OPERATIONAL DOCUMENT ENEC 330 European Standards moved from the Low Voltage Directive to the Machine Directive Approved by: Administrative document Nr of pages: 10 Date of issue: September 2011 Supersedes: New document Page 1 of 10 EEPCA, the European Electrical Products Certification Association 142, rue du Faubourg Saint-Denis F-75010 Paris Tel/fax: +33 140373563 Email: secretariat@eepca.org Document issued and distributed by EEPCA EEPCA 2011 all rights reserved
European Standards moved from the Low Voltage Directive to the Machine Directive As decided by the ECS General Meeting of 12-13 April 2011, this OD gives for information purposes the list of ENs that are being moved from the Low Voltage Directive to the Machine Directive. Notes: I. The list is provisional and subject to confirmation. II. ENEC certification for these ENs may continue in the normal way, however without mentioning the LVD in the Licence. OD ENEC 330 - September 2011 page 2 of 10
8.4.2011 Official Journal of the European Union C 110/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework of the implementation of the Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast) (Text with EEA relevance) (Publication of titles and references of harmonised s under the directive) (2011/C 110/01) Reference and title of the harmonised First OJ CEN EN 81-3:2000+A1:2008 Safety rules for the construction and installation of lifts Part 3: Electric and hydraulic service lifts 8.9.2009 EN 81-3:2000+A1:2008/AC:2009 CEN EN 81-31:2010 Safety rules for the construction and installation of lifts Lifts for the transport of goods only Part 31: Accessible goods only lifts CEN EN 81-40:2008 Safety rules for the construction and installation of lifts Special lifts for the transport of persons and goods Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility 8.9.2009 CEN EN 81-41:2010 Safety rules for the construction and installation of lifts Special lifts for the transport of persons and goods Part 41: Vertical lifting platforms intended for use by persons with impaired mobility CEN EN 81-43:2009 Safety rules for the construction and installation of lifts Special lifts for the transport of persons and goods Part 43: Lifts for cranes 8.9.2009 CEN EN 115-1:2008+A1:2010 Safety of escalators and moving walks Part 1: Construction and installation 26.5.2010 EN 115-1:2008 Note 2.1 Date expired (30.9.2010)
8.4.2011 Official Journal of the European Union C 110/51 Reference and title of the harmonised First OJ EN 50348:2010/AC:2010 Cenelec EN 60204-1:2006 Safety of machinery Electrical equipment of machines Part 1: General requirements IEC 60204-1:2005 (Modified) 26.5.2010 EN 60204-1:2006/A1:2009 IEC 60204-1:2005/A1:2008 26.5.2010 Note 3 1.2.2012 EN 60204-1:2006/AC:2010 Cenelec EN 60204-11:2000 Safety of machinery Electrical equipment of machines Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kv IEC 60204-11:2000 26.5.2010 EN 60204-11:2000/AC:2010 Cenelec EN 60204-32:2008 Safety of machinery Electrical equipment of machines Part 32: Requirements for hoisting machines IEC 60204-32:2008 Cenelec EN 60335-1:2002 Household and similar electrical appliances Safety Part 1: General requirements IEC 60335-1:2001 (Modified) EN 60335-1:2002/A11:2004 Note 3 EN 60335-1:2002/A1:2004 IEC 60335-1:2001/A1:2004 Note 3 EN 60335-1:2002/A12:2006 Note 3 EN 60335-1:2002/A13:2008 Note 3 EN 60335-1:2002/A14:2010 Note 3 EN 60335-1:2002/AC:2009 EN 60335-1:2002/AC:2010 Cenelec EN 60335-2-67:2009 Household and similar electrical appliances Safety Parts 2-67: Particular requirements for floor treatment and floor cleaning machines for commercial use IEC 60335-2-67:2002 (Modified) + A1:2005 (Modified)
