipulator head can be tilted and rotated through 180 degrees. This allows a glass sheet to be lifted overhead. Articulated rear axle The Winlet glazing robot is easily steered using an articulated rear axle. This allows the operator to position the machine precisely for optimum glass installation control. Vacuum cups The Winlet glazing robot has a vacuum lifter with four vacuum cups. Extension arms can be fitted to increase the pad spread. In the event of a catastrophic vacuum failure, the one-way air valves remain open, so the panel is never dropped. The Winlet 575 has a maximum lifting capacity of 575kg. Load stabilising arms Pneumatic front wheels The glazing robot s front wheels have pneumatic tyres to assist in moving over rough terrain. Twin tyres can be fitted to provide added stability if it is needed. The front wheels are the machine s drive wheels. These are not load-bearing, but help stabilise the glazing robot when it is being moved across rough terrain. 44 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Wheels in narrow access configuration 618 Wheels in the working configuration 820 Glazing Robots Used in conjunction with other pieces of glass handling equipment, glazing robots have been designed to comply with manual handling regulations specifically related to handling composite and unitised windows. Lifting capacity up to 500kg Fits through standard doorway Battery power for quiet, emission free operation Vacuum Robots Vacuum Robots course Glaslift Geko+MRT4 Glaslift Geko PV Glaslift Geko PV+ 250kg 250kg 175kg Geko+MRT4 glazing robot with a detachable vacuum system. Geko PV glazing robot is ideal machine for handling composite and unitised windows. Geko PV+ glazing robot with horizontal pick-up & rotation through 180 for overhead installation. Tecñical Specifications Geko+MRT4 Geko PV Geko PV+ Glaslift+MRT4 2-in-1 PV PV+ Max capacity 250kg 250kg 175kg Weight 467kg 460kg 500kg Min outside wheel width 618mm 618mm 618mm Max outside wheel width 820mm 820mm 820mm Travelling length 1970mm 2070mm 3100mm Max height 2655mm 2460mm 3000mm Travelling height 1265mm 1265mm 1265mm Tyre pressure - front / Rear 4.5 / 7.5 bar 4.5 / 7.5bar 4.5 / 7.5 bar Battery 12v DC 12v DC 12v DC Battery charger 110v 110v 110v Battery recharge time (approx) 8 hours 8 hours 8 hours Hydraulic horizontal arm capacity n/a option 175kg 2655 with extension arms 2395 without extension arms 1850 1970 1265 2460 2070 1880 1265 3000 180 Tilting 3100 1880 1265 Email: info@hird.co.uk 45

Glazing Manipulator The Wirth Oktopus GL-CC777600 has all the benefits and precision of a glazing robot now with the added reach of a mini crane. Designed to fit on our Maeda range of mini cranes, it offers a maximum working height of 16m. Dual independent vacuum circuits with two vacuum reserve tanks and two non-return valves Vacuum gauge for each circuit Audio-visual low vacuum alert On-board maintenance-free vacuum pump 24v rechargeable battery with integral 110v or 240v charger and battery energy gauge Extension arms included for lifting larger loads Approved Distributor 600kg 95 o rotation Tecñical Specifications Dimensions: HxWxD mm 850mm (1280mm with extensions) x 960mm (1880mm with extensions) x 1250mm Vacuum system : dual circuit 2 pumps, 2 vacuum tanks Suction cup quality: black rubber, not abrasion resistant, heat resistant up to 100 C Number of suction cups: 4 8 Loading capacity of frame: (on smooth and clean surface at 60% vacuum) 300kg 600kg Suction cup dimension: 4 x 400mm 8 x 400mm Powered head unit up & down 60 Powered pad frame rotation rotation 95 Powered head slew left & right 40 Weight of lifter: 170kg Structural depth: 1250mm Output: 1.5m 3 /h Voltage: pump: 24v DC from 2 rechargeable batteries battery charger: 110v/240v 50/60Hz single phase factory selectable Accessories: External battery pack and charger for radio control 400 Extension arm with suction cup The Wirth Oktopus Glazing Manipulator is the perfect companion to the Maeda Mini Cranes, see pages 12-21 850 1280 960 1880 Vacuum Robots course 46 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Oktopus Glass Manipulator and Maeda MC405 Talk to Hird today about how the right equipment can improve operator safety and productivity on your lifting project Vacuum Robots Email: info@hird.co.uk Email: info@hird.co.uk 47

