age 2 of 30 Report No.: 17038598 001 TEST REORT IEC 62560 Self-Ballasted LED-Lamp for general lighting services by voltage > 50V Safety specifications Report Number....: Date of issue... : Total number of pages... : See the cover page. See the cover page. See the cover page. Applicant s name...: See the cover page. Address...: See the cover page. Test specification: Standard... : IEC 62560:2011 (First Edition) Test procedure... : TUV mark Non-standard test method..: N/A Test Report Form No....: IEC62560A Test Report Form(s) Originator... : DEKRA Certification B.V. Master TRF... : Dated 2011-10 Copyright 2011 Worldwide System for Conformity Testing and Certification of Electrotechnical Equipment and Components (IECEE), Geneva, Switzerland. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. If this Test Report Form is used by non-iecee members, the IECEE/IEC logo and the reference to the CB Scheme procedure shall be removed. This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02. Test item description... : LED corn bulb Trade Mark... : Factory...: Same as applicant Model/Type reference...: See general product information for detail Ratings...: 100-277VAC, 50/60Hz (general product information for detail)
Summary of testing: age 3 of 30 Report No.: 17038598 001 Tests performed (name of test and test clause): Besides of the tests according to EN 62560:2012, the following tests are also performed: Annex 1: Critical components list Annex 2: Thermal test (cap temperature test) Annex 3: European group differences and national differences Annex 4: Tests according to standard EN 62471: 2008 Full tests are performed on the model IDO-801-10W,IDO-801-22W,IDO-802-54W-E40, IDO-803-120W. Copy of marking plate Testing location: For tests of EN 62471:2008 TUV Rheinland (Guangdong) Ltd. No.199, Kezhu Road, Science City, Development Zone, Guangzhou, Guangdong, China For tests of EN 62560:2012 Shenzhen Bontek Compliance Testing LaboratoryCo., Ltd 1/F, Block East H-3, OCT Eastern Ind. Zone, Qiaocheng East Road, Nanshan, Shenzhen, China Shenzhen Vilas Technology Co., Ltd. 3rd Floor,Building D,Tong Kang Fu Industrial ark,yingrenshi Community,Shiyan,Baoan District,Shenzhen,Gunagdong,China. The artwork below may be only a draft. The use of certification marks on a product must be authorized by the respective NCBs that own these marks. LED CORN BULB IDO-801-10W AC 100-277V 50/60Hz 0.2A Max 10W CCT.: 7000K ta:40ºc FOR INDOOR USE ONLY LED CORN BULB IDO-801-22W AC 100-277V 50/60Hz 0.3A Max 22W CCT.: 7000K ta:40ºc FOR INDOOR USE ONLY Made in China Made in China LED CORN BULB IDO-802-54W AC 100-277V 50/60Hz 0.6A Max 54W CCT.: 7000K ta:40ºc FOR INDOOR USE ONLY LED CORN BULB IDO-803-120W AC 100-277V 50/60Hz 1.3A Max 120W CCT.: 7000K ta:40ºc FOR INDOOR USE ONLY Made in China Made in China Note: these labels are only representative, other model label bear the same content and the same design, except model name and rating are different correspondingly. TRF No. IEC62560A
age 4 of 30 Report No.: 17038598 001 Test item particulars...: Classification of installation and use...: -- Supply Connection...: E27 or E40...: ossible test case verdicts: - test case does not apply to the test object... : N/A - test object does meet the requirement... : (ass) - test object does not meet the requirement... : F (Fail) Testing... : Date of receipt of test item... : 2014-07-14 Date (s) of performance of tests... : 2014-07-14 to 2014-10-10 General remarks: The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. "(see Enclosure #)" refers to additional information appended to the report. "(see appended table)" refers to a table appended to the report. Clause numbers between brackets refer to clauses in IEC 61347-1 Throughout this report a comma / point is used as the decimal separator. General product information: roduct: LED lamp, non-dimmable, ta=40ºc. 1. All the models are the same construction, except different cap type. 2. All models employed SELV-equivalent LED drivers, and there are 4 series of circuit diagram, within the identical series, CB layouts are the same each other, only transformer secondary turns and some components rating are different, within all series the max. output voltage of drivers is 57,6Vdc. 3. Item 1 and 2 models employ the same CB layout. 4. Models of item 1, 2 and 3 are filled with potting material. 5. Models of item 4 are heavier than 1 kg, precaution should be took to prevent impair contact making and lamp retention. 6. All models employed the identical LED chip and color temperature range is 2700-7000K. Model list: ower Weight LED quantities Item. Model name Input Cap (W) (g) (pcs) IDO-801-08W 100-277V,50/60Hz 8 E27 160 24 1 IDO-801-10W 100-277V,50/60Hz 10 E27 240 32 IDO-801-14W 100-277V,50/60Hz 14 E27 260 42 2 IDO-801-18W 100-277V,50/60Hz 18 E27 320 56 IDO-801-22W 100-277V,50/60Hz 22 E27 440 70 TRF No. IEC62560A
age 5 of 30 Report No.: 17038598 001 continued Item. Model name Input ower Weight LED quantities Cap (W) (g) (pcs) IDO-802-27W 100-277V,50/60Hz 27 E27 610 81 IDO-802-27W-E40 100-277V,50/60Hz 27 E40 624 81 IDO-802-36W 100-277V,50/60Hz 36 E27 700 108 3 IDO-802-36W-E40 100-277V,50/60Hz 36 E40 716 108 IDO-802-45W 100-277V,50/60Hz 45 E27 790 135 IDO-802-45W-E40 100-277V,50/60Hz 45 E40 804 135 IDO-802-54W 100-277V,50/60Hz 54 E27 810 162 IDO-802-54W-E40 100-277V,50/60Hz 54 E40 824 162 IDO-803-80W 100-277V,50/60Hz 80 E40 1630 234 4 IDO-803-100W 100-277V,50/60Hz 100 E40 1650 280 IDO-803-120W 100-277V,50/60Hz 120 E40 1680 336 TRF No. IEC62560A
