REMKO Comfort-WP The versatile heat pump Issue 2012 Independent from oil and gas Cosy heat in the winter A pleasant climate in the summer CMF Series 1-2014 Quality with systems
REMKO THE CUSTOMER-ORIENTED SYSTEM PROVIDER FOR THE WHOLE YEAR Quality with systems AIR-CONDITIONING HEATING NEW ENERGIES Air-conditioners Local air-conditioners Comfort air-conditioners Hot air heating systems Mobile hot air heating systems Stationary hot air heating systems Heat pump systems Heat pumps Heat pump packages Chilled water systems Chillers Dehumidifiers Mobile dehumidifiers Pool dehumidifiers 2
Product overview Comfort-WP Page Series 4-7 Inverter heat pumps 5 Heat pump manager 6-7 Technical data CMF 8-17 Heat pump packages 8-17 Heat pump packages CMF 18-19 Tank systems 20-23 Accessories TÜV-inspected heat pumps with EHPA quality seal of approval The REMKO inverter heat pumps are listed by the European Heat Pump Association (EHPA formerly D-A-CH) in its seal of approval list! REMKO s inverter heat pumps thus fulfil high international standards and guarantee performance numbers you can count on! 3
INVERTER HEAT PUMPS Cosy heat in the winter A pleasant climate in the summer Indoor unit in wall-mounted design CMF series Atmospheric conditions are becoming ever more extreme Winters are getting warmer and summers hotter. Temperatures of over +30 C are no longer uncommon in summer. This means that in addition to heating, cooling is taking on an ever more important role. One more reason to install a REMKO inverter heat pump. In winter, the heat pump operates as an efficient heating system, in summer, the water-bearing system ensures comfortable air conditioning. Inverter heat pumps with EHPA quality seal of approval It couldn't be simpler. Everything complete in an indoor unit Everything is installed in a single housing: circulation pump, various valves and fittings and the heat pump manager. The CMT device series is additionally equipped with a buffer tank and electrical booster heating (9 kw) in the standard version. Free choice when installing the outdoor units You save a lot of space when installing the outdoor units externally. You can use the basement space for other purposes such as a party room or sauna. Outdoor installation is ideal for buildings without a basement. External units of the CMF series 4
THE HEAT PUMP MANAGER The multitalent of the inverter heat pumps The complete energy management system The heat pump manager handles the complete energy management of the inverter heat pump. The controller has everything perfectly under control. No matter whether it is dealing with the control of an individual unit, an entire system or the management of a complex plant. The REMKO heat pump manager is a multitalent. The multitalented PLUS design includes a heat meter for optional official subsidies claims according to the market incentive programme of the German federal government according to EEWärmeG (Renewable Energy Heat Act). Activation of the cooling function Integrated solar control Anti-legionella system Modular design Control of water treatment Connection of several external heating appliances possible Dialogue guided Remote control connection option Ready for power plant operator connection Load-dependent control, according to demand 5
INVERTER HEAT PUMPS CMF Series Save costs with modern inverter technology This pioneering inverter technology automatically adapts the condenser speed variably and precisely to the cooling or heating requirement. This exact and gentle regulation enables a particularly energy saving, efficient operation with a high seasonal performance factor in comparison to non-inverter systems. Modern inverter technology Heating, cooling and preparation for domestic water Outdoor air energy source, operational down to -18 C Hot water heating up to +60 C (device-specific) High efficiency circulation pump Fully-automatic, quiet and low-maintenance operation High operating safety Low installation effort Floor-area optimised design Load-dependent control, according to demand Inverter heat pumps with EHPA quality seal of approval External units of the CMF series 6
