Table of contents Index Flange Insulation 2
GF iping Systems Flange Insulation
Disclaimer Information in the catalog GF Central lastics is as diligent as possible in compiling and updating the information in its catalog. However, GF Central lastics does not guarantee the correctness and completeness of the information provided in its catalog. Equally, GF Central lastics does not guarantee that this information is up to date. Drawings dimensions and weights, unless otherwise noted by tolerances, should be considered for reference only and may not reflect the exact physical measurements of the parts. For questions concerning our products, their specifications and their utilization please contact your local Regional Sales anager or Customer Service Representative of GF Central lastics. For comments concerning the product catalog, please email gfcentralmarketing@georgfischer.com.
Flange Connection Insulation: Overview Flange Insulation Gasket Types Gaskets are used to create a static compression seal between two stationary members of a mechanical assembly and to maintain that seal under operating conditions which may vary dependent upon changes in pressures and temperatures. In 960, Central lastics made the decision to offer a broader range of isolation products into the cathodic protection industry. Type E Full Face Gaskets GF Central lastics Flange Insulation Gaskets and Insulation Kits are used throughout the world and in numerous industry specific applications. Our Gaskets and Flange Insulation Kits have a proven track record of being one of the most effective and reliable products for controlling and maintaining the integrity of piping systems ever under the most demanding conditions. Gaskets are available individually or in kits. Gasket material includes G, G, itrile-face, lain henolic, G0 and Durlon. Sleeve material includes henolic, ylar, olyethylene, inlon, or omex. Washer materials include henolic, Steel, G, G or G0 available as a single washer and sleeve kit, a one piece washer kit, a double washer kit or a one piece double washer kit (inlon). Full face gaskets completely cover the flange face from flange bed to outside diameter. Full face gaskets are used on flat faced flanges, however, can be used with a raised flat face flange to eliminate debris building up in raised area causing a short. Type F Ring Gasket Ring Gaskets are designed to set inside the bolt circle and are most commonly used with raised face flanges. Type D Ring Type Joint (RTJ) The RTJ is an oval or octagonal phenolic gasket designed to work specifically with RTJ grooved Flanges. RTJ gaskets are sized by R-number.
Flange Connection Insulation: Overview Type D BX Insulating Washers BX gaskets are an octagonal shape phenolic gasket designed to work specifically with a BX grooved flange. An external filler made of / thick Durlon is supplied with each BX whether is be a complete kit or gasket only. BX gaskets are machined from phenolic tubing; therefore, the gas pressure would be perpendicular to the grain, allowing the gasket to withstand pressures up to,000 I. GF Central lastics standard insulating washers are manufactured from CE henolic. The maximum operating temperature is approximately 22 F with a compression strength of 6, I and a dielectric strength of 00 V. Our G and G high temperature insulating washers have a maximum operating temperature of 40 F. Jock O-Ring Type The Jock O-Ring gasket can be a full face (Type E) or ring gasket (Type F) configuration. The Jock has a highenergy O-Ring elastomer seal that compresses and expands to fill any voids as the flange is tightened. The totally encapsulated sealing element prevents gasket blow-out. The O-Ring provides a positive, constant seal with zero environmental leakage. Complete contact of flange and retainer prevents fire failure and reduces exposure of the seal to service fluids and environment. The confined O-Ring seal allows zero m and y factors to be achieved. Available in itrile or Viton seal materials. On special request, the Jock gasket can replace most sizes of RTJ and BX gaskets. With the versatility of changing the sealing element or the retainer material, the and larger Jock gaskets can be utilized in most any application. 2 Insulating Sleeves GF Central lastics offers insulating sleeves in a variety of materials. Our most standard include ylar, High Density olyethylene, and omex. They are designed to easily be inserted in the bolt hole, leaving ample room for the bolt, even when the bolt holes are misaligned. The wall thickness is / and can be provided for bolt sizes from ½ to ½. olded One-iece Sleeve & Washer The one-piece sleeve and washer reduces handling (many loose parts) and make-up problems in the field. One glance and an inspector can easily tell if the flange has been properly insulated. A inlon material should be used because of its high compression strength and superior toughness. A one-piece sleeve and washer is most generally used for one-side flange insulation in that we mold it in a sleeve length, that is on an average, significantly longer than the thickness of a single flange. They can be cut to size for two-side insulation. For bolt sizes ½ ¼ the maximum operating temperature is 20 F, dielectric strength 420 V and compression strength 9,000 I.