Automated Counterbalance Lifter Oktopus GGA-EF 1000 Side Automated Counterbalance Lifter Co-designed by Hird & leading vacuum manufacturer Wirth, this is the next generation counterbalance lift beam. With adjustable overhang up to 1.2m, 1000kg capacity and automatic counterweight adjustment, installing large elements under deep soffits just became a lot easier! Approved Distributor 1000kg Tecñical Specifications Dimensions Height 1790mm Length 2750mm Overhang Adjustable Minimum 255mm Maximum 1255mm Stowed Dimensions Height 990mm Length 3010mm Inclination Maximum ±10 o Power Batteries 24v / 12Ah Automated Counterbalance Lifter Crane Oktopus Vacuum Lifter Glass The Oktopus Automated Counterbalance Lifter is the perfect companion to the Oktopus GL-RN 400 (pg57) GL-RN 600/800 (pg66) and GL-KN-1000 (pg69) 1790mm Vacuum Robots course 2750mm min. 225mm max. 1255mm 48 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Adjustable Mini Floor Crane Floor Cranes Wienold MFC750K/Ks Counterbalance Floor Cranes Counterbalance floor cranes with hydraulic lifting arm. Max lifting capacity 900kg (738kg for shorty version) Max hook height 3.05m Perfect for office, showroom and shop front glazing, fitting below architectural features when used in conjunction with a vacuum lifter Can be quickly and easily assembled and disassembled for transport Lockable wheels 900kg Tecñical Specifications MFC750 KS MFC750 K Lighting Height (Below the hook) 3.05m 3.05m Transport Position (Height x Length x Width 2 ) 1.00-1.92m x 1.20m x 0.65m 1.00-1.92m x 1.20m x 0.65m Working Position (Height x Length 1 x Width 2 ) 1.92m x 1.20m x 0.65m 1.92m x 1.80m x 0.65m Loading Height min: 0.85m 0.85m Boom extension Each position 120mm 120mm Boom Length Max 1.20m 1.20m Capacity max. (Distance from front wheel : hook = 0.52m) 900kg 475kg Weight of chassis incl. boom 3 160kg 160kg Weight of counterweights (28 x 16kg) incl. 2 Boxes 490kg 490kg 1 Footprint without steering bracket. 2 With all-terrain tyres = 0.78m and 3 weight add 28kg 1 2 3 4 5 6 7 8 9 MFC750 KS - The Shorty MFC750 K Fitted with optional All-terrain tyres 750 kg 650 kg 550 kg 500 kg 450 kg 400 kg 350 kg 300 kg 250 kg 200 kg 150 kg 100 kg 50 kg K (2x Box) K (2x Box) K (1x K Box) (1x Box) Ks (1x Box) Ks (2x Box) 260mm 540mm 840mm 1120mm 1400mm 400mm 700mm 980mm 1260mm Counterbalance floor crane Email: info@hird.co.uk 49

GML800+ Counterbalance Material Lift The Wienold GML800+ material lift has a class leading 800kg maximum lifting capacity. Simple to transport, set-up and very easy to use. The electric drive versions raise and lower the load via remote controlled winch. Manufactured from high grade materials in Germany. Capacity 800kg Working height up to 7.94m Six large braked castors for ease of movement Remote control mast with variable speed control Compact working & transport position Dual safety brakes on the mast Low 5cm loading height Lateral outriggers Safe sensor-stop Lifting eye Exclusive to Hird GML 800+ fully elevated with Overhead Manipulator attachment 800kg Tecñical Specifications GML800+ M (15) GML800+ DC GML800+ AC Capacity 800kg 800kg 800kg Working Height 4.57m 7.94m 7.94m Width 780mm 780mm 780mm Length (working) 2200mm 2200mm 2200mmm Weight: dead weight - lift only 260kg 352kg 352kg inc counterweights 467kg 565kg 559kg Drive N/A DC 2 x 12v/105Ah AC 230/110v Power Manual Battery Mains Counterbalance floor crane 50 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Floor Cranes GML Overhead Glazing Manipulator (500kg) The GML Overhead Glazing Manipulator has been co-designed by Hird, Wienold & Kappel to create this cutting edge machine capable of lifting 500kg up to 7.9m in an overhead position. Fully automated via radio remote control (vacuum, 360 rotation, 90 degree tilt, lateral side tilt + / - 10 degree) Counterbalance floor Crane 500kg Tecñical Specifications Lifting Capacity: 500kg up to 7.94m Suction Cups: 8 x 300mm Ø Weight of lifter: 150kg Voltage: 110v/240v dual voltage charge (manipulator charges through GML800) Total Weight: 715kg (with GML 800) 990 1245 2583 GML 800+ Accessories Forklift Pockets Extendable Forks (710mm Closed 1200mm Extended) Electric Telescopic Boom c/w Swivel Function (420mm Closed 620mm Extended) Extendable Crane Boom (300mm - 750kg, 460mm - 500kg, 610mm - 400kg) Email: info@hird.co.uk 51

