Oakdale Primary School Expansion Project Appendix A - MEP Schedule of Works HBS-SH-MEP-801 May 2017 For Peterborough City Council ver. author date checked comment P1 KA 19-05-17 TC TENDER ISSUE 1
1. Mechanical Services Schedule of Works (Tender Return) Phase 1 1.01 Preliminaries including design 1.02 Liaise with utility companies and isolate/strip-out existing water and gas supplies to existing Nursery Building to be demolished 1.03 External trench from boiler room to Block N with pre-insulated heating flow/return pipework and mains water supply pipework Design/ Supply/ Install 1.04 Strip-out existing boiler plant 1.05 New boiler plant installation including boilers, flues, pressurisation unit, pumps, hot water cylinder, control panel, pipework and fittings, thermal insulation, control wiring etc. Design/ Supply/ Install 1.06 Heating services including pipework, radiators, insulation, valves, drain cocks, brackets and thermal insulation. Design/ Supply/ Install 1.07 Hot and cold water services including water heaters, pipework, insulation, valves, drain cocks, brackets and thermal insulation. Design/ Supply/ Install 1.08 Above ground drainage Design/ Supply/ Install 1.09 Mechanical ventilation system (extract fans) to cleaner store and server room, including fan units, ductwork etc. Design/ Supply/ Install 1.10 Mechanical ventilation (heat recovery ventilation unit) to pupil toilets, including unit, wiring, control system and commissioning by manufacturer. - Design/ Supply/ Install 1.11 Classroom natural ventilation; attenuated louvres with motorised dampers including controls - Design/ Supply/ Install 1.12 Classroom natural ventilation; window motors including controls - Design/ Supply/ Install 1.13 Test and commissioning of all mechanical and public health services including automatic controls 1.14 Chlorination of hot and cold water services installation 1.15 Water treatment to new and existing heating system 1.16 Provision of O&M Maintenance manuals and record drawings. 1.17 Provision of Installation Drawings 2
1.18 Provision of Record Drawings 1.19 Provision of as-built Part L BRUKL document and Energy Performance Certificate PHASE 1: MECHANICAL TO BE CARRIED FORWARD TO MAIN TENDER SUMMARY 3
Phase 2 2.01 Preliminaries including design 2.02 Heating services including pipework, radiators, insulation, valves, drain cocks, brackets and thermal insulation. Design/ Supply/ Install 2.03 Hot and cold water services including water heaters, pipework, insulation, valves, drain cocks, brackets and thermal insulation. Design/ Supply/ Install 2.04 Above ground drainage Design/ Supply/ Install 2.05 Mechanical ventilation systems (extract fans) to cleaner stores, showers, toilets including fan units, ductwork etc. Design/ Supply/ Install 2.06 Test and commissioning of all mechanical and public health services including automatic controls 2.07 Chlorination of hot and cold water services installation 2.08 Water treatment to heating system 2.09 Provision of O&M Maintenance manuals and record drawings. 2.10 Provision of Installation Drawings 2.11 Provision of Record Drawings PHASE 2: MECHANICAL TO BE CARRIED FORWARD TO MAIN TENDER SUMMARY 4
Phase 3 3.01 Preliminaries including design 3.02 Heating services including pipework, radiators, insulation, valves, drain cocks, brackets and thermal insulation. Design/ Supply/ Install 3.03 Diversion and lowering of existing incoming gas and water services as required where new car parking surface is formed. Liaise with utility companies as required. 3.04 Hot and cold water services including water heaters, pipework, insulation, valves, drain cocks, brackets and thermal insulation. Design/ Supply/ Install 3.05 Above ground drainage Design/ Supply/ Install 3.06 Mechanical ventilation systems (extract fans) to cleaner stores, showers, toilets including fan units, ductwork etc. Design/ Supply/ Install 3.07 Test and commissioning of all mechanical and public health services including automatic controls 3.08 Chlorination of hot and cold water services installation 3.09 Water treatment to new and existing heating system 3.10 Provision of O&M Maintenance manuals and record drawings. 3.11 Provision of Installation Drawings 3.12 Provision of Record Drawings PHASE 3: MECHANICAL TO BE CARRIED FORWARD TO MAIN TENDER SUMMARY 5
2. Electrical Services Schedule of Works (Tender Return) Enabling phase E.01 Preliminaries including design E.02 Employ the services of Serco to divert existing fibre by City wide fibre into new server locationref: SWB WO0000001902379 Oakdale Primary School City Fibre Move E.03 Design, supply and install all power, lighting requirements into new server room. (currently part of bin store) E.04 Design, supply and install relocated existing data cabinet from ICT suite or provide new 42 u data cabinet and terminate existing data cables into new patch panels (see item 6.11) E.05 Liaise with utility companies and isolate/strip-out existing electricity and telecoms supplies to existing Nursery Building to be demolished E.06 Strip out and remove all electrical services from Nursery prior to demolition as required by demolition contractor. Phase 1 4.01 Preliminaries including design 4.02 Design, Supply and install new MCCB in existing 6 way panel. 4.03 Design, Supply and install new LV Sub mains to new TP&N dist board. route, duct, containment to new dist board. 4.04 Design, Supply and install new MCB Distribution Board in new classroom block, DB-H 4.05 New Primary Containment/ Design / Supply / Install 4.06 Fire Stopping/ Design / Supply / Install 4.07 Secondary Containment / Design / Supply / Install 6
