Technical Specifications PSH - SERIES Hydronic Heating / Electric Cooling Self contained, high efficiency thru-the-wall heating & cooling unit Heating - 2000-63000 Btuh Cooling - 2800 Btuh, 6500 Btuh, 9500 Btuh, 24400 Btuh CONFORMS TO ANSI/UL STD. 995, CERTIFIED TO CAN/CSA STD. C22.2 NO. 236 AND ANSI/AHRI STD. 390 FEATURES INLET OUTLET COMPATIBLE BOX SIZE Industry standard footprint for retrofit applications Appliance shell dimensions: 43-/8" High x 28" Wide x 32 Deep Wall Sleeve dimensions where penetrating exterior wall: 44-7/8" High x 28-7/8" Wide Standard TAUPE color Custom color options are available FEATURES HEATING MODULE Up to 0.8 EER Up to 24400 Btuh Cooling Easily removable R-40A Air conditioning module Micro-Channel Condenser and Evaporator Coils High efficiency Copeland scroll compressor Pre-wired and pre-charged Up to 63000 Btuh Heating Easily removable hydronic heating modules containing 3 row or 4 row hot water coil 24VAC color coded din rail mounted terminals for easy thermostat wire connections 24VAC output signal for activating field installed water circulating pump or isolation valve Factory installed freeze protection to prevent water coil from freezing during non-use. Activates water circulation at 40 F and deactivates at 60 F. Plug-and-play installation and service CIRCULATION BLOWER Dual Inlet Blower for higher flow rates / reduced air noise Endura Pro Multi-Speed Electronically Commutated Motor for increased electrical efficiency SERVICE ADVANTAGES MODULE Indoor access to all parts & maintenance needs Innovative, dual slide-out chassis can be partially or fully removed for efficient servicing. Hot water coils are equipped with manual drain and vent valves for flushing water and releasing of trapped air during installation or servicing. Extended water inlet & outlet copper tube connections (3/4 water pipe) for easy installation. With spare modules, building management can perform quick swap outs, maintaining indoor conditions in the apartment/condo, while troubleshooting non functioning units off line. All control harnesses are separated with modular quick disconnects so module swap outs do not require time consuming rewiring. Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada phone 866-820-8686 fax 705-725-50 w w w. n a p o l e o n h e a t i n g a n d c o o l i n g. c o m W45-499 / A / 02.05.6
2 NOMENCLATURE P S BRAND MODEL C HEAT TYPE 040 HEAT CAPACITY TYPE 08 CAPACITY A REVISION A, B, C P=Condo Pack S=Single Packaged Vertical C - Gas Condensing S - Gas Standard E - Electrical H - Hydronic D - Duct only (No heat) G a s C o n d e n s i n g Gas Standard(80%) Heat designation Heat designation 000 - No Heat 000 - Duct Only 05-5 000 Btu/h 026-26 000 Btu/h 030-30 000 Btu/h 038-38 000 Btu/h 040-40 000 Btu/h 05-5 000 Btu/h 050-50 000 Btu/h 064-64 000 Btu/h E l e c t r i c H eat Heat designation 000 - Duct Only 005-5.0 kw 007-7.5 kw 00-0 kw 05-5 kw A H yd ro n i c H e at Heat designation 000 - Duct Only 030-30 000 Btu/h 042-42 000 Btu/h Air Conditioning 000 - No Cooling 02-2 800 Btu/h /.0 Ton 08-6 500 Btu/h /.5 Ton 024-9 500 Btu/h / 2.0 Ton 030-24 400 Btu/h / 2.5 Ton A - Air Conditioning Standard Efficiency C - Air Conditioning High Efficiency H - Heat Pump Standard Efficiency P - Heat Pump High Efficiency F - Blower Only (No Cool) i.e. PSC040F000A Example: PSC040A08A - Condo Pack - Single Packaged Vertical - Condensing Gas heating 40k Btu/h - AC.5 ton - Rev A Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada phone 866-820-8686 fax 705-725-50 w w w. n a p o l e o n h e a t i n g a n d c o o l i n g. c o m W45-499 / A / 02.05.6
