2 Pine Trees, hertsey Lane, Staines-upon-Thames, TW18 3HR, UK SA Group Testing UK Ltd ISO/IE 17025:2005 Unit 6 Hawarden Industrial Park Hawarden Deeside H5 3US ontact: Mr S P ork Tel: +44 (0)1244 670900 Fax: +44 (0)1244 681330 E-Mail: steve.cork@csagroup.org Website: www.csagroupuk.org below Laboratory locations: s covered by the organisation and their relevant activities details Activity code Address Unit 6 Hawarden Industrial Park Hawarden Deeside H5 3US Local contact Mr S P ork Tel: +44 (0)1244 670900 Fax: +44 (0)1244 681330 E-Mail: steve.cork@csagroup.org Website: www.csagroupuk.org All Assessment Manager: AS1 Page 1 of 13
2 Pine Trees, her t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, UK ISO/IE 17025:2005 SA Group Testing UK Ltd DETAIL OF AREDITATION ode SETION 1: Electrical omponents, Accessories Atmospheres Electrical Product Tests Electrical Apparatus, Systems, omponents, Accessories and Enclosures for use in potentially Explosive Atmospheres Tests for the General Requirements for Electrical Apparatus for Potentially Explosive Atmospheres or Hazardous (lassified) s General Requirements Thermal Stability min temp - 80 IE 60079-0:2011 IE 60079-0:2007 (withdrawn) IE 60079-0:2004 (withdrawn) Resistance to light on Non-metallic enclosures harging tests (lause 26.14, 60079-0:2004, 2007 and 2011) Max enclosure size for Thermal Stability test 1500 x1000 x 1000 mm FM 3600:2011 excluding rubber or neoprene tests FM 3616:2011 22.2 No 0 :2010 22.2 No 0.4-04:2013 22.2 No 94.1-07:2012 excluding crushing resistence tests UL50:2012 excluding crushing resistence tests 22.2 No 142-M1987:2009 excluding clause 6.6, 6.7, 6.11 (Polymeric Enclsures) and 6.14 Assessment Manager: AS1 Page 2 of 13
2 Pine Trees, her t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, UK ISO/IE 17025:2005 SA Group Testing UK Ltd ode SETION 1: Electrical omponents, Accessories Atmospheres Electrical Product Tests Tests for Oil Immersed Apparatus (Exo) IE 60079-6:2015 IE 60079-6 :2007 (withdrawn) Tests for Pressurised and Purged Apparatus (Exp) IE 60079-2:2014 IE 60079-2 :2007 (withdrawn) Tests for Sand Filled Apparatus (Exq) IE 60079-5:2015 IE 60079-5 :2007 (withdrawn) Tests for Apparatus in Flameproof Enclosures (Exd) For 60079-1 lause 15.1.2/15.1.3, min temp - 80 lause 15.2, max temp 300 IE 60079-1:2014 excluding flammability tests IE 60079-1:2007 excluding flammability tests FM 3615:2006 excluding flammability tests Assessment Manager: AS1 Page 3 of 13
2 Pine Trees, her t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, UK ISO/IE 17025:2005 SA Group Testing UK Ltd ode SETION 1: Electrical omponents, Accessories Atmospheres Electrical Product Tests Tests for Apparatus in Flameproof Enclosures (Exd) For 60079-1 lause 15.1.2/15.1.3, min temp - 80 lause 15.2, max temp 300 22.2 No. 30 M1986 (reaffirmed 2012) excluding: Arc-Rupturing Flammability Gastight Joints Type Test UL 1203:2013 excluding 21.5, 21.6, 21.7, 21.8, 21.9, 24, 31, 34, 41, 43.9, 44.9, 45 & 56 Tests for Increased Safety Apparatus (Exe) IE 60079-7:2015 IE 60079-6 :2007 (withdrawn) Excluding Interturn Voltage Test as IE 60044-6 Shock tests on Secondary Batteries greater than 25 Ah Sulphur dioxide test for bi-pin lamp caps/lampholders Vibration test luminaires with bi-pin caps/lampholders Tests for high-voltage machines Tests for Intrinsically Safe Apparatus, Associated Apparatus and Systems (Exi) IE 60079-11:2011 IE 60079-11:2006 22.2 No 94.1-07:2012 excluding crushing resistence tests UL50:2012 excluding crushing resistence tests Assessment Manager: AS1 Page 4 of 13
2 Pine Trees, her t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, UK ISO/IE 17025:2005 SA Group Testing UK Ltd ode SETION 1: Electrical omponents, Accessories Atmospheres Electrical Product Tests Tests for Encapsulated Apparatus (Exm) IE 60079-18:2009 (withdrawn) IE 60079-18:2014 Tests for Electrical Apparatus for Explosive Atmospheres with Type of Protection n (Exn) IE 60079-15:2010 IE 60079-15:2005 (withdrawn) :Excluding Tests for ballasts in circuits with ignitors Mechanical shock for batteries Ignition tests for large high-voltage machines 22.2 No 94.2-07:2012 clause 8.6, 8.10, 8.11, 8.14 & 8.15 UL50E:2012 clause 8.6, 8.10, 8.11, 8.14 & 8.15 Intrinsically safe systems onstruction, safety and IE 60079-25:2010 IE 60079-25:2003 (withdrawn) Special requirements for construction, Test and Marking of Electrical Apparatus of Equipment Group II, ategory 1G onstruction, safety and IE 60079-26:2006 (withdrawn) IE 60079-26:2014 Tests for Fieldbus intrinsically safe concept (FISO) onstruction, safety and IE 60079-27:2005 IE TS 60079-27:2002 (withdrawn) Equipment dust ignition protection by enclosure t onstruction, safety and IE 60079-31:2008 (withdrawn) IE 60079-31:2013 FM 3616:2011 Assessment Manager: AS1 Page 5 of 13
