CITY OF SOUTH BURLINGTON, VERMONT SOUTH BURLINGTON CITY OFFICE STORMWATER IMPROVEME PROJECT LOCATION JUNE 2014 PREPARED BY:. 125 COLLEGE STREET - 4TH FLOOR BURLINGTON, VERMONT 05401
GENERAL NOTES: LEGEND: SYMBOL DESCRIPTION G-0.1 STOCKPILED MATERIAL NOTES: GENERAL NOTES, LEGEND AND DRAWING INDEX 2
EXISTING SITE PLAN C-1.1 3
PROPOSED SITE PLAN C-1.2 NOTES: SITE PLAN 4
18" CORRUGATED HDPE BEDDING DETAIL FITTING "B" DETAIL FITTING "C" DETAIL ELEVATION VIEW DETAIL NOTES: SECTION A - C-2.1 RISER ELEVATION DETAIL A - STORAGE PLAN AND DETAILS PLAN UNDERGROUND STORAGE PLAN FITTING "D" DETAIL UNDERGROUND STORMWATER STORAGE CATCH BASIN INLET/OUTLET DETAIL 5
NOTES: BIORETENTION FACILITY SECTION A 6"Ø PERFORATED PIPE DETAIL C-3.1 PILOT CHANNEL DETAIL BIORETENTION PLAN AND SECTION BIORETENTION UNDERDRAIN SYSTEM DETAIL PLAN 6
NOTES: VEGETATED SWALE PLAN AND SECTION C-4.1 GRASS SWALE SECTION DETAIL PLAN 7
DRAINS TO WATERWAYS DO NOT POLLUTE DUCTILE IRON PVC CATCH BASIN DUCTILE IRON FRAME AND GRATE DETAIL NOTES: DETAIL-A LOCK-JOINT FLEXIBLE MANHOLE SLEEVE H-20 TOP SLAB KOR-N-SEAL JOINT SLEEVE MISCELLANEOUS DETAILS C-5.1 PRE-CAST REINFORCED CONCRETE CATCH BASIN & DROP INLET DETAIL PVC CATCH BASIN DETAIL WALL SLEEVE DETAIL PIPE CONNECTION TO MANHOLE DETAILS 8
EROSION CONTROL NOTES: SIDEWALK RAMP TYPE 6 DETAIL SIDEWALK RAMP TYPE 6 DETAIL CAST-IN-PLACE CONCRETE CURB TYPE B DETAIL SEDIMENTATION CONTROL AT CATCH BASIN MISCELLANEOUS DETAILS C-5.2 TYPICAL STORM DRAIN TRENCH DETAIL SILT FENCE DETAIL 9
NOTE: THE FURNISHING AND INSTALLATION OF ALL PLA ON THIS DRAWING SHALL BE BY SOUTH BURLINGTON. SEE NOTE 12 ON DRAWING L-200. THE CONTRACTOR SHALL BE RESPONSIBLE FOR ALL MATERIALS AND WORK NECESSARY TO PREPARE BEDS SHOWN ON DRAWING L-100 FOR PLANTING BY OTHERS. BENCHES BY SOUTH BURLINGTON JCSG(5) REFER TO RAIN GARDEN SOIL MIX ON DETAIL 3/ IE(16) NOTE: CONTRACTOR SHALL FIELD VERIFY SIDEWALK LAYOUT GEOMETRY AND COORDINATE FINAL LOCATION OF SIDEWALK RAMPS WITH LAYOUT OF HANDICAPPED PARKING PLACES PRIOR TO BEGINNING WORK. 13'-5" 23'-3" 5'-10" 3'-9 1 2 " 8'- 1 2 " JCHC 1 52 1 AVP(14) AD(8) DP(50) TMD(5) 3 AT(14) LSK(18) AM(16) H(20) ANC(20) AG(2) 2 +LP 303.5 304 S SS(24) S X RELOCATED BIKE RACK REMOVE APPLE PNS 3 30'-9 1 2 " 4'-6" (MATCH EXISTING SCORING AT ENTRANCE) 2% TO NORTH 