outique Collection Tubs Model # 211 52" *NEW MODEL FOR 2015* Halo 52" x 52" x 26" / 25"* *Available with a rolled rim or flat rim. See drawing below. Installation: Freestanding 52" 10" 50" 38" 12½" 1" SEE IMORTANT ORDERING & INSTALLATION INFORMATION ELOW Shown above as an Air ath. 50" 23" 26" 4" 12½" 26" 25" Note: Halo is available with a rolled rim, creating an overall tub height of 26. A flat rim may also be specified, which reduces overall tub height to 25. art numbers for either selection are listed on the following page. GENERAL SECIFICATIONS: Material Engineered Solid Stone (ESS) Soaker Weight 364 lbs / 165 kg Maximum Fill 121 gal to overflow NOTE: Filling this tub to the maximum may require an above average size or dedicated water heater. Not recommended as a tub / shower combination CSA Certified C/US; ANSI Z124.1 IMORTANT ORDERING & INSTALLATION INFORMATION: Includes an integrated slotted overflow, which only requires drain installation. May also be specified without an overflow (see local codes). Available with a rolled rim or a flat rim. Must specify correct part number on order. Requires partial or complete sub-floor drain installation. See installation manual for important installation information. Drain kits, faucet stands, bathroom table and air bath components (if applicable) are packaged with tub for delivery. Optional floor-mounted high-flow tub filler ships via FedEx. For air baths: the blower and required check valve must be remote mounted. Check valve must be installed higher than the rim of the tub. The keypad is shipped loose and may be mounted on a nearby wall or decking. A waterproof remote control is included. Requires use of a wall-mounted or freestanding tub filler. Measurements are + 1/2" and are subject to change without notice. Data herein supersedes all prior to publication date shown below. See the "outique Collection Tubs Installation & Operation Manual" included with tub delivery or go to mtibaths.com/support/installation_operation/manuals for all the information necessary to install and operate the tub. MTI's Customer Service Department is available Monday-Friday 8am-6pm EST at 800-783-8827 or customerservice@mtibaths.com to answer any questions pertaining to ordering or installation. CSA # MTCT-211 Effective 022015 A-63 2015 by MTI aths, Inc. Modification Rights Reserved.
outique Collection Tubs - Model # 211 Hydrotherapy ackages Soaker Air ath ackage Contents Soaking bath - no jets. Includes an integrated slotted overflow with a toe-tap drain kit in chrome finish. Choose from a rolled or flat rim. Notes: See "Important Ordering & Installation Information" on previous page. lease see installation manual for important drain installation details. 20 air jets, heated air blower, waterproof air system remote control & keypad, integrated slotted overflow with a toe-tap drain kit in chrome finish. Choose from a rolled or flat rim. Notes: See "Important Ordering & Installation Information" on previous page. lower & required check valve must be remote mounted. Check valve must be installed higher than the rim of the tub. lease see installation manual for important drain installation details. art # Choose from a rolled or flat rim Rolled Rim Flat Rim Rolled Rim Flat Rim S211R S211F Halo 52" x 52" x 26" / 25" AST211R AST211F MSR $6,655 $10,315 Lead Time - 10 business days; soaker or air bath. Tub Options Standard Colors / Finish - White or iscuit, matte finish Optional Finish Upcharge - White or iscuit, gloss finish $699 Additional colors available for projects only. lease call MTI. Quick Ship (QSRI2) $575 reduces lead time - please call for availability Note: part codes for all options listed in parenthesis Accessories & Hardware Floor-Mounted High-Flow Tub Filler - two designs available - see p. A-41 Contemporary - Chrome (FILLC) $2,125; rushed Nickel (FILLN) $2,375 Traditional - Chrome (FILLTC) $2,125; rushed Nickel (FILLTN) $2,375 Faucet Stand - color matched with tub at no additional charge - see p. A-42 Must be ordered at time of tub purchase. Small (STAND) $860; Large (STANDL) $960 athroom Table (TALE) $875 color matched with tub - see p. A-42 Toe-Tap Drain - Chrome (WIOTTC) STD; rushed Nickel Upcharge* (WIOTTN) add $25 *This tub includes an integrated slotted overflow that does not require decorative trim. Toe-tap drain is included in chrome finish. Above pricing represents finish upcharge ONLY. Contact MTI for pricing when a drain is ordered separately. Options Information Floor-Mounted High-Flow Tub Filler - Choose from contemporary or traditional design to complement most manufacturers' lavatory & shower faucets. Fill rate of 15 gallons per minute at 45 psi. Includes hand-held shower with independent valve. See page A-41 for detailed specifications. Faucet Stand - Constructed of Engineered Solid Stone material. Allows use of a traditional Roman faucet with a freestanding tub. Available in two sizes. Note: overall height for either size is 25" when ordered with this tub. Faucet stand must be ordered at time of tub purchase. See page A-42 for detailed specifications. athroom Table - Constructed of Engineered Solid Stone material. Ideal for placement of bathroom accessories. See page A-42 for detailed specifications. Alternate tub views: Integrated slotted overflow close-up. Rolled rim. Flat rim. Matching Lavatory Sink & Counter-Sink: For more information about Engineered Solid Stone lavatory sinks and Counter-Sinks, please visit mtibaths.com or see section "G" in the MTI binder. Halo 1 SR - MTCS-741 semi-recessed sink Halo Counter-Sink 1 MTCS-861 available in counter lengths from 20" up to 74" A-64
Designer Collection Tubs Model # 212 *NEW MODEL FOR 2015* Andrea 25 48" x 32" x 18" Installation: Drop-in or Undermount Must specify on order. 48" 8½" 26¾" 24" 32" 25 8" 16" 25 8" Shown with ackage. 42" 13½" 36½" 17" 113 97 Air lower 18" 16¼" IMORTANT: Air baths and tubs with a pre-leveled foam base or frame system add 2-3" to overall tub height. GENERAL SECIFICATIONS: Material Acrylic Soaker Weight 90 lbs / kg Maximum Fill 49 gal to overflow NOTE: Filling this tub to the maximum may require an above average size or dedicated water heater ELECTRICAL SECIFICATIONS: Required Electrical Service 110 Volt Air ath 1-15 amp GFCI CSA Certified C/US; ANSI Z124.1 for plastic tubs and ANSI 112.19.7 for whirlpool components. NOTE: See electrical specifications on page C-30 for electrical requirements of tub options. IMORTANT ORDERING & INSTALLATION INFORMATION: efore ordering or installing, please consider future access to equipment. Add bedding compound to fully level and support bottom of tub. Tubs equipped with an air bath or a pre-leveled foam base are designed to rest on the floor without bedding compound, provided the floor is level. Overall tub height is increased by approx. 2-3" when tub is equipped with any air bath package or when pre-leveled foam base or frame system is ordered. lease measure tub on-site before building tub decking. If you are planning to use a glass enclosure, MTI must be advised when ordering for possible relocation of controls. Control locations may vary. Specifications and configurations are subject to change without notice. Measurements are +1/2" and are subject to change without notice. Measurements herein supersede all others published prior to publication date shown below. See the "Designer Collection Tubs Installation & Operation Manual" included with tub delivery or go to mtibaths.com/support/installation_operation/manuals for all the information necessary to install and operate the tub. MTI's Customer Service Department is available Monday-Friday 8am-6pm EST at 800-783-8827 or customerservice@mtibaths.com to answer any questions pertaining to ordering or installation. CSA # MTDS-212 Effective 021615-337 2015 by MTI aths, Inc. Modification Rights Reserved.
Designer Collection Tubs - Model # 212 Hydrotherapy ackages ackage Contents Soaker soaking bath - no jets Standard ump/lower Locations Andrea 25 48" x 32" x 18" art # Specify 'DI' for MSR drop-in or 'UM' for undermount S212-DI S212-UM $1,791 Air ath ackages Elite 20 air jets, heated air blower, Aromatherapy, pre-leveled foam base (increases overall height 2-3") 30 air jets, heated air blower, Chromatherapy LED lighting, Spa Mode*, pre-leveled foam base (increases overall height 2-3") *Spa Mode not available if ordering Radiance option AST212-DI AST212-UM AE212-DI AE212-UM $4,382 $5,964 Lead Time - Soakers - 5 business days Air aths - 7 business days Tub Options Note: part codes for all options listed in parenthesis Standard Colors - White (CWH), one (CN), iscuit (CS), Almond (CAL) Color Upgrade - (COL2) $425 see page C-1 for available colors and part #'s Low-rofile Rim - reduces rim height to 9/16" (LR) $99 see p. C-8 Textured, Slip-Resistant ottom - meets ASTM F-462-1994 (TXTM) $69 Radiance - tub shell heating system - 2 zones (RAD100) $999 see p. C-3 Chromatherapy - underwater lighting (includes 2 LED units) (LE) $499 see p. C-5 Stereo H 2 O - 4 integrated audio transducers (STEREOH20) $1,099 see p. C-6 Quick Ship - reduces lead time - please call for availability (QSRI) $299 Accessories & Hardware for all ackages Virtual Spout - high-flow integrated tub filler (FMJ) $229 see p. C-9 Drain & Overflow Kits - other finishes also available - see p. C-10 Lift & Turn - Chrome (WOC) $86; rushed Nickel (WON) $160 Cable Driven - Chrome (WOCD) $258; rushed Nickel (WOCDN) $280 olished Nickel (WOCDN) $389; Oil-Rubbed ronze (WOCDOR) $396 Color-Matched with Tub - standard tub colors only (WOCDW) $256 Toe-Tap - Chrome (WOTTC) $194; rushed Nickel (WOTTN) $202 olished Nickel (WOTTN) $264 Slim-Line Integrated Overflow with Toe-Tap Drain Chrome (SLOTC), rushed Nickel (SLOTN) $359 Grab ars - 9" Curved, set of 2 - see p. C-11 Acrylic - Color-Matched with Tub - standard tub colors only (G) $263 Metal - Chrome (GMCC), rushed Nickel (GMCN) $293 illows - various styles available - from $148 see p. C-12 Hand-Held Shower - select styles available - from $1,034 see p. C-13 Teak Tub Tray - Slatted (TK-TRAY), Solid (TK-TRAY2) $392 see p. D-9 Teak ath Mat - (TK-MAT3018) $345 custom sizes also available see p. D-6 NOTES: Aromatherapy is eliminated for undermount applications Air aths, re-leveled Foam ase or Frame Systems increase overall height by 2-3". Installation Aids Tile Flange - must specify flange location(s) on order - see p. C-24 NOTE: Tile flange not available with Low-rofile Rim option. Factory-Installed rigid AS - 3 sides (TFK3) $175 Field Install Kit - rigid AS (TFKNI) $98 re-leveled Foam ase - for soakers or whirlpools (LFOAM) $150 see p. C-25 re-leveled Frame and Foam ase - (LF) $390 see p. C-25 Skirting with re-leveled Frame and Foam ase - Choose from skirting listed below. See p. C-26-29 for more info. & additional styles. Acrylic Traditional with Raised anels; one-piece (FSKAO45) $718 Acrylic Traditional with Removable anels (FSKAR45) $897 Acrylic Contemporary Flat anel; one-piece (FSKFO45) $718 Acrylic Contemporary Euro-Style with Removable anels (FSKE45) $975 Acrylic Skirting Color Upgrade (COL2) $425 see p. C-1 for available colors and part #'s aintable Wood with Removable MDF anels (FSKW45) $600-338
Designer Collection Tubs Model # 213 *NEW MODEL FOR 2015* New Yorker 7 71.75" x 36" x 21.25" Installation: Drop-in or Undermount Must specify on order. Not recommended as a tub / shower combination. 3 71 4 " 36" 8" 2¾" 20" 28" 8½" Compliance Label Model MTXXXX Made in USA Complies with ANSI Z124.1-1995 CSA Certified C/US 1 4" 2 3 7 35 8 " Numbered locations on tub deck are possible Fill-Flush, Hand-Held Shower or reda locations. If location 2 is chosen for Fill-Flush, the detergent feeder will need to be offset to the left or the right. Shown with and Ultra ackage. 61½" 19½" 20½" 21¼" 18" 40½" 121 IMORTANT: Air baths and tubs with a pre-leveled foam base or frame system add 2-3" to overall tub height. GENERAL SECIFICATIONS: Material Acrylic lumbed Weight 133 lbs / 60.33 kg Soaker Weight 110 lbs / 49.90 kg Average Fill 61 gal to above jet level Maximum Fill 102 gal to overflow NOTE: Filling this tub to the maximum may require an above average size or dedicated water heater. ELECTRICAL SECIFICATIONS: Required Electrical Service 110 Volt Air ath or Standard 1-15 amp GFCI Standard with Air 2-15 amp GFCI Ultra 2-20 amp GFCI Ultra with Air 2-20 amp GFCI CSA Certified C/US; ANSI Z124.1 for plastic tubs and ANSI 112.19.7 for whirlpool components. NOTE: See electrical specifications on page C-30 for electrical requirements of tub options. IMORTANT ORDERING & INSTALLATION INFORMATION: efore ordering or installing, please consider future access to equipment. Add bedding compound to fully level and support bottom of tub. Tubs equipped with an air bath or a pre-leveled foam base are designed to rest on the floor without bedding compound, provided the floor is level. Overall tub height is increased by approx. 2-3" when tub is equipped with any air bath package or when pre-leveled foam base or frame system is ordered. lease measure tub on-site before building tub decking. Suction and control locations may vary. Specifications and configurations are subject to change without notice. Measurements are +1/2" and are subject to change without notice. Measurements herein supersede all others published prior to publication date shown below. See the "Designer Collection Tubs Installation & Operation Manual" included with tub delivery or go to mtibaths.com/support/installation_operation/manuals for all the information necessary to install and operate the tub. MTI's Customer Service Department is available Monday-Friday 8am-6pm EST at 800-783-8827 or customerservice@mtibaths.com to answer any questions pertaining to ordering or installation. CSA # MTDS-213 Effective 021615-339 2015 by MTI aths, Inc. Modification Rights Reserved.
