ISO NORMAS PUBLICADAS ISO/JTC - Information technology ISO/IEC 20008-1:2013 - Information technology -- Security techniques -- Anonymous digital signatures -- Part 1: General ISO/IEC 14496-3:2009/Amd 4:2013 - New levels for AAC profiles ISO/IEC 14496-16:2011/Amd 2:2014 - Multi-resolution 3D mesh compression ISO/IEC 14443-4:2008/Amd 4:2014 - Frame with error correction ISO/IEC 23005-1:2014 - Information technology -- Media context and control -- Part 1: Architecture ISO/IEC 14496-1:2010/Amd 2:2014 - Support for raw audio-visual data ISO/IEC 23005-7:2014 - Information technology -- Media context and control -- Part 7: Conformance and reference software ISO/IEC 14496-12:2012/Amd 2:2014 - Carriage of timed text and other visual overlays ISO/IEC 15444-12:2012/Amd 2:2014 - Carriage of timed text and other visual overlays ISO/IEC 27000:2014 - Information technology -- Security techniques -- Information security management systems -- Overview and vocabulary ISO/TC 6 - Paper, board and pulps ISO 23714:2014 - Pulps -- Determination of water retention value (WRV) ISO 16065-2:2014 - Pulps -- Determination of fibre length by automated optical analysis -- Part 2: Unpolarized light method ISO 535:2014 - Paper and board -- Determination of water absorptiveness -- Cobb method ISO/TC 8 - Ships and marine technology ISO 16855:2013 - Ships and marine technology -- Loose gear of lifting appliances on ships -- General requirements ISO 16856:2013 - Ships and marine technology -- Loose gear of lifting appliances on ships -- Hooks ISO 16857:2013 - Ships and marine technology -- Loose gear of lifting appliances on ships -- Shackles
ISO 16858:2013 - Ships and marine technology -- Loose gear of lifting appliances on ships -- Pulleys ISO 24409-3:2014 - Ships and marine technology -- Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings -- Part 3: Code of practice ISO 24409-2:2014 - Ships and marine technology -- Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings -- Part 2: Catalogue ISO 17357-1:2014 - Ships and marine technology -- Floating pneumatic rubber fenders -- Part 1: High pressure ISO 17357-2:2014 - Ships and marine technology -- Floating pneumatic rubber fenders -- Part 2: Low pressure ISO 17683:2014 - Ships and marine technology -- Ceramic weld backing for marine use ISO/TC 21 - Equipment for fire protection and fire fighting ISO 6182-1:2014 - Fire protection -- Automatic sprinkler systems -- Part 1: Requirements and test methods for sprinklers ISO/TC 22 - Road vehicles ISO 8856:2014 - Road vehicles -- Electrical performance of starter motors -- Test methods and general requirements ISO 21308-5:2014 - Road vehicles -- Product data exchange between chassis and body work manufacturers (BEP) -- Part 5: Coding of loader crane bodywork ISO/TC 23 - Tractors and machinery for agriculture and forestry ISO 5718:2013 - Harvesting equipment -- Blades for agricultural rotary mowers -- Requirements ISO/TC 29 - Small tools ISO 9448-1:2013 - Tools for pressing -- Guide bushes -- Part 1: Forms ISO 9448-4:2013 - Tools for pressing -- Guide bushes -- Part 4: Form C, gliding bushes, headed, type 1 ISO 9448-2:2013 - Tools for pressing -- Guide bushes -- Part 2: Form A, gliding bushes, plain, type 1
ISO 9448-5:2013 - Tools for pressing -- Guide bushes -- Part 5: Form D, ball cage bushes, headed, type 1 ISO 9448-6:2013 - Tools for pressing -- Guide bushes -- Part 6: Form E, gliding bushes, flanged, type 1 ISO 9448-7:2013 - Tools for pressing -- Guide bushes -- Part 7: Form F, ball cage bushes, flanged, type 1 ISO 9448-8:2013 - Tools for pressing -- Guide bushes -- Part 8: Form G, gliding bushes, stepped, type 1 ISO 9448-9:2013 - Tools for pressing -- Guide bushes -- Part 9: Form B, ball cage bushes, plain, type 2 ISO/TC 31 - Tyres, rims and valves ISO 4000-2:2013 - Passenger car tyres and rims -- Part 2: Rims ISO/TC 35 - Paints and varnishes ISO 16927:2014 - Paints and varnishes -- Determination