How to Order Flange Insulation Kits When talking to your Customer Service Representative, please provide the following information so we can ensure that you are receiving the product that you need: Quantity ipe (ominal) (for sizes larger than 2, the flange ID bore must be specified.) ressure Rating (ASI/ASE, DI, AI and AWWA) (If for ASI/ASE B6.4, Series A or Series B must be specified) Gasket Type (Type E or, Type F, RTJ or BX - see below) Retainer aterial Sealing Element Single or Double Washer Sets (SW or DW) Sleeve aterial Type E Gaskets perfectly center on precisely located bolt holes. Since their outside diameters are the same as the pipe flange diameter, foreign materials is prevented from shorting the flange insulation. Type F Gaskets are made without bolt holes, to fit tightly inside the overall bolt hole circle of the flange faces. The outside diameter of the gasket fits tightly in place assuring a well centered position. Flange Insulation: aterial Legend Abbreviation aterial henolic itrile ylar E olyethylene henolic Sleeve ylar, omex, inlon, and Viton are registered trademarks of E. I. du ont de emours and Company inlon Sleeve J Jock itrile Durlon is a registered trademark of Triangle Fluid Control Ltd. Jock Viton
Flange Insulation: itrile-face and lain henolic Gasket Kits Type E (Full Face) Double Washer Kits Single Washer Kits ipe size ¾ ¼ ½ ½ 0 2 2 2 2 0 4 One iece 0 E E E E E E E E E E E E E E E E E E E E E E E E E E 00 J J J J J J J J J J J J J J J J J J J J J J E E E E E E E E E E E E E E E E E E E E E E E E E J J J J J J J J J J J J J J J J J J J J J E E E E E E E E E E E E E E E E E E E E E E E E E One iece J J J J J J J J J J J J J J J J J J J J J E E E E E E E E E E E E E E E E E E E E E E E E J J J J J J J J J J J J J J J J J J J J E E E E E E E 00 J J J E E E E E E E E E E J J J J J J J J J J E E E J J J E E E E E E E J J J E E E E E E E E E E J J J J J J J J J J E J