24'-6 1 2 " 2 R5' +LP 303.5 304 32'-3" 5'-5" 3' S 10' 23'-10 1 2 " S 61'-10" 3' (TO TANGENT) REMOVE APPLES HKR(20) 25'-4" 5 X ANNUAL BED BY SOUTH BURLINGTON. SEE NOTE 9 ON DWG. NO. L-2OO. X EP(14) 4 LIMB EXISTING TREES NORTH OF PLAZA AND SIDEWALKS FOR INCREASED VISIBILITY OF BUILDING ENTRANCE 7 MATCH GRADE OF EXISTING ADJACENT SIDEWALK (TYP.) SEE NOTE 10 ON DWG. NO. L-200 6'-5 1 2 " 3' 16'-5" 5 R25' 12'-" 15'-6 2 1 " 7'-10" '-2 2 1 " 5'-6 2 1 " 9'-5" R3' 1'-9" R3' 9' 9' R89' 13'-6 2 1 " R5'-3" 8'-2 2 1 " R80' MIDPOINT OF ARC 4 FLAGPOLE ANNUAL BED. SEE NOTE 9 ON DWG. NO L-200. TREE PRESERVATION DETAILS 63'-7" 48'-2 1 2 " 40'-2" 7 & 8 BASELINE (BACK OF CURB) MEMORIAL PLAQUE BY SOUTH BURLINGTON R5' RELOCATE FLAG POLE AT CENTER OF 5'-3" RADIUS 12 TRANSITION TO DROPPED CURB. SEE NOTE 6 ON DWG. NO. L-200. LIMIT OF WORK FOR SIDEWALK, CURBS AND PAVING. 6 EXPANSION JOINT (TYP.) TRANSITION TO DROPPED CURB. SEE NOTE 6 ON DWG. NO. L-200. TRUNCATED DOMES DETAIL (TYP.) TANGENT 12 46'-2 1 2 " GRASS ISLAND. SEE NOTE 8 ON DWG. NO. L-200. 22'-4" R10' R8' 24' R32' 3' TANGENT R10' CONTRACTOR SHALL MOVE ELECTRIC TO CENTER OF GRASS ISLAND FOR FUTURE INSTALLATION. 46'-4 1 2 " E CAST-IN-PLACE CONCRETE CURB. SEE DETAILS ON DWG. NO. C-5.2. R100' MATCH GRADE OF EXISTING ADJACENT SIDEWALK. SEE NOTE 10 ON DWG. NO. L-200. TANGENT 3' 5'-6" 26'-2 1 2 " 50'-10" SITE LAYOUT AND PLANTING PLAN E E date revisions date Revised per South Burlington omments 04//2014 revisions T. J. Boyle Assoiates, LLC landsape arhitets planning onsultants 301 ollege street burlington vermont 05401 802 658 3555 http://www.tjboyle.om north JBO design by JBO heked by drawn by sale TKD 10/15/2013 date 1" = 10'-0" South Burlington City Hall Entryway sheet no: Site Layout & Planting Plan L-100 10
TREE PROTECTION NOTES : NOTES FOR L-100: 1. PRIOR TO ANY CONSTRUCTION ACTIVITY, ALL TREE PRESERVATION MEASURES MUST BE IMPLEMENTED. 2. PRIOR TO CONSTRUCTION CONTRACTOR SHALL VERIFY ALL UTILITY LOCATIONS. 3. TREE PROTECTION FENCING SHALL REMAIN INTACT THROUGHOUT ALL CONSTRUCTION ACTIVITY. 4. PRIOR TO THE SITE VISIT ALL TREE PRESERVATION AREAS SHALL BE STAKED OUT ON SITE BY SURVEY. 5. NO MATERIALS OR EQUIPMENT SHALL BE STORED, STOCKPILED OR OPERATED WITHIN TREE PROTECTION AREAS. 