of the overcoatability and recoatability of a coating ISO/TC 38 - Textiles ISO 13934-2:2014 - Textiles -- Tensile properties of fabrics -- Part 2: Determination of maximum force using the grab method ISO 24362-1:2014 - Textiles -- Methods for determination of certain aromatic amines derived from azo colorants -- Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres ISO 24362-3:2014 - Textiles -- Methods for determination of certain aromatic amines derived from azo colorants -- Part 3: Detection of the use of certain azo colorants, which may release 4- aminoazobenzene ISO/TC 41 - Pulleys and belts (including veebelts) ISO 17396:2014 - Synchronous belt drives -- Metric pitch, trapezoidal profile systems T and AT, belts and pulleys ISO/TC 42 - Photography
ISO 18937:2014 - Imaging materials -- Photographic reflection prints -- Methods for measuring indoor light stability ISO/TC 43 - Acoustics ISO 1680:2013 - Acoustics -- Test code for the measurement of airborne noise emitted by rotating electrical machines ISO/TC 44 - Welding and allied processes ISO 14554-2:2013 - Quality requirements for welding -- Resistance welding of metallic materials - - Part 2: Elementary quality requirements ISO 14554-1:2013 - Quality requirements for welding -- Resistance welding of metallic materials - - Part 1: Comprehensive quality requirements ISO/TC 45 - Rubber and rubber products ISO 976:2013 - Rubber and plastics -- Polymer dispersions and rubber latices -- Determination of ph ISO 17257:2013 - Rubber -- Identification of polymers -- Pyrolytic gas-chromatographic method using mass-spectrometric detection ISO 10282:2014 - Single-use sterile rubber surgical gloves -- Specification ISO/TC 46 - Information and documentation ISO 25577:2013 - Information and documentation -- MarcXchange ISO/TC 54 - Essential oils ISO 9235:2013 - Aromatic natural raw materials -- Vocabulary ISO/TC 58 - Gas cylinders ISO 10462:2013 - Gas cylinders -- Acetylene cylinders -- Periodic inspection and maintenance ISO/TC 59 - Buildings and civil engineering works ISO 15686-4:2014 - Building Construction -- Service Life Planning -- Part 4: Service Life Planning using Building Information Modelling
ISO/TC 61 - Plastics ISO 11358-3:2013 - Plastics -- Thermogravimetry (TG) of polymers -- Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics ISO 11359-1:2014 - Plastics -- Thermomechanical analysis (TMA) -- Part 1: General principles ISO 15791-1:2014 - Plastics -- Development and use of intermediate-scale fire tests for plastics products -- Part 1: General guidance ISO 29221:2014 - Plastics -- Determination of mode I plane-strain crack-arrest toughness ISO/TC 67 - Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries ISO 19900:2013 - Petroleum and natural gas industries -- General requirements for offshore structures ISO 13847:2013 - Petroleum and natural gas industries -- Pipeline transportation systems -- Welding of pipelines ISO 11960:2014 - Petroleum and natural gas industries -- Steel pipes for use as casing or tubing for wells ISO/TC 69 - Applications of statistical methods ISO 7870-5:2014 - Control charts -- Part 5: Specialized control charts ISO 7870-1:2014 - Control charts -- Part 1: General guidelines ISO 16269-6:2014 - Statistical interpretation of data -- Part 6: Determination of statistical tolerance intervals ISO/TC 85 - Nuclear energy, nuclear technologies, and radiological protection ISO 16966:2013 - Nuclear energy -- Nuclear fuel technology -- Theoretical activation calculation method to evaluate the radioactivity of activated waste generated at nuclear reactors ISO 8300:2013 - Nuclear fuel technology -- Determination of plutonium content in plutonium dioxide of nuclear grade quality -- Gravimetric method ISO 3925:2014 - Unsealed radioactive substances -- Identification and documentation ISO 19238:2014 - Radiological protection -- Performance criteria for service laboratories performing biological dosimetry by cytogenetics