Specifications for Flange Connection Insulation: ASA Standard Gaskets: B6.2 0 CLASS 00 CLASS Flange (umber) & Ring Gasket of Bolts I.D. O.D (4) ½ 2/ Full Face Gasket RTJ O.D. 4¼ R- Flange (umber) & Ring Gasket of Bolts I.D. O.D (4) / 2/ Full Face Gasket RTJ O.D. 4/ R-6 ¼ (4) ½ ¼ 2/ 4/ ½ (4) ½ ½ / R- ¼ (4) / ¼ / ¼ R-8 R-9 ½ (4) ¾ ½ / 6/ R-20 R-22 (8) / (4) / 4 (4) / 4/ 4 / 6½ R-2 R-2 (8) ¾ ½ (4) / R-26 / ½ R-29 (8) ¾ / 8¼ ½ (8) / R- ½ 6/ 8½ R- ½ (8) ¾ ½ 6/ 9 R-4 (8) / 6/ 9 R-6 (8) ¾ 0 R- (8) ¾ / 0 R-40 (8) ¾ 8 / R-4 (8) ¾ 8/ R-4 (2) ¾ 9/ R-4 (8) ¾ 0/ ½ R-48 (2) / R-49 0 (2) / 0 / R-2 0 (6) 0 4/ ½ R- (2) / 9 R-6 (6) / 6/ 20½ R- (2) / R-9 (20) / ¼ 9 R-6 (6) 20/ R-64 (20) ¼ ¼ 2/ R-6 (6) / 2/ R-68 (24) ¼ 2/ 2 R-69 (20) / 2/ R-2 (24) ¼ 9 2/ 0½ R- 2 (20) ¼ 2 28/ R-6 2 (24) ½ 0/ R- 0 (28) ¼ 0 4 / 8¾ (2) 4 / 0 R-98 (2) ½ 4/ 4 4 (6) 0/ 4 (6) ½ 4 4/ 4 (40) 2/ 4 (44) ½ 4 4 / 9½ CLASS CLASS Flange (umber) & Ring Gasket of Bolts I.D. O.D (4) 2 Full Face Gasket RTJ O.D. 4 R-6 ¼ (4) ¼ ¼ ½ (4) ¾ ½ (8) (8) ¾ Flange (umber) & Ring Gasket of Bolts I.D. O.D (4) 2 Full Face Gasket RTJ O.D. 4 R-6 R-8 ¼ (4) ¼ ¼ R-8 6 R-20 ½ (4) ¾ ½ 6 R-20 4 6½ R-2 (8) 4 6½ R-2 ½ R-26 (8)¾ ½ R-26 (8) 8¼ R- (8)¾ 8¼ R- ½ (8) ½ 6 9 R-4 ½ (8) ½ 6 9 R-4 (8) 6 0 R- (8) 0¾ R- (8) 8 R-4 (8) 9 8 R-4 (2) 9 R-4 (2)¾ 0 R-4 (2) R-49 (2) 2 6½ R-49 0 (6) 0 ½ R- 0 (6) ¼ 9¾ R- (6) ¼ 6 20½ R- (20) ¼ ¾ 2 R- (20) ¼ 8 R-6 (20) 2 9 2¾ R-6 (20) 2 R-6 (20) ½ 4¾ 22 R-6 (24) 2 2 R-69 (20) 6½ 2 29¼ R-69 (24) ½ 8 2 0½ R- (24) 8¼ 26 R- 2 (24) ¾ 22 0 R- 2 (24) 2 R-
Specifications for Flange Connection Insulation: ASE Standard Gaskets: B6.2 CLASS 00 CLASS Flange (umber) & Ring Gasket of Bolts I.D. O.D (4) Full Face Gasket RTJ O.D. R-6 ¼ (4) / 6¼ ½ (4) (8) (8) 2¼ (8) Flange (umber) & Ring Gasket of Bolts I.D. O.D (4) Full Face Gasket RTJ O.D. R-6 R-8 ¼ (4) / 6¼ R-8 R-20 ½ (4) R-20 8½ R-24 (8) 8½ R-24 6/ 9 R-2 (8) 2¼ 6/ 9 R-2 2 6 9½ R- (8) 2¾ 6 0½ R- (8) ½ R- (8) ¼ 8/ 2¼ R-9 (8) ¼ 4¾ 9/ ¾ R-4 (8) ½ 4 9/ 4¾ R-44 (2) ¾ R-4 (2) ½ R-46 (2) ½ 8½ R-49 (2) 9 R-0 0 (6) 9 R- 0 (2) 8¾ R-4 (20) 9 2 R- (6) 0 20/ 26½ R-8 (20) ½ 2¼ 20/ 2¼ R-62 (20) 22 2¾ R-66 (20) ¾ R-0 (20) ½ 2/ ¾ R-4 200 CLASS Flange (umber) & Ring Gasket of Bolts I.D. O.D (4) Full Face Gasket RTJ O.D. 6¼ R-8 ¼ (4) ¼ R-2 ½ (4) 4 R-2 (8) / 9¼ R-26 (8) 2¼ 6 0½ R-28 (8) ¼ 2¾ / R-2 (8) ½ 9/ R-8 (8) ¾ 4 0/ 6½ R-42 (8) 2 / 9 R-4 (2) / 2¾ R- Wall thickness of sleeves: / Thickness of Insulating Washers: / Wall thickness of Washer on ylon Combination Sleeve and Washer: / 6
