Annex of the Certificate (Page 1/7) Scope of Accreditation As a "Type A" Inspection Body Address : Şerifali Mah. Açıkyüz Sok. No:2-3 Ümraniye 34775 İSTANBUL/TÜRKİYE Phone : 0 216 313 14 20 Fax : 0 216 313 14 33 E-mail : info@inspecco.com Website : www.inspecco.com Product Family, Product / Intended Use Inspection Type / Modules Standards / Specification / Explanations Metal Pipes Metal machined parts - Sheets - Pipes - Lamas - Profiles Plastic pipes and fitting parts - PE Pipes - Hdpe pipes - PVC-U pipes - Pp Pipes - Pex pipes - Spiral pipes - Korrige pipes - Ctp Pipes Control of Manufacturing Process Material Evaluation and Approval Control of manufacturing process Material assessment API 5L, BS 534, EN 545 EN 10204, EN 10217, EN ISO 3183, EN 10219, EN 10025, EN 10028, EN 10216, EN 10222, ASTM A106, ASTM A312, ASTM A333, ASTM A 36, ASTM A 53, ASTM A 283, ASTM A 516, ASTM A 517 TS EN 1555-2, TS EN 12201-1, TS EN 12201-2+A1, TS EN 12201-3+A1, CEN/TS 12201-7, TSE CEN ISO/TS 15874-7, TS 10762-2 EN ISO 15875-2, TS 11794, TS EN ISO 1452-2,TS EN ISO 1452-3, TS 12132, TS EN 1329-1, TSE CEN/TS 1329-2, DIN 16961-1, DIN 16961-2, TS EN 13476-1, TS EN 13476-2, TS EN 13476-3+A1
Annex of the Certificate (Page 2/7) Scope of Accreditation Lifting Equipment 1.A.1. Crane 1.A.1.1 Overhead Travelling Crane 1.A.1.2 Portal Crane 1.A.1.3 Monarail Crane 1.A.1.4 Mobile Crane 1.A.1.5 Tower Crane 1.A.1.6 Loader Crane 1.A.1.9 Jib Crane 1.A.1.10 Portal and Foldable Crane with Legs 1.A.1.11 Rotating Jib Crane 1.A.2 Chain Hoist 1.A.3 Platform 1.A.3.1 Mobile Elevating Work Platform 1.A.3.2 Suspended Access Equipment 1.A.3.2 Mast Climbing Work Platform 1.A.6 Jacks 1.A.7 Puller 1.A.7.1 Cable Puller 1.A.7.2 Chain Puller 1.A.8 Transpallet 1.A.10 Forklift 1.A.11 Escalator 1.A.12 Moving Walks 1.A.19 Builders Hoists Marine transportation vessels and ports roadway and railway transport vehicles, Container Ship - Train - Truck Product Loading/ Unloading, Weighbridge, Scoring(Qty) inspections, Damage Control and Warehouse Cleaning inspections Regulation Concerning the Conditions on Health and Safety during the use of Professional Equipment. I-G-P-20 Inspecco Ship - Train - Truck Procedure
Annex of the Certificate (Page 3/7) Scope of Accreditation 2. Pressure Vessels 2.A.1. Industrial Autoclave 2.A.2. Pressure vessels & Air receivers 2.A.3. Compressor Air Tank 2.A.4. Hydrofor / Expansion Tank 2.A.5. Steam Generator 2.A.6. Boiler / Accumulation Tank 2.A.7. Liquefied Gas Tanks 2.A.8. Cryogenic Tanks 2. Pressure Vessels 2.B.1. Unfired Pressure Vessels 2.B.2. Low Pressure Storage Tanks 2.B.3. Unfired, Pressurized Tanks Designed to Store Air or Nitrogen 2.B.6. Welded Steel Tanks for Liquefied Petroleum Gas (LPG) - Road Tankers 2.B.7. Closed expansion vessels with built in diaphragm for installation in water 2.C.9. Pressurized Metallic Tanks for the Transport of Hazardous Materials Welded Manufacturing Manufacturing and assembly process control -Manufacturing process control -Evaluation and Approval of Welding Procedures Regulation Concerning the Conditions on Health and Safety during the use of Professional Equipment AD-2000 EN 13445 EN 12493 EN 14025 EN 12972 EN 13094 EN 286-1 EN 13831 ASME Sec. VIII Div.1 API 620 EN ISO 15614, API 1104, ASME SECTION IX, AWS D.1.1, AWSD.1.5, AD-2000 HP 2/1, EN 15609 4.A.1. Atmospheric Storage Tanks Regulation Concerning the Conditions on Health and Safety during the use of Professional Equipment 4.C.1 Atmospheric Storage Tanks Lifts - Electrically Driven - Hydraulic Driven Manufacturing and Assembly Process Control API 650 Elevator Operation, Maintenance and Regulation The Communique In Respect Of Type A Inspection Bodies Which Will Authorised For Elevator s
