NORTH AMERICA. Max Max Max Unit. AR F 120V lbs. NOTE or NOTICE: Information that requires special attention.

Similar documents
Specifications: NORTH AMERICA

CF1400 DO NOT RETURN PRODUCT TO PLACE OF PURCHASE. IF YOU HAVE ANY QUESTIONS, CALL OUR TOLL FREE HOTLINE:

2050 PSI. Electric Pressure Washer. ASSEMBLY, CARE AND USE INSTRUCTIONS Model AR 2N1-Q READ CAREFULLY

Owner s Manual. Model AR AR

Model K 240 plus Part No

PRESSURE WASHER. OWNER'S MANUAL Model VPW49HA 120V., 60 Hz., 13 Amps.

Electric High-Pressure Washer - Operator s Manual

ELECTRIC POWERED PRESSURE WASHER

1600 PSI ELECTRIC PRESSURE WASHER

1850 PSI. Electric Pressure Washer. ASSEMBLY, CARE AND USE INSTRUCTIONS Model AR 381 READ CAREFULLY

1650 PSI. Electric Pressure Washer. ASSEMBLY, CARE AND USE INSTRUCTIONS Model AR 144 S READ CAREFULLY

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

Model K 520 M Part No

OWNER'S MANUAL Model VPW46H 120V., 60 Hz., 13 Amps. PRESSURE WASHER. FANTOM 94 Main Mill Street, Door 16 Plattsburgh, NY Tel.

Model K 330 M Part No

Owner s Manual. Model AR383. AR

RX525 Electric Pressure Washer s Original instructions WARNING:

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

Electric Pressure Washer

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

Model K 280 M Part No

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

1500 PSI. Electric Pressure Washer. ASSEMBLY, CARE AND USE INSTRUCTIONS Model AR 1500 READ CAREFULLY

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

Electric Pressure Washer

K 3.97 M. Specifications or visit our website: In USA call: Part No

WARRANTY TABLE OF CONTENTS TECHNICAL SPECIFICATIONS. Product Warranty Always keep your receipt as proof of purchase. Technical specifications...

Electric Pressure Washer

K 2.90 M. Specifications Operating pressure, max PSI Water volume GPM Voltage V Amp draw AMPS

K 2.56 M (06/09)

APW-VAP-150P High Pressure Cleaner Operator Manual

K 2.97 M. Specifications Operating pressure, max PSI Water volume GPM Voltage V Amp draw AMPS

English. Your Model Number is: HD1500 IMPORTANT

Electric Pressure Washer

1300W Pressure Washer RACHP133A

K Specifications. Max. Water Volume

PJ130S High Pressure Cleaner

2400W Pressure Washer RAC-HP125

K Specifications. Max. Water Volume

Model K205 M Plus Part No

Nichole Ernst CEO Powerhouse International

S1700 Electric Pressure Washer

INSTALLATION GUIDE HIGH PRESSURE CLEANER (1800C) If there is any question during using, please feel free to contact us by

1600 PSI Electric Pressure Washer

Instruction Manual. Pressure Washer. Get ready to deep clean! Wards.com Wards.com ITEM:

Topic Page # Assembly Instructions 6-8. Operating Instructions Detergents Clean-up and Storage Cleaning Tips 16.

2000 PSI Electric Pressure Washer

Electric Pressure Washer NOTE: REFER TO PRODUCT MANUAL FOR ALL SAFETY INSTRUCTIONS

K /05

1800 PSI Electric Pressure Washer

1600PSI ELECTRIC PRESSURE WASHER EQUIPO ELÉCTRICO DE LAVADO CON AGUA A PRESIÓN DE 1600 PSI

Electric Pressure Washer NOTE: REFER TO PRODUCT MANUAL FOR ALL SAFETY INSTRUCTIONS

1700 PSI Electric Pressure Washer

Electric Pressure Washer NOTE: REFER TO PRODUCT MANUAL FOR ALL SAFETY INSTRUCTIONS

