Concepts Products Service DryMode Simply install tiles dry 1
Building new solutions. Lindner undertakes major projects worldwide in all areas of interior fit-out, insulation technology, industrial services and building facades. From pre-planning through to project completion Lindner is your partner of choice. The Company s extensive manufacturing capability enables quality to be strictly maintained whilst allowing maximum flexibility to meet individual project requirements. Environmental considerations are fundamental to all Lindner s business principles. Through partnerships with clients Lindner turns concepts into reality. Choosing Lindner you have: Lindner Concepts: Tailored solutions specifically geared to satisfy individual project requirements Lindner Products: Quality materials and systems to the very highest industry standards Lindner Service: Comprehensive project management services 2
Main photo: ADAC Zentrale München Xaver Lockau DryMode Dry design and installation: the best way to achieve the perfect result DryMode changes the current frame conditions for stone covering works and enables an up to 50 % faster and dust-free laying of the tiles with its new technology. Further advantages are an automatic alignment of the joint pattern as well as a continuous and effective decoupling from the substrate without using any primer and adhesive! DryMode is especially developed for optimizing the installation of ceramic floors. For this purpose, a decoupling layer made of cork is connected to a ceramic tile of every size in order to create a precisely processed dry tile which can immediately be installed without further preparation on a level substrate, ideally on FLOOR and more hollow floors. Your advantages at first sight - Secure planning with design freedom - Significant reduction of the construction period - Dry installation of large format tiles - No use of primer and adhesive - Ergonomic and dust-free working - Easy replacement of tiles - Covering completely removable 3
Contents Advantages 5 Application and technology 6 Overview of technical characteristics of DryMode 9 Product lines Ardesa 11 Attuale 13 Braveheart 15 Casa 17 Definita 19 Dimessa 21 Giura 23 Marmo 25 Pari 27 Rena 29 Tenero 31 Travertino 33 4
Advantages For architects & designers Secure planning with design freedom With DryMode, floor covering works are considerably easier to plan in terms of result and process. The surface is already loadable one day after the dry installation of the tiles. Dry installation of large format tiles The DryMode technology is the perfect method to install large format floor tiles on a level substrate such as FLOOR and more. Neither a particular preparation of the ground nor further priming are necessary for its installation. In addition, there is no need of additional decoupling mats. For craftsmen For owners & tenants Significant reduction of the construction time DryMode is a dry installation system shortening the laying time by up to 50 % compared with the conventional floor tile installation method. Covering completely removable The tiles can be removed quickly and easily, free of residues and with little dust formation in situations of relocation, change of tenants or change of use - without damaging the substrate. Easy replacement of tiles Once a single tile has been damaged it can be replaced within minutes without any drying time. Simply expose and remove the damaged tile, install a new tile and grout it. Ergonomic and dust-free working The DryMode installation technology with its prefabricated tiles automatically forms an accurate 3 mm wide joint pattern thanks to the surrounding cork edge. Therefore, the installation can be carried out a lot more ergonomically and faster without producing dust and humidity. No use of primer and adhesive DryMode does not need any adhesive and primer in order to achieve a step-safe result. The tiles are only grouted. 5