ISO/TC 89 - Wood-based panels ISO 1096:2014 - Plywood Classification ISO/TC 96 - Cranes ISO 7752-3:2013 - Cranes -- Control layout and characteristics -- Part 3: Tower cranes ISO/TC 98 - Bases for design of structures ISO 4355:2013 - Bases for design of structures -- Determination of snow loads on roofs ISO/TC 113 - Hydrometry ISO 18365:2013 - Hydrometry -- Selection, establishment and operation of a gauging station ISO/TC 121 - Anaesthetic and respiratory equipment ISO 27427:2013 - Anaesthetic and respiratory equipment -- Nebulizing systems and components ISO/TC 123 - Plain bearings ISO 2795:2014 - Plain bearings -- Sintered bushes -- Dimensions and tolerances ISO/TC 131 - Fluid power systems ISO 3320:2013 - Fluid power systems and components -- Cylinder bores and piston rod diameters and area ratios -- Metric series ISO/TC 138 - Plastics pipes, fittings and valves for the transport of fluids ISO 4437-2:2014 - Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) -- Part 2: Pipes ISO 4437-5:2014 - Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) -- Part 5: Fitness for purpose of the system ISO 4437-1:2014 - Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) -- Part 1: General ISO 4437-3:2014 - Plastics piping systems for the supply of gaseous fuels -- Polyethylene (PE) -- Part 3: Fittings
ISO/TC 145 - Graphical symbols ISO 7000:2014 - Graphical symbols for use on equipment -- Registered symbols ISO/TC 147 - Water quality ISO 16665:2014 - Water quality -- Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna ISO/TC 157 - Non-systemic contraceptives and STI barrier prophylactics ISO 25841:2014 - Female condoms -- Requirements and test methods ISO/TC 172 - Optics and photonics ISO 9022-23:2013 - Optics and photonics -- Environmental test methods -- Part 23: Low pressure combined with cold, ambient temperature and dry and damp heat ISO/TC 173 - Assistive products for persons with disability ISO 16840-3:2014 - Wheelchair seating -- Part 3: Determination of static, impact and repetitive load strengths for postural support devices ISO/TC 184 - Automation systems and integration ISO 22400-2:2014 - Automation systems and integration -- Key performance indicators (KPIs) for manufacturing operations management -- Part 2: Definitions and descriptions ISO/TC 190 - Soil quality ISO 16387:2014 - Soil quality -- Effects of contaminants on Enchytraeidae (Enchytraeus sp.) -- Determination of effects on reproduction ISO/TC 201 - Surface chemical analysis ISO 17862:2013 - Surface chemical analysis -- Secondary ion mass spectrometry -- Linearity of intensity scale in single ion counting time-of-flight mass analysers ISO/TC 202 - Microbeam analysis ISO 17470:2014 - Microbeam analysis -- Electron probe microanalysis -- Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
ISO/TC 206 - Fine ceramics ISO 17172:2014 - Fine ceramics (advanced ceramics, advanced technical ceramics) -- Determination of compaction properties of ceramic powders ISO/TC 211 - Geographic information/geomatics ISO 19157:2013 - Geographic information -- Data quality ISO/TC 213 - Dimensional and geometrical product specifications and verification ISO 25178-605:2014 - Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments ISO/TC 215 - Health informatics ISO 22857:2013 - Health informatics -- Guidelines on data protection to facilitate trans-border flows of personal health data ISO 20301:2014 - Health informatics -- Health cards -- General characteristics ISO 18104:2014 - Health informatics -- Categorial structures for representation of nursing diagnoses and nursing actions in terminological systems ISO/TC 251 - Asset management ISO 55001:2014 - Asset management -- Management systems -- Requirements ISO 55000:2014 - Asset management -- Overview, principles and terminology ISO 55002:2014 - Asset management -- Management systems -- Guidelines for the application of ISO 55001