InRow Direct Expansion Close-coupled, air, water, and glycol cooling for closets, server rooms, and data centers Up to kw > Row-Based Cooling InRow SC, 00mm InRow RD, 00mm The InRow Direct Expansion product design closely couples the cooling with the IT heat load. This design prevents hot air recirculation, while improving cooling predictability and allowing for a pay as you grow environment. IT operators looking to improve efficiency or deploy higher density equipment will benefit from the modular design of the InRow Direct Expansion products. The intelligent controls of the InRow Direct Expansion products actively adjust fan speed and refrigerant flow to match the IT heat load to maximize efficiency and address the dynamic demands of today's IT environments. To meet the diverse requirements of IT environments, the InRow Direct Expansion products are available in a wide range of sizes and heat rejection methods. The InRow SC is a selfcontained unit in a 00 mm wide cabinet. The InRow RD 00mm units are available in air cooled and fluid cooled models. The 00mm units are air cooled only and have a precision cooling versions with humidifiers and reheat. InRow RD, 00mm
Features/Benefits Availability > Active Response Controls monitor and actively adjust cooling capacity to ensure proper server inlet temperatures > Variable Speed Compressors or Hot Gas Bypass allows for low load handling capabilities > Placing the unit in the row of racks moves the source of cooling closer to the heat load. This eliminates air mixing and provides a predictable cooling architecture Total Cost of Ownership >Close Coupled Cooling improves operational efficiency 0%- 0% over traditional data center cooling approaches > Variable Speed Fans reduce energy consumption during offpeak cooling periods and adapt to unpredictable power densities Flexibility >Adapts to work in both new and existing data center environments >Multiple Heat Rejection Methods Flexibility to deploy in a variety of configurations including air and fluid based designs Serviceability > Modular components simplify replacement and reduce mean time to repair >System remains operational during fan replacement (00mm only) > Row based equipment allows for all serviceable components to be replaced/maintained in the hot or cold aisles > Retractable electronics module for easy service (RD 00mm only) > Easy to maintain, cleanable, deep loading mesh filter removes particles from the return air stream Manageability > Real time display of current and available cooling > StruXureware DCIM compatible > Microprocessor controller color touch screen display > Building management system integration
InRow SC Air cooled, self-contained row-based cooling for closets and server rooms. Up to kw PowerView for real time capacity monitoring and easy operation. User interface is network manageable. High Head Pressure Protection modulates fans to prevent unit from shutting down when condenser airflow is restricted or very high temperature. Coil Freeze Protection hot gas bypass prevents evaporator coil from freezing during light load conditions. Remote probe guarantees inlet temperature to IT equipment. Variable speed, hotswappable fans reduce energy consumption during off-peak hours and allow system to remain operational if a replacement is required. Condensate management factory installed pump removes water from the unit, ensuring continuous operation. Casters allow for easy movement