1. ALL NOTES AND DETAILS ON DRAWINGS L-100 AND L-200 APPLY TO THESE SHEETS ONLY. 2. CONTRACTOR SHALL REPAIR/RESTORE ALL LANDSCAPED AREAS IMPACTED BY CONSTRUCTION AS PER DRAWINGS L-100 AND L-200 AND AS PER SPECIFICATION SECTION 02900. 3. CONTRACTOR SHALL REPLACE/REPAIR PAVEMENT IMPACTED BY CONSTRUCTION AS PER SPECIFICATION SECTION 02500. 4. LIMIT OF PAVEMENT REPAIR/REPLACEMENT SHALL EXTEND 3' FROM THE EDGE OF NEW CURBS FOR THE ENTIRE LENGTH. 5. SEE DRAWING L-200 FOR DETAILS FOR NEW SIDEWALK. EAST JORDAN IRON WORKS, INC. 301 SPRING STREET EAST JORDAN, MI 49727-0439 TOLL FREE: 1-800-626-4653 PHONE: (231)-536-2261 FAX: (231)-536-4458 www.ejiw.om PRUNE TO REMOVE DEADWOOD & CROSSING BRANCHES. USE WIDE BELT TYPE TIES ON EACH MAJOR STEM.ALL MAJOR STEMS SHOULD BE BELTED TOGETHER.DO NOT USE ROPE OR WIRE IN HOSE SLEEVES. ROOT FLARE SHALL BE PLANTED AT OR SLIGHTLY ABOVE FINAL GRADE (DUE O NURSERY PRACTICES, THIS MAY REQUIRE REMOVING SOIL FROM THE TOP OF THE ROOT BALL TO LOCATE THE ROOT FLARE). 6. TREE PROTECTED AREAS WILL BE LEFT AS NATURAL AS POSSIBLE. 7. THE CONTRACTOR CHOSEN FOR THIS WORK WILL BE AN EXPERIENCED TREE SERVICE FIRM THAT HAS SUCCESSFULLY COMPLETED TREE PROTECTION, ROOT PRUNING, AND TRIMMING WORK, SIMILAR TO THAT REQUIRED FOR THIS PROJECT. 8. IN AREAS OF EXCAVATION NEAR TREE, IDENTIFY AND CUT ROOTS IN CONSULTATION WITH OWNER. 9. REMOVE POORLY ATTACHED AND RUBBING LIMBS. CLEAN THE CROWN OF DEAD, DISEASED AND WEAK LIMBS. THINNING OF HEALTHY LIMBS IS NOT RECOMMENDED AT THIS TIME. 10. ANY NECESSARY TRENCHING SHALL BE IMMEDIATELY BACKFILLED WITH REMOVED SOIL OR OTHER HIGHLY ORGANIC SOIL.. AN AIR SPADE IS TO BE USED TO EXCAVATE DOWN TO MINIMUM OF 2', SEE DETAIL7B/. 12. THERE WILL BE NO EXCAVATION FOR PROPOSED SITE WORK WITHIN FENCED AREA. 8' MAX 6. SEE SIDEWALK RAMP - TYPE 6 DETAILS ON C-5.2 FOR SIDEWALK TRANSITION TO DROPPED CURB. 7. SEE DETAILS ON DRAWING C-5.2 FOR NEW CAST-IN-PLACE CURBS ALONG NEW SIDEWALK AND AT NEW GRASS ISLAND. 8. LANDSCAPING AT NEW GRASS ISLAND SHALL BE AS PER SPECIFICATION SECTION 02900. 9. CONTRACTOR SHALL FURNISH AND INSTALL 18 MINIMUM DEPTH OF PLANTING MIX AT FLAGPOLE ANNUAL BED TO GRADE LEVEL. PLANTING MIX SHALL BE AS PER SPECIFICATION SECTION 02900. 