Flange Insulation: Sleeve Quantity and Length Cross Reference Single Washer Kits SIGLE WASHER KITS ipe ½ (Qty) Diameter Length 0 00 00 (4) ½ (4) ½ (4) ½ (4) ½ (4 ) ¾ (4) ¾ ¾ (4) ½ (4) ½ (4) (4) (4) ¾ 2¾ (4) ¾ 2¾ (4) ½ (4) (4) 2 (4) 2 (4) (4) ¼ (4) ½ ½ (4) ¾ ¾ (4) 2 (4) 2 (4) (4) ½ (4 )½ (4) ¾ (4) ¾ (4) ¾ (4) ¼ (4) ¼ (4) ¾ (8) (8) 2¾ (8) 2¾ (8) ¾ (8) ¾ (4) (8) ¾ 2¼ (8) ¾ (8) ¾ (8) (8) (4) 2 (8) ¾ (8) ¾ ¼ (8 ) ¾ ¼ (8) ¾ (8) 4½ ½ (8) 2 (8) ¾ 2 (8) ½ (8) ½ (8) 2 (8) ¾ 2¾ (8) ½ (8) ¾ (8) 4¼ (8) ¼ (8) ¾ 2 (8) ¾ (8) ¾ (8) 4¼ (8) ¼ 4¾ (8) ½ 6½ (8) ¾ 2¼ (2) ¾ ¼ (2) (2) 4½ (2) (2) ¼ (8) ¾ (2) ½ (2) 4½ (2) (2) ¾ (2) 0 (2) 2 (6) (6) (6) ¼ ¾ (6) 6¼ (2) 9¼ (2) 2¾ (6) 4¼ (6) ¼ ¼ (20) ¼ (20) (6) 0½ (2) (20) 4½ (20) ¼ ½ (20) 6¼ (20) ½ ½ (6) (20) ¼ 4¾ (20) ¾ (20) ½ 6¾ (20) ¾ (6) (24) ¼ (24) (20) ¼ (20) 8¾ (20) (24) ¼ ¼ (24) ½ 6¼ (24) ¾ (20) 9¼ 2 (20) ¼ (24) ½ ½ (24) 6½ (24) ¾ 8¼ 2 (20) ¼ (24) ½ ¾ (24) ¾ 6¾ (24) 8¾ 2 (20) ¼ 4¼ (28) 6½ (28) ¾ ¾ (28) 9¼ 2 (28) ¼ 4 (28) (28) 8¼ (28) 9½ 0 (28) ¼ 4½ (28) ¾ ½ (28) 8¾ (28) 9¾ (28) ½ 4¾ (28) (28) 9¼ (2) ½ 4¾ (28) 8¼ (28) 9½ (2) ½ (2) 8½ (2) 9¾ (2) ½ (2) ½ 8¾ (2) ¾ 0½ (28) 2¼ 2¾ 40 (6) ½ (2) 9¼ (2) (2) 2¼ ¼ 4 (6) ½ (2) 9 (2) ¼ (28) 4 (40) ½ 8¼ (2) ¾ 0 (2) ¾ (2) 4 4 (40) ½ 8 (28) 0 (6) x 2¼ (2) 4 4 (44) ½ 8¾ (2) 0¾ (28) 2¼ 2¾ (2) 2¾ 0 (44) ¾ 9 (2) ¼ (2) 2¼ (28) 6¼ (44) ¾ 9 (2) (2) 2¼ ½ (2) 6¾ (44) ¾ 9¾ (28) 2¼ 2¼ (28) 4 (2) ¼ (48) ¾ 0 (28) 2¼ 2 (2) 4½ (2) ¼ (48) ¾ 0 (2) 2¼ 2¾ (2) 4¾ (2) ¼ 8¼ 60 (2) ¾ 0 (2) 2¼ (2) 2¾ (28) ½ 9 OTE: QTY listed for double washer kits represents quantity of sleeves only. The quantity of washers will be double the quantity of sleeves provided. [i.e. (4) sleeves = (8) washers, (2) sleeves = (24) washers] Larger sizes and high temperature sets available on request. Unless otherwise specified, all kits will be shipped with one () full length insulating ylar sleeve, one () insulating phenolic washer, and one () zinc plated steel washer per bolt.