Performance Specifications Net Cooling Capacity Return Air Temperature SKU Total Capacity kw (BTU/hr) Sensible Capacity 0ºF DB, 8.ºF WB (.ºC DB,.ºC WB) ºF DB, 0.0ºF WB (.ºC DB,.ºC WB) ºF DB,.0ºF WB (.9ºC DB,.ºC WB) 80ºF DB,.0ºF WB (.ºC DB, 9.ºC WB) 80ºF DB,.0ºF WB (.ºC DB, 9.ºC WB) ACSC00. (00). (00) ACSC0. (00).0 (00) ACSC00.98 (000). (00) ACSC0. (00). (00) ACSC00.89 (00). (00) ACSC0. (00). (900) ACSC00. (800). (00) ACSC0. (8000).8 (000) ACSC00.0 (00).0 (00) ACSC0.89 (00).89 (00) ACSC00. (8000). (8000) ACSC0.89 (00).89 (00) 9ºF DB, 8.ºF WB (.0ºC DB, 8.ºC WB) ACSC00. (000).0 (00) ACSC0. (00).0 (00) 9ºF DB, 8.0ºF WB (.ºC DB, 0.0ºC WB) ACSC00.0 (00).0 (00) ACSC0.80 (9800).80 (9800) Note: All values are accurate to +/- % and based on full fan speed with standard filters and 9F (C) Condenser entering air. Net cooling data is published above All tests were performed at 00% evaporator fan speed except as noted Airflow reduced to 000 CFM (00 m/hr) at this condition to maintain appropriate suction temperature Airflow reduced to 00 CFM (00 m/hr) at this condition to maintain appropriate suction temperature Airflow reduced to 80 CFM (0 m/hr) to maintain appropriate suction temperature. Represents conditions with front and rear containment Note: Minimum recommended heat load is kw per InRow SC unit, depending on room conditions
InRow RD 00mm Air, water, and glycol cooled row-based cooling for closets, server rooms, and data centers. Up to0kw Variable speed, hotswappable fans reduce energy consumption during off-peak hours and allow system to remain operational if a replacement is required. Rear retractable electronics module allows for easy service access. Intelligent control offer network manageability, real time capacity monitoring, predictive failure notification, and rack inlet temperature control. Top or bottom piping connections Remote probe guarantees inlet temperature to IT equipment. Capacity Regulation prevents compressor cycling through the use of hot gas bypass Scroll compressor 8 8 Condensate management factory installed dual pumps remove water from the unit, ensuring continuous operation. 9 9 Casters allow for easy movement
Performance Specifications Net Cooling Capacity (Air and Glycol Cooled) Return Air Temperature SKU Total Capacity Sensible Capacity ºF DB, 0ºF WB (.ºC DB,.ºC WB) ºF DB,.ºF WB (.9ºC DB,.ºC WB) 80ºF DB,.0ºF WB (.ºC DB, 9.ºC WB) 8ºF DB,.ºF WB (9.ºC DB, 8.ºC WB) ACRD00/00 8. (8000) 8.0 (00) ACRD0/0 8.0 (00). (00) ACRD00/00 8. (9000) 8. (9000) ACRD0/0 8. (900) 8. (900) ACRD00/00 0.0 (000) 9. (000) ACRD0/0 9. (00) 8.8 (000) ACRD00/00 9.90 (800) 9.90 (800) ACRD0/0 9.9 (00) 9.9 (00) 90ºF DB,.ºF WB (.ºC DB, 9.0ºC WB) ACRD00/00 0. (00) 0. (00) ACRD0/0 0.9 (00) 0.9 (00) 9ºF DB,.8ºF WB (.0ºC DB, 9.9ºC WB) ACRD00/00 0. (00) 0. (00) ACRD0/0 0. (900) 0. (900) 00ºF DB, 9.ºF WB (.8ºC DB, 0.ºC ACRD00/00 0. (00) 0. (00) WB) ACRD0/0 0. (900) 0. (900) 0ºF DB, 0.8ºF WB (0.ºC DB,.ºC ACRD00/00 0. (000) 0. (000) WB) ACRD0/0 0. (,900) 0. (,900) 0ºF DB, ºF WB (.ºC DB,.ºC WB) ACRD00/00 0. (000) 0. (000) ACRD0/0 0. (900) 0. (900) Airflow is 08 l/s (90 SCFM) at full evaporating fan speed Airflow is reduced to 88 l/s (880 SCFM) at this condition to maintain adequate evaporating temperature Airflow is reduced to l/s (0 SCFM) at this condition to maintain adequate evaporating temperature Airflow is reduced to 99 l/s (0 SCFM) at this condition to maintain adequate evaporating temperature Airflow is reduced to 0 l/s (080 SCFM) at this condition to maintain adequate evaporating temperature Airflow is reduced to 8 l/s (90 SCFM) at this condition to maintain adequate evaporating temperature Note: Minimum recommended heat load is kw (,8 BTU) Note: For ACRD00 series the outdoor air temperature is C (9 F) Note: For ACRD00 series, a 0% at 0. l/s (0gpm), the entering glycol mixture temperature is 0. C (0 F)