Counterbalance Floor Cranes Counterbalance floor cranes are ideal for a large number of glass handling requirements and give the operator complete 360 degree freedom of movement. Our range of counterbalance floor cranes is made up of Glasboy and Glasmax models and can handle loads of up to 500kg. All models are used in conjunction with a glass vacuum lifter, with some suitable for vertical glazing, whilst all are suitable for ground level glazing. Glasmax SLK 25 Roust-A-Bout 500kg Multi-function lightweight manual hoist Easily transportable by van Simple to assemble for use Used extensively with vacuum lifters for glazing Powered 240v winch option available 300kg Counterbalance hoist with counterbalance weights Heavy load steel platform Swivel casters Flexible lightweight hoist Dismantles to fit inside a van Removable counterweights for ease of transport Can be fitted with a glass vacuum lifter or winch 680kg Versatile lift with load height adjustment Tee-Head extension bar, lift wider loads up to 455kg Lift and place loads in tight locations impossible for other lifts Moves vertically and horizontally 2 winches allow load and mast elevation to be controlled separately Tecñical Specifications Glasmax 250 Glasmax 500 SLK 25 R-250 Capacity 250kg 500kg 300kg 680kg Hook height 7.5m 4.8m 7.9m 7.6m Width 800mm 800mm 800mm 1500mm Length 1920mm 1920mm 2220mm 1500mm Weight: dead weight - lift only 125kg 205kg 204kg 170kg inc counterweights 225kg 405kg 332kg NA 52 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Big Foot, Glasboy (up to 500kg) Counterbalance Floor Cranes Floor Cranes Counterbalance floor cranes with hydraulic lifting arm. Max lifting capacity 280kg, 330kg or 500kg Big Foot Max hook height 2.76m Perfect for office, showroom and shop front glazing, fitting below architectural features when used in conjunction with a vacuum lifter Ideal for lifting loads from below when fitted with an electric hoist Can be quickly and easily assembled and disassembled for transport Lockable wheels Glasboy 330 Counterbalance floor crane 500kg Tecñical Specifications Big Foot Glasboy 330 Glasboy 500 Max capacity pos 1 280kg 330kg 500kg Max capacity pos 2 250kg 300kg 420kg Max capacity pos 3 220kg 270kg 370kg Max capacity pos 4 190kg 250kg 300kg Weight: dead weight - lift only 115kg 118kg 130kg inc counterweights at 24kg 264kg 406kg 706kg Counterweights No. 6 12 24 Max hook height 2760mm 2760mm 2760mm Glasboy 500 Big Foot Glasboy Email: info@hird.co.uk 53