Designer Collection Tubs - Model # 213 Hydrotherapy ackages ackage Contents Soaker soaking bath - no jets Standard ump/lower Locations New Yorker 7 71.75" x 36" x 21.25" art # Specify 'DI' for MSR drop-in or 'UM' for undermount S213-DI S213-UM $2,102 ackages Standard Ultra 6 point-massage jets, 2-bhp pump 6 point-massage jets, 12 micro-jets with Tsubo massage, 2 2-bhp pumps, inline heater 213-DI 213-UM 213U-DI 213U-UM $3,907 $6,239 Air ath ackages Air ath / Combo ackages Elite with Standard with Ultra Elite with Standard Elite with Ultra 20 air jets, heated air blower, Aromatherapy, pre-leveled foam base (increases overall height 2-3") 30 air jets, heated air blower, Chromatherapy LED lighting, Spa Mode*, pre-leveled foam base (increases overall height 2-3") *Spa Mode not available if ordering Radiance option 6 point-massage jets, 2-bhp pump, 20 air jets, heated air blower, Aromatherapy, pre-leveled foam base (increases overall height 2-3") 6 point-massage jets, 12 micro-jets with Tsubo massage, 2 2-bhp pumps, inline heater, 20 air jets, heated air blower, Aromatherapy, pre-leveled foam base (increases overall height 2-3") 6 point-massage jets, 2-bhp pump, 30 air jets, heated air blower, Aromatherapy, Chromatherapy LED lighting, Spa Mode, pre-leveled foam base (increases overall height 2-3") 6 point-massage jets, 12 micro-jets with Tsubo massage, 2 2-bhp pumps, inline heater, 30 air jets, heated air blower, Aromatherapy, Chromatherapy LED lighting, Spa Mode, pre-leveled foam base (increases overall height 2-3") Lead Time - Soakers and ackages - 5 business days Air aths and Combo ackages - 7 business days Tub Options Note: part codes for all options listed in parenthesis Standard Colors - White (CWH), one (CN), iscuit (CS), Almond (CAL) Color Upgrade - (COL2) $425 see page C-1 for available colors and part #'s Textured, Slip-Resistant ottom - meets ASTM F-462-1994 (TXTM) $69 Radiance - tub shell heating system - 2 zones (RAD100) $999 see p. C-3 Inline Heater - s or Combo ackages (HTI) $466 see p. C-4 Inline Heater with ump - Soaker or Air aths (HTISOAK) $699 see p. C-4 Chromatherapy - underwater lighting (includes 2 LED units) (LE) $499 see p. C-5 Stereo H 2 O - 4 integrated audio transducers (STEREOH20) $1,099 see p. C-6 Quick Ship - reduces lead time - please call for availability (QSRI) $299 Accessories & Hardware for all ackages Virtual Spout - high-flow integrated tub filler (FMJ) $229 see p. C-9 Drain & Overflow Kits - other finishes also available - see p. C-10 Lift & Turn - Chrome (WOC) $86; rushed Nickel (WON) $160 Cable Driven - Chrome (WOCD) $258; rushed Nickel (WOCDN) $280 olished Nickel (WOCDN) $389; Oil-Rubbed ronze (WOCDOR) $396 Color-Matched with Tub - standard tub colors only (WOCDW) $256 Toe-Tap - Chrome (WOTTC) $194; rushed Nickel (WOTTN) $202 olished Nickel (WOTTN) $264 Slim-Line Integrated Overflow with Toe-Tap Drain Chrome (SLOTC), rushed Nickel (SLOTN) $359 Grab ars - 9" Curved, set of 2 - see p. C-11 Acrylic - Color-Matched with Tub - standard tub colors only (G) $263 Metal - Chrome (GMCC), rushed Nickel (GMCN) $293 illows - various styles available - from $148 see p. C-12 Hand-Held Shower - select styles available - from $1,034 see p. C-13 Teak Tub Tray - Slatted (TK-TRAY), Solid (TK-TRAY2) $392 see p. D-9 Teak ath Mat - (TK-MAT3018) $345 custom sizes also available see p. D-6 AST213-DI AST213-UM AE213-DI AE213-UM AW213-DI AW213-UM AU213-DI AU213-UM AEA213-DI AEA213-UM AEA213U-DI AEA213U-UM $4,598 $6,328 $6,428 $9,214 $8,078 $10,534 NOTES: Aromatherapy is eliminated for undermount applications Air aths or re-leveled Foam ase increase overall height by 2-3". Accessories & Cleaning Systems for ackages Cleaning Systems - see pages C-18-23 for more information Fill-Flush (FFSO) $559; Simple Touch (FFE) $699 Fresh Wave whirlpool cleaning solution see p. C-19 3 bottles (FFCLOT) $59; 12 bottles (FFCLCASE) $165 Ozonator ath Sanitation System (OZONE) $499 Trim Kits - must be ordered at time of tub purchase; other finishes available - see p. C-17 Standard - Chrome (TRC) $216; rushed Nickel (TRN) $398 Ultra - Chrome (TRCU) $383; rushed Nickel (TRNU) $677 ump Upgrade - 3-bhp (UM3) $223 Additional oint-massage Jets - (EJ) $235 see p. C-16 Rotary Jets - can be substituted for point-massage jets (max 2) see p. C-16 Micro-Jets - from $303 see p. C-16 Installation Aids re-leveled Foam ase - for soakers or whirlpools (LFOAM) $150 see p. C-25 Template - Available for drop-in applications ONLY. (TEMLATE213) $17 Inside view of tub. Note: Addition of options may alter standard pump/blower locations shown above. -340