Flange Insulation: Sleeve Quantity and Length Cross Reference Double Washer Kits DOUBLE WASHER KITS ipe ½ (Qty Sleeves)** Diameter Length 0 00 00 (4) ½ ¼ (4) ½ ½ (4) ½ (4) ½ (4) ¾ 2 (4) ¾ 2 ¾ (4) ½ (4) (4) 2 (4) 2 (4) ¾ 2 (4) ¾ 2 (4) ½ ½ (4) ¾ (4) 2¼ (4) 2¼ (4) (4) ¼ (4) ½ (4) (4) (4) (4) (4) ½ (4) ½ ¾ (4) ¾ (4) ¾ 2 (4) ¾ 2 (4) (4) (4) (8) 2 (8) 2 (8) 2 (8) (8) (4) 2 (8) ¾ 2 (8) ¾ (8) ¾ (8) 4 (8) 4 (4) 2¼ (8) ¾ 2 (8) ¾ (8) ¾ (8) (8) 4 ½ (8) 2¼ (8) ¾ 2¾ (8) (8) (8) 2¼ (8) ¾ 2 (8) (8) 4 (8) 4 (8) ¼ (8) ¾ 2¼ (8) ¾ 2¼ (8) (8) 4 (8) ¼ 4 (8) ½ (8) ¾ 2 (2) ¾ (2) 4 (2) 4 (2) ¼ (2) (8) ¾ 2 (2) (2) 4 (2) ¼ (2) (2) 8 0 (2) 2¾ (6) 4 (6) (6) ¼ (6) 6 (2) 9 (2) 2 (6) 4 (6) ¼ (20) ¼ 6 (20) (6) 0 (2) (20) 4 (20) ¼ (20) 6 (20) ½ (6) ¼ (20) ¼ 4 (20) (20) ½ 6 (20) (6) ½ (24) ¼ (24) 6 (20) (20) 8 (20) ¾ (24) ¼ (24) ½ 6 (24) (20) 9 2 (20) ¼ (24) ½ (24) 6 (24) ¾ 8 2 (20) ¼ 4 (24) ½ (24) ¾ 6 (24) 8 2 (20) ¼ 4 (28) 6 (28) ¾ (28) 9 2 (28) ¼ 4½ (28) (28) 8 (28) 9 0 (28) ¼ 4 (28) ¾ (28) 8 (28) 9 (28) ½ 4 (28) 8 (28) 9 (2) ½ (28) 8 (28) 9 (2) ½ (2) 8 (2) 9 (2) ½ ¼ (2) ½ 8 (2) ¾ 0 (28) 2¼ 2 40 (6) ½ ½ (2) 9 (2) (2) 2¼ 4 (6) ½ (2) 9¾ (2) (28) 4 4 (40) ½ 8 (2) ¾ 0 (2) (2) 4½ 4 (40) ½ 8½ (28) 0½ (6) 2 (2) 4 (44) ½ 8 (2) 0 (28) 2¼ 2 (2) 2¾ ¾ 0 (44) ¾ 9 (2) (2) 2¼ ¼ (28) 6 (44) ¾ 9½ (2) ¾ (2) 2¼ (2) 6 (44) ¾ 9 (28) 2¼ 2 (28) 4¼ (2) (48) ¾ 0 (28) 2¼ (2) 4 (2) ¼ (48) ¾ 0½ (2) 2¼ 2 (2) 4 (2) ¼ 8 60 (2) ¾ 0¾ (2) 2¼ ¼ (2) 2¾ ½ (28) ½ 9¼ OTE: QTY listed for double washer kits represents quantity of sleeves only. The quantity of washers will be double the quantity of sleeves provided. [i.e. (4) sleeves = (8) washers, (2) sleeves = (24) washers] Larger sizes and high temperature sets available on request. Unless otherwise specified, all kits will be shipped with one () full length insulating ylar sleeve, two (2) insulating phenolic washers, and two (2) zinc plated steel washers per bolt. 8
Flange Insulation: Tubing aterials List FT LEGTH Bolt ylar ½ ¾ ¼ ½ ¾ 2¼ 2¾ ½ LEGTH mm LEGTH omex Bolt ylar 2 9 4 2 ICH LEGTH oly hen G0 Tubing omex ylar oly hen G0 Tubing 6 20 24 2 0 6 6 Larger sizes and high temperature sets and custom builds available on request. Unless otherwise specified, all kits will be shipped with one () full length insulating ylar sleeve, two (2) insulating phenolic washers, and two (2) zinc plated steel washers per bolt. 9