Application and technology Levelness The floor system FLOOR and more offers the best conditions for DryMode as it is installed exactly on height on its adjustable steel pedestals. Determination of the joint grid Every usual joint grid is possible with the DryMode installation technology. A system joint with a width of 3 mm is automatically formed by tightly joining together the cork edges. 6
Grouting of the tiles The installed DryMode tiles are grouted with a cement-based grouting compound. The surface is accessible after 12 to 24 hours (final hardness after four to five days). Applicable everywhere Office and administration buildings, store and exhibition stand construction, museums, exhibition rooms, schools, kindergartens, retirement homes, hotels, atria and shopping malls. 7
8
2 1 3 1 2 3 Ceramic tile from the DryMode collection Decoupling layer with 1.5 mm cork frame sintered to the bottom side of the ceramic tile System joint with a width of 3 mm, automatically created by the surrounding cork edge Overview of technical characteristics of DryMode - Acoustic and constructive decoupling from the substrate (impact sound improvement of 13 to 18 db) - Walking-elastic bedding of the tiles with the patented decoupling backing - Emission and dust-free installation in favor of a clean ambient air - Ergonomic and low-risk installation of large format tiles - Removable at any time in case of a change in use or a subsequent installation 9
10
Ardesa bianco brizzolata bronzo Tested quality Panel thickness approx. 12.5 mm with a 60 x 60 cm format Water absorption max. 0.1 % ISO 10545.3 Abrasion Class 5 Chemical resistance GA UNI EN ISO 10545.13 5 UNI EN ISO 10545.14 Fire resistance class B fl -s1 EN 13501 Impact sound improvement up to 18 db Recycled content up to 40 % Slip resistance dry wet R12 - DIN 51130 - A+B DIN 51097 0.91 0.69 ASTM C1028 0.81 0.62 BCRA 11
12
Attuale bianco crema argenteria grigio antracite nero Tested quality Panel thickness approx. 12.5 mm with a 60.8 x 60.8 cm format Water absorption max. 0.1 % ISO 10545.3 Abrasion Class 5 Chemical resistance GA UNI EN ISO 10545.13 5 UNI EN ISO 10545.14 Fire resistance class B fl -s1 EN 13501 Impact sound improvement up to 18 db Recycled content up to 40 % Slip resistance dry wet R12 - DIN 51130 - A+B DIN 51097 0.91 0.69 ASTM C1028 0.81 0.62 BCRA 13
14
Braveheart gypsum pearl grey earh coke Tested quality Panel thickness approx. 12.5 mm with a 60 x 60 cm format Water absorption max. 0.1 % ISO 10545-3 Chemical resistance GA UNI EN ISO 10545.13 5 UNI EN ISO 10545.14 Fire resistance class B fl -s1 EN 13501 Recycled content up to 40 % Slip resistance dry wet R10 - DIN 51130 Abrasion Class 5 Impact sound improvement up to 18 db 15
16
Casa avorio brizzolata bruno nero Tested quality Panel thickness approx. 12.0 mm with a 60 x 60 cm format Water absorption max. 0.1 % ISO 10545.3 Chemical resistance GA UNI EN ISO 10545.13 5 UNI EN ISO 10545.14 Fire resistance class B fl -s1 EN 13501 Recycled content up to 40 % Slip resistance dry wet R9 - DIN 51130 Abrasion Class 4 Impact sound improvement up to 18 db 17
18
Definita crema aureo brizzolata grigio bruno marrone antracite nero Tested quality Panel thickness approx. 12.5 mm with a 60 x 60 cm format Water absorption max. 0.5 % ISO 10545.3 Chemical resistance UA UNI EN ISO 10545.13 5 UNI EN ISO 10545.14 Fire resistance class B fl -s1 EN 13501 Recycled content up to 40 % Slip resistance dry wet R10 - DIN 51130 Abrasion Class 6 Impact sound improvement up to 18 db 19
20
Dimessa bianco grigio crema ocra bruno antracite marrone nero Tested quality Panel thickness approx. 13.0 mm with a 60 x 60 cm format Water absorption max. 0.5 % ISO 10545.3 Chemical resistance min. UB UNI EN ISO 10545.13 min. 3 UNI EN ISO 10545.14 Fire resistance class B fl -s1 EN 13501 Recycled content up to 40 % Slip resistance dry wet R9 - DIN 51130 Abrasion Class 6 Impact sound improvement up to 18 db 21
