Shading Tension Systems

Shading Tension Systems

Shading Tension Systems - internal and external applications 2 s The Horiso range of Shading Tension Systems are retractable fabric based systems for installation on horizontal and sloped glazing. The systems are fully automated, suitable for both internal and external applications and include systems that deploy in any direction. The fabric is held under tension through-out its travel and can be stopped in any position. A relieving roller is used for intermediate fabric support when required. The systems were designed to maximise daylight under dull conditions and reduce solar heat gain and glare for both commercial and residential buildings. s include offices, shops, hotels and heritage public buildings. Benefits All motorised systems. All retractable systems. Operate on horizontal, curved and sloped glazing. Internal and external applications. Maximise daylight under dull conditions. Reduce solar heat gain and glare. High durability in all weather conditions. Features Highly flexible. High quality components. Shaped windows accommodated. Motorised guided systems can be stopped during operation. Various draw directions available: - bottom to top - top to bottom - side to side. Blackout system available. Integrated control options. Option - systems complete with fabric. Standard finishes Aluminium components - standard polyester powder coated. (May vary - see separate technical sheets.) Fasteners - stainless steel and other steel parts galvanised against corrosion. Return pulleys - stainless steel. Climate Ready commitment Horiso s commitment and action to reducing the effects of climate change has resulted in our development of a Climate Ready status which includes the installation and operation by a Climate Ready Control System to minimise energy consumption and maximise the use of daylight. A Horiso Climate Ready solution encompasses consideration of: A building s location including the geographical position, sun angles, reflected glare from other buildings and natural environment such as city or country position A building s orientation and the glazed areas on different facades Robust products and systems needs due to extreme weather exposure The architectural requirements of the building. In this brochure, Horiso has endeavoured to provide accurate information on our Shading Tension Systems. If you require further details, separate technical sheet are available or please contact your Horiso representative. Cover and insert: Darling Quarter, Sydney - Australia. System - Horsio STS 200. The project has won a range of design awards including 6 Star Green Star Office as Built version 3 rating, 6 Star Green Star - V2 Office Design certified rating and 5 Star NABERS Energy and Water Rating. Please note: Specifications may change without notice.

STS 100 Internal unguided tension system STS 101 Shaped internal unguided tension system The Shading Tension System 100 is suitable for rectangular fabric shades installed under horizontal, vertical or sloping glazing, including drawing vertically from the bottom to top. With additional relieving rollers the system can also change direction to profile non-linear or curved glazed surfaces. A 85 mm galvanized steel roller incorporating both the motor and the spring compensation cassette with integral tension adjustment gear. Extruded aluminium hem bar supporting the free end of the fabric. Continuous nylon coated tension cable deploys and retracts the blind via two 6.5 m capacity cable drums, one on either end of the fabric roller. Supplied with either top or back fix universal roller brackets and return pulleys. Maximum width: 3 m Maximum draw: 6.5 m Maximum fabric area: 16 m 2 s Shading Tension System 101 is designed for buildings with large apex windows requiring rightangled, triangular fabric shades under horizontal, vertical or sloping glazing. Draws bottom to top. A 85 mm galvanized steel roller tube incorporating both the motor and the spring compensation cassette to maintain constant tension during operation. 5 m capacity cable drum to take up the continuous nylon-coated stainless steel tension cable. A gear-operated mechanical tension adjustment within the drum to enable the fabric tension to be adjusted between 5 and 25 kg. Supplied with either top or back fix roller brackets and back fix anchor brackets. Maximum draw: 5 m Maximum fabric area: 9 m 2 Basic fabric weight (1 metre wide system): 7.5 kg 3

STS 120 Internal guided tension system STS 140 Internal wire guided tension system The Shading Tension System 120 is suitable for rectangular fabric shades installed internally behind or below horizontal and sloping glazing. Draws bottom to top. A single 85 mm galvanized steel roller incorporating both the motor and the spring compensation cassette with integral tension adjustment gear. Extruded aluminium hem bar supporting the free end of the fabric. Continuous nylon coated tension cable to deploy and retract the blind via two 6.5 m capacity cable drums, one on either end of the fabric roller. Supplied with either top or back fix roller brackets. Supplied with top or side fix side guide mounting brackets. (standard hem bar) or 5 m (heavy duty hem bar) Maximum draw: 6.5 m Maximum fabric area: 16 m 2 Basic fabric weight: 7.5 kg The Shading Tension System 140 is suitable for rectangular fabric shades installed under horizontal and sloping glazing, and vertical applications where the fabric draws from bottom to top. This system does not require relieving rollers. A 85 mm galvanized steel roller incorporating motor and the spring compensation cassette with integral tension adjustment gear. Extruded aluminium hem bar supporting the free end of the fabric guided by two 5 mm diameter stainless steel cables. A continuous nylon coated tension cable to deploy and retract the blind via two 6.5 m capacity cable drums, one on either end of the fabric roller. Supplied with either top or back fix roller brackets and anchor brackets. Maximum draw: 6.5 m Maximum fabric area: 18 m 2 4