10. CONTRACTOR SHALL FIELD VERIFY SIDEWALK LAYOUT GEOMETRY PRIOR TO BEGINNING OF WORK. NEW SIDEWALK MUST MATCH UP WITH EXISTING SIDEWALKS AND DRIVEWAY ENTRANCE.. CONTRACTOR SHALL REMOVE AND RELOCATE ANY EXISTING STRUCTURES, SUCH AS MAIL POST OFFICE BOX, SIGNS, ETC. IMPACTED BY CONSTRUCTION OF NEW SIDEWALK. 12. ALL TREES, SHRUBS AND PLA SHOWN ON THE LANDSCAPING PLAN AND SCHEDULE ON DRAWING L-100 SHALL BE FURNISHED AND INSTALLED BY SOUTH BURLINGTON AND ARE OUTSIDE OF THE SCOPE OF THIS CONTRACT. THE CONTRACTOR SHALL BE RESPONSIBLE FOR ALL MATERIALS AND WORK NECESSARY TO PREPARE BEDS SHOWN ON DRAWING L-100 FOR PLANTING BY OTHERS. NOTE FOR L-200: SIGN DETAIL 1. ATTACHME OF SIGNS TO TREES IS PROHIBITED. 2. SIGNS SHOULD BE MADE OF VINYL OR PLASTIC. 3. SIGNS SHOULD BE PROPERLY MAINTAINED, PENALTIES WILL BE ENFORCED FOR REMOVAL OF SIGNS. 4. AVOID INJURY TO ROOTS WHEN PLACING POSTS FOR THE SIGNS. 5. SIGNS SHOULD BE POSTED 50' O.C. AND WITHIN 20' OF THE BEGINNING AND END OF EACH FENCE TO BE VISIBLE TO ALL CONSTRUCTION PERSONNEL. 6. SIGNS TO BE SECURELY FASTENED TO THE FENCE OR FENCE POSTS. 7. SIGNS TO HAVE A WHITE BACKGROUND AND ORANGE OR RED TEXT. 1. ALL NOTES AND DETAILS ON DRAWINGS L-100 AND L-200 APPLY TO THESE SHEETS ONLY. 2" STEEL OR WOOD POST HIGHLY VISIBLE FLAGGING SECURE FENCE TO HORIZONTAL 2"X4" ALONG TOP PRODUCT NUMBER 7005-7 DESIGN FEATURES MATERIALS: PLATE-GRAY IRON ASTM A48 CL35B DESIGN LOAD: HEAVY DUTY COATING: UNDIPPED DESIGN INTENT COMPLIANT WITH ADA ACCESSIBILITY GUIDELINES SLIP RESISTANT SURFACE CORROSION RESISTANCE MAINTENANCE FREE SIMPLIFIED INSTALLATION NOTES: 1. INSTALLATION TO BE COMPLETED IN ACCORDANCE WITH MANUFACTURER'S SPECIFICATIONS. 2. DO NOT SCALE DRAWINGS. 3. CONTRACTORS NOTE: FOR PRODUCT AND COMPANY INFORMATION VISIT www.caddetails.om/info REFERENCE NUMBER 978-003. DURALAST DETECTABLE WARNING SURFACE DWP 24X24 SECTION B-B 1 5/16" 2 3/4" LETTERED TAG AREA (OPTIONAL) BOTTOM VIEW (4) Ø3/4" VENT HOLES A ANCHOR LUG (2 PLACES) NON-SLIP SURFACE ON BOTH PLATE & BUTTONS B B SECTION A-A Ø.90" Ø.56" 24" SQ. 2 3/16" BUTTON DETAIL A 4 3 TIMES DIAMETER OF ROOT BALL MULTI-STEM PLANTING RAIN GARDEN SOIL MIX (2' DEPTH MINIMUM) ph RANGE ORGANIC MATTER SAND SILT CLAY 5.2 TO 7.0 1.5 TO 4.0% 35-60% 30-55% 10-25% NOTE: PLACEMENT OF PLANTING SOIL SHOULD BE IN 12" LIFTS, LOOSELY COMPACTED (LIGHTLY TAMPED WITH BACKHOE BUCKET). LAWN 2"- 3" FINE CHIPPED BARK MULCH, NOT MORE. DO NOT PLACE MULCH DIRECTLY AGAINST STEMS. 