C 110/52 Official Journal of the European Union 8.4.2011 Reference and title of the harmonised First OJ Cenelec EN 60335-2-68:2009 Household and similar electrical appliances Safety Parts 2-68: Particular requirements for spray extraction machines for commercial use IEC 60335-2-68:2002 (Modified) + A1:2005 (Modified) + A2:2007 (Modified) Cenelec EN 60335-2-69:2009 Household and similar electrical appliances Safety Parts 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use IEC 60335-2-69:2002 (Modified) + A1:2004 (Modified) + A2:2007 (Modified) Cenelec EN 60335-2-72:2009 Household and similar electrical appliances Safety Parts 2-72: Particular requirements for automatic machines for floor treatment for commercial use IEC 60335-2-72:2002 (Modified) + A1:2005 (Modified) Cenelec EN 60335-2-77:2010 Safety of household and similar appliances Parts 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers IEC 60335-2-77:2002 (Modified) Cenelec EN 60335-2-79:2009 Household and similar electrical appliances Safety Parts 2-79: Particular requirements for high pressure cleaners and steam cleaners IEC 60335-2-79:2002 (Modified) + A1:2004 (Modified) + A2:2007 (Modified) Cenelec EN 60745-1:2009 Hand-held motor-operated electric tools Safety Part 1: General requirements IEC 60745-1:2006 (Modified) EN 60745-1:2009/A11:2010 Note 3 1.10.2013 EN 60745-1:2009/AC:2009 Cenelec EN 60745-2-1:2010 1: Particular requirements for drills and impact drills IEC 60745-2-1:2003 (Modified) + A1:2008 Cenelec EN 60745-2-2:2010 2: Particular requirements for screwdrivers and impact wrenches IEC 60745-2-2:2003 (Modified) + A1:2008
8.4.2011 Official Journal of the European Union C 110/53 Reference and title of the harmonised First OJ Cenelec EN 60745-2-4:2009 4: Particular requirements for sanders and polishers other than disk type IEC 60745-2-4:2002 (Modified) + A1:2008 (Modified) 26.5.2010 Cenelec EN 60745-2-5:2010 5: Particular requirements for circular saws IEC 60745-2-5:2010 (Modified) Cenelec EN 60745-2-6:2010 6: Particular requirements for hammers IEC 60745-2-6:2003 (Modified) + A1:2006 + A2:2008 Cenelec EN 60745-2-8:2009 8: Particular requirements for shears and nibblers IEC 60745-2-8:2003 (Modified) + A1:2008 Cenelec EN 60745-2-9:2009 9: Particular requirements for tappers IEC 60745-2-9:2003 (Modified) + A1:2008 Cenelec EN 60745-2-11:2010 11: Particular requirements for reciprocating saws (jig and sabre saws) IEC 60745-2-11:2003 (Modified) + A1:2008 Cenelec EN 60745-2-12:2009 12: Particular requirements for concrete vibrators IEC 60745-2-12:2003 (Modified) + A1:2008 Cenelec EN 60745-2-13:2009 13: Particular requirements for chain saws IEC 60745-2-13:2006 (Modified) Cenelec EN 60745-2-14:2009 14: Particular requirements for planers IEC 60745-2-14:2003 (Modified) + A1:2006 (Modified) EN 60745-2-14:2009/A2:2010 IEC 60745-2-14:2003/A2:2010 Note 3 1.6.2013 Cenelec EN 60745-2-15:2009 15: Particular requirements for hedge trimmers IEC 60745-2-15:2006 (Modified)
C 110/54 Official Journal of the European Union 8.4.2011 Reference and title of the harmonised First OJ Cenelec EN 60745-2-16:2010 16: Particular requirements for tackers IEC 60745-2-16:2008 (Modified) Cenelec EN 60745-2-17:2010 17: Particular requirements for routers and trimmers IEC 60745-2-17:2010 (Modified) Cenelec EN 60745-2-18:2009 18: Particular requirements for strapping tools IEC 60745-2-18:2003 (Modified) + A1:2008 Cenelec EN 60745-2-19:2009 19: Particular requirements for jointers IEC 60745-2-19:2005 (Modified) EN 60745-2-19:2009/A1:2010 IEC 60745-2-19:2005/A1:2010 Note 3 1.6.2013 Cenelec EN 60745-2-20:2009 20: Particular requirements for band saws IEC 60745-2-20:2003 (Modified) + A1:2008 Cenelec EN 60745-2-21:2009 21: Particular requirements for drain cleaners IEC 60745-2-21:2002 (Modified) Cenelec EN 61029-1:2009 Safety of transportable motor-operated electric tools Part 1: General requirements IEC 61029-1:1990 (Modified) EN 61029-1:2009/A11:2010 Note 3 1.11.2013 EN 61029-1:2009/AC:2009 Cenelec EN 61029-2-1:2010 2-1: Particular requirements for circular saw benches IEC 61029-2-1:1993 (Modified) + A1:1999 + A2:2001 Cenelec EN 61029-2-6:2010 2-6: Particular requirements for diamond drills with water supply IEC 61029-2-6:1993 (Modified)
