Samplers Measuring Stations since 1996 Made in WaterSam WS 316 Premium class WS 316 - MMS Measuring Station WS 312 Compact class
Bottles and Distributors WS 312 WS 316 X-Y Direct Distributor Basic devices for all variations Stainless steel housing AISI 304, with extra charge AISI 316Ti Strong cooling unit, inside compartment + 4 C ±1 at an ambient temperature of -25 C to +42 C Highly efficient insulation of 40 mm. Double door sealing (no cold bridges) Electronics, pneumatic system and machines in separate compartments. 9 programs (linkable) Storage of error messages. Data logger (option). With retentive memory. Complete software is standard Dosing systems for all sampling requirements. Immediate spare parts delivery. Top service. Remote control or remote diagnosis via GSM modem resp. GSM/GPRS modem (option). Interface RS 232 or 485 (series) WS 312 Distributors and Bottle Combinations WS 316 Distributors and Bottle Combinations 36 x 1.0 litre 24 x 2.0 litres 16 x 2.9 litres 12 x 2.9 litres 12 x 1.0 + 1 x 10.4 litres 24 x 1.0 litre 12x1.0+7x2.0litres 5 x 12.0 litres 4 x 12.0 litres 4 x 25.0 litres 4 x 12.0 litres 16 x 2.0 litres 12 x 2.9 litres + 12.0 litres Telescope drawer 24x2Lbottles self-emptying 10.4 litres 26.4 litres 26.4 litres 54.0 litres 60.0 litres
Dosing Systems and Pumps The optimum system for every application Vacuum dosing system VAC with fixed volume To be set from 20-350 ml resp. 20-200 ml Suitable for dirty to very dirty waste waster Vacuum dosing system VAR with variable volume To be set from 20-200 ml resp. 20-120 ml Suitable for dirty to very dirty waste water WaterSam Patent DE 19832862 Fixed volume water switch FMWW Dosing system INLINECUT with fixed volume Selection of 20 / 36 / 54 ml. For sampling out of pressurised pipes. Suitable for dirty to very dirty waste water and sludge. Max. pipe pressure: 6 bar Dosing system INLINEVENT with fixed volume To be set from 20-100 ml For sampling out of pressurised pipes. Suitable for mechanically cleaned waste water or for river water without abrasive particles. Max. pipe pressure: 6 bar Peristaltic pump PP Dosing volume to be set from 20-350 ml Dosing volume to be set from 20-9999 ml Accuracy ±5 ml or ±5% of the set value. Suitable for mechanically cleaned waste water or for river water. Large vacuum-pressure pump Suction height: 6 m Small vacuum-pressure pump Capacity 19 litres/min with back pressure zero. Capacity 9 litres/min with back pressure zero. Suction height: 8m Maximum pressure: 7 bar Suction height: 6m Maximum pressure: 1 bar Pressure suction probes VacuPress VP13 and VP30 Eccentric screw pump VP13 Suction height: 13 m VP30 Suction height: 30 m Capacity Suction: Pressure: 20 litres/min - 0.2 bar 1.0 bar
Stationary WS 316-16 GMS Sampler and measuring station with flow chamber for electrodes. Measurement of turbidity, ph, redox, ox ygen, conductivity WS 316-24 SE and temperature etc. Self-emptying sampler Eccentric screw pump in raised base with8/16/ 24 x2litre glass bottles and (Extra: Bottles made of borosilicate glass ) fully automatic rinsing with clean water (Standard: Bottles made of borosilicate glass ) WS 316-2x5 SE or 2x10 SE Self-emptying sampler with 2 x 5 litre or 2 x10 litre PE composite containers and fully automatic rinsing with clean water WS 316-35 FAEKO Faeces sampler with 35 x 1 litre PE bottles and fully automatic rinsing with clean water. Applicable for monitoring of faeces discharge from tank trucks.
Portable WS Porti 12 Vacuum system 12 x 1 litre PE or 12 x 0.9 litre glass bottles or 6.4 litre PE composite container WS Porti 12 T Vacuum system Compressor cooling to +4 C Permissible outside temperature: 0 to +55 C 12 x 1 litre PE or 12 x 0.9 litre glass bottles or 10.4 litre composite container WS Porti Ex ATEX for Zone 1 Peristaltic pump 12 x 1 litre PE bottles or 12 x 0.5 litre glass bottles or 10 litre composite container WS Porti 24 T Vacuum system Compressor cooling to +4 C Permissible outside temperature: 0 to +55 C 24 x 1 litre PE or 24 x 0.9 litre glass bottles or 4 x 6.4 litre composite container WS Porti 24 Vacuum system 24 x 1 litre PE or 24 x 0.9 litre glass bottles or 10.4 litre PE composite container
Projects Netherlands Channel monitoring Pumping station Outlet waste water treatment plant Belgium Inflow waste water treatment plant
Worldwide Waste water treatment plant in a German city England Chemical plant Italy Waste water community Finland Refinery
WaterSam Samplers World wide remote control with GSM modem or GSM/GPRS modem WaterSam Felix-Wankel-Strasse 70 72108 Rottenburg am Neckar GmbH & Co.KG Supplied by: Telephone Fax E-mail Internet +49 (0)7472 9882 0 +49 (0)7472 9882 22 info@watersam.de www.watersam.com