Designer Collection Tubs Model # 214 *NEW MODEL FOR 2015* New Yorker 8 71.75" x 36" x 24" Installation: Freestanding Not recommended as a tub / shower combination. 3 71 4 " 7 35 8" 8½" 36" 20" 28" 8" 2¾" 4" Requires use of a wall-mounted or freestanding tub filler. The drain and overflow assembly is concealed between the walls of the tub, eliminating the need for an exposed drain kit. Shown with ackage. 61½" 24" 18" 20½" 40½" 121 38½" GENERAL SECIFICATIONS: Material Acrylic Soaker Weight 140 lbs / 63.5 kg Maximum Fill 102 gal to overflow NOTE: Filling this tub to the maximum may require an above average size or dedicated water heater. ELECTRICAL SECIFICATIONS: Required Electrical Service 110 Volt Air ath 1-15 amp GFCI CSA Certified C/US; ANSI Z124.1 for plastic tubs and ANSI 112.19.7 for whirlpool components. NOTE: See electrical specifications on page C-30 for electrical requirements of tub options. IMORTANT ORDERING & INSTALLATION INFORMATION: efore ordering or installing, please consider future access to equipment. When ordering an air bath, the air blower must be remote mounted. This tub has an extruded area on the drain side with a removable access panel for installation of waste and overflow kit (see image to the right). If the tub is ordered without the removable panel, the extruded area will still be visible and cannot be eliminated. Installation will be more difficult without the access panel. Specifications and configurations are subject to change without notice. Measurements are +1/2" and are subject to change without notice. Measurements herein supersede all others published prior to publication date shown below. See the "Designer Collection Tubs Installation & Operation Manual" included with tub delivery or go to mtibaths.com/support/installation_operation/manuals for all the information necessary to install and operate the tub. MTI's Customer Service Department is available Monday-Friday 8am-6pm EST at 800-783-8827 or customerservice@mtibaths.com to answer any questions pertaining to ordering or installation. CSA # MTDS-214 Effective 022315-341 2015 by MTI aths, Inc. Modification Rights Reserved.
Designer Collection Tubs - Model # 214 New Yorker 8 71.75" x 36" x 24" Hydrotherapy ackages ackage Contents art # MSR Soaker Soaking bath - no jets; includes a pre-leveled foam base S214 $4,204 Air ath ackages Elite 20 air jets, heated air blower, pre-leveled foam base lower and / or control boxes must be remote located 30 air jets, heated air blower, Chromatherapy LED lighting, Spa Mode*, pre-leveled foam base *Spa Mode not available if ordering Radiance option AST214 $6,698 AE214 $8,186 Lead Time - 7 business days (any configuration) Tub Options Note: part codes for all options listed in parenthesis Standard Colors - White (CWH), one (CN), iscuit (CS), Almond (CAL) Color Upgrade - (COL3) $750 see page C-1 for available colors and part #'s Textured, Slip-Resistant ottom - meets ASTM F-462-1994 (TXTM) $69 Radiance - tub shell heating system - 2 zones (RAD100) $999 see p. C-3 Stereo H 2 O - 4 integrated audio transducers (STEREOH20) $1,099 see p. C-6 Quick Ship - reduces lead time - please call for availability (QSRI) $299 Accessories & Hardware Floor-Mounted High-Flow Tub Filler - two designs available - see p. C-14 Contemporary - Chrome (FILLC) $2,125; rushed Nickel (FILLN) $2,375 Traditional - Chrome (FILLTC) $2,125; rushed Nickel (FILLTN) $2,375 Virtual Spout - (FMJ) $229 see p. C-9 Drain & Overflow Kits - other finishes also available - see p. C-10 Lift & Turn - Chrome (WOC) $86; rushed Nickel (WON) $160 Cable Driven - Chrome (WOCD) $258; rushed Nickel (WOCDN) $280 olished Nickel (WOCDN) $389; Oil-Rubbed ronze (WOCDOR) $396 Color-Matched with Tub - standard tub colors only (WOCDW) $256 Toe-Tap - Chrome (WOTTC) $194; rushed Nickel (WOTTN) $202 olished Nickel (WOTTN) $264 Slim-Line Integrated Overflow