Material Hoists Block and Tackle The Hird range of material hoists offers portable lifting options allowing you to safely lift heavy loads around sites. Material Hoists With both manual and automatic options, material hoists can carry loads of up to 1000kg in weight. Material hoists are often paired with glass vacuum lifters and used for applications such as ground level shop front glass installation. We offer competitive rates on short term hire and long term hire on our full range of material hoists. 500kg 1000kg 1000kg 0.5t Portable motorised wire rope hoist - Minifor TR50 2.5m remote cable as standard (additional lengths available) Emergency stop function Quick installation Long wire rope length Easy to use, lightweight, robust, powerful 1t Manual chain hoist - Tralift Robust design Swivel hook with safety catch Hook with overload indicator Automatic brake, double pawls Heavy duty bearings The chain length can be adjusted in the neutral position Load limiter 1t Electric chain hoist - Lodestar 3-Step variable speed control 4.5m remote cable as standard Lift Speed 0-16 FPM Electric disc & regenerative brake H4 service classification Complies with ASME/ANSI B30.16, B-10 - Standards 0.5t - Electric Hoist 1t - Manual Chain Hoist 1t - Electric Chain Hoist Capacity 500kg Number of falls 1 Rope length Various Hoist weight 33kg Power source 110v Remote control length 2.5m Wire rope lengths available: 30m, 60m, 120m Capacity 1000kg Number of falls 1 Chain length Various Hoist weight 12kg Power source Manual Remote control length - Chain lengths available: 6m, 9m, 12m Capacity 1000kg Number of falls 1 Chain length Various Hoist weight 40kg Power source (Voltage @ 60 Hz 460) Electric Remote control length 4.5m Chain lengths available: 6m, 30m 54 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Lifting accessories Anchors 3ton Leverhoist 1.5m of load chain Easy to operate Wide opening swivel hooks with latch Comfortable rubberised handle Longer chains available Weight 21kg Adjustable Beam Clamp Portable adjustable steel anchor device For use on horizontal steel beams Size of profile:from 65mm to 120mm Weight 4kg Adjustable Beam Trolley Portable adjustable steel anchor device For Use on horizontal steel beams Size of profile: from 65mm to 120mm Weight 5.2kg EN 795 Class B Portable Man Anchors Fall Arrest Block / Beam Trolley Clamp Portable Roof Man Anchors Ideal for Fall Protection / Restraint when working on flat roofs where there is no suitable anchor point Suitable for one person only 12 weights Included, 18.5kg each Special rubber base for extra grip Chassis made from fire zinc galvanised steel Fall Arrest Inertia Reel Block 12m long and just 4.9kg Maximum rated load - 140kg 4mm galvanised wire rope Easy to carry and install 2t - Adjustable Trolley Clamp Adjustable from 76mm to 203mm Easily adjustable to fit most beams by turning central threaded adjusting bar Locking lever secures the adjustment Weight 15kg Email: info@hird.co.uk 55

Gantry, Forklift Attachment and Transport Trucks Porta-Gantry 5000 Angled Fork Lift Attachment 500kg to 5000kg Unique portable gantry system that can safely lift up to 5000kgs. Quick and easy manual assembly. 4 Simple and portable components Available with lifting capacities from 500kgs to 5000kgs 360 swivel-locking castors as standard for easy positioning, all terrain castors & uneven ground options available Simple, manual height & span adjustment Ultra-safe, captive trolley CE & EN 795 Class B approved by Notified Body Weight 92kg - 294kg 1500kg The angled beam is extendable to enable access in difficult to reach areas, for use with forklifts or telehandlers. Extendable angled beam provides access in difficult-to-reach areas Short jib capacity 1500kg Extended jib capacity 1000kgs Easily secured to forks Carry handle Lifting bail will suspend vacuum lifter or other equipment Weight 55kg Full details upon request 4-Wheel Turntable Truck Pallet Truck 1000kg SWL 1000kg Dimensions: 1500mm x 750mm Solid steel construction with heavy duty wooden bed Solid tyres 2000kg Capacity 2000kg Forks dimensions - 550mm wide x 1100mm long 3 position control handle Weight 78kg 56 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Timber Billets and Outrigger Mats Accessories Cranes with outriggers provide a solid platform for the cranes safe operation and efficient use. Hird provides its customers with a range of timber billets and outrigger mats to use in conjunction with any crane that requires outriggers. Statistics show that at least 50% of accidents involving cranes occur because outriggers have not been set up correctly. The Hird range of billets and mats are essential accessories to spread loads, reduce floor loading and ensure a more stable lifting base. Timber Billets & Sleepers Timber Billets / Sleepers for placement under a cranes outrigger feet, they spread the load to create a more stable lifting base. Made from high quality timber for durability Spread load to create more stable lift base Helps reduce floor loadings Various sizes available depending on floor loading Outrigger Mats Outrigger (Crane) Mats for placement under a cranes outrigger feet, these mats spread the load to reduce floor loading. Made from high resistance polyethylene for durability Spread load to create more stable lift base Helps reduce floor loadings Various sizes available depending on floor loading We also stock timber (bog) mats Timber Billets/Sleepers Outrigger (Crane) Mats Capacity Timber size spreads load point to suit application Capacity Mat size spreads load point to suit application If you have any doubts at all about floor loading, or to specify the correct machine for your project, then please call the Hird lifting team on 0203 174 0658. Email: info@hird.co.uk 57