Performance Specifications Net Cooling Capacity (Water Cooled) Return Air Temperature SKU Total Capacity Sensible Capacity ºF DB, 0ºF WB (.ºC DB,.ºC WB) ºF DB,.ºF WB (.9ºC DB,.ºC WB) 80ºF DB, ºF WB (.ºC DB, 9.ºC WB) 80ºF DB,.8ºF WB (.ºC DB,.ºC WB) 8ºF DB,.ºF WB (9.ºC DB, 8.ºC WB) ACRD00 9. (00) 8.9 (000) ACRD0 9. (00) 8.9 (000) ACRD00 8. (00) 8. (00) ACRD0 9.0 (800) 9.0 (800) ACRD00. (900) 9.90 (800) ACRD0. (9800) 9.99 (00) ACRD00 0.8 (00) 0.8 (00) ACRD0 0. (00) 0. (00) ACRD00 0.9 (00) 0.9 (00) ACRD0 0.98 (00) 0.98 (00) 90ºF DB,.ºF WB (.ºC DB, 9.0ºC WB) ACRD00. (900). (900) ACRD0. (000). (000) 9ºF DB,.8ºF WB (.0ºC DB, 9.9ºC WB) ACRD00.98 (0900).98 (0900) ACRD0.00 (000).00 (000) 00ºF DB, 9.ºF WB (.8ºC DB, 0.ºC WB) ACRD00.0 (0).0 (0) ACRD0.00 (000).00 (000) 0ºF DB, 0.8ºF WB (0.ºC DB,.ºC WB) ACRD00.0 (0).0 (0) ACRD0.00 (000).00 (000) 0ºF DB, ºF WB (.ºC DB,.ºC WB) ACRD00.0 (00).0 (00) ACRD0.0 (00).0 (00) Airflow is 08 l/s (90 SCFM) at full evaporating fan speed Airflow is reduced to 88 l/s (880 SCFM) at this condition to maintain adequate evaporating temperature Airflow is reduced to l/s (0 SCFM) at this condition to maintain adequate evaporating temperature Airflow is reduced to 99 l/s (0 SCFM) at this condition to maintain adequate evaporating temperature Airflow is reduced to 0 l/s (080 SCFM) at this condition to maintain adequate evaporating temperature Airflow is reduced to 8 l/s (90 SCFM) at this condition to maintain adequate evaporating temperature Note: Minimum recommended heat load is kw (,8 BTU) Note: A 0. l/s (0gpm) entering water temperature is 9. C (8 F)
InRow RD 00mm Air cooled, row-based cooling for small to medium data centers. Up to kw Variable speed fans reduce energy consumption during off-peak hours Intelligent control offer network manageability, real time capacity monitoring, predictive failure notification, and rack inlet temperature control. Electric reheat controls temperature during dehumidification (RD0xP only) Top or bottom piping connections Remote probe guarantees inlet temperature to IT equipment. Humidifier maintains moisture level (RD0xP only) Variable speed scroll compressor using VFD control 8 8 Condensate management factory installed pump removes water from the unit, ensuring continuous operation. 9 9 Casters allow for easy movement
Performance Specifications Net Cooling Capacity Return Air Temperature SKU Total Capacity kw (BTU/hr) Sensible Capacity kw (BTU/hr) ºF DB, 0.0ºF WB (.ºC DB,.ºC WB) ºF DB,.ºF WB (.9ºC DB,.ºC WB) 80ºF DB,.8ºF WB (.ºC DB,.ºC WB) 8ºF DB,.ºF WB (9.ºC DB, 8.ºC WB) 90ºF DB,.ºF WB (.ºC DB, 9.0ºC WB) 9ºF DB,.8ºF WB (.0ºC DB, 9.9ºC WB) 00ºF DB, 9.ºF WB (.8ºC DB, 0.ºC WB) ACRD0x.9 (9000).0 (000) ACRD0xP.9 (9000).0 (000) ACRD0x.8 (9000).0 (9000) ACRD0xP.8 (9000).0 (9000) ACRD0x 8.9 (99000). (9000) ACRD0xP 8.9 (99000). (9000) ACRD0x 0. (0000) 9. (0000) ACRD0xP 0. (0000) 9. (0000) ACRD0x.0 (09000).0 (09000) ACRD0xP.0 (09000).0 (09000) ACRD0x.0 (000).0 (000) ACRD0xP.0 (000).0 (000) ACRD0x.9 (000).9 (000) ACRD0xP.9 (000).9 (000) 0ºF DB, 0.8ºF WB (0.ºC DB,.ºC WB) ACRD0x. (000). (000) ACRD0xP. (000). (000), ACRD0x.9 (000).9 (000) 0ºF DB, 0.8ºF WB (0.ºC DB,.ºC WB) ACRD0xP.9 (000).9 (000) Airflow for the ACRD00 series is 900 l/s (000 SCFM) at full evaporating fan speed Note: Minimum recommended heat load is 8kW (00 BTU/hr) Note: For ACRD00 series the outdoor air temperature is C (9 F) Airflow reduced to 00 SCFM at this condition to maintain adequate return gas temperature Compressor speed at 8Hz, all other conditions rated at Hz