2" EARTH SAUCER. 2" X 2" X 18" HARDWOOD STAKES 3 PER TREE DRIVEN INTO GROUND. (STAKING TO BE REMOVED ONE YEAR AFTER PLANTING.) AMEND BACKFILL AS SPECIFIED, BREAK UP CLODS AND REMOVE DEBRIS AND STONES. SCARIFY SUBGRADE TO 4". UNDISTURBED OR COMPACTED SOIL MOUND. CUT & REMOVE ALL OF THE WIRE BASKET, EXCEPT THAT WHICH IS UNDER THE ROOT BALL. LEAVE NO BURLAP EXPOSED ABOVE THE SOIL SURFACE. REMOVE BURLAP FROM THE TOP 1/2 OF ROOT BALL IF BURLAP IS MADE OF NATURAL FIBER. IF BURLAP IS PLASTIC OR TREATED, CUT AND REMOVE ALL BUT THAT WHICH IS UNDER THE ROOT BALL. PLANT EDGE LAWN PER PLAN, 1" REVEAL MAX 2"-3 FINE CHIPPED BARK MULCH, NO MORE. DO NOT COVER FOLIAGE. REFER TO SPECIFICATIONS. 18" MINIMUM PLANT BED DEPTH CONTAINING 2/3 TOPSOIL AND 1/3 COMPOST MIX. (FOR RAIN GARDEN PLANTING SOIL MIX SEE TABLE ABOVE) UNDISTURBED OR COMPACTED SOIL. ORANGE MESH SNOW FENCE 978-003 PROTECTED BY COPYRIGHT - /17/09 www.caddetails.om 8" WIRE "U" TO SECURE BOTTOM OF FENCE 6 TRUNCATED DOMES DETAIL 1/3 TOTAL HT. 4' ANCHOR POST MUST BE INSTALLED TO A DEPTH OF NO LESS THAN 1/ 3 OF THE TOTAL HEIGHT OF THE POST. 4000 PSI CONCRETE BROOM FINISH 3 PLANT BED DETAIL SIGN, SEE DETAIL B ABOVE. 8 TYPICAL PROTECTIVE FENCE DETAIL RETENTION AREA 7 TREE PROTECTION DETAIL FENCE NOTES: 1. THIS FENCE SERVES AS A TREE PROTECTION DEVICE ONLY. 2. ROOT DAMAGE SHALL BE AVOIDED WITHIN FENCED AREA. 3. FENCE SHALL BE MAINTAINED THROUGHOUT CONSTRUCTION. ROOT PRUNING TRENCH NOTES: 1. USE AN AIR SPADE TO DIG THE 2' TRENCH AND EXPOSE THE ROOTS. 2. EXPOSED ROOTS SHOULD BE CUT WITH A SAW OR LOPPERS TO MAKE A CLEAN SMOOTH CUT, NOT TORN OR RIPPED. 3. MULCH EXPOSED ROOTS DURING THE CUTTING PROCESS TO KEEP FROM DRYING OUT. 4. BACKFILL TRENCH WITH MIXTURE OF TOPSOIL AND COMPOST. 1' EXPOSED ROOTS IN TRENCH DRIPLINE OF TREE 1' TREE PROTECTION FENCE PLACED AT EDGE OF SIDEWALK, CURB, OR 1' BEYOND DRIPLINE OR FURTHER, IF POSSIBLE. ROOT PRUNING TRENCH MIN 2' DEEP, SEE BLOW UP TRENCH DETAIL B ABOVE. AIR SPADE TO BE USED TO DIG 2' TRENCH CLEAN CUT TREE ROOTS 5 GENERAL PLANTING NOTES: 1. THE CONTRACTOR SHALL LOCATE AND VERIFY THE EXISTENCE OF ALL UTILITIES PRIOR TO STARTING WORK. 2. THE CONTRACTOR SHALL SUPPLY ALL PLANT MATERIAL IN QUANTITIES SUFFICIENT TO COMPLETE THE PLANTING SHOWN ON ALL DRAWINGS. 