Technical data Series CMF 85 CMF 120 CMF 180 CMF 180 Duo Design Single split Single split Single split Duo Split Operating mode Heating/Cooling Heating/Cooling Heating/Cooling Heating/Cooling Testing TÜV EHPA EHPA EHPA Inverter technology Series Series Series Series System Air/Water Air/Water Air/Water Air/Water Buffer tank for hydraulic decoupling of volumetric flows optional optional optional optional Electric booster-heating, max. 9 kw series optional optional optional Preparation for domestic water optional optional optional optional Emergency heating control series optional optional optional Heating capacity min. / max. kw 1.1-10.2 3.5-11.0 3.1-17.7 6.2-35.4 Heating capacity / COP for A2/W35/Hz 1) kw / - /Hz 4.9/3.3/57 1) 7.2/3.4/96 1) 9.4/3.4/57 1) 18.8/3.4/57 1) Heating capacity / COP for A-7/W35/Hz 1) kw / - /Hz 4.4/2.8/57 1) 4.8/2.5/99 1) 8.0/2.7/57 1) 16.0/2.7/57 1) Heating capacity / COP for A7/W35/Hz 1) kw / - /Hz 8.1/4.4/57 1) 10.0/4.3/96 1) 14.2/4.6/57 1) 28.4/4.6/57 1) Heating capacity / COP for A10/W35/Hz kw / -/Hz 8.7/4.7/57 1) 10.5/4.4/99 1) 15.9/4.9/57 31.8/4.9/57 Cooling capacity min. / max. kw 1.6/12.2 3.3/8.1 2.8/15.0 5.6/30.0 Cooling capacity for A35/W7 kw / EER 2) / Hz 6.2/3.5/74 5.4/2.9/70 10.3/3.01/57 20.6/3.01/57 Cooling capacity for A27/W7 kw / EER 2) / Hz 6.4/3.9/74 5.9/3.5/70 11.9/3.99/57 23.8/3.99/57 Service limits, heating C -18 to +45-18 to +45-18 to +45-18 to +45 Service limits, cooling C +15 to +45 +15 to 46 +15 to +45 +15 to +45 Supply-temperature, heating water C + 50 + 60 + 55 + 55 Refrigerant R 410A R 410A R 410A R 410A Refrigerant, basic capacity kg 1.9 3.5 2.85 2x2.85 Refrigerant connections Inch 1/4 / 5/8 3/8 / 5/8 3/8 / 5/8 2 x 3/8 / 5/8 Max. refrigerant line length m 50 50 75 75 Refrigerant line height, max. m 30 30 30 30 Voltage supply V/Hz 230/1~/50 230V/1~/50 400/3~/50 230/3~/50 Rated power consumption for A7/W35 kw 1.84 2.32 3.10 2x3.10 Rated power consumption for A7/W35 A 13 13 4.83 2x4.83 Customer's fuse protection (outdoor unit) A slow-acting 20 25 3x16 6x16 Nominal volume flow rate of water at t 5 K m³/h 1.38 1.7 2.4 2x2.40 Max. operating pressure, water bar 3.0 3.0 3.0 3.0 Hydraulic connection, supply/return line Inch 1" AG 1" AG 1" AG 1/4" AG Sound-pressure level, LpA 1m (outdoor unit) open air db(a) 54/40 3) 53/39 3) 56/42 3) 3) 4) 56/42 Outdoor unit, standard colour grey white grey grey Dimensions indoor unit height/width/depth mm 800/550/550 800/550/550 800/550/550 800/550/550 Dimensions outdoor unit height/width/depth mm 800/880/310 945/950/330 1420/940/330 1420/940/330 Weight indoor unit/outdoor unit kg 47/57 52/75 52/100 72/2 x 100 Inverter heat pump CMF 85 CMF 120 CMF 180 CMF 180 Duo consisting of: Outdoor and indoor units, safety group with SIV, bleeder and manometer, 2x shut-off valves 1" with thermometer, dirt filter 1", feed valve and drain valve 1/2", immersion, contact and outdoor probes, without heat pump manager Ref. no. 253050 250050 253060 251020 serial colour of outdoor unit: silver Ref. no. 253052 250052 253062 251022 Heat pump manager Multitalent The complete controller for your heating system, factory-installed Ref. no. 245110 245110 245110 245111 Heat pump manager Multitalent PLUS Same design as Multitalent plus a heat meter, factory installed Ref. no. 245210 245210 245210 245211 1) COP = coefficient of performance in accordance with EN 14511, TÜV tested 4) Specification per outdoor unit 2) EER = Energy efficiency ratio in accordance with EN 14511 3) Distance 5m 7