8.4.2011 Official Journal of the European Union C 110/55 Reference and title of the harmonised First OJ Cenelec EN 61029-2-8:2010 2-8: Particular requirements for single spindle vertical moulders IEC 61029-2-8:1995 (Modified) + A1:1999 + A2:2001 Cenelec EN 61029-2-9:2009 2-9: Particular requirements for mitre saws IEC 61029-2-9:1995 (Modified) Cenelec EN 61029-2-10:2010 2-10: Particular requirements for cutting-off grinders IEC 61029-2-10:1998 (Modified) Cenelec EN 61029-2-11:2009 2-11: Particular requirements for combined mitre and bench saws IEC 61029-2-11:2001 (Modified) Cenelec EN 61310-1:2008 Safety of machinery Indication, marking and actuation Part 1: Requirements for visual, acoustic and tactile signals IEC 61310-1:2007 Cenelec EN 61310-2:2008 Safety of machinery Indication, marking and actuation Part 2: Requirements for marking IEC 61310-2:2007 Cenelec EN 61310-3:2008 Safety of machinery Indication, marking and actuation Part 3: Requirements for the location and operation of actuators IEC 61310-3:2007 Cenelec EN 61496-1:2004 Safety of machinery Electro-sensitive protective equipment Part 1: General requirements and tests IEC 61496-1:2004 (Modified) 26.5.2010 EN 61496-1:2004/A1:2008 IEC 61496-1:2004/A1:2007 26.5.2010 Note 3 1.6.2011 EN 61496-1:2004/AC:2010 Cenelec EN 61800-5-2:2007 Adjustable speed electrical power drive systems Parts 5-2: Safety requirements Functional IEC 61800-5-2:2007
C 110/56 Official Journal of the European Union 8.4.2011 Reference and title of the harmonised First OJ Cenelec EN 62061:2005 Safety of machinery Functional safety of safety-related electrical, electronic and programmable electronic control systems IEC 62061:2005 26.5.2010 EN 62061:2005/AC:2010 ( 1 ) ESO: European Standards Organisation: CEN: Avenue Marnix 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË, Tel. +32 25500811; Fax +32 25500819 (http://www.cen.eu), Cenelec: Avenue Marnix 17, 1000 Bruxelles/Brussel, BELGIQUE/BELGIË, Tel. +32 25196871; Fax +32 25196919 (http://www.cenelec.eu), ETSI: 650 route des Lucioles, 06921 Sophia Antipolis, FRANCE, Tel. +33 492944200; Fax +33 493654716 (http://www.etsi.eu). : Generally the date of cessation of conformity will be the date of withdrawal ( dow ), set by the European Standardisation Organisation, but attention of users of these s is drawn to the fact that in certain exceptional cases this can be otherwise. Note 2.1: The new (or amended) has the same scope as the superseded. On the date stated, the superseded ceases to give conformity with the essential requirements of the directive. Note 2.2: The new has a broader scope than the superseded. On the date stated the superseded ceases to give conformity with the essential requirements of the directive. Note 2.3: The new has a narrower scope than the superseded. On the date stated the (partially) superseded ceases to give conformity with the essential requirements of the directive for those products that fall within the scope of the new. Presumption of conformity with the essential requirements of the directive for products that still fall within the scope of the (partially) superseded, but that do not fall within the scope of the new, is unaffected. Note 3: In case of amendments, the referenced is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded (column 3) therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded ceases to give conformity with the essential requirements of the directive. NOTE: Any information concerning the availability of the s can be obtained either from the European Standardisation Organisations or from the national isation bodies of which the list is annexed to the Directive 98/34/EC of the European Parliament and Council ( 1 ) amended by the Directive 98/48/EC ( 2 ). Harmonised s are adopted by the European Standardisation Organisations in English (CEN and Cenelec also published in French and German). Subsequently, the titles of the harmonised s are translated into all other required official languages of the European Union by the National Standards Bodies. The European Commission is not responsible for the correctness of the titles which have been presented for in the Official Journal. Publication of the references in the Official Journal of the European Union does not imply that the s are available in all the Community languages. ( 1 ) OJ L 204, 21.7.1998, p. 37. ( 2 ) OJ L 217, 5.8.1998, p. 18.
8.4.2011 Official Journal of the European Union C 110/57 This list replaces all the previous lists published in the Official Journal of the European Union. The Commission ensures the updating of this list. More information about harmonised s on the Internet at: http://ec.europa.eu/enterprise/policies/european-s/harmonised-s/index_en.htm