5" CONCRETE 4X4-W6.0 X W6.0 WELDED WIRE MESH 12" MIN. CRUSHED GRAVEL COMPACTED OR UNDISTURBED SOIL 140N (MIRAFI) FILTER FABRIC NOTES: - PROVIDE EXPANSION JOINT EVERY 25' - PROVIDE CONTROL JOI AS SHOWN ON PLAN, 1/4-1/3 THICKNESS OF SLAB - DO NOT USE CALCIUM CHLORIDE OR OTHER MATERIALS CONTAINING ANTIFREEZE OR CHEMICAL ACCELERATORS. - AIR CONTENT: 5-7% AIR ENTRAINMENT - MAXIMUM WATER-CEMENTITIOUS MATERIALS RATIO: 0.50 - SLUMP LIMIT: 3-4" PRIOR TO ANY WATER REDUCING ADDITIVE CONCRETE PAVING DETAIL 3. ALL MATERIAL SHALL CONFORM TO THE GUIDELINES ESTABLISHED BY THE CURRENT AMERICAN STANDARD FOR NURSERY STOCK (ANSI) PUBLISHED BY THE AMERICAN ASSOCIATION OF NURSERYMEN. 4. NO PLANT SHALL BE PUT INTO THE GROUND BEFORE ROUGH GRADING HAS BEEN FINISHED AND APPROVED BY THE PROJECT LANDSCAPE ARCHITECT OR EQUAL. 5. PLA SHALL BE INSTALLED SUCH THAT THE ROOT FLARE IS AT OR SLIGHTLY ABOVE FINAL GRADE (DUE TO NURSERY PRACTICES THIS MAY REQUIRE REMOVING SOIL FROM THE TOP OF THE ROOT BALL TO LOCATE THE ROOT FLARE. 6. ALL PLA SHALL BE BALLED AND BURLAPPED OR CONTAINER GROWN AS SPECIFIED. NO CONTAINER GROWN STOCK WILL BE ACCEPTED IF IT IS ROOT BOUND. ALL ROOT WRAPPING MATERIAL MADE OF SYNTHETICS OR PLASTICS SHALL BE REMOVED AT THE TIME OF PLANTING. 7. WITH CONTAINER GROWN STOCK, THE CONTAINER SHALL BE REMOVED AND THE CONTAINER BALL SHALL BE CUT THROUGH THE SURFACE IN TWO VERTICAL LOCATIONS. 9. LANDSCAPE ARCHITECT MAY REQUIRE ALL PLA BE SPRAYED WITH AN ANTIDESSICANT WITHIN 24 HOURS AFTER PLANTING. IN TEMPERATE ZONES, ALL PLA SHALL BE SPRAYED WITH AN ANTIDESSICANT AT THE BEGINNING OF THEIR FIRST WINTER. 10. ALL PLANT BEDS MUST HAVE A MINIMUM PLANT BED DEPTH OF 18" WITH A 2/3 TOPSOIL TO 1/3 COMPOST MIX. REMOVE SUBGRADE AND OTHER FILL IN PLANTING AREAS ON SITE.. ALL PLA SHALL BE INSTALLED AS PER DETAILS AND THE CONTRACT SPECIFICATIONS. 12. STAKING PLA IS AT THE DISCRETION OF THE CONTRACTOR. ONLY STAKE PLA AS SPECIFIED BY LANDSCAPE ARCHITECT. 13. THE LANDSCAPE CONTRACTOR SHALL PROVIDE AMENDED BACKFILL AS PER THE CONTRACT SPECIFICATIONS. 14. ALL PLA SHALL BE WATERED THOROUGHLY TWICE DURING THE FIRST 24 HOUR PERIOD AFTER PLANTING. ALL PLA SHALL THEN BE WATERED WEEKLY, IF NECESSARY, DURING THE FIRST GROWING SEASON. 