HEAT PUMP PACKAGES Type Cologne Heat pump package - Type Cologne for CMF 85-180 device series This heat pump package is designed for users who want heating first and foremost. A cooling function for the summer can also be activated, if necessary. Preparation for domestic water takes place separately. With this heat pump package, both bivalent and monoenergetic systems can be accommodated. Accessories include: Condensate drip tray including oil separator for outdoor unit Buffer tank for cooling and hot water KPS 300 (300 l) 8
Hydraulic system (example for monoenergetic operating mode) Heating circuit 1 Heating circuit 2 Cooling circuit Indoor unit Outdoor unit Heating Panel heating Cooling Technical data Heat pump package, Type Cologne CMF 85 CMF 120 CMF 180 Heating capacity min. / max. kw 1.1-10.2 3.5-11.0 3.1-17.7 Cooling capacity min / max kw 1.6-12.2 3.3-8.1 2.8-15.0 Package comprising: Indoor and outdoor unit (standard colour), buffer tank for cooling and hot water KPS 300 (300 litre), condensate drip tray incl. oil separator for outdoor unit, heat pump manager factory installed With heat pump manager Multitalent Ref. no. 286100 285800 286110 With multi-talented heat pump manager PLUS Ref. no. 286105 285805 286115 9
HEAT PUMP PACKAGES Type Dortmund Heat pump package - Type Dortmund for CMF 85-180 device series This heat pump package is for users who, in addition to the heating function, also want drinking water treatment from their heat pump system. A cooling function for the summer can also be activated, if necessary. In this package the preparation for domestic water takes place in an enamelled 300 litre high-performance tank. With this heat pump package, both bivalent and single energy source systems can be accommodated. Accessories include: 3-way switching valve, DN 25 Condensate drip tray incl. oil separator for outdoor unit Buffer tank for cooling and hot water KPS 300 (300 l) Tank for domestic water heating, enamelled EWS 300 (300 litres) 10
Hydraulic system (example for monoenergetic operating mode) Heating circuit 1 Heating circuit 2 Cooling circuit Indoor unit Outdoor unit Hot water Chilled water Heating Panel heating Hot water Cooling Technical data Heat pump package, Type Dortmund CMF 85 CMF 120 CMF 180 Heating capacity min. / max. kw 1.1-10.2 3.5-11.0 3.1-17.7 Cooling capacity min / max kw 1.6-12.2 3.3-8.1 2.8-15.0 Package comprising: Indoor and outdoor unit (standard colour), buffer tank for cooling and domestic hot water KPS 300 (300 litre), buffer tank for drinking water, enamelled EWS 300 (300 litre), 3-way switching valve, condensate drip tray, incl. oil separatorfor outdoor unit, heat pump manager factory installed With heat pump manager Multitalent EDP no. 286140 286150 286170 With multi-talented heat pump manager PLUS EDP no. 286145 286155 286175 11
HEAT PUMP PACKAGES Type Frankfurt Heat pump package - Type Frankfurt for CMF 85-180 device series The energy-saving package is prepared for the integration of solar thermal systems or solid fuel boilers. With the fin-tube heat exchanger (special accessory) RWT31, collector surfaces from approximately 8 to 15 m² can be connected. The preparation for domestic water takes place with an 800 litre or 1000 litre buffer tank and fresh water station in the hygienic flow process. With this heat pump package, both bivalent and single energy source systems can be accommodated. Accessories include: 2 x 3-way switching valve, DN 25 Immersion and solar probe Condensate drip tray incl. oil separator for outdoor unit Multifunction buffer tank MPS 800 (800 litres) or MPS 1000 (1000 litres) For connection sets, see p.22 Fresh water station EFS 25, complete with pump and flow switch 12