age 6 of 30 Report No.: 17038598 001 IEC 62560 Clause Requirement + Test Result - Remark Verdict 4 GENERAL REQUIREMENTS 4.1 The lamp shall be so designed and constructed that in normal use cause no danger to the user. 4.2 Self-ballasted LED-Lamp are non-repairable. 5 MARKING 5.1 Mandatory marking - mark of origin See marking label - rated supply voltage (V)... : 100-277V~ - rated wattage (W)... : See marking label - rated frequency (Hz)... : 50/60 Hz 5.2 Addition marking - burning position N/A - rated current (A)... : Stated in user instruction - weight significantly higher N/A - special conditions or restrictions Stated in user instruction Not suitable for dimming; symbol used See marking label - eye protection N/A 5.3 Marking durable and legible rubbing 15 s water, 15 s petroleum; marking legible 6 INTERCHANGEABILITY 6.1 Cap interchangeability in accordance with IEC 60061-1 Gauge in accordance with IEC 60061-3 6.2 Bending moment, axial pull and mass Bending moment imparted by the lamp at the lampholder Lamp construction withstands axial pull (Nm)... : 40N Max. 1,67 Nm < 2 Nm Mass not exceeding value table 2 (kg)... : For E27 cap models 7 ROTECTION AGAINST ACCIDENTAL CONTACT WITH LIVE ARTS Internal, basic insulated or live metal parts not accessible Tested with a test finger with a force of 10 N TRF No. IEC62560A
age 7 of 30 Report No.: 17038598 001 IEC 62560 Clause Requirement + Test Result - Remark Verdict Compliance checked with appropriate gauges 8 INSULATION RESISTANCE AND ELECTRIC STRENGTH 8.2 After storage 48 h at 91-95% relative humidity and 20-30 C measuring of insulation resistance with d.c. 500 V (M ): 4 M for double or reinforced insulation... : Between live parts of cap and accessible parts: 100 M > 4 M Between input to output of LED driver: 100 M > 4 M 8.3 Immediately after clause 8.2 electric strength test for 1 min Double or reinforced insulation, 4U + 2000 V No flashover or breakdown Between live parts of cap and accessible parts: 3108V Between input to output of LED driver: 3108V 9 MECHANICAL STRENGTH Torsion resistance of unused lamps 9.1 Torque test 3Nm for E40 cap, no relative movement B 15 d Cap... 1,15 Nm B 22 d Cap... 3,0 Nm N/A N/A E 11 Cap... 0,8 Nm N/A E 12 Cap... 0,8 Nm N/A E 14 Cap... 1,15 Nm N/A E 17 Cap... 1,5 Nm N/A E 26 or E27 Cap... 3,0 Nm No relative movement GX 53 Cap... 3,0 Nm N/A 9.2 Torsion resistance of lamps after a defined time of usage N/A Torsion resistance of used lamp N/A 9.3 Repetition of clause 8 Clause 8 shall comply after the mechanical strength test. 10 CA TEMERATURE RISE TRF No. IEC62560A
age 8 of 30 Report No.: 17038598 001 IEC 62560 Clause Requirement + Test Result - Remark Verdict The cap temperature rise Δt s of the lamp shall not exceed 120 K. See annex 1. 11 RESISTANCE TO HEAT arts of insulating material retaining live parts in position, ball-pressure test: - part; test temperature ( C)... : See table 11 - part; test temperature ( C)... : See table 11 12 RESISTANCE TO FLAME AND IGNITION External parts of insulating material preventing electric shock glow-wire test 650 C Enclosure Bobbin of inductor Bobbin of T1 CB of LED driver LED Cover LED board CB - flame extinguished within 30 s No flame, no drops. - no flaming drops igniting tissue paper 13 FAULT CONDITIONS 13.2 Extreme electrical conditions (dimmable lamps) N/A Lamp withstands overpower condition >15 min. Lamp fails safe after 15 min overpower condition Lamp with automatic protective device or power limiter, test performed 15 min. at limit. N/A N/A N/A 13.3 Extreme electrical conditions (non-dimmable lamps) Tested according 13.2 (as far as possible) 13.4 Short-circuit across capacitors (see appended table 13) 13.5 Fault conditions: where diagram indicates fault condition impairs safety, electronic components have been short-circuited or disconnected (see appended table 13) 13.6 When operated under fault conditions the lamp - does not emit flames or molten material - does not produce flammable gases or smoke - live parts not accessible After the tests the insulation resistance with d.c. 1000 V complies with requirements of Cl. 8.1... : Between live part of cap and accessible parts: 100M 14 (16) CREEAGE DISTANCES AND CLEARANCES TRF No. IEC62560A
age 9 of 30 Report No.: 17038598 001 IEC 62560 Clause Requirement + Test Result - Remark Verdict Creepage distances and clearances according to Table 3 and 4 of IEC 61347-1, as appropriate rinted boards see clause 14 of IEC 61347-1 Insulating lining of metallic enclosures (see appended table 14) 13 TABLE: tests of fault conditions art Simulated fault Result Hazard IDO-803-120W BD1 pin (1-2) Short circuit: 90-304,7 V 0 A, 0 W, fuse open immediately. No C9 Short circuit: 90-304,7 V 0 A, 0 W, fuse open immediately. No D1 Short circuit: 90-304,7 V 0 A, 0 W, fuse open immediately. No U1 pin(13-14) Short circuit: 90-304,7 V 0,092 A, 0,97 W, lamp shut down, can recovery. No Q9 pin(g-d) Short circuit: 90-304,7 V 0 A, 0 W, fuse open immediately. No Q9 pin(g-s) Short circuit: 90-304,7 V 0,092 A, 0,97 W, lamp