STS 200 Internal heavy duty unguided tension system STS 308 / 312 Internal vertical roller systems The Shading Tension System 200 is large scale solution for rectangular fabric shades installed under horizontal, vertical or sloping glazing. A 127 mm extruded aluminium fabric roller tube incorporating the motor. A steel take-up roller incorporating the spring compensation cassette to maintain constant tension during operation. Cable drums on the take-up roller for the nylon-coated galvanised steel tension cable. A gear operated mechanical tension adjustment in the spring cassette to enable the fabric tension to be adjusted between 15 and 50 kg. Supplied with mounted T bolts. (Contact Horiso for bracket details. The Shading Tension Systems 308/312 are large scale, cost effective solutions for rectangular fabric shades which are installed on vertical glazing. A 85 mm galvanized steel or 127 mm aluminium roller incorporating the motor. Extruded aluminium hem bar supporting the free end of the fabric guided by two 3 mm diameter nylon coated stainless steel cables. Supplied with either top or back fix roller brackets. Supplied with back fix anchor brackets. Maximum width: 4.2 (308) / 6 m (312) Maximum draw: 6 (308) / 12 m (312) Maximum fabric area: 25 m 2 (308) / 72 m 2 ( 312) Basic fabric weight: 7 kg (308) / 9 kg (312) Maximum draw: 18 m Maximum fabric area: 60 m 2 Basic fabric weight: 32 kg 5

STS 421 Shaped External wire guided tension system STS 440 External wire guided tension system The Shading Tension System 421 is suitable for right angled triangular fabric shades installed on horizontal or sloping glazing. Draws to each side. A 85 mm galvanized steel roller incorporating motor and spring compensation cassette to maintain tension during operation. 5 m capacity cable drum to take up continuous nylon coated stainless steel tension cable. Gear-operated mechanical tension adjustment within the drum to enable the fabric tension to be adjusted between 5 and 25kg. Extruded aluminium head box. Optional fabric battens to support diagonal edge. Supplied with side fix cheek plates and return pulley brackets. Optional side fix relieving roller brackets. Maximum draw: 5 m Maximum fabric area: 9 m 2 Maximum fabric weight per metre width: 5 kg The Shading Tension System 440 is suitable for rectangular fabric shades installed in front or above the glazing, including vertical and horizontal applications where the fabric draws from bottom to top or side to side. This system does not require relieving rollers. A single 85 mm galvanized steel roller incorporating both the drive motor and the spring compensation cassette with integral tension adjustment gear. Extruded aluminium hem bar supporting the free end of the fabric and two 5 mm diameter stainless steel cables. A continuous nylon coated tension cable to deploy and retract the blind via two 6.5 m capacity cable drums, one on either end of the fabric roller. Extruded aluminium head box protects motor and roller assembly. Supplied with back fix roller and anchor brackets. Maximum draw: 6.5 m Maximum fabric area: 16 m 2 6

STS 660 Internal & external rail guided tension system Control Horiso Shading Tension Systems can be controlled in different ways: Motorised via a switch Motorised via touch phone and hand held devices Motorised via Horsio Climate Ready Control System - optimum building management solution. Motorised via Building management system - BACnet, Lonworks and KNX protocols. The Shading Tension System 660 is a light and compact solution for rectangular fabric shades installed under or over horizontal and vertical glazing. Draws bottom to top or top to bottom and side to side. Ideal when blackout is required. A 27 mm diameter aluminium fabric roller tube incorporating motor and tension spring. Extruded aluminium hem bar with rubber sealing strip. Nylon-coated steel tension cable to draw and retract blind via two cable spools one on either end of fabric roller. Aluminium head box, return pulley and guide rails. Side lock mechanism ensures fabric retention, and no light or insect access. Supplied with fabric pre-fitted onto roller. Supplied with side or face fix head box and rail guides. Maximum width: 3 m Maximum draw: 3 m Maximum fabric area: 9 m 2 Maximum internal / screen fabric weight: 32 kg Maximum external / blackout fabric weight: 34 kg Horiso Climate Ready Control Systems Horsio Climate Ready Control Systems consist collectively of motor controllers, other hardware and software packages that will operate all solar shading systems. The control systems are installed wireless (EZ1), hardwired (EB2) or a combination of both. Benefits System networked with A/V products, building automation systems and/or respond to weather conditions. One control system operates a range of shading systems. Easy integration due to open protocol requirements. Flexible control options to suit individual project requirements. No replacement of system required for upgrade. Climate Ready Control Systems allow customised functionality for individual buildings with the control system performing effectively as a component of the overall facade. Software functions include: Shading devices compatibility Switch user/override capabilities Sensors - Dynamic wind and brightness response Maintenance mode Building management system interface Reporting and alarms. Options Air conditioning integration. Horiso ESD - ECO-Mode - preserves the inside temperature of the building by extending the shading over night and utilising solar radiation during the day (winter mode). Horiso Smart Remote apps for hand held devices. Graphical User Interface (GUI). User control web application. 7

www.horiso.com.au Horiso and Climate Ready are registered trademarks of Horiso Horiso is a corporate member of the Australasian Corrosion Association Inc. Revit is a registered trademark of Autodesk ArchiCAD is a registered trademark of Graphisoft Worldwide BACnet is a registered trademark Lonworks is a registered trademark KNX is a registered trademark. Copyright Horiso 2014. HORSTS-0514AUS