4.08 Small Power/ Design / Supply / Install 4.09 Internal Lighting Circuits and Controls/ Design / Supply / Install 4.10 Internal Lighting / Design / Supply / Install 4.11 Emergency lighting / Design / Supply / Install 4.12 External Lighting Circuits and Controls/ Design / Supply / Install 4.13 External Lighting Supply and Installation on building / Design / Supply / Install 4.14 Earthing and Bonding 4.15 Fire Detection System / Design / Supply / Install / Commission / Include link to existing main panel.(temp) 4.16 Security Alarm System / Design / Supply / Install / Commission/ Include link to existing main panel.(temp) 4.17 Class change bell system linked to school existing / Design / Supply / Install. 4.18 New lightning protection system linked to existing / Design / Supply / Install. 4.19 Mechanical Services Supplies and Containment wire ways for Mech supplies, accessories and cabling, final connection at source, supplied and installed by others / Design / Supply / Install. 4.20 Verification / testing & certification of systems 4.21 Provision of O&M Documentation and Record drawings 4.22 Provision of installation drawings ENABLING PHASE AND PHASE 1: ELECTRICAL TO BE CARRIED FORWARD TO MAIN TENDER SUMMARY 7
Phase 2 5.01 Preliminaries including design 5.02 Strip out existing electrical installation ahead of demolition/refurbishment. 5.03 Design, Supply and install new MCCB in existing 6 way panel. 5.04 Design, Supply and install new LV Sub mains, route, duct / containment to new dist board. 5.05 Design, Supply and install new MCB Distribution Boards, DB-A, DB-B, DB-C including sub metering. 5.06 New Primary Containment/ Design / Supply / Install 5.07 Fire Stopping/ Design / Supply / Install 5.08 Secondary Containment / Design / Supply / Install 5.09 Small Power/ Design / Supply / Install 5.10 Data cabinet in nursery and cat5e data cabling including terminations / Design / Supply / Install (inc patch panels & RJ45 double front plates) 5.11 From main Data cabinet provide data cabling including terminations to all non-nursery areas / Design / Supply / Install (inc patch panels & RJ45 double frontplates) 5.12 Design, Supply and install data fibre link between main school data cabinet and data cabinet in store room of nursery. 5.13 Internal Lighting Circuits and Controls/ Design / Supply / Install 5.14 Internal Lighting / Design / Supply / Install 5.15 Emergency lighting / Design / Supply / Install 5.16 External Lighting Circuits and Controls/ Design / Supply / Install 8
5.17 External Lighting Supply and Installation on building / Design / Supply / Install 5.18 Earthing and Bonding 5.19 Fire Detection System / Design / Supply / Install / Commission / Include link to existing main panel. 5.20 Security Alarm System / Design / Supply / Install / Commission / Include link to existing main panel. 5.21 Class change bell system linked to school existing / Design / Supply / Install. 5.22 Access control system to / Design / Supply / Install / Commission 5.23 Mechanical Services Supplies and Containment wire ways for Mech supplies, accessories and cabling, final connection at source, supplied and installed by others / Design / Supply / Install. 5.24 Telecommunications & Data / Design / Supply / Install / Commission 5.25 New lightning protection system linked to existing / Design / Supply / Install. 5.26 Verification / testing & certification of systems 5.27 Provision of O&M Documentation and Record drawings 5.28 Provision of installation drawings PHASE 2: ELECTRICAL TO BE CARRIED FORWARD TO MAIN TENDER SUMMARY 9
Phase 3 6.01 Preliminaries including design 6.02 Design/and arrange the diversion and lowering of incoming telecoms and electrical services as required where new car parking spaces is formed and were widened apron is formed. Liaise with utility companies as required. 6.03 Strip out existing electrical installation ahead of demolition/refurbishment. 6.04 Design, Supply and install new 8 way MCCB to replace existing located in main intake 6.05 Design, Supply and install new LV Sub mains from new MCCB board to sub boards 6.06 Design, Supply and install new MCB Distribution Boards DB-D,DB-E,DB-F & DB-G 6.07 New Primary Containment/ Design / Supply / Install 6.08 Fire Stopping/ Design / Supply / Install 6.09 Secondary Containment / Design / Supply / Install 6.10 Small Power/ Design / Supply / Install 6.11 Design, supply and install new 42 u data cabinet and terminate existing data cables into new patch panels. (remove existing cabinet) 6.12 From main Data cabinet provide data cabling including terminations / Design / Supply / Install (inc patch panels & RJ45 double frontplates) 6.13 Internal Lighting Circuits and Controls/ Design / Supply / Install 6.14 Internal Lighting / Design / Supply / Install 6.15 Emergency lighting / Design / Supply / Install 10
6.16 External Lighting Circuits and Controls/ Design / Supply / Install 6.17 External Lighting Supply and Installation on building / Design / Supply / Install 6.18 Earthing and Bonding 6.19 Fire Detection System / Design / Supply / Install / Commission / Include new main panel. 6.20 Terminate fire alarm cables from phase 1 & 2 into new fire alarm panel / Design / Supply / Install / 6.21 Security Alarm System & new panel / Design / Supply / Install / Commission 6.22 Terminate intruder alarm cables from phase 1 & 2 into new intruder alarm panel. / Design / Supply / Install / 6.23 Class change bell system linked to school existing / Design / Supply / Install. 6.24 Mechanical Services Supplies and Containment wire ways for Mech supplies, accessories and cabling, final connection at source, supplied and installed by others / Design / Supply / Install. 6.25-op1 Relocation of Telecommunications system & BT lines / into new office meeting room & BT lines / Design / Supply / Install / Commission 6.25-op2 Relocation of Telecommunications system & BT lines / into new server room & BT lines / Design / Supply / Install / Commission 6.26 Verification / testing & certification of systems 6.27 Provision of O&M Documentation and Record drawings 6.28 Provision of installation drawings PHASE 3: ELECTRICAL TO BE CARRIED FORWARD TO MAIN TENDER SUMMARY 11