shut down, can recovery. No Q9 pin(d-s) Short circuit: 90-304,7 V 0 A, 0 W, fuse open immediately. No U2 pin(12-15) Short circuit: 90-304,7 V 0,092 A, 0,97 W, lamp shut down, can recovery. No U2 pin(5-12) Short circuit: 90-304,7 V 0,092 A, 0,97 W, lamp shut down, can recovery. No R53 Short circuit: 90-304,7 V 1,273A, 127,6W, lamp worked as normal. No Q19 Short circuit: 90-304,7 V 0,132 A, 6,1 W, lamp shut down, can recovery. No D17 Short circuit: 90-304,7 V 0,028A, 0,1W, lamp shut down, can not recovery. No U3 pin (1-2) Short circuit: 90-304,7 V 0,025A, 0,1W, lamp shut down, can not recovery. No U3 pin (3-4) Short circuit: 90-304,7 V 0,089A, 4,3W, lamp shut down, can not recovery. No T1 pin(8-9) Short circuit: 90-304,7 V 0,119A, 5,9W, lamp shut down, can recovery. No T1 pin(10-12) Short circuit: 90-304,7 V 0,279A, 10,3W, lamp shut down, can recovery. No T1 pin(1-3) Short circuit: 90-304,7 V 0,109A, 5,9W, lamp shut down, can recovery. No T1 pin(2-4) Short circuit: 90-304,7 V 0,539A, 12,5W, lamp shut down, can recovery. No R24 Short circuit: 90-304,7 V 1,273A, 127,5W, lamp worked as normal. No R75 Short circuit: 90-304,7 V 1,273A, 127,5W, lamp worked as normal. No R62 Short circuit: 90-304,7 V 1,273A, 127,5W, lamp worked as normal. No D2 Short circuit: 90-304,7 V 0 A, 0 W, fuse open immediately. No R35 Short circuit: 90-304,7 V 1,273A, 127,5W, lamp worked as normal. No Output Short circuit: 90-304,7 V 0,147A, 7,1W, lamp shut down, can recovery. No IDO-801-10W TRF No. IEC62560A
age 10 of 30 Report No.: 17038598 001 IEC 62560 Clause Requirement + Test Result - Remark Verdict D1 Short circuit: 90-304,7 V 0 A, 0 W, fuse open immediately. No C1 Short circuit: 90-304,7 V 0 A, 0 W, fuse open immediately. No U1 pin(1-6) Short circuit: 90-304,7 V 0,012A, 1,0W, lamp shut down, can recovery. No R16 Short circuit: 90-304,7 V 0,013A, 1,4W, lamp shut down, can recovery. No R8 Short circuit: 90-304,7 V 0,042A, 10,6W, lamp worked as normal. No Q1 pin(g-d) Short circuit: 90-304,7 V 0 A, 0 W, fuse open immediately. No Q1 pin(g-s) Short circuit: 90-304,7 V 0 A, 0 W, fuse open immediately. No Q1 pin(d-s) Short circuit: 90-304,7 V 0 A, 0 W, fuse open immediately. No D9 Short circuit: 90-304,7 V 0,012A, 0,8W, lamp shut down, can recovery. No R6 Short circuit: 90-304,7 V 0,040A, 9,6W, lamp worked as normal. No R18 Short circuit: 90-304,7 V 0,015A, 1,2W, lamp started flashing, can recovery. No T1 pin (A-B) Short circuit: 90-304,7 V 0,012A, 0,8W, lamp shut down, can recovery. No T1 pin(1-3) Short circuit: 90-304,7 V 0,012A, 1,2W, lamp shut down, can recovery. No T1 pin(4-5) Short circuit: 90-304,7 V 0,013A, 1,4W, lamp shut down, can recovery. No Output Short circuit: 90-304,7 V 0,013A, 1,4W, lamp shut down, can recovery. No IDO-801-22W D7 Short circuit: 90-304,7 V 0 A, 0 W, fuse open immediately. No C1 Short circuit: 90-304,7 V 0 A, 0 W, fuse open immediately. No R4 Short circuit: 90-304,7 V 0,086A, 22,5W, lamp worked as normal. No Q1 pin(g-d) Short circuit: 90-304,7 V 0 A, 0 W, fuse open immediately. No Q1 pin(g-s) Short circuit: 90-304,7 V 0 A, 0 W, lamp shut down, can recovery. No Q1 pin(d-s) Short circuit: 90-304,7 V 0 A, 0 W, fuse open immediately. No R16 Short circuit: 90-304,7 V 0,045A, 3,3W, lamp started flashing, can recovery. No R10 Short circuit: 90-304,7 V 0,019A, 1,4W, lamp shut down, can recovery. No T1 pin (A-B) Short circuit: 90-304,7 V 0,018A, 0,9W, lamp shut down, can recovery. No T1 pin(1-3) Short circuit: 90-304,7 V 0,018A, 0,8W, lamp shut down, can recovery. No T1 pin(4-5) Short circuit: 90-304,7 V 0,02A, 1,6W, lamp shut down, can recovery. No D6 Short circuit: 90-304,7 V 0,018A, 1,2W, lamp shut down, can recovery. No Output Short circuit: 90-304,7 V 0,019A, 1,5W, lamp shut down, can recovery. No IDO-802-54W BD1 Short circuit: 90-304,7 V 0 A, 0 W, fuse open immediately. No C1 Short circuit: 90-304,7 V 0 A, 0 W, fuse open immediately. No R7 Short circuit: 90-304,7 V 0,553A, 54,1W, lamp worked as normal. No TRF No. IEC62560A
age 11 of 30 Report No.: 17038598 001 IEC 62560 Clause Requirement + Test Result - Remark Verdict U1 pin(1-8) Short circuit: 90-304,7 V 0,026A, 1,2W, lamp shut down, can recovery. No R20 Short circuit: 90-304,7 V 0,149A, 4,2W, lamp started flashing, can recovery. No R16 Short circuit: 90-304,7 V 0,032A, 3,1W, lamp shut down, can recovery. No T1 pin (A-B) Short circuit: 90-304,7 V 0,034A, 3,4W, lamp shut down, can recovery. No T1 pin(1-3) Short circuit: 90-304,7 V 0,026A, 1,0W, lamp shut down, can recovery. No T1 pin(5-6) Short circuit: 90-304,7 V 0,028A, 1,8W, lamp shut down, can recovery. No D6A Short circuit: 90-304,7 V 0,034A, 3,4W, lamp shut down, can recovery. No Q1 pin(g-d) Short circuit: 90-304,7 V 0 A, 0 W, fuse open immediately. No Q1 pin(g-s) Short circuit: 90-304,7 V 0 A, 0 W, lamp shut down, can recovery. No Q1 pin(d-s) Short circuit: 90-304,7 V 0 A, 0 W, fuse open immediately. No Output Short circuit: 90-304,7 V 0,03 A, 2,4 W, lamp shut down, can recovery. No 11 TABLE: Ball ressure Test of Thermoplastics Allowed impression diameter (mm)...: 2mm art Test temperature ( C) Impression diameter (mm) CB of LED driver 140 C 0,8 mm Enclosure 109 C 1,3 mm Transformer bobbin 139 C 1,0 mm Inductor bobbin 132 C 1,0 mm LED module substrate CB 125 C 0,8 mm LED cover 110 C 1,3 mm Supplementary information: 14(16) TABLE: Clearance and Creepage Distance Measurements clearance cl and creepage distance cr at/of: IDO-801-10W U (V) U rms (V) Required cl (mm) Measured cl (mm) Required cr (mm) Measured cr (mm) L to N before fuse 480 277 1,7 3,3 2,8 3,3 Different poles of fuse 480 277 1,7 3,1 2,8 3,1 CY1 primary pin to secondary pin (RI) rimary components trace to secondary trace (RI) 440 216 4,2 6,5 5,1 6,5 480 277 4,2 6,5 5,1 6,5 TRF No. IEC62560A