G 2000 ET. English 2 Español 15 Français 30! /06

Model K 3000 G Part No

EH W Pressure Washer

ELECTRIC PRESSURE WASHER

PRESSURE WASHER MODEL NO: JETSTAR 1750 OPERATION & MAINTENANCE INSTRUCTIONS. WARNING Read the instructions before using the machine PART NO:

ELECTRIC PRESSURE WASHER

K 2.26 M. English 2 Español 17 Français /06

K English 2 Español 17 Français (10/08)

FORCE. Owner's manual

Model HD 3501 Part No High Pressure Washer Operator Manual

APW PSI PRESSURE WASHER

Model K 4400 G Part No High Pressure Washer

Model/Modelo: YF1600A1

Table Of Contents PSI Pressure Washer. Important Safety Tips, Precautions, Warnings, and Usage Instructions 2-5. Assembly Instructions

K 3.99 M. English 2 Español 17 Français /05

1200 EVERYDAY PRESSURE WASHER. Instruction Manual. Model: PW If you have any questions or comments, please call our toll free

ELECTRIC PRESSURE WASHER

K 2.20 M. English 2 Español Français /09

Owner s Manual & Safety Instructions

K 5.93 M. English /06

SIMONIZ ( )

High Pressure Washer Operator Manual. Specifications Model HD 2700 DH/DB

K 3.48 M. English /07

Have a Question? Call toll-free: Owners Manual L WARNING. Project Series Paint Sprayers Important Safety Instructions

PS /2 Inch Angle Grinder Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

IMpORTANT SAFETy INSTRUcTIONS

OPERATOR'S Manual. Model YF4050PB. Before operating this product, please read this manual thoroughly and retain it for future reference.

Operator s Manual. 6 Gallon Model No. VQ607SFD FOR YOUR SAFETY. Read and understand this manual before use Keep this manual for future reference

Model K 5800 G Part No

K 5.85 M /06

ORIGINAL INSTRUCTIONS

K /11

Operator s Manual. Floor Vac Model No. VF408 FOR YOUR SAFETY. Read and understand this manual before use Keep this manual for future reference

Operating Instructions

K 5.68 M HIGH PRESSURE WASHER - OPERATOR MANUAL NETTOYEUR HAUTE PRESSION - MANUEL D'UTILISATION MANUAL DE USUARIO DEL LIMPIADOR DE ALTA PRESIÓN

Model HD 3000 Part No High Pressure Washer Operator Manual

K 3.68 M. English 3 Español 19 Français /06

OPERATOR S MANUAL. ET D ( ) ET Dx2 ( ) For the dealer nearest you consult our web page at

Operator s Manual. Wet/Dry Vacuum with Detachable Blower 12 Gallon Model No. VBV1210 FOR YOUR SAFETY

1500 PSI Electric Pressure Washer

Important - Please read these instructions fully before operating or maintaining. Warning Symbols...3. General Safety...4. Personal Safety...

K English 2 Español 17 Français /13

20-GALLON MOBILE PARTS WASHER OWNER S MANUAL

2200 PSI Electric High Pressure Washer

Operator s Manual. 2.5 Gallon Model No. VOM205P FOR YOUR SAFETY. Read and understand this manual before use. Keep this manual for future reference.

OPERATOR S MANUAL FOR YOUR SAFETY. 4 Gallon / Liter Part No. PB408SV

Transcription:

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. Electric Pressure Washer Specifications: Max Max Max Unit Model PSI GPM Temp Voltage Amps Weight 1750 1.5 122 F 120V 12.5 26 lbs Safety Guidelines: This manual contains information that is very important to know and understand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols. Warning indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury. Caution indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. - 122008 www.arnorthamerica.com 1 NOTE or NOTICE: Information that requires special attention. Important This pressure washer is equipped with a microswitch sensitive to water flow. This Total Stop System (TSS) senses water flow in the pump. When the trigger is released, water stops flowing through the pump. The TSS then automatically turns the motor off to protect the pump from overheating. NORTH AMERICA First Choice When Quality Matters

10 1 2 9 3 8 7 6 4 5 D Package Content: 1. Pressure Water Unit 2. Manual 3. Adjustable Spray Nozzle 4. Turbo Nozzle 5. Gun 6. Detergent Tank 7. Nozzle Cleaning Tool 8. High Pressure Hose 9. Garden Hose Fitting 10. Accesories Holder Gun Safety Button (D) 2 www.arnorthamerica.com