Annex of the Certificate (Page 4/7) Scope of Accreditation 3. Boilers 3.A.1. Steam boilers 3.A.2. Heater / Hot Water Boilers 3.a.4. Hot Oil Boiler 3.A.7. Hot Water Boilers 3. Boilers 3.C.1. Power Boilers 3.C.3. Steam Boilers 3.C.5. Burned Boiler 3.C.6. Water Tube Boilers 3.C.7. Cylindrical Boilers Fire Pumps Electical Grounding measurements Manufacturing Process Control Post Manufacturing Performance Test Regulation Concerning the Conditions on Health and Safety during the use of Professional Equipment EN 12952, EN 12953, ASME Sec. I. NFPA 20 Grounding of Electrical Installations Regulations, Electrical Internal Installations Regulations, Electrical Internal Installations Electrical Internal Installations Regulations, TS EN 61439-1, Electrical Internal Installations Regulations, TS EN 61439-1, Control of Electric Panel TS 5141 EN 12954, TS EN 13509, Cathodic Protection Measurement TS EN 62305-1, TS EN 62305-3 TS HD 60364-6 TS HD 60364-6 Lightning Conductor Control TS HD 60364-6 Insulation Resistance Continuity Test Leakage Current Test
Annex of the Certificate (Page 5/7) Scope of Accreditation Gas Burning Appliances -Commercial-type Cooking Appliances -Custom-designed Industrial Equipment -Boiler Room and Heat Centre Chimneys 5. Fire Protection Systems 5.A.1. Sprinkler Systems 5.A.2. Fire Water Storage 5.A.3. Fire Pump Station 5.A.4. Fire Hydrant System 5.A.5. Fire Cabinet System 5.A.6. Foam Extinguishing Systems 5.A.9. Portable Fire Fighting Tube Placement 5.A.10. Detection Alarm Systems 5.A.11. Clean Gas Automatic Extinguishing Systems 5.A.12. CO2 Gas Automatic Extinguishing Systems 5.A.13. Dry / Liquid Chemical Automatic Extinguishing Systems 5.A.14. Emergency Lighting and Routing Systems Metal Structures Layout Conformity Inspection Design and Assembly Examinations Leaktightness Tests Leak tightness Tests Manufacturing and Assembly Control Republic of Turkey Energy Market Regulatory Authority (EMRA) Domestic Gas Installation Regulation, Regulation Concerning Fire Protection of Buildings, Communique for Construction Works, Machinery and Electrical Installations General Technical Specifications, TS 7363 TS EN 13384-1 TS EN 13384-2 TS EN 15287-1+A1 TS EN 15287-2 TS 7363 TS EN 13384-1, TS EN 13384-2, TS EN 15287-1+A1, TS EN 15287-2, TS 7363 TS EN 15287-1+A1, TS EN 15287-2, TS 7363 Regulation Concerning the Conditions on Health and Safety during the use of Professional Equipment Regulation Concerning Fire Protection of Buildings TS EN 1090-2, TS EN 1090-3 AWS D1.1, AWS D1.5
Annex of the Certificate (Page 6/7) Scope of Accreditation Non-Destructive Testing (NDT) Ultrasonic Inspection ASME Sec.V, ASME B 31.1, ASME B 31.3, ASME B 31.8, ASME Sec.VIII, API 1104, API 650, API 5L, EN 10160, ASTM A435, ISO 10893-8, ISO 10893-9, ISO 10893-10, ISO 10893-11, ISO 10893-12, TS EN ISO 5817, EN ISO 11666, EN ISO 23279, EN ISO 17640, TS EN 10228-3, TS EN 12680-1, AWS D1.1, AWS D.1.5, AD 2000 CODE HP5/3 Non-Destructive Testing (NDT) (con't) Liquid Penetrant Inspection Evaulation and Approval of Radiographic Films Magnetic Particle Inspection Visual Inspection ASME Sec.V, ASME B 31.1, ASME B 31.3, ASME B 31.8, ASME Sec.VIII, API 1104, API 650, API 5L, TS EN ISO 5817, TS EN ISO 3452, EN ISO 23277, TS EN 10228-2, TS EN 1371-2, ISO 10893-4, AWS D1.1, AWS D.1.5, AD 2000 CODE HP5/3 ASME Sec.V, ASME B 31.1, ASME B 31.3, ASME B 31.8, ASME Sec.VIII, API 1104, API 650, API 5L, ASTM A446, TS EN ISO 5817, TS EN ISO 17636, TS EN ISO 10675,TS EN 12681, TS EN ISO 5579, ISO 10893-6, ISO 10893-7, ASTM III Vol 03.03, AWS D1.1, AWS D.1.5, AD 2000 CODE HP5/3 ASME Sec.V, ASME B 31.1, ASME B 31.3, ASME B 31.8, ASME Sec.VIII, API 1104, API 650, API 5L, TS EN ISO 5817, EN ISO 17638, EN ISO 23278, TS EN 10228-1, EN 1369, ISO 10893-5, AWS D1.1, AWS D.1.5, AD 2000 CODE HP5/3 ASME Sec.V, ASME B 31.1, ASME B 31.3, ASME B 31.8, ASME Sec.VIII, API 1104, API 650, API 5L, TS EN ISO 5817, EN ISO 17637, AWS D.1.5, AD 2000 CODE HP5/3