age 12 of 30 Report No.: 17038598 001 IEC 62560 Clause Requirement + Test Result - Remark Verdict T1 primary winding/core to secondary components T1 primary winding/ core to secondary pin 616 248 4,6 8,6 5,1 8,6 616 248 4,6 5,1 5,1 5,1 Live parts to outside 480 277 4,2 5,1 5,1 5,1 IDO-801-22W L to N before fuse 480 277 1,7 4,6 2,8 4,6 Different poles of fuse 480 277 1,7 3,2 2,8 3,2 CY1 primary pin to secondary pin (RI) rimary components trace to secondary trace (RI) T1 primary winding/core to secondary components (CY1 sec. pin) T1 primary winding/ core to secondary pin 392 184 4,0 8,0 5,1 8,0 480 277 4,2 6,6 5,1 6,6 640 240 4,6 5,0 5,1 6,0 640 240 4,6 5,1 5,1 5,1 Live parts to outside 480 277 4,2 5,1 5,1 5,1 IDO-802-54W-E40 L to N before fuse 480 277 1,7 3,0 2,8 3,0 Different poles of fuse 480 277 1,7 3,2 2,8 3,2 CY1 primary pin to secondary pin (RI) rimary components trace to secondary trace (RI) T1 primary winding/core to secondary components T1 primary winding/ core to secondary pin 392 184 4,0 7,2 5,1 9,2 480 277 4,2 5,0 5,1 6,0 712 240 4,8 5,3 5,1 5,3 712 240 4,8 5,1 5,1 5,1 Live parts to outside 480 277 4,2 5,1 5,1 5,1 IDO-803-120W L to N before fuse 480 277 1,7 7,5 2,8 7,5 Different poles of fuse 480 277 1,7 3,0 2,8 3,0 CY3 primary pin to secondary pin (BI) CY3-1 primary pin to secondary pin (SI) 480 277 2,1 3,0 2,8 3,0 480 277 2,1 3,0 2,8 3,0 TRF No. IEC62560A
age 13 of 30 Report No.: 17038598 001 IEC 62560 Clause Requirement + Test Result - Remark Verdict rimary components trace to secondary trace (RI) T1 primary winding/core to secondary components T1 primary winding/ core to secondary pin 480 277 4,2 4,3 5,1 8,3 560 260 4,4 6,0 5,1 6,0 560 260 4,4 5,1 5,1 5,1 Live parts to outside 480 277 4,2 5,1 5,1 5,1 Supplementary information: TRF No. IEC62560A
age 14 of 30 Report No.: 17038598 001 IEC 62560 Clause Requirement + Test Result - Remark Verdict Annex 1 Object / part No. For all models TABLE: Critical components information Manufacturer/ trademark Type / model Lamp cap --- E27/E40 lastic enclosure LED cover LED driver CB For models of item 4 LED driver CB For models of item1, 2 LED driver CB For models of item 3 TEIJIN LIMITED RESIN AND LASTIC TEIJIN LIMITED RESIN AND LASTIC SHENZHEN NEW INGTAI CIRCUIT BOARD CO LTD Technical data Copper content: >60% -- LN-2520(##) V-0, 125 C -- KN-1300(#) V-0, 105 C -- Standard Mark(s) of conformity 1) Tested with appliance UL E50075+ Tested with appliance UL E50075+ Tested with appliance T-M V-0, 130 C -- UL E344059 SHENZHEN ZHONG XIN HUA ELECTROCO ZXH-1 V-0, 130 C -- UL E331298 LTD GLOBAL RECISION CIRCUITS CO LTD SHENZHEN GLORYSKY ELECTRONICS CO LTD SHENZHEN HONGMY RECISION CIRCUIT CO LTD SHENZHEN LINGHANGDA ELECTRONICS CO LTD GLOBAL RECISION CIRCUITS CO LTD SHENZHEN GLORYSKY ELECTRONICS CO LTD SHENZHEN HONGMY RECISION CIRCUIT CO LTD SHENZHEN LINGHANGDA ELECTRONICS CO LTD T-1 V-0, 130 C -- UL E324220 GS-D V-0, 130 C -- UL E257384 HMY-D V-0, 130 C -- UL E320045 LH-1 V-0, 130 C -- UL E316475 W-2 V-0, 130 C -- UL E324220 GS-M V-0, 130 C -- UL E257384 HMY-M V-0, 130 C -- UL E320045 LH-1 V-0, 130 C -- UL E316475 TRF No. IEC62560A
age 15 of 30 Report No.: 17038598 001 IEC 62560 Clause Requirement + Test Result - Remark Verdict LED board CB L/N wire Heat shrinkable tube LED driver output wire otting material for models of item 1, 2 and 3 Connector For models of item 1 F1 L1, L2,L3 winding CX1 SHUNG CHING ELECTRONIC TECHNOLOGY CO LTD DZ1SV V-0, 90 ºC -- UL E323040 Hong Kong Dong Tian 105 C, 600V, Tong Li Electricity Co., 1015 -- 20AWG UL E254854 Ltd. DONG GUAN SHENG 20AWG, AI ELECTRIC WIRE 1332 200 C, 300V & CABLE CO LTD -- ULE347603 SHENZHEN WOER VW-1, 125 C, HEAT-SHRINKABLE RSFR-H 600V MATERIAL CO LTD -- UL E203950 CHANGYUAN ELECTRONICS CB-DWT 125 C -- UL E180908 (SHENZHEN) CO LTD SHENZHEN WOER HEAT-SHRINKABLE RSFR 125 C -- UL E203950 MATERIAL CO LTD DONG GUAN SHENG 200 C, 300V AI ELECTRIC WIRE 1332 24AWG & CABLE CO LTD -- UL E347603 SHENZHEN EVOUTE UL E335127+ MATERIAL INDUSTRY OT906 105 C,V-0 -- Tested with CO LTD appliance JAAN AVIATION ELECTRONICS ES3S002SZA -- -- UL E67741 INDUSTRY LTD DONGGUAN HONGDA ELECTRONIC TECHNOLOGY CO LTD XC Electronics (Shen Zhen) Corp. Ltd. SHANTOU SHENGANG ELECTRICAL INDUSTRIAL CO LTD SHANTOU HIGH-NEW TECHNOLOGY DEVELOMNT ZONE SONGTIAN ENTERRISE CO LTD SHENZHEN SINCERITY TECHNOLOGY CO LTD 31TC 1A, 250V~ -- 4T-Serie(s) 1A, 250Vac EN 60127-3 40028150 40029295 xuew/130 130 C -- UL E239508 MX MX/MK 275VAC, 110 C, 0,22μF 275VAC, 110 C, 0,22μF EN 60384-14 EN 60384-14 40034679 40028812 TRF No. IEC62560A