with Toe-Tap Drain Chrome (SLOTC), rushed Nickel (SLOTN) $359 Decorative Towel ar see p. C-15 Chrome (CHTOWEL), rushed Nickel (NTOWEL) $435 Concealed lower ox see p. C-15 Oak (OAK), Cherry (CH), Maple (MA) $776 Grab ars - 9" Curved, set of 2 - see p. C-11 Acrylic - Color-Matched with Tub - standard tub colors only (G) $263 Metal - Chrome (GMCC), rushed Nickel (GMCN) $293 illows - various styles available - from $148 see p. C-12 Teak Tub Tray - Slatted (TK-TRAY), Solid (TK-TRAY2) $392 see p. D-9 Teak ath Mat - (TK-MAT3018) $345 custom sizes also available see p. D-6 Options Information Radiance - Integrated tub surface heating system designed to warm the interior surface of the bathing well. Utilizes electric heating grids for 2 zones; either both backrests or a single backrest and one seated area of the tub floor. See page C-3 for detailed specifications. Floor-Mounted High-Flow Tub Filler - Choose from contemporary or traditional design to complement most manufacturers' lavatory & shower faucets. Fill rate of 15 gallons per minute at 45 psi. Includes handheld shower with independent valve. See page C-14 for detailed specifications. Virtual Spout - Integrated high-flow filler spout that is factory-installed on the inside wall of the tub. See page C-9 for detailed specifications. Decorative Towel ar - Heavy-duty towel bar is both decorative and functional. Manufactured of high-quality stainless steel for strength and durability. See page C-15 for detailed specifications. Concealed Air lower ox - Designed to hide air blower next to tub when ordered with an air bath package. If tub is ordered as a soaker, it can also be used to mount faucetry. See page C-15 for detailed specifications. Inside view of tub. -342
Designer Collection Tubs Model # 215 *NEW MODEL FOR 2015* Laney 3 72" x 33.75" x 21.5" Installation: Drop-in cannot be undermounted Not recommended as a tub / shower combination. 72" 3 4 23" 27¾" 8½" 1 3" 2 36" 33¾" Numbered locations outside of tub deck are possible Fill-Flush, Hand-Held Shower or reda stub-out locations. Shown with and Ultra ackage. 2" 62½" Compliance Label Model MTXXXX Made in USA Complies with ANSI Z124.1-1995 CSA Certified C/US 19½" 17" 49½" 20½" 21½" 114 IMORTANT: Air baths and tubs with a pre-leveled foam base add 2-3" to overall tub height. GENERAL SECIFICATIONS: Material Acrylic lumbed Weight 110 lbs / 49.90 kg Soaker Weight 88 lbs / 39.92 kg Average Fill 30 gal to above jet level Maximum Fill 67 gal to overflow NOTE: Filling this tub to the maximum may require an above average size or dedicated water heater. ELECTRICAL SECIFICATIONS: Required Electrical Service 110 Volt Air ath or Standard 1-15 amp GFCI Standard with Air 2-15 amp GFCI Ultra 1-15 amp & 1-20 amp GFCI Ultra with Air 2-20 amp GFCI CSA Certified C/US; ANSI Z124.1 for plastic tubs and ANSI 112.19.7 for whirlpool components. NOTE: See electrical specifications on page C-30 for electrical requirements of tub options. See the "Designer Collection Tubs Installation & Operation Manual" included with tub delivery or go to mtibaths.com/support/installation_operation/manuals for all the information necessary to install and operate the tub. MTI's Customer Service Department is available Monday-Friday 8am-6pm EST at 800-783-8827 or customerservice@mtibaths.com to answer any questions pertaining to ordering or installation. CSA # MTDS-215 Effective 021615-343 IMORTANT ORDERING & INSTALLATION INFORMATION: efore ordering or installing, please consider future access to equipment. Add bedding compound to fully level and support bottom of tub. Tubs equipped with an air bath or a pre-leveled foam base are designed to rest on the floor without bedding compound, provided the floor is level. Overall tub height is increased by approx. 2-3" when tub is equipped with any air bath package or when pre-leveled foam base is ordered. lease measure tub on-site before building tub decking. Suction and control locations may vary. Specifications and configurations are subject to change without notice. Measurements are +1/2" and are subject to change without notice. Measurements herein supersede all others published prior to publication date shown below. 2015 by MTI aths, Inc. Modification Rights Reserved.