Annex of the Certificate (Page 7/7) Scope of Accreditation Pipelines Manufacturing Assembly Process Control API 1104, API 5L, ASME B 31.4, ASME B 31.8 Piping Manufacturing and Assembly Process Control End of Scope ASME B31.1 ASME B31.3 API 570 API 574 API 579 API 580 API 581 Dr. H. İbrahim ÇETİN Secretary General
Annex of the Certificate (Page 1/1) As a "Type A" Inspection Body Address : Şerifali Mah. Açıkyüz Sok. No:2-3 Ümraniye 34775 İSTANBUL/TÜRKİYE Phone Fax E-mail : 0 216 313 14 20 : 0 216 313 14 33 : info@inspecco.com Website : www.inspecco.com 92/42/EEC Hot-Water Boilers New Hot-Water Boilers EC Type-Examination (Module B) Conformity to Type (Module C) End of Scope 92/42/EEC Hot-Water Boilers Directive Annex III 92/42/EEC Hot-Water Boilers Directive Annex IV Dr. H. İbrahim ÇETİN Secretary General
Annex of the Certificate (Page 1/3) As a "Type A" Inspection Body Address : Şerifali Mah. Açıkyüz Sok. No:2-3 Ümraniye 34775 İSTANBUL/TÜRKİYE Phone Fax E-mail : 0 216 313 14 20 : 0 216 313 14 33 : info@inspecco.com Website : www.inspecco.com 2006/42/EC Machinery 1. Circular saws (single- or multi-blade) for working with wood and material with similar physical characteristics or for working with meat and material with similar physical characteristics, of the following types: 1.1. sawing machinery with fixed blade(s) during cutting, having a fixed bed or support with manual feed of the workpiece or with a demountable power feed; 1.2. sawing machinery with fixed blade(s) during cutting, having a manually operated reciprocating saw-bench or carriage; 1.3 sawing machinery with fixed blade(s) during cutting, having a built-in mechanical feed device for the workpieces,with manual loading and/or unloading; EC type-examination 2006/42/EC Machinery Directive Annex IX
Annex of the Certificate (Page 2/3) 2006/42/EC Machinery Product Family, Product / Intended Use 1.4. sawing machinery with movable blade(s) during cutting, having mechanical movement of the blade, with manual loading and/or unloading. 4. Band-saws with manual loading and/or unloading for working with wood and material with similar physical characteristics or for working with meat and material with similar physical characteristics, of the following types: 4.1. sawing machinery with fixed blade(s) during cutting, having a fixed or reciprocating-movement bed or supportvfor the workpiece; 4.2. sawing machinery with blade(s) assembled on a carriage with reciprocating motion. Inspection Type / Modules EC type-examination Standard / Specification / Explanations 2006/42/EC Machinery Directive Annex IX
Annex of the Certificate (Page 3/3) 2006/42/EC Machinery Product Family, Product / Intended Use 5. Combined machinery of the types referred to in points 1 to 4 and in point 7 for working with wood and material with similar physical characteristics. 6. Hand-fed tenoning machinery with several tool holders for woodworking. 7. Hand-fed vertical spindle moulding machinery for working with wood and material with similar physical characteristics. 9. Presses, including press-brakes, for the cold working of metals, with manual loading and/or unloading, whose movable working parts may have a travel exceeding 6 mm and a speed exceeding 30 mm/s 16. Vehicle servicing lifts 17. Devices for the lifting of persons or of persons and goods involving a hazard of falling from a vertical height of more than three metres Inspection Type / Modules EC type-examination EC type-examination End of Scope Standard / Specification / Explanations 2006/42/EC Machinery Directive Annex IX 2006/42/EC Machinery Directive Annex IX Dr. H. İbrahim ÇETİN Secretary General