age 16 of 30 Report No.: 17038598 001 IEC 62560 Clause Requirement + Test Result - Remark Verdict MOV1 T1 primary winding T1 secondary winding T1 bobbin () T1 tape T1 tube CY1 SHANTOU HIGH-NEW TECHNOLOGY DEVELOMNT ZONE SONGTIAN ENTERRISE CO LTD Hongzhi Enterprises Ltd Brightking (Shenzhen) Co., Ltd. STE-10D511K 10D511K 10D511K 510V, 85 C 510V, 85 C 510V, 125 C EN 61051-1 EN 61051-2 EN 61051-2-2 EN 61051-1 EN 61051-2 EN 61051-2-2 EN 61051-1 EN 61051-2 EN 61051-2-2 40023049 40037512 40027827 TAI-I COER (GUAN UEW ZHOU) CO.,LTD 130 C -- UL E85640 SHANGHAI LUOKUN TIW-B 130 C -- CO.,LTD 40023686 CHANGCHUN LASTICS CO., LTD T200HF V-0, 150 C -- UL E59481 SUMITOMO BAKELITE M-9630 CO LTD V-0, 150 C -- UL E41429 JING JIANG YA HUA RESSURESENSITIV E JLUE CO., LTD OR CT-280B 130 C -- UL E165111 EQUIVALENT CHANGYUAN ELECTRONICS GROU CO LTD SHANTOU HIGH-NEW TECHNOLOGY DEVELOMNT ZONE SONGTIAN ENTERRISE CO LTD CB-TT-S 600V, 200 C -- UL E180908 CD-Series LED chip Samsung Electronics SMWHT221MD5 For models of item 2 F1 L1winding L2 winding DONGGUAN HONGDA ELECTRONIC TECHNOLOGY CO LTD XC Electronics (Shen Zhen) Corp. Ltd. SHANTOU SHENGANG ELECTRICAL INDUSTRIAL CO LTD SHANTOU SHENGANG ELECTRICAL INDUSTRIAL CO LTD 2200pF, 400VAC, 125 C 3V, 100 ma, 0,3 W, 2700-7000K, white light EN60384-14 31TC 1A, 250V~ EN 60127-3 4T-Serie(s) 1A, 250Vac EN 60127-3 -- VED 40025754 Tested with appliance 40028150 40029295 xuew/130 130 C -- UL E239508 xuew/130 130 C -- UL E239508 TRF No. IEC62560A
age 17 of 30 Report No.: 17038598 001 IEC 62560 Clause Requirement + Test Result - Remark Verdict L2 bobbin L2 tape CX1 ZRV1 L3 winding T1 primary winding T1 secondary winding T1 bobbin () T1 tape T1 tube CY1 TRF No. IEC62560A CHANGCHUN LASTICS CO., LTD T200HF V-0, 150 C -- UL E59481 JING JIANG YA HUA RESSURESENSITIV E JLUE CO., LTD OR CT-280B 130 C -- UL E165111 EQUIVALENT SHANTOU HIGH-NEW TECHNOLOGY 275VAC, DEVELOMNT ZONE MX EN 60384-14 110 C, 0,22μF 40034679 SONGTIAN ENTERRISE CO LTD SHENZHEN SINCERITY 275VAC, MX/MK EN 60384-14 TECHNOLOGY CO 110 C, 0,22μF 40028812 LTD EN 61051-1 Brightking (Shenzhen) 10D511K 510V, 125 C EN 61051-2 Co., Ltd. 40027827 EN 61051-2-2 SHANTOU SHENGANG ELECTRICAL xuew/130 130 C -- UL E239508 INDUSTRIAL CO LTD SHANTOU SHENGANG ELECTRICAL xuew/130 130 C -- UL E239508 INDUSTRIAL CO LTD SHANGHAI LUOKUN TIW-B 130 C -- CO.,LTD 40023686 CHANGCHUN LASTICS CO., LTD T200HF V-0, 150 C -- UL E59481 SUMITOMO BAKELITE M-9630 CO LTD V-0, 150 C UL94 UL E41429 JING JIANG YA HUA RESSURESENSITIV E JLUE CO., LTD OR CT-280B 130 C -- UL E165111 EQUIVALENT CHANGYUAN ELECTRONICS CB-TT-S 600V, 200 C -- UL E180908 GROU CO LTD SHANTOU HIGH-NEW TECHNOLOGY DEVELOMNT ZONE SONGTIAN ENTERRISE CO LTD CD-Series LED chip Samsung Electronics SMWHT221MD5 L4 winding SHANTOU SHENGANG ELECTRICAL INDUSTRIAL CO LTD 2200pF, 400VAC, 125 C 3V, 100 ma, 0,3 W, 2700-7000K, white light EN 60384-14 -- VED 40025754 Tested with appliance xuew/130 130 C -- UL E239508
age 18 of 30 Report No.: 17038598 001 IEC 62560 Clause Requirement + Test Result - Remark Verdict For models of item 3 F1 L1 winding RV1 L2 winding L2 bobbin CX2 L4 winding RV2 T1 primary winding T1 secondary winding T1 bobbin T1 tape DONGGUAN HONGDA ELECTRONIC TECHNOLOGY CO LTD XC Electronics (Shen Zhen) Corp. Ltd. SHANTOU SHENGANG ELECTRICAL INDUSTRIAL CO LTD Brightking (Shenzhen) Co., Ltd. SHANTOU SHENGANG ELECTRICAL INDUSTRIAL CO LTD CHANGCHUN LASTICS CO., LTD SHANTOU HIGH-NEW TECHNOLOGY DEVELOMNT ZONE SONGTIAN ENTERRISE CO LTD SHENZHEN SINCERITY TECHNOLOGY CO LTD SHANTOU SHENGANG ELECTRICAL INDUSTRIAL CO LTD Brightking (Shenzhen) Co., Ltd. SHANTOU SHENGANG ELECTRICAL INDUSTRIAL CO LTD SHANGHAI LUOKUN CO.,LTD CHANGCHUN LASTICS CO., LTD SUMITOMO BAKELITE CO LTD JING JIANG YA HUA RESSURESENSITIV E JLUE CO., LTD OR EQUIVALENT 31TC 2A, 250V~ EN 60127-3 40028150 4T-Serie(s) 2A, 250Vac EN 60127-3 40029295 xuew/130 130 C -- UL E239508 10D511K 510V, 125 C EN 61051-1 EN 61051-2 EN 61051-2-2 40027827 xuew/130 130 C -- UL E239508 T200HF V-0, 150 C -- UL E59481 MX MX/MK 275Vac, EN 60384-14 110 C, 0,22 μf 275VAC, 110 C 0,22μF EN 60384-14 40034679 40028812 xuew/130 130 C -- UL E239508 10D561K 560V, 125 C EN 61051-1 EN 61051-2 EN 61051-2-2 40027827 xuew/130 130 C -- UL E239508 TIW-B 130 C -- 40023686 T200HF V-0, 150 C -- UL E59481 M-9630 V-0, 150 C -- UL E41429 CT-280B 130 C -- UL E165111 TRF No. IEC62560A
age 19 of 30 Report No.: 17038598 001 IEC 62560 Clause Requirement + Test Result - Remark Verdict T1 tube CY1 CHANGYUAN ELECTRONICS GROU CO LTD SHANTOU HIGH-NEW TECHNOLOGY DEVELOMNT ZONE SONGTIAN ENTERRISE CO LTD CB-TT-S 600V, 200 C -- UL E180908 CD-Series LED chip Samsung Electronics SMWHT221MD5 L5 winding For models of item 4 SHANTOU SHENGANG ELECTRICAL INDUSTRIAL CO LTD 2200pF, 400VAC, 125 C 3V, 100 ma, 0,3 W, 2700-7000K, white light EN60384-14 -- VED 40025754 Tested with appliance xuew/130 130 C -- UL E239508 F1 Cooper Bussmann LLC SR-5 5A; 250V -- RT1 Gas tube (RA6) MOV6 DONGGUAN HONGDA ELECTRONIC TECHNOLOGY CO LTD THINKING ELECTRONIC INDUSTRIAL CO LTD SHENZHEN BENCENT ELECTRONIC CO LTD Brightking (Shenzhen) Co., Ltd. 31TC 5A; 250V -- 40020046 40028150 SCK-054 5Ω;4A -- UL E138827 B5G600L Φ5,5*6 -- UL E337906 10D471K C2 Xiamen Faratronic MK62 JIMSON MK ACEWIN Electric Industrial MEX Shenzhen Su Rong MX;MK LF1 winding Hsuan Tai Electronic Co. Ltd. HESHAN JIANGCI WIRE & CABLE CO LTD MCY 560V, 125 C Max.0,33μF; Min.275V; Min.100 C Max.0,33μF; Min.275V; Min.100 C Max.0,68μF; Min.275V; Min.100 C Max.0,68μF; Min.275V; Min.100 C Max.0,68μF; Min.275V; Min.100 C EN 61051-1 EN 61051-2 EN 61051-2-2 -- -- -- -- -- 40027827 40000358 40000463 40008614 40008924 125205 XUEW-ULx 130 C -- UL E192838 TRF No. IEC62560A