15. THE LANDSCAPE CONTRACTOR SHALL REFER TO THE CONTRACT SPECIFICATIONS FOR ADDITIONAL REQUIREME. 16. THE LANDSCAPE CONTRACTOR SHALL REFER TO THE PLANT LIST FOR SEASONAL REQUIREME RELATED TO THE TIME OF PLANTING. 2 1 SHRUB PLANTING 3 TIMES DIAMETER OF ROOT BALL 3 TIMES DIAMETER OF ROOT BALL DECIDUOUS TREES < 3" CALIPER PRUNE TO REMOVE DEADWOOD & CROSSING BRANCHES. TOP OF ROOTBALL TO BE SAME HEIGHT AS PREVIOUSLY GROWN. 2" FINE CHIPPED, PINE BARK MULCH, NOT MORE. DO NOT PLACE AGAINST PLANT STEM. 2" EARTH SAUCER. AMEND BACKFILL AS SPECIFIED, BREAK UP CLODS AND REMOVE DEBRIS AND STONES. REMOVE BURLAP FROM TOP 1/3 OF ROOTBALL. NEVER LEAVE BURLAP EXPOSED ABOVE SOIL. IF CONTAINER GROWN, REMOVE POT COMPLETELY. LOOSEN ROOT MASS TO PREVENT GIRDLING. UNDISTURBED OR COMPACTED SOIL MOUND. PRUNE DAMAGED OR BROKEN BRANCHES. USE WIDE BELT-TYPE TREE TIES; DO NOT USE ROPE OR WIRE IN HOSE SLEEVES. REUSABLE PERFORATED PLASTIC TREE WRAP (TO BE REMOVED ONE YEAR AFTER PLANTING). 3 2" X 2" HARDWOOD STAKES 1/3 HEIGHT OF TREE OR MIN. OF 72". ALLOW FOR A DEPTH OF 12" BELOW UNDISTURBED GRADE. (STAKING TO BE REMOVED ONE YEAR AFTER PLANTING.) INSTALL STAKES PLUMB. ROOT FLARE SHALL BE PLANTED AT OR SLIGHTLY ABOVE FINAL GRADE (DUE TO NURSERY PRACTICES, THIS MAY REQUIRE REMOVING SOIL FROM THE TOP OF THE ROOT BALL TO LOCATE THE ROOT FLARE). 2"-3" FINE CHIPPED BARK MULCH, NOT MORE. DO NOT PLACE MULCH DIRECTLY AGAINST TRUNK. 2" EARTH SAUCER. AMEND BACKFILL AS SPECIFIED, BREAK UP CLODS AND REMOVE DEBRIS AND STONES. SCARIFY SUBGRADE TO 4". CUT & REMOVE ALL OF THE WIRE BASKET, EXCEPT THAT WHICH IS UNDER THE ROOT BALL. LEAVE NO BURLAP EXPOSED ABOVE THE SOIL SURFACE. REMOVE BURLAP FROM THE TOP 1/2 OF ROOT BALL IF BURLAP IS MADE OF NATURAL FIBER. IF BURLAP IS PLASTIC OR TREATED, CUT AND REMOVE ALL BUT THAT WHICH IS UNDER THE ROOT BALL. PLANTING AND SITE DETAILS 8. THE DAY PRIOR TO PLANTING, THE LOCATION OF ALL TREES AND SHRUBS SHALL BE STAKED FOR APPROVAL BY THE PROJECT LANDSCAPE ARCHITECT OR EQUAL. revisions date revisions date T. J. Boyle Assoiates, LLC landsape arhitets planning onsultants 301 ollege street burlington vermont 05401 802 658 3555 http://www.tjboyle.om north MJB design by MJB heked by drawn by sale TKD 10/15/2013 date 1" = 10'-0" South Burlington City Hall Entryway sheet no: Planting & Site Details L-200