Flange Insulation: Washer aterial List WASHER Bolt ½ ¾ ¼ ½ ¾ 2¼ 2¾ ¼ ½ SLEEVE & WASHER COBO Steel henolic G, G & G0 Bolt inlon ½ 9 6 ¾ 9 2 ¼ Larger sizes, high temperature sets, and custom builds available. Unless otherwise specified, all kits will be shipped with one () full length insulating ylar sleeve, two (2) insulating phenolic washers, and two (2) zinc plated steel washers per bolt. 0
Flange Insulation: Sleeve ID and OD Reference Sheet SLEEVE SLEEVE Bolt ID OD Bolt ID OD 0.9 0.4 0 0. 0. ½ 0.9 0.99 2 0.49 0. 0.64 0.2 6 0.649 0.690 ¾ 0. 0.849 20 0.80 0.8 0.89 0.9 24 0.96.00.09.099 2.08.6.4.22 0.200.280 ¼.269.49..9.9.4 6.4. ½.9.99 9..6.64.2 4.9. ¾.69.849 48.909.989.89.9 2 2.06 2.4 2.09 2.099 6 2.22 2.42 2¼ 2.269 2.49 64 2.9 2.6 2.9 2.99 2¾ 2. 2.849.09.099 ½..9 Larger sizes, high temperature sets, and custom builds available on request. Unless otherwise specified, all kits will be shipped with one () full length insulating ylar sleeve, two (2) insulating phenolic washers, and two (2) zinc plated steel washers per bolt.
Flange Kit Weights: Type E (Full Face) and Type F (Ring) Single Washer and Double Washer Kits TYE F GASKET KIT WEIGHTS TYE E GASKET KIT WEIGHTS SIGLE WASHER KITS DOUBLE WASHER KITS SIGLE WASHER KITS DOUBLE WASHER KITS 0# 00# # 0 # 00# # 0# 00# # 0# 00# # 0.26 0.28 0.2 0.4 0.8 0.48 0.2 0.4 0.6 0.8 0.4 0. 0.6 0.4 0.4 0.46.8.20 0.40 0.6 0.6 0.8 0.6 0.82 0.86 0.48.20. 0.60 0.98.02 0.4.6 0.40 0.92 0.92 0.0.28.48 0.62 0.98.04 0.6.44.48 0.8 0.96.02.08.4.82 0.84.6 2.26.20.92 2.44.00.6 2.26.8.6.2.24.8.6 2.42 4.24.26.96 2.84.64 2.88 4.24.60 2.2 4.6 2.8 4.06.90 0 2.00.08.4.20 4.64 8.6 0.00 4.22.82 4.04.2 9.2.04 4.98 6.86 4.08 6.0 0.26.4.6 4.44.8 0.26 4.42 8.0.08 4.20 4.84 0.0.60.06.82 9.92 6.0.64.6.40.46 6.6 8.68.46 0.2.24.92 4.0 8.86 6.20 6.48 0.6 8.6.0.2.24.26 4.28 2.00 20.0 2.2 2 9.84 2.28 2 6.60 8.6.8 2.68.02.46.6 Larger sizes, high temperature sets, and custom builds available on request. Unless otherwise specified, all kits will be shipped with one () full length insulating ylar sleeve, two (2) insulating phenolic washers, and two (2) zinc plated steel washers per bolt. 2
Flange Insulation: itrile-face and lain henolic Gasket Kits Type E (Full Face) Sleeves: ylar and oly Only (): ylar, oly and inlon (); Washers: henolic Single Washer Kits Double Washer Kits One iece SIGLE WASHER KITS ipe ¾ ¼ ½ ½ 0 2 2 2 2 0 0 00 One iece DOUBLE WASHER KITS 00 0 00 00 Larger sizes, high temperature sets (G, G and G0) and custom builds available on request. Unless otherwise specified, all kits will be shipped with one () full length insulating ylar sleeve, two (2) insulating phenolic washers, and two (2) zinc plated steel washers per bolt.