Glass Trolleys Glazing Accessories Our range of trolleys (sometimes referred to as stillages) is designed to transport sheets of glass and other materials weighing up to 1500kg. A-frame trolleys, plate glass trolleys and slab buggies are used particularly in conjunction with our range of glass handling equipment, such as vacuum glass lifters and glazing robots. The trolleys enable workers to move loads safely and quickly by hand, whilst preventing materials from slipping. Manual handling awareness 1000kg 1000kg Small A-frame Large A-frame Capacity Trolley size 1000kg L1600 x W850 x H1600mm Capacity Trolley size 1000kg L2000 x W1200 x H1850mm Plate Glass Trolley 700kg Capacity 700kg 40mm max sheet thickness Fully adjustable for sizes between 2500mm to 4000mm Support rods available for loads up to 6000mm Designed for transporting large insulating panes or shop windows Collapsible for easy transportation Steering from both ends 58 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Accessories A-frame trolleys feature Capacity up to 1500kg 4 wheeled A-frame stillage Swivel casters including locking brakes Easy movement via steering castor Wooden lined to protect material and prevent material from slipping Lifting eyes (certificated liftable) Forklift points (certificated liftable) *Not suitable for road transportation when loaded 1000kg 1500kg Liftable (certificated liftable) A-frame Capacity 1000kg Trolley size L2000 x W1200 x H1850mm High sided (certificated liftable) A-frame Capacity 1500kg Trolley size L2000 x W1400 x H3000mm Slab Buggy 400kg Capacity 400kg 280mm max slab thickness Max slab size: 1360mm high, 1300mm long slab Wooden lined to protect material and prevent material from slipping Designed for stability but compact enough to fit inside a small van Easy movement via steering castors, include locking brakes Pneumatic rear tyres Email: info@hird.co.uk 59

Plate Glass Trolleys Hird glass carts The Hird designed and built glass cart range is designed to support the installation of larger, heavier and even curved glass panels. Hird glass carts trolleys are perfect for busy work sites installing glass panels. The range includes an ultra narrow version designed for working in confined spaces, a heavy duty model for very large thicker plates of glass and a trolley suitable for handling large curved panels of glass. Manual handling awareness 700kg Ultra Narrow Plate Glass Trolley Capacity 700kg 80mm max sheet thickness Fully adjustable for sizes between 2000mm 3500mm Designed for transporting large double glazed units or shop windows Collapsible for easy transportation Steering from both ends Capacity 700kg 1000kg Heavy Duty Plate Glass Trolley Capacity 1000kg 100mm max sheet thickness Fully adjustable for sizes between 2000mm 3500mm Support rods available for loads up to 6000mm Designed for transporting large double glazed units or shop windows Collapsible for easy transportation Suitable for partial off-road use 60 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Accessories 1000kg Curved Plate Glass Trolley Capacity 1000kg 100mm max sheet thickness Fully adjustable for sizes between 2000mm 3500mm Support rods available for loads up to 6000mm Designed for transporting large double glazed units or shop windows Collapsible for easy transportation Suitable for partial off-road use Email: info@hird.co.uk 61