2 Pine Trees, her t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, UK ISO/IE 17025:2005 SA Group Testing UK Ltd ode SETION 1: Electrical omponents, Accessories Atmospheres Electrical Product Tests Tests for Electrical Apparatus with Protection by Enclosure for use in the presence of ombustible Dusts onstruction, safety and Thermal Stability min temp - 80 BS 6467:Part 1:1985 (withdrawn) Appendix H.2 Max enclosure size for Thermal Stability test 795 x 825 x 800 mm Tests for Electrical Apparatus with Protection by Enclosure for use in the presence of ombustible Dusts onstruction, safety and IE 61241-0:2004 (withdrawn) Resistance to light Ageing test for material General requirements SETION 1: Electrical omponents, Accessories Atmospheres Non-Electrical Product Tests onstruction and Testing onstruction, safety and EN 50281-1-1:1998 lause 6.10 Radiating equipment IE 61241-1-1:1999 (withdrawn) Explosive atmospheres: Non-electrical equipment for explosive atmospheres - Basic method and requirements onstruction, safety and ISO 80079-36:2016 Assessment Manager: AS1 Page 6 of 13
2 Pine Trees, her t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, UK ISO/IE 17025:2005 SA Group Testing UK Ltd ode SETION 1: Electrical omponents, Accessories Atmospheres Non-Electrical Product Tests Explosive atmospheres. Non-electrical equipment for explosive atmospheres. Nonelectrical type of protection constructional safety ''c'', control of ignition sources ''b'', liquid immersion ''k'' onstruction, safety and ISO 80079-37:2016 Protection by enclosure td onstruction, safety and IE 61241-1:2004 (withdrawn) Protection by enclosure pd onstruction, safety and IE 61241-4:2001(withdrawn) Protection by enclosure id onstruction, safety and IE 61241-11:2005 (withdrawn) Protection by enclosure md onstruction, safety and IE 61241-18:2004(withdrawn) Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuel Safety Tests BS 7117:Part 1:1991, Amds 1 and 2 (withdrawn) Miners ap Lamps Safety Tests IE 60079-35-1:2011* *Excluding lause 10.8 Resistance to fire Protection by flow restricting enclosure "fr" onstruction, safety and EN 13463-2:2004 Assessment Manager: AS1 Page 7 of 13
2 Pine Trees, her t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, UK ISO/IE 17025:2005 SA Group Testing UK Ltd ode SETION 1: Electrical omponents, Accessories Atmospheres Non-Electrical Product Tests Electrical Trace Heating Tapes Tests to demonstrate compliance with constructional requirements and prove thermal performance lause 5.1.7 min temp - 80 IE 60079-30-1:2015 IE 62086-1:2001 (withdrawn) Flammability test Verification of rated output (Method b) Non-Electrical Apparatus, Systems, omponents, Accessories and Enclosures for use in Potentially Explosive Atmospheres Tests similar to those indicated above for electrical equipment Basic Methods and Requirements onstruction, safety and EN 13463-1:2009 (withdrawn) Excluding lause 8.3, flammability lause 8.4.4, Protective coating lause 8.5.6, hemical Substances Appendix D, charging test Protection by flameproof enclosure 'd' onstruction, safety and EN 13463-3:2005 DIMENSIONAL TESTS Mechanical able Glands Tests to demonstrate compliance with onstructional Requirements BS 6121:Part 1:1989 (withdrawn) BS 6121:Part 2:1989 (withdrawn) Seal ompression and Hardness Tensile Tests In the above section 1, where IE or EN standards have exact equivalents in BS, EN or BS EN Standards, these BS, EN or BS EN standards are also included in the accreditation. Assessment Manager: AS1 Page 8 of 13
2 Pine Trees, her t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, UK ISO/IE 17025:2005 SA Group Testing UK Ltd ode SETION 2: INGRESS PROTETION TESTS Ingress Protection Tests Enclosures for Electrical Equipment IP1X Protected against solid objects greater than 50 mm diameter IE 60529:1989 IE 60529:2001 IE 60529:2013 excluding IPX9 IP2X Protected against solid objects greater than 12 mm diameter IP3X Protected against solid objects greater than 2.5 mm diameter IP4X Protected against solid objects greater than 1.0 mm diameter IP5X Dust Protected Objects greater than 1800 x 950x1300x 920 x 860 mm FM 3616:2011 22.2 No 94.1-07:2012 excluding crushing resistence tests UL50:2012 excluding crushing resistence tests 22.2 No 94.2-07:2012 clause 8.6, 8.10, 8.11, 8.14 & 8.15 UL50E:2012 clause 8.6, 8.10, 8.11, 8.14 & 8.15 IPX6 Protected against heavy seas IP6X Dust Tight Objects greater than 950 x 920 x860 mm IPX1 Protected against dripping water IPX2 Protected against dripping water when tilted up to 15 IPX3 Protected against spraying water IPX4 Protected against splashing water Assessment Manager: AS1 Page 9 of 13