Flange Insulation: itrile-faced and lain henolic Gasket Kits Type F (Ring) Sleeves: ylar and oly Only (): ylar, oly and inlon (); Washers: henolic Single Washer Kits Double Washer Kits One iece SIGLE WASHER KITS 0 ipe ¾ ¼ ½ ½ 0 2 2 2 2 0 00 One iece DOUBLE WASHER KITS 00 0 00 00 Larger sizes, high temperature sets (G, G & G0) and custom builds available on request. Unless otherwise specified, all kits will be shipped with one () full length insulating ylar sleeve, two (2) insulating phenolic washers, and two (2) zinc plated steel washers per bolt. 4
Flange Insulation: itrile-face and lain henolic Gaskets Only Type E (Full Face) and Type F (Ring) TYE E GASKETS ipe ¾ ¼ ½ ½ 0 2 2 2 2 0 0 00 TYE F GASKETS 00 0 00 00 Larger sizes, high temperature sets (G, G and G0) and custom builds available on request. Unless otherwise specified, all kits will be shipped with one () full length insulating ylar sleeve, two (2) insulating phenolic washers, and two (2) zinc plated steel washers per bolt.
Flange Insulation: Sleeve and Washer Kits Only Sleeves: ylar and oly Only (): ylar, oly and inlon (); Washers: henolic Single Washer Kits Double Washer Kits One iece SIGLE WASHER KITS 0 ipe ¾ ¼ ½ ½ 0 2 2 2 2 0 00 One iece DOUBLE WASHER KITS 00 0 00 00 Larger sizes, high temperature sets and custom builds available on request. Unless otherwise specified, all kits will be shipped with one () full length insulating ylar sleeve, two (2) insulating phenolic washers, and two (2) zinc plated steel washers per bolt. 6
Flange Insulation: Sleeve and Washer Kits Only Sleeves: ylar ; Washers: henolic Single Washer Kits Double Washer Kits SIGLE WASHER KITS ipe 40 4 4 4 4 0 60 0 00 DOUBLE WASHER KITS 0 00 Larger sizes and high temperature sets available on request. Unless otherwise specified, all kits will be shipped with one () full length insulating ylar sleeve, two (2) insulating phenolic washers, and two (2) zinc plated steel washers per bolt.
Flange Insulation: Jock Kits: henolic with itrile Seal Type E (Full Face) Gaskets Sleeves: ylar and oly Only (): ylar, oly and inlon (); Washers: henolic Double Washer Kits Single Washer Kits One iece SIGLE WASHER KITS ipe ½ 0 2 2 2 2 0 0 00 One iece DOUBLE WASHER KITS 00 0 00 00 Larger sizes, high temperature sets (G, G & G0) and custom builds available on request. Unless otherwise specified, all kits will be shipped with one () full length insulating ylar sleeve, two (2) insulating phenolic washers, and two (2) zinc plated steel washers per bolt. 8
Flange Insulation: Jock Kits: henolic with itrile Seal Type F (Ring) Gaskets Sleeves: ylar and oly Only (): ylar, oly and inlon (); Washers: henolic Single Washer Kits Double Washer Kits One iece SIGLE WASHER KITS ipe ½ 0 2 2 2 2 0 0 00 One iece DOUBLE WASHER KITS 00 0 00 00 Larger sizes, high temperature sets (G, G & G0) and custom builds available on request. Unless otherwise specified, all kits will be shipped with one () full length insulating ylar sleeve, two (2) insulating phenolic washers, and two (2) zinc plated steel washers per bolt. 9
Flange Insulation: Jock Gaskets Only Type E (Full Face) and Type F (Ring) TYE E GASKETS ipe ½ 0 2 2 2 2 0 0 00 TYE F GASKETS 00 0 Larger sizes, high temperature sets (G, G & G0) and custom builds available on request. 20 00 00
Flange Insulation: RTJ: Gasket henolic Sleeves: ylar and oly Only (): ylar, oly and inlon (); Washers: henolic Double Washer Kits Single Washer Kits One iece SIGLE WASHER KITS ipe ½ 0 2 2 0 00 One iece DOUBLE WASHER KITS 00 0 00 00 Larger sizes, high temperature sets and custom builds available on request. Unless otherwise specified, all kits will be shipped with one () full length insulating ylar sleeve, two (2) insulating phenolic washers, and two (2) zinc plated steel washers per bolt. 2