Operation using the product. 2. Always disconnect power 1. Pull trigger on gun. before disassembling or 2. Turn the ON/OFF switch to repairing the unit. ON. 3. Follow all safety codes as well 3. Release trigger. The pressure as the Occupational Safety and washer motor will stop running. Health Act (OSHA). 4. To spray again, pull trigger and 4. Ensure safety devices are motor and pump will restart. operating properly before each use. DO NOT remove or modify Note: Occasionally the motor may any part of the gun or unit. run for a short time to bring fresh, 5. Know how to stop this product cool water into the pump even if and bleed pressure quickly. Be the trigger is released. This is part thoroughly familiar with the of normal operation and will not controls. damage the unit. 6. Stay alert - watch what you are doing. Always turn 7. Do not operate the product the ON/OFF when fatigued or under the switch to OFF then trigger gun influence of alcohol or drugs. to release hose pressure before 8. Keep operation area clear of all unplugging the power cord. persons. 9. Do not overreach or stand on Risk of equipment unstable support. Keep good damage. Always footing and balance at all make sure the ON/OFF switch times. on the unit is OFF and unit is 10. Follow the maintenance unplugged prior to storage. instructions specified in the manual. Risk of Injection. 11. This product is provided with a Unit will start ground fault circuit interrupter, spraying when trigger is squeezed GFCI, be sure to inspect cord if ON/OFF switch is in ON and GFCI prior to use. Any position. Always point gun in a repair or replacement of the safe direction. power cord must be performed by a qualified (licensed or Important Safety Instructions certified) electrical technician. 12. Never use an extension cord Save These Instructions with this product. 13. The power cord on this product contains chemicals, including When using this product, basic lead, known to the State of precautions should always be California to cause [cancer followed, including the following: and] birth defects or other reproductive harm. Wash 1. Read all instructions before hands after handling. 3 www.arnorthamerica.com

Important Safety Instructions (cont) 14. To reduce the risk of injury, close supervision is necessary when a product is used near children. pressure may still exist in unit. To discharge pressure, point gun in safe direction and squeeze trigger. Risk of Explosion Risk of Electrocution Inspect cord before using - Do not use if cord is damaged. Keep all electrical connections dry and off the ground. Do not touch plug with wet hands. This product is provided with a ground fault circuit interrupter built into the power cord plug. If replacement of the plug or cord is needed, use only identical replacement parts. Do not spray electrical apparatus and wiring. Risk of Injection or Sever Injury High pressure. Keep clear of nozzle. Do not discharge streams at persons or animals. Never put hand or fingers over spray tip while operating the unit. Never try to stop or deflect leaks with any body part. Always engage the trigger safety latch in the safe position when spraying is stopped even if only for a few moments. Point gun in safe direction. Unit will start spraying when trigger is squeezed if on/off switch is in ON position. Discharge pressure - When on/ off switch is in OFF position, Do not spray flammable liquids. Never use in areas containing combustible dust, liquids, or vapors. High pressure - Gun kicks back - Hold gun with both hands. Keep hose away from sharp objects. Bursting hoses may cause injury. Examine hose regularly and replace if damaged. Do not attempt to mend a damaged hose. Note Use only detergents specifically formulated for pressure washers. Always follow detergent manufacturer s label recommendations for proper use of detergents. Always protect eyes, skin, and respiratory system from detergent. For either indoor or outdoor use. Store indoors and where temperature stays above freezing. Unplug unit when not in use. Pressure washer is not meant to pump hot water. Do not connect to hot water supply. Never leave the unit unattended while it is plugged in. Always turn water supply ON before turning pressure washer 4 www.arnorthamerica.com