2 Pine Trees, her t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, UK ISO/IE 17025:2005 SA Group Testing UK Ltd ode SETION 2: INGRESS PROTETION TESTS Ingress Protection Tests Enclosures for Electrical Equipment IPX5 Protected against water jets IPX7 Protected against the effects of immersion Objects greater than 1800x950x1300 IPX8 Protected against submersion Objects greater than Ø 350 x 500 mm IE 60529:1989 IE 60529:2001 EN 60529:1991 EN 60947-1:1997, Amd 1, (withdrawn) Appendix only BS 4999:Part 105:1988, (withdrawn) EN 60034:Part 5:1986 (withdrawn) In the above section 2, where IE or EN standards have exact equivalents in BS, EN or BS EN Standards, these BS, EN or BS EN standards are also included in the accreditation. SETION 3 : GAS DETETORS Performance Tests ELETRIAL APPARATUS FOR THE DETETION AND MEASUREMENT OF FLAMMABLE GASES General requirements and test methods Performance requirements for Group I apparatus indicating up to 5 % (V/V) methane in air Performance requirements for Group I apparatus indicating up to 100 % (V/V) methane in air Performance tests BS EN 61779-1:2000*(withdrawn) Performance tests BS EN 61779-2:2000*(withdrawn) Performance tests BS EN 61779-3:2000*(withdrawn) Assessment Manager: AS1 Page 10 of 13
2 Pine Trees, her t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, UK ISO/IE 17025:2005 SA Group Testing UK Ltd ode SETION 3 : GAS DETETORS Performance Tests ELETRIAL APPARATUS FOR THE DETETION AND MEASUREMENT OF FLAMMABLE GASES Performance requirements for Group II apparatus indicating up to 100 % lower explosive limit Performance requirements for Group II apparatus indicating up to 100 % (V/V) gas Performance tests BS EN 61779-4:2000*(withdrawn) Performance tests BS EN 61779-5:2000*(withdrawn) Detectors for flammable gases ELETRIAL APPARATUS USED FOR DETETION OF OMBUSTIBLE GASES IN DOMESTI PREMISES Performance tests IE 60079-29-1:2016* IE 60079-29-1:2007* (withdrawn) SA-22.2 No.152-M1984** SA-22.2 No.60079-29-1:2012** SA-22.2 No. 60079-29-1:2017** ANSI/ISA-12.13.01:2000*** ANSI/ISA-12.13.01:2002* ANSI/ISA-12.13.01:2013* Test Methods and performance requirements Specification for carbon monoxide detectors (electrical) for domestic use Performance tests BS EN 50194-1:2009* Performance tests BS EN 50291-1:2010* Assessment Manager: AS1 Page 11 of 13
2 Pine Trees, her t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, UK ISO/IE 17025:2005 SA Group Testing UK Ltd ode ELETRIAL APPARATUS FOR THE DETETION AND MEASUREMENT OF OXYGEN Performance tests BS EN 50104:2010* Test Methods and performance requirements ELETRIAL APPARATUS USED FOR THE DIRET DETETION AND DIRET ONENTRATION MEASUREMENT OF TOXI GASES AND VAPOURS Part 1: General requirements and test methods Part 2: Performance requirements for apparatus used for exposure s Part 3: Performance requirements for apparatus used for general gas detection For the following types of detector:- arbon Monoxide, O arbon Dioxide, O2 Hydrogen Sulphide, H2S Performance tests EN 45544-1:2015* Performance tests EN 45544-2:2015* Performance tests EN 45544-3:2015* Assessment Manager: AS1 Page 12 of 13
2 Pine Trees, her t s ey L an e, Stai nes - u po n - T ham es, TW 18 3HR, UK ISO/IE 17025:2005 SA Group Testing UK Ltd ode Note 1 * Excluding tests concerned with: i) Electromagnetic compatibility; ii) Explosion protection; iii) Alarm and sound level; iv) Electrical safety; v) Degree of mechanical strength and protection; vi) Battery connections vii) Software evaluation viii) vibration ** Excluding tests concerned with: i)bounce and vibration. ***Excluding tests concerned with: i) Air velocity ii) Power supply interruptions, voltage transients and step changes in voltage In the above section 3, where IE or EN standards have exact equivalents in BS, EN or BS EN Standards, these BS, EN or BS EN standards are also included in the accreditation. END Assessment Manager: AS1 Page 13 of 13