0.7 5. 20.7 20.3 3.5 0.7 5. 20.7 20.3 3.5 PSH030A02A PSH030A08A PSH030A024A PSH030A030A PSH030F000A PSH042A02A PSH042A08A PSH042A024A PSH042A030A PSH042F000A PSH030A02A-TP PSH030A08A-TP PSH030A024A-TP PSH030A030A-TP PSH042A02A-TP PSH042A08A-TP PSH042A024A-TP PSH042A030A-TP TABLE 2. 2800 6500 9500 24400 2800 6500 9500 24400 Btuh 0.8 9.6 9.0 9.0 0.8 9.6 9.0 9.0 EER 450 740 740 960 450 740 740 960 CFM 5 20 30 30 5 5 20 30 30 5 Max. Overcurrent protection device (A) GENERAL PERFORMANCE DATA Minimum Circuit Ampacity (A) 26 48 58.3 64 26 48 58.3 64 Comp Locked Rotor Amps (LRA) 30000 42000 208V/230V Btu/Hr HEATING 5.5 9 3.5 2.8 5.5 9 3.5 2.8 Comp. Rated Load Amps (RLA) 075 Nominal RPM.5.5 Rated Load Amps /6 /6 /6 /4 /6 /6 /6 /4 Cond. Motor HP Rated Load Amps Wheel Dia x Width (in x in) INDOOR BLOWER 0 x 6 OUTSIDE FAN MOTOR 2.8 COMPRESSOR HP /3 Electric and Physical Data Voltage/Hz/Phase 208-230/60/ TABLE. Voltage Range 97-253 ELECTRICAL AND PHYSICAL DATA 3 SPECIFICATIONS Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada phone 866-820-8686 fax 705-725-50 w w w. n a p o l e o n h e a t i n g a n d c o o l i n g. c o m W45-499 / A / 02.05.6
4 HEATING MODULE PERFORMANCE MATRIX TABLE 3. Coil (FH x FL: 2" X 9") (3 ROW) Air FLOW (CFM) 388 529 744 908 97 Complete performance matrix from hydronic heating module GPM Fluid Pressure Drop (Ft. Water)@ 30F Coil Capacity (Btu/hr) Inlet Water Temperature (F) 20F 30F 40F 50F 60F 0.65 800 4000 6400 8900 2500 2 2.28 400 6800 9600 22400 25200 3 4.77 4900 7800 20700 23700 26500 0.65 3600 600 8700 2700 24600 2 2.28 6900 2000 23500 27000 30400 3 4.77 8200 2700 25300 29000 32600 0.65 5600 8500 2400 24700 2800 2 2.28 20500 24300 28400 32700 36900 3 4.77 22600 26800 3400 36000 40500 0.65 6600 9700 22800 26200 29800 2 2.28 22600 26700 3200 35900 40600 3 4.77 25200 29800 34900 4000 45200 0.65 6900 2000 23300 26700 30400 2 2.28 23300 27600 3200 37000 4900 3 4.77 26000 30900 36200 4500 46800 (4 ROW) 388 529 744 908 97 0.88 4000 6600 9300 22200 2500 2 3.02 6700 9800 23200 26500 29800 3 6.26 7600 2000 24400 27900 3400 0.88 600 900 2200 25400 28800 2 3.02 20400 24200 28200 32300 36400 3 6.26 2900 2600 30400 34800 3900 0.88 8300 2700 25200 28600 32600 2 3.02 24800 29400 34200 39300 44400 3 6.26 27500 32600 38000 43600 49000 2 3.02 27300 32400 37500 4300 48800 3 6.26 30800 36500 42600 48800 5500 4 0.52 32700 38800 45300 5900 58400 5 5.7 33900 40300 4700 53900 60500 3 6.26 3900 37800 4400 50600 5700 4 0.52 34000 40300 47200 54000 60800 5 5.7 35400 4200 4900 56200 6300 *All specifications and designs can change without notice to allow for on-going improvements. Images may not be exactly as shown. Consult with your owner s manual for current information. Check all local and national building codes and gas regulations. Napoleon is a registered trade mark of Wolf Steel Ltd. Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada phone 866-820-8686 fax 705-725-50 www. napoleonheatingandcooling. com W45-499 / A / 02.05.6
5 AIR FLOW TABLE 4. CFM at External Static Pressure (Inches of Water Column) for -3ROW COIL Speed Motor Tap# Speed 0. 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9.0 00% 999 967 939 909 875 833 780 682 595 544 2 85% 933 95 890 866 823 78 79 662 588 544 3 60% 779 755 734 707 673 643 609 578 537 484 4 35% 577 556 5 52 466 389 348 33 289 254 5 25% 472 42 388 340 292 25 229 99 TABLE 5. CFM at External Static Pressure (Inches of Water Column) for -4ROW COIL Speed Motor Tap# Speed 0. 