Hydraulic system (Example for monoenergetic operating mode for on-site integration of a solar system or a solid fuel boiler) Indoor unit Chilled water Hot water Heating circuit Outdoor unit or or Heating or panel heating Hot water Solar connection or solid fuel boiler Technical data Heat pump package, Type Frankfurt CMF 85 CMF 120 CMF 180 Heating capacity min. / max. kw 1.1-10.2 3.5-11.0 3.1-17.7 Cooling capacity min / max kw 1.6-12.2 3.3-8.1 2.8-15.0 Package comprising: Indoor and outdoor unit (standard colour), multifunction buffer tank MPS 800 (800 litre) or MPS 1000 (1000 litre), fresh water station EFS 25, 2x3-way switching valve, immersion and solar probe, condensate drip tray, incl. oil separator for outdoor unit, heat pump manager factory installed. The fin-tube heat exchanger must be ordered separately. With heat pump manager Multitalent, MPS 800 Ref. no. 286180 286200 286220 With multi-talented heat pump manager PLUS, MPS 800 Ref. no. 286185 286205 286225 With heat pump manager Multitalent, MPS 1000 Ref. no. 286190 285840 286230 With multi-talented heat pump manager PLUS, MPS 1000 Ref. no. 286195 285845 286235 13
HEAT PUMP PACKAGES Type Cologne Duo Heat pump package - Type Cologne Duo for CMF 180 Duo device series This heat pump package is designed for users who want heating first and foremost. A cooling function for the summer can also be activated, if necessary. Preparation for domestic water takes place separately. With this heat pump package, both bivalent and monoenergetic source systems can be accommodated. Accessories include: 2 x condensate drip trays including oil separator for outdoor unit Buffer tank for cooling and hot water KPS 300 (300 l) 14
Hydraulic system (example for monoenergetic operating mode) Heating circuit 1 Heating circuit 2 Cooling circuit Indoor unit Outdoor unit Outdoor unit Heating Panel heating Cooling Technical data Heat pump package - Type Cologne Duo CMF 180 Duo Heating capacity min. / max. kw 6.2-35.4 Cooling capacity min / max kw 5.6-30.0 Package comprising: Indoor unit and 2x outdoor units (standard colour), buffer tank for cooling and hot water KPS 300 (300 litre), 2x condensate drip tray, incl. oil separator for outdoor unit, heat pump manager factory installed With heat pump manager Multitalent Ref. no. 286260 With multi-talented heat pump manager PLUS Ref. no. 286265 15
HEAT PUMP PACKAGES Type Frankfurt Duo Heat pump package - Type Frankfurt Duo for CMF 180 Duo unit series The energy-saving package is prepared for the integration of solar thermal systems or a solid fuel boiler. With the fin-tube heat exchanger (special accessory) RWT31, collector surfaces from approximately 8 to 15 m² can be connected. The preparation for domestic water takes place with an 800 litre or 1000 litre buffer tank and fresh water station in the hygienic flow process. With this heat pump package, both bivalent and single energy source systems can be accommodated. Accessories include: 2 x 3-way switching valve, DN 40 Immersion and solar probe Condensate drip tray incl. oil separator for outdoor unit For connection sets, see p.22 Fresh water station EFS 25, complete with pump and flow switch Multi-functional buffer tank MPS 800 (800 l) or MPS 1000 (1000 l) 16