age 20 of 30 Report No.: 17038598 001 IEC 62560 Clause Requirement + Test Result - Remark Verdict LF1 tape LEO & CO LTD 1801 130 C -- UL E126174 C1 Xiamen Faratronic MK62 JIMSON MK ACEWIN Electric Industrial MEX Shenzhen Su Rong MX;MK Gas tube (RA2,RA3,RA4, RA5) MOV1 MOV2 MOV3 L5 winding Gas tube (RA1) CY1, CY1-1, CY2, CY2-1, CY4-1 Hsuan Tai Electronic Co. Ltd. BRIGHTKING (SHENZHEN) CO LTD Brightking (Shenzhen) Co., Ltd. Brightking (Shenzhen) Co., Ltd. Brightking (Shenzhen) Co., Ltd. HESHAN JIANGCI WIRE & CABLE CO LTD SHENZHEN BENCENT ELECTRONIC CO LTD Success Electronics Hsuan Tai Electronics Co., Ltd. Shantou High-New Technology Developmnt Zone Songtian Enterprise Co Ltd MCY Max.0,33μF; Min.275V; Min.100 C Max.0,33μF; Min.275V; Min.100 C Max.0,33μF; Min275V; Min.100 C Max.0,33μF; Min.275V; Min.100 Max.0,33μF; Min.275V; Min.100 C -- -- -- -- -- 40000358 40000463 40008614 40008924 125205 BK13000702 Φ3,5*4 -- UL E244458 10D561K 10D471K 10D471K 560V, 125 C 560V, 125 C 560V, 125 C EN 61051-1 EN 61051-2 EN 61051-2-2 EN 61051-1 EN 61051-2 EN 61051-2-2 EN 61051-1 EN 61051-2 EN 61051-2-2 40027827 40027827 40027827 XUEW-ULx 130 C -- ULE192838 B5G3600 Φ5,5*6 UL UL E337906 SE CY CD-Series Max.4700pF; Min.250V; Min.125 C Max.4700pF; Min.250V; Min.125 C Max.4700pF; Min.250V; Min.125 C EN 60384-14 EN 60384-14 EN 60384-14 40020002 40008912 40025754 TRF No. IEC62560A
age 21 of 30 Report No.: 17038598 001 IEC 62560 Clause Requirement + Test Result - Remark Verdict Haohua Electronic Co. CT 7 L2 winding Xiamen Wanming Electronics Co., HESHAN JIANGCI WIRE & CABLE CO LTD HJ/CK/UK Max.4700pF; Min.250V; Min.125 C Max.4700pF; Min.250V; Min.125 C EN 60384-14 EN 60384-14 40003902 40034438 XUEW-ULx 130 C -- UL E192838 L2 tape LEO & CO LTD 1801 130 C -- UL E126174 MOV4 L3 winding Brightking (Shenzhen) Co., Ltd. HESHAN JIANGCI WIRE & CABLE CO LTD 10D561K 560V, 125 C EN 61051-1 EN 61051-2 EN 61051-2-2 40027827 XUEW-ULx 130 C -- UL E192838 L4 winding HESHAN JIANGCI WIRE & CABLE CO LTD XUEW-ULx 130 C -- UL E192838 L4 bobbin SUMITOMO BAKELITE CO LTD M-9820 150 C, V-0 -- UL E41429 L4 tape.leo &CO(BC) LTD 1801 130 C -- UL E126174 L7 winding HESHAN JIANGCI WIRE & CABLE CO LTD XUEW-ULx 130 C -- UL E192838 T1 primary winding T1 secondary winding T1 bobbin HESHAN JIANGCI WIRE & CABLE CO LTD Furukawa Electric Co., Ltd. SUMITOMO BAKELITE CO LTD XUEW-ULx 130 C -- UL E192838 TEX-E 130 C -- 006735 M-9820 150 C, V-0 -- UL E41429 T1 tape.leo &CO(BC) LTD 1801 130 C -- UL E126174 T1 tube LEO & CO LTD 2T-TFL 200 C,150V -- UL E176865 Optocoupler U3 Everlight Electronics Co Ltd EL817 Reinforced insulation, 100 C dti=0,5mm, int.dcr=6,0mm ext.dcr=7,7mm -- 132249 TRF No. IEC62560A
age 22 of 30 Report No.: 17038598 001 IEC 62560 Clause Requirement + Test Result - Remark Verdict Bright Led Electronics Corp Fairchild Semiconductor Corp Sharp Corporation Electronic Components Group Lite-On Technology Corp Cosmo Electronics Corps Shenzhen Orient Components Co. Ltd. CY3, CY3-1 Success Electronics SE Hsuan Tai Electronics Co., Ltd. Shantou High-New Technology Developmnt Zone Songtian Enterprise Co Ltd BC-817 FOD817C C817 LTV-817 K1010 ORC-817 CY CD-Series Reinforced insulation, 100 C -- dti=0,5mm, int.dcr=6,0mm ext.dcr=7,7mm Reinforced insulation, 100 C -- dti=0,5mm, int.dcr=6,0mm ext.dcr=7,7mm Reinforced insulation, 100 C -- dti=0,5mm, int.dcr=6,0mm ext.dcr=7,7mm Reinforced insulation, 100 C -- dti=0,5mm, int.dcr=6,0mm ext.dcr=7,7mm Reinforced insulation, 100 C -- dti=0,5mm, int.dcr=6,0mm ext.dcr=7,7mm Reinforced insulation, 100 C -- dti=0,5mm, int.dcr=6,0mm ext.dcr=7,7mm Max.4700pF; Min.400V; Min.125 C Max.4700pF; Min.400V; Min.125 C Max.4700pF; Min.400V; Min.125 C EN 60384-14 EN 60384-14 EN 60384-14 40007240 40026857 40008087 40015248 101347 40029733 40020002 40008912 40025754 TRF No. IEC62560A
age 23 of 30 Report No.: 17038598 001 IEC 62560 Clause Requirement + Test Result - Remark Verdict Haohua Electronic Co. CT 7 L8 winding L9 winding Xiamen Wanming Electronics Co., HESHAN JIANGCI WIRE & CABLE CO LTD HESHAN JIANGCI WIRE & CABLE CO LTD HJ/CK/UK LED chip Samsung Electronics SMWHT221MD5 Max.4700pF; Min.400V; Min.125 C Max.4700pF; Min.400V; Min.125 C -- -- 40003902 40034438 XUEW-ULx 130 C -- ULE192838 XUEW-ULx 130 C -- ULE192838 3V, 100 ma, 0,3 W, 2700-7000K, white light Supplementary information: 1) rovided evidence ensures the agreed level of compliance. See OD-CB2039. -- Tested with appliance TRF No. IEC62560A
age 24 of 30 Report No.: 17038598 001 Annex 2 ATTACHMENT TO TEST REORT IEC 62560 EUROEAN GROU DIFFERENCES AND NATIONAL DIFFERENCES Self-Ballasted LED-Lamp for general lighting services by voltage > 50V Safety specifications CENELEC COMMON MODIFICATIONS (EN) Lamps with E11, E12, E17, E26 are excluded from this standard Delete from the contents page the line on Annex B. Delete from Clause 5.2 the item a). Include in Clause 14 the Corrigendum January 2012. Delete Annex B. N/A N/A N/A ZB ANNEX ZB, SECIAL NATIONAL CONDITIONS (EN) No special National conditions N/A ZC ANNEX ZC, NATIONAL DEVIATIONS (EN) No National deviations N/A