ON. Running pump dry causes damage. Servicing of a Double- Insulated Appliance In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding means are provided for a double-insulated product, nor should grounding means be added to the product. Servicing a double-insulated product requires extreme care and knowledge of the system, and should be done only by qualified service personnel. Replacement parts for a doubleinsulated product must be identical to the original parts. A doubleinsulated product is marked with the words Double Insulation or Double Insulated. Product may also be marked with symbol shown below. Do not use pressure that exceeds the operating pressure of any of the parts (hoses, fittings, etc.) in the pressurized system. Ensure all equipment and accessories are rated to withstand the maximum working pressure of the unit. Do not spray electrical apparatus and wiring. Never disconnect the high pressure discharge hose from the machine while the system is pressurized. To depressurize machine, turn power and water supply off, then press gun trigger 2-3 times. Never permanently engage the trigger mechanism on the gun. Never operate the machine without all components properly connected to the machine (handle, gun/wand assembly, nozzle, etc.). damage. Equipment ALWAYS turn water supply ON before turning pressure washer ON. Running pump dry causes serious damage. Do not operate the pressure washer with the inlet water screen removed. Keep screen clear of debris and sediment. NEVER operate pressure washer with broken or missing parts. Check equipment regularly and repair or replace worn or damaged parts immediately. Use only the nozzle supplied with this machine. Never leave the wand unattended while the machine is running. Never attempt to alter factory settings. Altering factory settings could damage the unit and will void the warranty. Always hold gun and wand firmly when starting and operating the machine. 5 www.arnorthamerica.com

Servicing of a Double- Insulated Appliance (cont) 2. Attach garden hose to swivel adapter side marked hose. NEVER allow the unit to run with the trigger release (off) for more than one (1) minute. Resulting heat buildup will damage pump. Pressure washer is not meant to pump hot water. NEVER connect it to a hot water supply as it will significantly reduce the life of the pump. NEVER store the pressure washer outdoors or where it could freeze. The pump will be seriously damaged. Release trigger when changing from high to low pressure modes. Failure to do so could result in damage. Keep hose away from sharp objects. Bursting hoses may cause injury. Examine hoses regularly and replace if damaged. Do not attempt to mend a damaged hose. Garden Hose Connection Instructions 1. Attach swivel adapter to pump water inlet, if not already attached. Notice the swivel adapter is marked with the words pump and hose. Make sure to connect pump side of the adapter to the pump water inlet to prevent damage to the threads. 3. The spray gun should be locked into the OFF position by locating the safety trigger lock just above the trigger of the gun. Activate the lock by holding the gun and push the lock from left to right. Squeeze trigger to make sure the trigger does not move. The safety trigger lock should be locked at all times when pressure washer is not in use. Power Cord 1. Plug the power cord into a grounded 120V outlet and press the reset button as shown below. 2. THIS MUST BE DONE EACH TIME THE UNIT IS PLUGGED IN AN OUTLET. Reset Pump Hose 6 www.arnorthamerica.com

System Connection 1. Insert lance adapter into the gun and turn clockwise to positive stop as shown below. 4. Attach the high pressure hose onto the pump water outlet by turning clockwise and hand tightening. Pump High Pressure Hose 2. Press release button on bottom of gun toward back of the gun, then insert high pressure hose. 3. Be sure that the power switch is in the OFF position. 5. Connect garden hose as explained under Garden Hose Connection Instructions. 6. Plug the power cord into a grounded 120V outlet. 7. Turn water on. 8. Unlock trigger lock by moving lock right to left. 9. Depress and hold the trigger on the gun for one minute to release pressure and remove any air trapped in the system. 10. Turn the ON/OFF switch to the ON position. How to Avoid Damaging Surfaces Directions for Use Damage to cleaning surfaces occurs because the impact force of the water exceeds the durability of the surface. You can vary the impact force by controlling the nozzle s fan pattern, the nozzle s angle to the cleaning surface, and the nozzle s distance from the cleaning 7 www.arnorthamerica.com