Hydraulic diagram (Example for monoenergetic operating mode for on-site integration of a solar system or a solid fuel boiler) Chilled water Hot water Heating circuit Indoor unit Outdoor unit Outdoor unit or Heating Hot water Solar connection or solid fuel boiler Technical data Heat pump package - Type Frankfurt Duo CMF 180 Duo Heating capacity min. / max. kw 6.2-35.4 Cooling capacity min / max kw 5.6-30.0 Package comprising: Indoor unit and 2x outdoor units (standard colour), multifunctionl buffer tank MPS 800 (800 litre) or MPS 1000 (1000 litre), fresh water station EFS 25, 2x3-way switching valve, immersion and solar probe, 2x condensate drip trays, incl. oil separator for outdoor unit, heat pump manager factory installed. The fin-tube heat exchanger must be ordered separately. With heat pump manager Multitalent, MPS 800 Ref. no. 286280 With multi-talented heat pump manager PLUS, MPS 800 Ref. no. 286285 With heat pump manager Multitalent, MPS 1000 Ref. no. 286290 With heat pump manager Multitalent PLUS, MPS 1000 Ref. no. 286295 17
TANK SYSTEMS Heating water buffer tank UP TO 38% ENERGY SAVINGS DUE TO FLEECE INSULATION Universally usable as parallel buffer (hydraulic switch) or serial buffer With dummy flange cover D240 for retrofitting a fin-tube heat exchanger RWT 31 Electrical immersion heating element, screw-in 6/4" Max. operating temperature 95 C Max. operating pressure 3 bar External anti-rust coating 9 connection threads (11 for MPS1000/MPS800) 6/4" IG with inflow restrictors 4 socket screw threads 1/2" for sensor/thermometer immersion sleeves From quality steel S235 according to DIN EN 10 025/10 111 High-efficiency, double-shell heat insulation, 100 mm, silver grey Test pressure 4,5 bar Unit type HPS 500 MPS 800 MPS 1000 Storage type Buffer tank Stratified storage Height with insulation mm 1725 1785 2135 Diameter with insulation mm 850 990 990 Diameter without insulation mm 650 790 790 Tilt height without insulation mm 1670 1750 2090 Weight kg 113 157 176 Ref. no. 270300 270380 270400 Hot / cooling water buffer tank Universally usable as parallel buffer (hydraulic switch) or serial buffer With cleaning flange cover D180 for retrofitting Fin-tube heat exchanger RWT 18, can be retrofitted Electrical immersion heating element, screw-in 6/4" 4 connecting threads AG 5/4" Powder-coated steel sheet outer casing in silver-grey Outer casing reinforced by beading High-quality PUR insulation 50 mm (CFC, HCFC and HFC-free), water vapour diffusion tight Sensor conduct for variable sensor positioning Operating temperature: min. 0 C, max. 95 C Max. operating pressure 3 bar Steel sheet inner boiler S235 according to DIN EN 10 025/10 111 Unit type KPS 300 Height with insulation mm 1797 Diameter mm 600 Tilt height without insulation mm 1835 Weight kg 125 Ref. no. 270250 18
Buffer tank for domestic water heating Enamelled with doublecoiled smooth-tube heat exchanger and particularly large heat exchanger surface of 3.5 m² Inner container with magnesium protection anodes according to DIN 4753 Max. operating temperature 95 C Connection possibilities for circulation 3/4" AG Chilled water supply and hot water outlet 1" IG With cleaning flange cover D180 Built-in flange heating (legionella protection) or fin-tube heat exchanger RWT 18, can be retrofitted PUR insulation 50 mm (CFC, HCFC and HFC-free) The silver-grey lining is delivered separately for transport protection purposes Max. operating pressure 10 bar Unit type EWS 300 Height mm 1435 Diameter mm 680 Tilt height mm 1595 Weight kg 170 Ref. no. 270100 BUFFER TANK SYSTEM - ACCESSORIES Fin-tube heat exchanger For additional indirect heating, e.g. with a solar thermal system Manufactured from seamless, helically-wound SF-CU fin-tube RWT 31 also with immersion sleeve for sensor Complete with screw connection on enamelled flange plate Max.operating temperature 95 C Max. operating pressure 10 bar Unit type RWT 18 RWT 31 Suitable for buffer tanks Type EWS 300 KPS 300 Heat exchanger surface m² 1.40 3.10 Installation length in mm 440 530 Connection G Inch 3/4 1 Volume l 1.50 2.50 HPS 500 MPS 800 MPS 1000 Flange Ø 180 / 8-hole 240 / 12-hole Ref. no. 260200 260210 19