Annex of the Certificate (Page 1/1) As a "Type A" Inspection Body Address : Şerifali Mah. Açıkyüz Sok. No:2-3 Ümraniye 34775 İSTANBUL/TÜRKİYE Phone Fax E-mail : 0 216 313 14 20 : 0 216 313 14 33 : info@inspecco.com Website : www.inspecco.com 2009/142/EC (ex-90/396/eec) Appliances Burning Gaseous Fuels Appliances Burning Gaseous Fuels Appliances (burning gaseous fuels) - Cooking appliances - Space heating appliances - Appliances for hot water production EC Type Examination (Module B) EC Declaration Of Conformity To Type (Module C) EC Verification EC Unit Verification Module B: EU Type-Examination - Production Type Module C2: Conformity To Type Based On Internal Production Control Plus Supervised Product Checks At Random Intervals 2009/142/EC Appliances Burning Gaseous Fuels Directive Annex II.1 2009/142/EC Appliances Burning Gaseous Fuels Directive Annex -II.2 2009/142/EC Appliances Burning Gaseous Fuels Directive Annex -II.5 2009/142/EC Appliances Burning Gaseous Fuels Directive Annex -II.6 2016/426/EU Gas Appliances Regulation Annex III Module F: Conformity To Type Based On Product Module G: Conformity Based On Unit Verification End of Scope Dr. H. İbrahim ÇETİN Secretary General
Annex of the Certificate (Page 1/1) As a "Type A" Inspection Body Address : Şerifali Mah. Açıkyüz Sok. No:2-3 Ümraniye 34775 İSTANBUL/TÜRKİYE Phone Fax E-mail : 0 216 313 14 20 : 0 216 313 14 33 : info@inspecco.com Website : www.inspecco.com 2014/33/EU Lifts and safety components for lifts Lifts EU-type examination of lifts (Module B) Annex IV-B Conformity Based on Unit Verification for Lifts (Module G) Final Inspection for Lifts End of Scope Annex VIII Annex V Dr. H. İbrahim ÇETİN Secretary General
Annex of the Certificate (Page 1/1) As a "Type A" Inspection Body Address : Şerifali Mah. Açıkyüz Sok. No:2-3 Ümraniye 34775 İSTANBUL/TÜRKİYE Phone Fax E-mail : 0 216 313 14 20 : 0 216 313 14 33 : info@inspecco.com Website : www.inspecco.com 2014/68/EU Pressure Equipment Directive Pressure Equipments Internal production control plus supervised pressure equipment checks at random intervals EU-Type examination - production type EU-Type examination - design type Conformity to type based on internal production control plus supervised pressure equipment checks at random intervals Conformity to type based on pressure equipment verification Conformity based on unit verification Approval of permanent joining personnel Approval of permanent joining procedures End of Scope Module A2 - Annex III Module B - Annex III Module B- Annex III Module C2 - Annex III Module F - Annex III Module G - Annex III Annex I, 3.1.2 Annex I, 3.1.2 Dr. H. İbrahim ÇETİN Secretary General
Annex of the Certificate (Page 1/1) As a "Type A" Inspection Body Address : Şerifali Mah. Açıkyüz Sok. No:2-3 Ümraniye 34775 İSTANBUL/TÜRKİYE Phone Fax E-mail : 0 216 313 14 20 : 0 216 313 14 33 : info@inspecco.com Website : www.inspecco.com 2014/29/EU Simple pressure vessels Simple Pressure Vessels EU-Type examination (Module B) Conformity to type based on internal production control (Module C) Conformity to type based on internal production control plus supervised vessel testing (Module C1) Conformity to type based on internal production control plus supervised vessel checks at random intervals (Module C2) End of Scope 2014/29/EU Annex-II Dr. H. İbrahim ÇETİN Secretary General