Hand Cups Glass Lifting Accessories Glass lifting accessories can make a big difference in making sure that a job can be carried out quickly and effectively. Hird can supply a number of useful accessories. These include webbing straps and slings, bow shackles, corner protection blocks, shrouds, pump-activated suction lifters and lever-activated suction lifters. All of our glass lifting accessories are ideally suited for use with the Hird range of glass lifting and glass handling equipment. Pump-activated hand grips Bohle VERIBOR blue line 120kg PH3001 - Pump-activated suction lifter with pressure gauge Suction pad 210 mm Ø Number of suction pads 1 Load capacity 120 kg Lifting direction parallel Weight 1.92 kg 120kg PH3002 - Plastic suction lifter with priming pump Suction pad 210 mm Ø Number of suction pads 1 Load capacity 120 kg Lifting direction parallel Weight 1.375 kg 120kg PH3003 - Aluminium suction lifter with priming pump Suction pad 210 mm Ø Number of suction pads 1 Load capacity 120 kg Lifting direction parallel Weight 1.545 kg 110kg PH3004 - Aluminium suction lifter with priming pump Suction pad 210 mm Ø Number of suction pads 1 Load capacity 110 kg Lifting direction parallel Weight 1.536 kg 80kg PH3005 - Aluminium suction lifter with priming pump Suction pad 220 mm Ø Number of suction pads 1 Load capacity 80 kg Lifting direction vertical Weight 1.54 kg 120kg PH3006 - Aluminium suction lifter with priming pump Suction pad 80 x 380 mm Number of suction pads 1 Load capacity 120 kg Lifting direction vertical Weight 1.625 kg 62 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Pump-activated suction lifters Wood s Powr-Grip Glass lifting accessories 57kg PH3007 - Plastic pump-activated suction lifter for curved surfaces Suction pad 200 mm Ø Number of suction pads 1 Load capacity 57 kg Lifting direction parallel Weight 1.5 kg 57kg PH3008 - Metal pump-activated suction lifter for curved surfaces Suction pad 200 mm Ø Number of suction pads 1 Load capacity 57 kg Lifting direction parallel Weight 1.9 kg 79kg PH3009 - Metal pump-activated suction lifter for curved surfaces Suction pad 254 mm Ø Number of suction pads 1 Load capacity 79 kg Lifting direction parallel Weight 2.308 kg 50kg PH3010 - Suction lifter with manual pump Suction pad 150 mm Ø Number of suction pads 1 Load capacity 50 kg Lifting direction parallel Weight 0.5 kg 30kg PH3011 - Oval suction lifter with manual pump Suction pad 150 x 75 mm Number of suction pads 1 Load capacity 30 kg Lifting direction vertical Weight 0.405 kg 15kg PH3012 - Suction lifter Suction pad 120 mm Ø Number of suction pads 1 Load capacity 15 kg Lifting direction vertical Weight 0.405 kg Manual handling awareness PH3013 - Suction Positioning Device Suction pad Adaptor 20, 26 & 32 mm Ø Number of suction pads 1 Load capacity - Lifting direction vertical Weight 0.0646 kg Call the Hird Glazing Team on 0203 174 0658 Email: info@hird.co.uk 63

Transport Aids Glass Lifting Accessories Glass Transporting Pliers available in three configurations Robust transporting pliers Handling all kinds of sheet material Easy to use for single sheet handling Hoisting tool, simply lift the glass transporting pliers above the object to be transported 1000kg PH3014 - For material 4-20mm thick 1000kg PH3015 - For material 15-38mm thick 600kg PH3016 - For material 3-20mm thick Load capacity Material thickness Weight 1000 kg 4-20 mm 43.58 kg Load capacity Material thickness Weight 1000 kg 15-38 mm 28 kg Load capacity Material thickness Weight 600 kg 3-20 mm 34.46 kg Clamping Carriage Self-Clamping Glass Carrying Devices Air tyres for quiet transport Materials up to 100mm width and 200kg weight Inner felt linings Two spacing inserts 250x70x30mm for thin material Suitable for transporting sheet material Load is held firmly between two non-slip, rubber-lined clamps The heavier the load, the stronger the clamping action Suitable for transporting all kinds of materials The load is held firmly between two non-slip, rubber-lined clamps The heavier the load, the greater the clamping pressure PH3017 - Clamping Carriage PH3018 - Tragkuli PH3019 - Tragboy Tryes Length Width Height Weight Air filled 30 cm 30 cm 30 cm 7.72 kg Opening range Load capacity Weight up to 40 mm per pair 160 kg 5.24 kg Opening range Load capacity Weight up to 25 mm per pair 80 kg 2.2 kg 64 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Glass Carrying Straps Glass Lifting Accessories Glass lifting accessories Safety Strap Adjustable Strap Cross Strap Leather Strap Heavy-duty linen carrying strap Hand slings included Leather chafe protection Cross strap prevents glass sheet sliding out Heavy-duty linen carrying strap Leather chafe protection Adjustable length 40mm and 80mm widths Heavy-duty linen carrying strap Leather chafe protection Adjustable length Leather carrying strap Shaped wooden handles Chafe protection from felt lining PH3020 - Safety strap PH3021 - Adjustable strap PH3022 - Cross strap PH3023 - Leather strap Length Width Weight 1650 mm 80 mm 0.295 kg Length Width Weight 1650 mm 40 mm / 80 mm 0.1426 kg / 0.24 kg Length Width Weight 5200 mm 80 mm 0.704 kg Length Width Weight 1100 mm 70 mm 0.58 kg Glass Lifting Strap Hemp Strap Wooden Glass Corner Holder Protective corner holder for use when transporting sheet material 120mm built-in suction cup Suitable for all materials with smooth, flat, airtight surfaces Examples glass plastic metal coated wood marble PH3400 - Glass lifting strap PH3024 - Hemp strap PH3025 - Material up to 30mm PH3026 - Material up to 60mm Lifting Capacity 1t Lengths 1m Material Polyester Width Lengths Weight 40 mm Various 0.057 kg Suction pad Panel thickness Weight 120 mm Ø max. 30 mm 0.5654 kg Suction pad Panel thickness Weight 120 mm Ø max. 60 mm 0.7 kg Certified under BS EN 1492-2:2000 Exclusive to Hird Email: info@hird.co.uk 65