THE FINELY-MATCHED ACCESSORY RANGE FOR INVERTER HEAT PUMPS Outdoor unit Connecting line between outdoor and indoor unit for CMF/CMT 85, 120, 3 5 8 8 " Ø 160, 180, 180 Duo Ref. no. 260010 Floor bracket Floor bracket with vibration dampers for outdoor unit, length 1 m CMF/CMT 85-180, 180 Duo Ref. no. 260020 Wall bracket set for the wall mounting of the outdoor unit For unit type Type Ref. no. CMF85, CMT85 WKM560 260085 CMF120, CMT120 WKM560 260085 CMF160, CMT160 WKM560+ 260078 CMF180, CMT180 WKM560+ 260078 CMF180 Duo (2x) WKM560+ 260078 Sound insulation set 1613900 Electrical condensation drainage - heating Electrical condensate drainage heating, temperature-regulated for the safe discharge of defrost water with outside temperatures below the freezing point Ref. no. 260045 Condensate drip tray including oil separator Stainless steel condensate drip tray for outdoor unit incl. temperature-controlled electronic condensate drainage heating, leaf guard grating, and oil separator. Ref. no. 260125 20
Heat pump manager Multitalent Receiver Transmitter Remote control for heat pump manager Multitalent For connection to the heat pump manager integrated into the heat pump. The remote control contains an LCD display with identical menu guidance. 4 wire CAN-BUS connection. A heating circuit can be controlled with remote control operation Ref. no. 260105 Remote control for heat pump manager Multitalent For connection to the heat pump manager integrated into the heat pump. The remote control contains an LCD display with identical menu guidance. A heating circuit can be controlled with remote control operation. Not suitable for cooling function Ref. no. 260110 Analogue remote control with integrated room sensor For connection to the heat pump manager integrated into the heat pump. The operating mode and the set temperature for heating circuit 1 can be controlled with two easy-to-operate rotary knobs (direct heating circuit) Ref. no. 260130 Indoor unit/storage systems Electric booster heating 9 kw - set incl. emergency heating switch for inverter heat pump Electric booster heating 2" for installation into indoor unit for monoenergetic source operation. An integrated emergency heating switch ensures additional operational safety. Including temperature regulator and safety temperature limiter. Connectable heating capacity: 3, 6 or 9 kw Ref. no. 260065 Electric booster heating 6 kw for buffer tank Electric booster heating 6/4" for installation in a buffer tank. Including temperature regulator and safety temperature limiter. 2, 4 or 6 kw can be optionally connected Ref. no. 260063 Built-in flange heating for EWS 300 Consisting of a high-quality tubular heating element on which an insulated flange plate is fitted. A protective earthing resistor, thermal probe and safety temperature limiter. Max. operating pressure 10 bar. Heating capacity 6 kw Ref. no. 260160 21
FRESH WATER SYSTEMS Electronically controlled fresh water stations EFS series The fresh water stations of REMKO are used for hygienic preparation for domestic water in connection with buffer tanks. The devices are completely equipped with electronic control, speed-controlled high-efficiency pump, flow switch and plate heat exchanger. The heat exchanger is designed for a high flow rate of 25 l/min (EFS25) or 35 l/min (EFS35). The fresh water stations are delivered ready for mounting in the EPP housing. In the case of the EFS 35, the device is mounted to the wall. The EFS 25 fresh water station permits mounting directly on the tank or wall. Technical data Fresh water station EFS 25 EFS 35 Tapping output kw 30 1) 