22
Giura Tested quality Panel thickness approx. 13.0 mm with a 50 x 50 cm format Water absorption max. 0.5 % ISO 10545.3 Chemical resistance GA UNI EN ISO 10545.13 5 UNI EN ISO 10545.14 Fire resistance class B fl -s1 EN 13501 Recycled content up to 40 % Slip resistance dry wet R9 - DIN 51130 Abrasion Class 5 Impact sound improvement up to 18 db 23
24
Marmo Tested quality Panel thickness approx. 13.0 mm with a 50 x 50 cm format Water absorption max. 0.5 % ISO 10545.3 Chemical resistance GA UNI EN ISO 10545.13 5 UNI EN ISO 10545.14 Fire resistance class B fl -s1 EN 13501 Recycled content up to 40 % Slip resistance dry wet R9 - DIN 51130 Abrasion Class 5 Impact sound improvement up to 18 db 25
26
Pari crema noce grigio antracite Tested quality Panel thickness approx. 13.0 mm with a 60 x 60 cm format Water absorption max. 0.5 % ISO 10545.3 Chemical resistance UA UNI EN ISO 10545.13 ULC UNI EN ISO 10545.13 UHC UNI EN ISO 10545.13 Fire resistance class B fl -s1 EN 13501 Recycled content up to 40 % Slip resistance dry wet R10 - DIN 51130 Abrasion Class 6 Impact sound improvement up to 18 db 27
28
Rena avorio aureo grigio ocra bruno Tested quality Panel thickness approx. 12.5 mm with a 60 x 60 cm format Water absorption max. 0.1 % ISO 10545.3 Chemical resistance GA UNI EN ISO 10545.13 5 UNI EN ISO 10545.14 Fire resistance class B fl -s1 EN 13501 Recycled content up to 40 % Slip resistance dry wet R9 - DIN 51130 Abrasion Class 5 Impact sound improvement up to 18 db 29
30
Tenero bianco crema bruno antracite marrone nero Tested quality Panel thickness approx. 13.0 mm with a 60 x 60 cm format Water absorption max. 0.5 % ISO 10545.3 Chemical resistance GA UNI EN ISO 10545.13 4 UNI EN ISO 10545.14 Fire resistance class B fl -s1 EN 13501 Recycled content up to 40 % Slip resistance dry wet R9 - DIN 51130 Abrasion Class 4 Impact sound improvement up to 18 db 31
32
Travertino Tested quality Panel thickness approx. 12.5 mm with a 60 x 60 cm format Water absorption max. 0.5 % ISO 10545.3 Chemical resistance GA UNI EN ISO 10545.13 5 UNI EN ISO 10545.14 Fire resistance class B fl -s1 EN 13501 Recycled content up to 40 % Slip resistance dry wet R10 - DIN 51130 Abrasion Class 4 Impact sound improvement up to 18 db 33
TU_B_DRY/E/1.0 We can do it all for you. Lindner Concepts: - Airports and Railways - Clean Rooms and Operating Theatres - Cruise Liner and Ship Fit-out - General Contracting - Hotels and Resorts - Insulation and Industrial Service - Interior Fit-out and Furnishings - Special-Purpose Constructions and Stadiums - Studios and Concert Halls - System Buildings Lindner Products: - Ceiling Systems - Doors - Dry Lining Systems - Facades - Floor Systems - Heating and Cooling Technologies - Lights and Lighting Systems - Partition Systems - Roofing Systems - Steel & Glass Lindner Service: - Clearance of Harmful Substances - Construction Management and Project Development - Deconstruction and Interior Demolition - General Planning - Global Product Supplies - Green Building - Industrial Scaffolding - Installation and Building Services - Research and Development Lindner Group Bahnhofstrasse 29 94424 Arnstorf Germany Phone +49 8723 20-3682 Fax +49 8723 20-2830 floorsystems@lindner-group.com www.lindner-group.com This document is the intellectual property of Lindner, Arnstorf (Germany). All the information contained in this brochure agrees with the information available at the time of its printing and only serves as advance information. Any possible colour deviations there might be from the original product are caused by printing-related reasons. Lindner is the sole and exclusive owner of the copyrights as well as the ancillary copyright. All use, and in particular any distribution, reprinting, exploitation or adaptation of this document shall only be allowed with express, written approval by Lindner.