age 25 of 30 Report No.: 17038598 001 Annex 3 Cap temperature rise and heating test Type reference... : IDO-801-10W Test condition Cap upward test voltage... : 277 V Supply wattage (W)... : 9,8 W Supply current (A)... : 0,098 A Mounting position... : Cap upward; Frequency (Hz)... : 50/60Hz Table: measured temperatures corrected for ta = 40 C: temperature ( C/K) of part Test value Result limit Cap(E27) 9,7K -- 120 K lastic cap inside 59,4 C -- Ref. Supply internal wire 63,1 C -- 90 C L1 winding 76,0 C -- 120 C L2 winding 71,7 C -- 120 C L3 winding 74,4 C -- 85 C Ambient temperature of CX1 71,8 C -- 85 C Ambient temperature of MOV1 78,6 C -- 85 C Ambient temperature of C1 78,2 C -- 105 C Ambient temperature of CY1 73,7 C -- 85 C T1 primary winding 88,0 C -- 110 C T1 Bobbin 87,6 C -- Ref. T1 secondary winding 86,8 C -- 110 C CB close T1 79,1 C -- 130 C Ambient temperature of C3 84,4 C -- 105 C Output wire of LED driver 79,1 C -- 200 C LED module substrate CB 77,3 C -- 130 C LED module side CB 65,5 C -- 130 C LED module top CB 64,3 C -- 130 C LED cover side 48,3 C -- Ref. LED cover top 60,6 C -- Ref.
age 26 of 30 Report No.: 17038598 001 Annex 3 Cap temperature rise and heating test Type reference... : IDO-801-22W Test condition Cap upward test voltage... : 277 V Supply wattage (W)... : 22,2 W Supply current (A)... : 0,223 A Mounting position... : Cap upward; Frequency (Hz)... : 50/60Hz Table: measured temperatures corrected for ta = 40 C: temperature ( C/K) of part Test value Result limit Cap(E27) 16,3K -- 120 K lastic cap inside 71,6 C -- Ref. Supply internal wire 79,7 C -- 105 C L1 winding 80,5 C -- 120 C L1 Bobbin 79,2 C -- Ref. L2 winding 91,5 C -- 120 C L2 Bobbin 86,8 C -- Ref. L3 winding 90,7 C -- 120 C Ambient temperature of CX1 88,0 C -- 110 C Ambient temperature of ZRV1 95,1 C -- 125 C Ambient temperature of C1 95,1 C -- 105 C T1 primary winding 107,8 C -- 120 C T1 Bobbin 102,3 C -- Ref. T1 secondary winding 97,3 C -- 120 C CB close T1 105,8 C -- Ref. Ambient temperature of CY1 93,0 C -- 125 C L4 winding 79,3 C -- 130 C Ambient temperature of C11 86,6 C -- 105 C Output wire of LED driver 80,3 C -- 200 C LED module substrate CB 77,1 C -- 130 C LED module side CB 77,5 C -- 130 C LED module top CB 76,1 C -- 130 C LED cover side 61,4 C -- Ref. LED cover top 69,1 C -- Ref.
age 27 of 30 Report No.: 17038598 001 Annex 3 Cap temperature rise and heating test Type reference... : IDO-802-54W Test condition Cap upward test voltage... : 277 V Supply wattage (W)... : 54,1 W Supply current (A)... : 0,553 A Mounting position... : Cap upward; Frequency (Hz)... : 50/60Hz Table: measured temperatures corrected for ta = 40 C: temperature ( C/K) of part Test value Result limit Cap(E27) 21,4K -- 120 K lastic cap inside 81,7 C -- Ref. Supply internal wire 91,1 C -- 105 C L1 winding 97,1 C -- 120 C L1 Bobbin 92,7 C -- Ref. Ambient temperature of RV1 103,6 C -- 125 C L2 winding 94,3 C -- 120 C L2 Bobbin 92,5 C -- Ref. Ambient temperature of CX2 97,7 C -- 110 C Ambient temperature of C1 99,3 C -- 105 C Ambient temperature of RV2 97,9 C -- 125 C L4 winding 104,7 C -- 120 C T1 primary winding 108,8 C -- 120 C T1 Bobbin 105,7 C -- Ref. T1 secondary winding 107,7 C -- 120 C CB close T1 106,2 C -- Ref. Ambient temperature of CY1 101,5 C -- 125 C Ambient temperature of C13 92,6 C -- 105 C Ambient temperature of C14 91,5 C -- 105 C L5 winding 90,2 C -- 120 C Output wire of LED driver 89,0 C -- 200 C LED module substrate CB 81,1 C -- 130 C LED module side CB 81,9 C -- 130 C LED module top CB 82,6 C -- 130 C LED cover side 70,1 C -- Ref. LED cover top 75,3 C -- Ref.
age 28 of 30 Report No.: 17038598 001 Annex 3 Cap temperature rise and heating test Type reference... : IDO-803-120W Test condition Cap upward test voltage... : 277 V Supply wattage (W)... : 127,5W Supply current (A)... : 1,273 A Mounting position... : Cap upward; Frequency (Hz)... : 50/60Hz Table: measured temperatures corrected for ta = 40 C: temperature ( C/K) of part Test value Result limit Cap(E40) 22,8K -- 120 K lastic cap inside 74,8 C -- Ref. Supply internal wire 97,1 C -- 105 C Ambient temperature of MOV5 101,5 C -- 125 C Ambient temperature of C2 91,9 C -- 100 C LF1 winding 108,3 C -- 120 C LF1 bobbin 104,8 C -- Ref. Ambient temperature of C1 98,9 C -- 100 C Ambient temperature of MOV1 99,2 C -- 125 C Ambient temperature of MOV2 85,4 C -- 125 C Ambient temperature of MOV3 88,8 C -- 125 C L5 winding 97,4 C -- 120 C Ambient temperature of CY1 92,6 C -- 125 C Ambient temperature of CY1-1 94,4 C -- 125 C Ambient temperature of CY2 91,5 C -- 125 C Ambient temperature of CY2-1 91,2 C -- 125 C L2 winding 104,7 C -- 130 C Ambient temperature of MOV4 109,6 C -- 125 C Ambient temperature of C9 100,6 C -- 105 C L3 winding 116,8 C -- 120 C L4 winding 116,5 C -- 120 C L7 winding 116,6 C -- 130 C T1 primary winding 117,6 C -- 120 C T1 Bobbin 111,7 C -- Ref. T1 secondary winding 112,2 C -- 120 C CB close T1 112,4 C -- Ref. Ambient temperature of CY3 102,4 C -- 125 C U3 body 97,3 C -- 100 C L8 winding 104,2 C -- 130 C
age 29 of 30 Report No.: 17038598 001 L9 winding 107,5 C -- 130 C Ambient temperature of C35 99,4 C -- 105 C Output wire of LED driver 97,1 C -- 200 C LED module substrate CB 93,1 C -- 130 C LED module side CB 94,9 C -- 130 C LED module top CB 93,8 C -- 130 C LED cover side 82,4 C -- Ref. LED cover top 73,4 C -- Ref.