79 2) Installation site Tank/Wall Wall Heat pump type CMF 85, 120, 180, 180 DUO 180, 180 DUO Min. buffer volume for hot water operation 500 L 800 L Primary connections IG Inch 3/4 1 1/2 Secondary connections AG Inch 3/4 1 Dimensions - height/width/depth mm 645/348/249 795/602/298 Tap volume at 45 C tap temperature and 50 C tank temperature l/min 12 21 Tap volume at 45 C tap temperature and 60 C tank temperature l/min 20 32 Tap volume at 45 C tap temperature and 70 C tank temperature l/min 26 40 Series EFS 25 EFS 35 Ref. no. 260155 260156 1) Tapping output at 50 C buffer temperature / 12 l/min / 10 C cold water supply line 2) Tapping output at 50 C buffer temperature / 32 l/min / 10 C chilled water supply line Accessories Other accessories EFS 25 EFS 35 Circulation pump EFS 25 Controllable high-efficiency circulation pump including pipe subassembly for direct connection to EFS 25 259052 Circulation pump EFS 35 Speed-controlled high-efficiency circulation pump for installation directly to the fresh water station EFS 35 259053 Single-layer return valve for temperature-dependent layering in the buffer tank 260072 260072 Accessories Return layering set RES for EFS 25 for connection to the buffer tank RES including tank connection pipes and 3-way switching valve for temperature-dependent layering in the buffer tank. Note: Not suited for EFS 35 For buffer tank Ref. no. MPS 800 259031 MPS 1000 259032 Tank connection set for buffer tanks For the direct connection of the fresh water station EFS 25 to the buffer tank. Note: Not suited for EFS 35 For buffer tank Ref. no. HPS 500 259040 MPS 800 259041 MPS 1000 259042 22
ACCESSORIES INVERTER HEAT PUMPS Hydraulics Contact sensor Contact sensor for integration of additional system components, e.g. mixing circuit (heating circuit 2). By standard, an immersion probe is included in the scope of supply of the heat pump Ref. no. 260100 Solar sensor Solar probe for the collector supply for integration of a solar thermal system (Pt 1000) or usable as a sensor for a solid fuel boiler Ref. no. 260102 Immersion probe Immersion probe for the integration of additional system components, e.g. as a reference probe in the multi-functional buffer in combination with a solar thermal system. By standard, 1 immersion probe is included in the scope of supply of the heat pump Ref. no. 260090 4-way switching valve, DN 32 Electric switching valve / 4-way valve 1 1/4" for integration of a second heat generator in bivalent operation (only for CMF) Ref. no. 260071 3-way changeover valve, 5/4" Electrical switchover valve/3-way valve 5/4" for preparation of domestic water, separate cooling circuit (four-tube system), and return layering in the case of the fresh water station Ref. no. 260072 3-way changeover valve, 6/4" Electrical switchover valve3-way valve 6/4" for preparation of domestic water and separate cooling circuit (four-tube system) for CMF 180 DUO Ref. no. 259055 KWD-S series KWK-4R series WLT-S series Overflow protection valve Overflow protection valve 1" for ensuring that the minimum medium flow rate is maintained Ref. no. 260080 Pleasant climate in the summer All information about our ceiling-mounted and wall-mounted chests can be found online under www.remko.de. 23
REMKO INTERNATIONAL...and somewhere near you! Take advantage of our experience and consulting services REMKO GmbH & Co. KG Air-conditioning and Heating Technology Im Seelenkamp 12 32791 Lage PO Box 1827 32777 Lage Telephone Fax E-mail URL REMKO dealers +49-5232-606-0 +49-5232-606-260 info@remko.de www.remko.de Hotline Within Germany 05232-606-0 International +49-5232-606-130 MS/RI/0/7.13 We reserve the right to make technical modifications. Information provided without guarantee!