Designer Collection Tubs - Model # 215 Laney 3 72" x 33.75" x 21.5" Hydrotherapy ackages ackage Contents Standard ump/lower Locations art # MSR Soaker soaking bath - no jets S215 $2,099 ackages Standard Ultra 6 point-massage jets, 2-bhp pump 215 $3,826 6 point-massage jets, 12 micro-jets with Tsubo massage, 2 2-bhp pumps, inline heater 215U $6,276 Air ath ackages Elite 20 air jets, heated air blower, pre-leveled foam base (increases overall height 2-3") 30 air jets, heated air blower, Chromatherapy LED lighting, Spa Mode*, pre-leveled foam base (increases overall height 2-3") *Spa Mode not available if ordering Radiance option AST215 $4,446 AE215 $6,178 with Standard 6 point-massage jets, 2-bhp pump, 20 air jets, heated air blower, pre-leveled foam base (increases overall height 2-3") AW215 $6,245 Air ath / Combo ackages with Ultra Elite with Standard 6 point-massage jets, 12 micro-jets with Tsubo massage, 2 2-bhp pumps, inline heater, 20 air jets, heated air blower, pre-leveled foam base (increases overall height 2-3") 6 point-massage jets, 2-bhp pump, 30 air jets, heated air blower, Chromatherapy LED lighting, Spa Mode, pre-leveled foam base (increases overall height 2-3") AU215 $7,938 AEA215 $8,939 Elite with Ultra 6 point-massage jets, 12 micro-jets with Tsubo massage, 2 2-bhp pumps, inline heater, 30 air jets, heated air blower, Chromatherapy LED lighting, Spa Mode, pre-leveled foam base (increases overall height 2-3") AEA215U $10,335 Lead Time - Soakers and ackages - 5 business days Air aths and Combo ackages - 7 business days Tub Options Standard Colors - White (CWH), one (CN), iscuit (CS), Almond (CAL) Color Upgrade - (COL1) $250 see page C-1 for available colors and part #'s Textured, Slip-Resistant ottom - meets ASTM F-462-1994 (TXTM) $69 Radiance - tub shell heating system - 2 zones (RAD100) $999 see p. C-3 Inline Heater - s or Combo ackages (HTI) $466 see p. C-4 Inline Heater with ump - Soaker or Air aths (HTISOAK) $699 see p. C-4 Chromatherapy - underwater lighting (includes 2 LED units) (LE) $499 see p. C-5 Stereo H 2 O - 4 integrated audio transducers (STEREOH20) $1,099 see p. C-6 Quick Ship - reduces lead time - please call for availability (QSRI) $299 Accessories & Hardware for all ackages Virtual Spout - high-flow integrated tub filler (FMJ) $229 see p. C-9 Drain & Overflow Kits - other finishes also available - see p. C-10 Lift & Turn - Chrome (WOC) $86; rushed Nickel (WON) $160 Cable Driven - Chrome (WOCD) $258; rushed Nickel (WOCDN) $280 olished Nickel (WOCDN) $389; Oil-Rubbed ronze (WOCDOR) $396 Color-Matched with Tub - standard tub colors only (WOCDW) $256 Toe-Tap - Chrome (WOTTC) $194; rushed Nickel (WOTTN) $202 olished Nickel (WOTTN) $264 Slim-Line Integrated Overflow with Toe-Tap Drain - Chrome (SLOTC), rushed Nickel (SLOTN), olished Nickel (SLOTN), White (SLOTW) $359 Grab ars - 9" Curved, set of 2 - see p. C-11 Acrylic - Color-Matched with Tub - standard tub colors only (G) $263 Metal - Chrome (GMCC), rushed Nickel (GMCN) $293 illows - various styles available - from $148 see p. C-12 Hand-Held Shower - select styles available - from $1,034 see p. C-13 Teak ath Mat - (TK-MAT3018) $345 custom sizes also available see p. D-6 NOTE: Tubs equipped with an Air ath package and/or re-leveled Foam ase increase overall height by 2-3". Accessories & Cleaning Systems for ackages Cleaning Systems - see pages C-18-23 for more information Fill-Flush (FFSO) $559; Simple Touch (FFE) $699 Fresh Wave whirlpool cleaning solution see p. C-19 3 bottles (FFCLOT) $59; 12 bottles (FFCLCASE) $165 Ozonator ath Sanitation System (OZONE) $499 Trim Kits - must be ordered at time of tub purchase; other finishes available - see p. C-17 Standard - Chrome (TRC) $216; rushed Nickel (TRN) $398 Ultra - Chrome (TRCU) $383; rushed Nickel (TRNU) $677 ump Upgrade - 3-bhp (UM3) $223 Additional oint-massage Jets - (EJ) $235 see p. C-16 Rotary Jets - can be substituted for point-massage jets (max 2) see p. C-16 Micro-Jets - from $303 see p. C-16 Installation Aids re-leveled Foam ase - for soakers or whirlpools (LFOAM) $150 see p. C-25 Template - Available for drop-in applications ONLY. (TEMLATE215) $17-344
Designer Collection Tubs Model # 216 *NEW MODEL FOR 2015* Laney 4 72" x 33.75" x 23.5" Installation: Freestanding Not recommended as a tub / shower combination. 72" 36" 8½" 23" 27¾" 33¾" 3" Requires use of a wall-mounted or freestanding tub filler. The drain and overflow assembly is concealed between the walls of the tub, eliminating the need for an exposed drain kit. Shown with ackage. 62½" 3" 49½" 17" 20½" 23½" 114 IMORTANT: Must have access to the drain from underneath tub for installation and servicing. GENERAL SECIFICATIONS: Material Acrylic Soaker Weight 121 lbs / 54.88 kg Maximum Fill 67 gal to overflow NOTE: Filling this tub to the maximum may require an above average size or dedicated water heater. ELECTRICAL SECIFICATIONS: Required Electrical Service 110 Volt Air ath 1-15 amp GFCI CSA Certified C/US; ANSI Z124.1 for plastic tubs and ANSI 112.19.7 for whirlpool components. NOTE: See electrical specifications on page C-30 for electrical requirements of tub options. IMORTANT ORDERING & INSTALLATION INFORMATION: Tub features an integrated, non-removable pedestal base. efore ordering or installing, please consider future access to equipment. Must have access to the drain from underneath the tub for installation & servicing. To facilitate the installation process, the overflow assembly is pre-installed at the factory. Cable drain kit is included for on-site installation. When ordering an air bath, the air blower must be remote mounted. If tub is equipped with Chromatherapy or Radiance, the control box must be remote mounted. Virtual Spout option can only be installed on the drain side of tub. Specifications and configurations are subject to change without notice. Measurements are +1/2" and are subject to change without notice. Measurements herein supersede all others published prior to publication date shown below. See the "Designer Collection Tubs Installation & Operation Manual" included with tub delivery or go to mtibaths.com/support/installation_operation/manuals for all the information necessary to install and operate the tub. MTI's Customer Service Department is available Monday-Friday 8am-6pm EST at 800-783-8827 or customerservice@mtibaths.com to answer any questions pertaining to ordering or installation. CSA # MTDS-216 Effective 021615-345 2015 by MTI aths, Inc. Modification Rights Reserved.