Lifting Slings Lifting Accessories Simple but vital accessories, Hird lifting straps are strong, durable and a necessity for all types of lifting. Hird stock a comprehensive range of lifting slings for its customers for a wide range of applications. Duplex Polyester Webbing Sling Round Sling (Endless sling) Duplex lifting sling Lengths of 1m, 2m and 3m for 1, 2 and 3 ton 7:1 Safety factor Colour coded in accordance with EN14921-1 1 to 4 ton Extra strength 2 ply lifting sling Durable and twist/kink resistant Lengths of 1m, 2m and 3m for 1, 2 and 3 ton 7:1 Safety factor Colour coded in accordance with EN14921-1 1 to 4 ton Duplex polyester webbing sling Round sling (Endless sling) 1 ton PH3121 PH3122 PH3123 PH3124 PH3125 PH3126 2 ton PH3221 PH3222 PH3223 PH3224 PH3225 PH3226 1m x 1t 2m x 1t 3m x 1t 4m x 1t 5m x 1t 6m x 1t 1m x 2t 2m x 2t 3m x 2t 4m x 2t 5m x 2t 6m x 2t 3 ton PH3321 PH3322 PH3323 PH3424 PH3325 PH3426 4 ton PH3421 PH3422 PH3423 PH3424 PH3425 PH3426 1m x 3t 2m x 3t 3m x 3t 4m x 3t 5m x 3t 6m x 3t 1m x 1t 2m x 1t 3m x 1t 4m x 1t 5m x 1t 6m x 1t 1 ton PH3131 PH3132 PH3133 2 ton PH3231 PH3232 PH3233 1m x 1t 2m x 1t 3m x 1t 1m x 2t 2m x 2t 3m x 2t 3 ton PH3331 PH3332 PH3333 4 ton PH3431 PH3432 PH3433 1m x 3t 2m x 3t 3m x 3t 1m x 4t 2m x 4t 3m x 4t Can t see what you are looking for? Call the Hird lifting team on 0203 174 0658. 66 Customer Services Northern 01482 227333 Central 01302 341659 Southern 0203 174 0658

Secondary Safety Device Glass Lifting Accessories Lifting accessories Hird s secondary safety device offers an additional safety factor when using Hird s range of vacuum lifters. Designed to be securely tightened around the load and attached to the crane hook using heavy duty polypropylene straps. In the event of a machine failure resulting in the loss of vacuum, Hird s secondary safety device will allow the load to be safety lowered to the ground. Variable length side straps allow for use on most types of lifters. Hire & Sales 1.5 ton For glass lifting advice or any additional requirements, please contact the Hird Glass Handling Division direct on 0203 174 0658 Safe use of slings 1. When selecting slings, always take into account the size, shape and weight of the load you will be lifting. 2. Make sure you plan the lift and lowering operation before beginning. 3. Always examine your sling, ensuring that it has no defects and that its specifications are suitable for the job. 4. Make sure that your sling is protected from sharp edges, friction and abrasion, whether from the load or from the lifting appliance. 5. Slings should be used in a manner that spreads a load uniformly across their width. 6. All polyester slings have a selective resistance to chemicals. Seek advice if exposure to chemicals is likely. 7. Polyester slings are suitable for use at temperatures up to 100 C and down to -40 C. 8. Ensure the load is balanced, that it is free to be lifted and undertake a trial lift. 9. Slings should only be used by trained operatives who are familiar with the method of rating and application of mode factors. 10. Slings should never be overloaded. 11. Slings should never be tied in knots or twisted. 12. Never use a damaged sling or attempt to repair a damaged sling. 13. Do not trap the sling when lowering a load and do not attempt to pull the sling from beneath a load. 14. Do not drag a load in the sling, or allow the sling to be dragged over the ground. 15. Avoid snatch or shock loading. Email: info@hird.co.uk 67

PHS-2018-1