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9.0 00% 980 943 98 883 852 800 750 633 578 495 2 85% 98 894 866 837 792 745 684 622 565 462 3 60% 768 737 76 684 656 622 582 555 55 46 4 35% 563 539 492 443 43 375 332 296 276 245 5 25% 458 404 37 322 276 234 28 98 TABLE 6. PSH030A02A PSH030A08A PSH030A024A PSH030A030A Available Motor Speed Taps Heating/Cooling Speed Heating/Cooling Speed Setting Setting Module Tap# Module Tap# HI HI CACM02A FACTORY 5 PSH042A02A FACTORY 5 CACM02A HI 4 HI 4 G - continuous fan 3 G - continuous fan 3 HI HI CACM08A FACTORY 3 PSH042A08A FACTORY 3 CACM08A HI 2* HI 2* G - continuous fan 5 G - continuous fan 5 HI HI CACM024A FACTORY 3 PSH042A024A FACTORY 3 CACM024A HI 2* HI 2* G - continuous fan 5 G - continuous fan 5 HI * HI * CACM030A FACTORY PSH042A030A FACTORY CACM030A HI HI G - continuous fan 5 G - continuous fan 5 *IMPORTANT: Do not use common motor speed tap for multiple functions; Connecting (any combination of) air conditioning blower speed, heating blower speed, and continuous fan speed to the same motor speed tap will cause the unit to malfunction. Each of the three blower functions must be connected to separate motor speed taps. Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada phone 866-820-8686 fax 705-725-50 www. napoleonheatingandcooling. com W45-499 / A / 02.05.6
6 DIMENSIONS WALL SLEEVE DIMENSIONS TO IMPROVE RIGIDITY AND REDUCTION IN VIBRATION WALL MOUNTING, BRACKETS CAN BE USED TO AFFIX WALL SLEEVE TO BUILDING SUB STRUCTURE FROM INSIDE OR OUTSIDE BUILDING. ENGINEER/ ARCHITECT TO CONSULT WITH POLEON ENGINEERING TO DETERMINE BRACKET LOCATION FOR SETTING THE DESIRED DEPTH OF WALL SLEEVE INTO WALL. WALL SLEEVE IS DIRECTLY LAGGED TO WALL SUBSTRUCTURE. 6" 6" 3 34" 7 28 8 " POSITION A " POSITION B 42 4 " 7 46 8 " 7 44 8 " 26 2 " 5 6 " 9 2 6 " 3 32 4 " Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada phone 866-820-8686 fax 705-725-50 w w w. n a p o l e o n h e a t i n g a n d c o o l i n g. c o m W45-499 / A / 02.05.6
7 ENCLOSURE FOR CONDO PACK 0" MIN. CLEARANCE * 2" MIN. CLEARANCE 0" MIN. CLEARANCE 36" " REF. CLEARANCE BETWEEN LEFT (HINGE) SIDE DOOR JAM AND CONDO PACK 29" REF. DOOR OPENING " REF..5" Ø (0" RECOMMENDED MIN. CLEARANCE FOR SERVICING) * If less then 0, servicing may be performed by opening the front door panels and the heating module may need to be removed to access components. Space required for Return Air Ducting must be considered. DRAIN REQUIRED (.5" Ø MIN.) FOR REMOVAL OF HEATING MODULE WATER DRAIN AND AC CONDENSATE Flashing Seal around Sleeve and INSIDE wall NOTE ** Engineer/Architect - to consult with Napoleon Engineering to determine bracket location for setting the desired depth of Wall Sleeve into wall. A A-A Flashing 2" MIN. CLEARANCE TO COMBUSTIBLE 32 /8" REF. * **SECURE TO WALL 82" REF. 45 /2" 45 3/8" 43 /8" 44 7/8" REF. FLOOR 8" MIN. FABRICATED WOOD OR STEEL SUPPORT A DRAIN 6 " 2 9/6" Brick Wall PROTRUDE /2 MIN.- MAX. Seal around Sleeve and OUTSIDE wall PROTRUDE /2 MIN.- MAX. Brick Wall ROUGH OPENING TO SUIT 28 7/8" X 44 7/8" WALL SLEEVE 28 7/8" 44 7/8" REF. VIEW OF OUTSIDE WALL Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada phone 866-820-8686 fax 705-725-50 www. napoleonheatingandcooling. com W45-499 / A / 02.05.6
CONDO PACK SHOWN IN WALL SLEEVE FLOOR 43 5 6 " 6" 20 2 " 5 3 8 " 24 28 4 " 4 " 3 8 " 8" AIR SUPPLY OUTLET 3 2 " 28" 29" ELECTRICAL CONNECTION WATER CONNECTIONS 3/4 WATER PIPES (7/8 OD) 45 2 " 8 " 45 3 8 " AC DRAIN 6 " 5 6 " 24 8 " 5 6 " 7 8 " AIR RETURN INLET 28 7 8 " WALL SLEEVE WATER INLET (SUPPLY) WATER OUTLET (RETURN) HEATING MODULE MODULE (AIR CONDITIONER) 2 9 6 " 25 6 " 32 8 " 24 Napoleon Road, Barrie, Ontario, Canada L4M 0G8 8" MIN PHONE: 866-820-8686 FAX: 705-725-50 Website: www.napoleonheatingandcooling.com General: hvac@napoleonproducts.com Technical inquiries: hvacsupport@napoleonproducts.com Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada phone 866-820-8686 fax 705-725-50 www. napoleonheatingandcooling. com W45-499 / A / 02.05.6