Designer Collection Tubs - Model # 216 Laney 4 72" x 33.75" x 23.5" Hydrotherapy ackages ackage Contents art # MSR Soaker Soaking bath - no jets; includes a pre-leveled foam base, cable drain in chrome finish. S216 $4,785 Air ath ackages Elite 20 air jets, heated air blower, pre-leveled foam base, cable drain in chrome finish. lower and / or control boxes must be remote located 30 air jets, heated air blower, Chromatherapy LED lighting, Spa Mode*, pre-leveled foam base *Spa Mode not available if ordering Radiance option lower and / or control boxes must be remote located AST216 $7,259 AE216 $8,915 Lead Time - 7 business days (any configuration) Tub Options Note: part codes for all options listed in parenthesis Standard Colors - White (CWH), one (CN), iscuit (CS), Almond (CAL) Color Upgrade - (COL3) $750 see page C-1 for available colors and part #'s Textured, Slip-Resistant ottom - meets ASTM F-462-1994 (TXTM) $69 Radiance - tub shell heating system - 2 zones (RAD100) $999 see p. C-3 Chromatherapy - underwater lighting (includes 2 LED units) (LE) $499 see p. C-5 Stereo H 2 O - 4 integrated audio transducers (STEREOH20) $1,099 see p. C-6 Quick Ship - reduces lead time - please call for availability (QSRI) $299 Accessories & Hardware Floor-Mounted High-Flow Tub Filler - two designs available - see p. C-14 Contemporary - Chrome (FILLC) $2,125; rushed Nickel (FILLN) $2,375 Traditional - Chrome (FILLTC) $2,125; rushed Nickel (FILLTN) $2,375 Virtual Spout - (FMJ) $229 see p. C-9 Must be installed on drain side of tub. Cable Drain Kit see p. C-10 - Chrome finish is Included with tub standard rushed Nickel Upcharge (WOCDN) $25* olished Nickel Upcharge (WOCDN) $25* Oil-Rubbed ronze Upcharge (WOCDOR) $35* Color-Matched with Tub (WOCDW) no charge option instead of chrome *This tub includes a complete drain kit in chrome finish. Above pricing represents finish upcharge ONLY. Contact MTI for pricing on drain kits sold separately. Decorative Towel ar see p. C-15 Chrome (CHTOWEL), rushed Nickel (NTOWEL) $435 Concealed lower ox see p. C-15 Oak (OAK), Cherry (CH), Maple (MA) $776 Grab ars - 9" Curved, set of 2 - see p. C-11 Acrylic - Color-Matched with Tub - standard tub colors only (G) $263 Metal - Chrome (GMCC), rushed Nickel (GMCN) $293 illows - various styles available - from $148 see p. C-12 Note: Must have access to the drain from underneath tub for installation and servicing. Options Information Radiance - Integrated tub surface heating system designed to warm the interior surface of the bathing well. Utilizes electric heating grids for 2 zones; either both backrests or a single backrest and one seated area of the tub floor. See page C-3 for detailed specifications. Chromatherapy - Underwater lighting provided by two digitally controlled LED lights. A control button allows a selection of constant colors or preset programs to achieve the desired lighting effects & utilize these chromatic energy sources. See page C-5 for detailed specifications. Floor-Mounted High-Flow Tub Filler - Choose from contemporary or traditional design to complement most manufacturers' lavatory & shower faucets. Fill rate of 15 gallons per minute at 45 psi. Includes handheld shower with independent valve. See page C-14 for detailed specifications. Virtual Spout - Integrated high-flow filler spout that is factory-installed on the inside wall of the tub. See page C-9 for detailed specifications. Decorative Towel ar - Heavy-duty towel bar is both decorative and functional. Manufactured of high-quality stainless steel for strength and durability. See page C-15 for detailed specifications. Front view of tub. Concealed Air lower ox - Designed to hide air blower next to tub when ordered with an air bath package. If tub is ordered as a soaker, it can also be used to mount faucetry. See page C-15 for detailed specifications. Inside view of tub. -346