age 30 of 30 Report No.: 17038598 001 Annex 4 hotobiological safety of lamps and lamp systems were evaluated according to standard EN 62471: 2008 and EU Directive 2006/25/EC. Exempt Group, these classifications apply to all models Exempt Group for IDO-803-120W with CCT. 7000K. Optical hazard Test result Used hazard exposure limit Ref. E s 5,962E-05 W/m 2 0,001 W/m 2 200-400 nm E UVA 2, 746E-03 W/m 2 0,33 W/m 2 315-400 nm L B 4,441E+01 W/m 2 sr 100 W/m 2 sr 300-700 nm E B (small source) - - 300-700 nm N/A L R 1,703E+03 W/m 2 sr 3,770E+05 W/m 2 sr 380-1400 nm L IR 2,428E-01 W/m 2 sr 8,078E+04 W/m 2 sr 780-1400 nm E IR 1,163E-03 W/m 2 100 W/m 2 780-3000 nm E H 1,701E+00 W/m 2 3556,56 W/m 2 380-3000 nm
ATTACHMENT hoto Documentation age 1 of 21 Report No.: 17038598 001 roduct: LED corn bulb Type Designation: See certificate icture 1: Whole view of IDO-803-120W icture 2: End view of IDO-803-120W
ATTACHMENT hoto Documentation age 2 of 21 Report No.: 17038598 001 roduct: LED corn bulb Type Designation: See certificate icture 3: Internal view of IDO-803-120W icture 4: Internal view of IDO-803-120W
ATTACHMENT hoto Documentation age 3 of 21 Report No.: 17038598 001 roduct: LED corn bulb Type Designation: See certificate icture 5: Driver bottom view of IDO-803-120W icture 6: Transformer top view of IDO-803-120W
ATTACHMENT hoto Documentation age 4 of 21 Report No.: 17038598 001 roduct: LED corn bulb Type Designation: See certificate icture 7: Transformer bottom view of IDO-803-120W icture 8: Transformer dismantle view, bottom core wrapped tape
ATTACHMENT hoto Documentation age 5 of 21 Report No.: 17038598 001 roduct: LED corn bulb Type Designation: See certificate icture 9: rimary side view and added tube on winding start icture 10: Secondary side view and added tube on winding start
ATTACHMENT hoto Documentation age 6 of 21 Report No.: 17038598 001 roduct: LED corn bulb Type Designation: See certificate icture 11: Whole view of IDO-802-54W-E40 icture 12: End view of IDO-802-54W-E40
ATTACHMENT hoto Documentation age 7 of 21 Report No.: 17038598 001 roduct: LED corn bulb Type Designation: See certificate icture 13: Internal view of IDO-802-54W-E40(potted) icture 14: Internal view of IDO-802-54W-E40 not potted
ATTACHMENT hoto Documentation age 8 of 21 Report No.: 17038598 001 roduct: LED corn bulb Type Designation: See certificate icture 15: LED driver top view of IDO-802-54W-E40 icture 16: LED driver bottom view of IDO-802-54W-E40
ATTACHMENT hoto Documentation age 9 of 21 Report No.: 17038598 001 roduct: LED corn bulb Type Designation: See certificate icture 17: Transformer top view of IDO-802-54W-E40 icture 18: Transformer bottom view of IDO-802-54W-E40
ATTACHMENT hoto Documentation age 10 of 21 Report No.: 17038598 001 roduct: LED corn bulb Type Designation: See certificate icture 19: Transformer innermost layer winding view of IDO-802-54W-E40 icture 20: Transformer secondary winding view of IDO-802-54W-E40
ATTACHMENT hoto Documentation age 11 of 21 Report No.: 17038598 001 roduct: LED corn bulb Type Designation: See certificate icture 21: Whole view of IDO-801-22W icture 22: End view of IDO-801-22W
ATTACHMENT hoto Documentation age 12 of 21 Report No.: 17038598 001 roduct: LED corn bulb Type Designation: See certificate icture 23: Inside view of IDO-801-22W icture 24: Inside view of IDO-801-22W without potting material
ATTACHMENT hoto Documentation age 13 of 21 Report No.: 17038598 001 roduct: LED corn bulb Type Designation: See certificate icture 25: Inside view of IDO-801-22W icture 26: LED driver CB top view of IDO-801-22W
ATTACHMENT hoto Documentation age 14 of 21 Report No.: 17038598 001 roduct: LED corn bulb Type Designation: See certificate icture 27: LED driver CB bottom view of IDO-801-22W icture 28: Transformer top view of IDO-801-22W
ATTACHMENT hoto Documentation age 15 of 21 Report No.: 17038598 001 roduct: LED corn bulb Type Designation: See certificate icture 29: Transformer bottom view of IDO-801-22W icture 30: Transformer innermost layer winding view of IDO-801-22W
ATTACHMENT hoto Documentation age 16 of 21 Report No.: 17038598 001 roduct: LED corn bulb Type Designation: See certificate icture 31: Secondary winding view of IDO-801-22W icture 32: Whole view of IDO-801-10W
ATTACHMENT hoto Documentation age 17 of 21 Report No.: 17038598 001 roduct: LED corn bulb Type Designation: See certificate icture 33: End view of IDO-801-10W icture 34: Inside view of IDO-801-10W
ATTACHMENT hoto Documentation age 18 of 21 Report No.: 17038598 001 roduct: LED corn bulb Type Designation: See certificate icture 35: Inside view of IDO-801-10W without potting material icture 36: Inside view of IDO-801-10W
ATTACHMENT hoto Documentation age 19 of 21 Report No.: 17038598 001 roduct: LED corn bulb Type Designation: See certificate icture 37: LED driver CT top view of IDO-801-10W icture 38: LED driver CB bottom view of IDO-801-10W
ATTACHMENT hoto Documentation age 20 of 21 Report No.: 17038598 001 roduct: LED corn bulb Type Designation: See certificate icture 39: Transformer top view of IDO-801-10W icture 40: Bottom view of IDO-801-10W
ATTACHMENT hoto Documentation age 21 of 21 Report No.: 17038598 001 roduct: LED corn bulb Type Designation: See certificate icture 41: rimary side winding view of IDO-801-10W icture 42: Transformer secondary side view of IDO-801-10W