LED T8 Tube Standard T8 LED TUBE (L05G-H) www.ervan.cn Universal Application L05G-H Standard T8 LED TUBE CB [ [ (Applying) Type Approved safety Regular Production Surveillance www.tuv.com ID 200000000 5485 SAA Rated voltage Frecuency +40 C 220-240V 50-60Hz -20 C 01
1.Features -SDCM 3 or 6 -Up to 160Lm/w -180 rotated cap -CRI>80 or CRI>90 -Non-flicker available -Up to 70% energy saving -Standard 5- year warranty -Standard 74,000 hours (L70B10) -Wide use in commercial and industrial area -Emergency / Microwave / Dimmable available 6 1 2 4 3 5 5 years warranty RG0 RG0 1 180 Deg rotating 2 mm Diameters 3 T8/ Base T8/ Base 180 mm 4 Aluminum housing 5 Driver protect hook 6 PC cover Driver protect hook 2.Application OFFICE Corridors and stairways,meeting rooms,entrance areas, Open-plan offices,offices,sanitary areas EDUCATION Classrooms,Cafeteria,Auditorium,Sports halls HEALTH & CARE Normal care,intensive care,or sector, Examination rooms,sanitary areas SHOP & RETAIL Shopping mall,supermarkets,retail stores ARCHITECTURAL Exhibition center,library,art Museum Concert hall,museum www.ervan.cn 02
3.Product Dimension A B C Model NO. Size A(MM) Size B(MM) Size C(Base) L05G-H/600MM 588 L05G-H/900MM 894 L05G-H/1200MM 1198 L05G-H/1500MM 1498 L05G-H/1500MM-C 1498 L05G-H/1800MM 1763 4. Parameter Model NO. / Length L05G-H/600MM L05G-H/900MM L05G-H/1200MM L05G-H/1500MM L05G-H/1500MM-C L05G-H/1800MM Power (W) 11 17 20 24 30 30 Clear Lumens Cover Lm/W 1430 130 2210 130 00 130 3120 130 3900 130 3900 130 1h / 3h Dimmable Emergency Motion sensor Notes: Frosted cover is 10Lm/W less than clear cover, above lumens based on 4000K Ra : 80 All values in +25 C ambient temperature, luminous flux tolerance +-5%, output power tolerance +-5%. Light Source : 2835 CRI Range : 80 / 90 / 95 CCT Range : WW(3000K) NW(4000K) DW(5000K) CW(6500K) AC : 220-240V 50/60Hz SDCM 3 or 6 L70B10 @Ta 25 : 74000h L70B50 @Ta 25 : 85000h Beam Angle : 120 Light Efficiency : 130Lm/W, 160Lm/W Size(mm) : Φ Recommended Installation Height : 2-15M PF: 0.93 THD<20% Power Efficiency: 0.90 Temperature : (Storage : -40~+85 C) (Operating : -20~+40 C) 5. Standard Installation 1. Installation For Magnetic Ballast 2. Installation For Electronic Ballast ATTENTION just replace starter with fuse for retrofit only suitable for battens with magnetic ballast, not electronic ballast ATTENTION Electronic ballast must be by-passed by a registered electrician Starter LED FUSE 1.Turn off the power 2.Take out the fluorescent 3.Take out the starter 4.Install LED fuse 5.Install LED tube 6.Turn on the power tube www.ervan.cn 03
6. Mounted Installation(30W not available) 1.Micro-sensor Data Sensor Distance MAX.7m 10m 7m Hold Time 5.8GHZ Mounting Height MAX.10M 2 steps dim Lighting 100%-20% Hold Time Optional Micro-Wave 5.8GHZ Microwave frequency: 5.8GHz+/-75MHz Detection Distance: 10m Max. Mounting height: 2.5-10m Detection area: D(10)m,H(3m) Detection angle: 30 ~ 150 Daylight threshold: NO The sensitivity Settings: NO Hold time: 30s / 90s / 3min / 5min / 10min / 15min / 20min / 30min Standby dimming level: 20% 2 steps dim Standby period: All the time 2.The difference about bright with time on 2 steps 2.Steps Bright 100% 20% Detection 30S 1min Time 3.Steps dimming control demonstration Step 1 Step 2 The sensor switches on the light automatically when person enters the room People left, light dims to 20% standby level after the hold time PLS Note: After the microware sensor product is powered on, self-test program will auto power on automatically, then entering the normal induction state after self-test. www.ervan.cn 04
A.Ceiling Mounted High sensitivity Low sensitivity High sensitivity Low sensitivity 4.DIP switch Delay time Delay time is the time after leaving the moving object detection area 100% bright light period can be set via DIP switch on the sensor. 5s set common to test whether the product is working properly. I 30s II 90s III 3min IV 5min V 10min VI 15min VII 20min VIII 30min 30s 90s 3min 5min 10min 15min 20min 30min 7. Dimmable Installation LED1+ LED1-1-10V / DALI BUS Driver Live Neutral 1-10V dimmable & DALI dimmable 8. Emergency Installation Emergency Box Size 600 40 60 www.ervan.cn 05
B Parameter(Emergency) Emergency Time Emergency Power Emergency Voltage Emergency Current 3h 8W 35V 200MA Battery Charging Time <24h Efficiency 89% C. Battery SPEC Battery Type Capacity Voltage Capacity Current Ambient Temperature NI-MH 7.2V 4000mA/h -10 to +50 Installation Battery Emergency module LED Driver 1.Wiring Light Voltage: US: AC 100-277V EU: AC 220-240V www.ervan.cn 06
2.Integrated layout Emergency Box Test Batton AC DC Output 9.Packaging Small Carton 25 pcs/ cart on Master Carton T8 Length Type Single Box Pcs/ctn N.W.(kg) G.W./ctn(kg) Meas(mm) 600MM TUBE (Add Fuse) 1 50 6.5 10.5 712*382*210 900MM TUBE (Add Fuse) 1 50 9.6 14.9 1017*382*210 1200MM TUBE (Add Fuse) 1 50 12.3 18.8 1322*382*210 1500MM TUBE (Add Fuse) 1 50 15.85 1800MM TUBE (Add Fuse) 1 25 18.4 21.2 25.6 1622*382*210 1922*382*210 10. Attention This specification is for reference only,we reserve the right to change without notice.if you need the updated info,please contact local distributors or visit our website at http://www.ervan.cn This product is non-resistant to some chemical substances,please contact the manufacturer for the details. ERVAN reserves the right of final explanation. www.ervan.cn 07