How to Avoid Damaging Surfaces (Cont) surface. Never use a narrow high impact stream or a turbo nozzle on a surface that is susceptible to damage. Avoid spraying windows with a narrow high impact stream or turbo nozzle. Doing so may break the window. The surest way to avoid damaging surfaces is to follow these steps. stream setting. This opens up the fan blades. Using the included tip cleaner, or an un-folded paper clip, insert wire into the nozzle hole and move back and forth until debris is dislodged. Cleaning Instructions 1. Before triggering the gun, adjust the nozzle to a wide fan pattern. 2. Place the nozzle approximately 4-5 feet away from the cleaning surface. Then hold the nozzle at a 45 angle to the cleaning surface. Trigger the gun. 3. Vary the fan pattern spray angle and the distance to the cleaning surface until optimum cleaning efficiency is achieved without damaging the surface. A clogged or partially clogged nozzle can cause a significant reduction of water coming out of the nozzle and cause the unit to pulsate while spraying. Remove additional debris by back-flushing water through the nozzle. To do this, remove the lance from the gun, place end of a garden hose (with water running) to tip of nozzle pushing water and debris out the back opening of the lance. Detergents Nozzle Cleaning Instructions To clean out the nozzle: Turn off the unit. Turn off the water supply. Relieve any pressure trapped in the hose by squeezing the trigger 2-3 times. Separate lance from gun. Rotate nozzle to the narrow The use of detergents can dramatically reduce cleaning time and assist in the removal of difficult stains. Some detergents have been 8 www.arnorthamerica.com

customized for pressure washer use on specific cleaning tasks. These detergents are approximately as thick as water. The use of thicker detergents, such as dish soap, will clog the chemical injection system and prevent the application of the detergent. The cleaning power of detergents comes from applying them to a surface and giving the chemicals time to break down the dirt and grime. Detergents work best when applied at low pressure. 4. Spray pattern shape and intensity can be changed by twisting the spray adjuster at the end of the lance. Keep hands clear of the front of the lance to prevent injury. The combination of chemical action and high pressure rinsing is very effective. On vertical surfaces, apply the detergent starting at the bottom and working your way upward. This will prevent the detergent from sliding down and causing streaks. High pressure rinsing should also progress from the bottom to top. On particularly tough stains, it may be necessary to use a brush in combination with detergents and high pressure rinsing. Operation End of Operation 1. Press the ON/OFF switch to OFF on the pressure washer. 2. Disconnect the plug from the power source. 3. Shut off the water supply. 4. Activate the spray handle to relieve the machine of pressure. 5. Lock the trigger into the OFF position. 1. The lance is affected by pressure during operation; therefore hold it firmly with both hands and point the nozzle toward the ground. 2. Activate by pulling the trigger of the gun/spray handle. 3. Adjust the distance to the cleaning surface, which will also adjust your pressure of the nozzle. 9 www.arnorthamerica.com

1 3 2 6 4 5 7 8 Pos. Description Part Number Qty. 1 Detergent Tank AR3080160 1 2 Hose (QC) AR50969 1 3 Gun AR50968 1 4 Adjustable Lance/Nozzle AR50975 1 5 Turbo Lance/Nozzle AR50976 1 6 Switch Assembly AR3080170 1 7 Garden Hose Fitting (with filter) BQ09010305 1 8 Electric Cord w/gfci DX2731301100 1 Pump Spare Part Kits Water Seals & Valves Pre-Assembly TSS AR3081290 AR3082350 10 www.arnorthamerica.com

Notes 11 www.arnorthamerica.com

Pressure Washer Limited Warranty This product is under warranty to the original retail consumer against defects in material and workmanship for a period of 1 (one) year on machine, 90 days on gun and hose assembly, from the date of retail purchase and is not transferable. Warranty covers replacement parts. This limited one year warranty applies only to products used in consumer applications and does not apply to rental or commercial applications. Use reasonable care in the operation and maintenance of the pressure washer as described in the owner s manual. Warranty Returns Items returned for warranty consideration must have a Returned Merchandise Authorization (RMA) number. All unauthorized returns will be refused and shipped back to sender. Freight costs, if any, must be paid by the purchaser. Call 1-866-235-5112 Monday through Friday 8:00 a.m. - 5:00 p.m (Central Standard Time). Or E-Mail to: info@arnorthamerica.com 24 hours a day. A.R. North America, Inc. Attn: Pressure Washer Warranty Department 140-81st Avenue NE, Fridley, MN 55432 12 www.arnorthamerica.com