Flange Insulation: RTJ Oval Type D Gasket Only Gasket: henolic RJ GASKETS ipe ½ 0 2 2 0 00 00 Larger sizes, high temperature sets and custom builds available on request. 22
Flange Insulation: Durlon Gasket Flange Insulation Kits Type E (Full Face) Sleeves: ylar and oly Only (): ylar, oly and inlon (); Washers: henolic Single Washer Kits Double Washer Kits One iece SIGLE WASHER KITS ipe ¾ ¼ ½ ½ 0 2 2 2 2 0 0 00 One iece DOUBLE WASHER KITS 00 0 00 00 Larger sizes and high temperature sets available on request. Unless otherwise specified, all kits will be shipped with one () full length insulating ylar sleeve, two (2) insulating phenolic washers, and two (2) zinc plated steel washers per bolt. ressure maximum is 00 psig (0 BAR) 2
Flange Insulation: special application Durlon Gasket Flange Insulation Kits Type E (Full Face) Sleeves: OEX ; Washer: G Double Washer Kits Single Washer Kits SIGLE WASHER KITS ipe ¾ ¼ ½ ½ 0 2 2 2 2 0 0 00 DOUBLE WASHER KITS Larger sizes and high temperature sets available on request. ressure maximum is 00 psig (0 BAR) 24 00 0 00 00
Flange Insulation: Durlon Gasket Flange Insulation Kits Type F (Ring Gasket) Sleeves: ylar and oly Only (): ylar, oly and inlon (); Washers: henolic Single Washer Kits Double Washer Kits One iece SIGLE WASHER KITS ipe ¾ ¼ ½ ½ 0 2 2 2 2 0 0 00 One iece DOUBLE WASHER KITS 00 0 00 00 Larger sizes and high temperature sets available on request. Unless otherwise specified, all kits will be shipped with one () full length insulating ylar sleeve, two (2) insulating phenolic washers, and two (2) zinc plated steel washers per bolt. ressure maximum is 00 psig (0 BAR) 2
Flange Insulation: special application Durlon Gasket Flange Insulation Kits Type F (Ring Gasket) Sleeves: OEX ; Washer: G Single Washer Kits Double Washer Kits One iece SIGLE WASHER KITS ipe ¾ ¼ ½ ½ 0 2 2 2 2 0 0 00 One iece DOUBLE WASHER KITS 00 0 00 00 Larger sizes and high temperature sets available on request. Unless otherwise specified, all kits will be shipped with one () full length insulating ylar sleeve, two (2) insulating phenolic washers, and two (2) zinc plated steel washers per bolt. ressure maximum is 00 psig (0 BAR) 26
Flange Insulation: special application Durlon Gasket Only Type E (Full Face) and Type F (Ring Gasket) TYE E GASKETS ipe ¾ ¼ ½ ½ 0 2 2 2 2 0 0 00 TYE F GASKETS 00 0 00 00 Larger sizes and high temperature sets available on request. ressure maximum is 00 psig (0 BAR) 2
Flange Insulation: special application Large Diameter Durlon Gasket Only Type E (Full Face) and Type F (Ring Gasket) TYE E GASKET ipe 40 4 4 4 4 0 60 0 00 TYE F GASKET ressure maximum is 00 psig (0 BAR) 28 0 00
Flange Insulation: special application High Temp Sleeve and Washer Set Sleeves: OEX ; Washer: G Single Washer Kits Double Washer Kits SIGLE WASHER KITS ipe ¾ ¼ ½ ½ 0 2 2 2 2 0 0 00 SIGLE WASHER KITS 00 0 00 00 Larger sizes and high temperature sets available on request. Unless otherwise specified, all kits will be shipped with one () full length insulating ylar sleeve, two (2) insulating phenolic washers, and two (2) zinc plated steel washers per bolt. 29
Flange Insulation: special application Jock Gasket Only Type E (Full Face) and Type F (Ring Gasket) Gasket: henolic with Viton Seal, G with Viton Seal or G0 with Viton TYE E GASKETS ipe ½ 0 2 2 2 2 0 0 00 TYE F GASKETS 00 0 00 00 Larger sizes and high temperature sets (G, G & G0) available on request. Unless otherwise specified, all kits will be shipped with one () full length insulating ylar sleeve, two (2) insulating phenolic washers, and two (2) zinc plated steel washers per bolt. 0