Fluorescent Dimming Ballast Selection Guide Where to go next: Fluorescent Lighting Controls Selection Guide, pg.96 Lamp Type Lamp Lamps Watts/ per Hi-lume Length Ballast Model # Tu-Wire Model # Eco-0 Model # Ballast Current T8 Linear and U-Tube 7W/4" ECO-T87-0- J7 \ "Dia FDB-47-0- ECO-T87-0- ECO-T87-0- 5W/48" ECO-T85-0- ECO-T85-0- W/48" W-T8-0- ECO-T8-0- FDB-487-0- W-T8-0- ECO-T8-0- ECO-T8-0- 40W/60" FDB-607-0- T Linear and U-Tube C~U /" Dia 0W/6" % iii pi si* 40W/48" T4 4-Pin Quad Tube 8W FDB-CF8-0--.0 < i= /" Dia FDB-CF8-0-- W-T48-0- 45.4(.4 7 ) 6W FDB-CF6-0-- W-T46-0- 45.(.?7) FDB-CF6-0-- W-T46-0- 4-5.44(.5 7 ) 44-Pin Triple Tube W FDB-Q-0-- W-T4-0- 4.( 7 ) /" Dia W-T4-0- 4 N/A(.58 7 ) 4W FDB-Q4-0--.9 T5 Twin Tube ^f, n C/Q" n:-. s& -> jio U\a 9W/6" 40W/" 50W/" Ballasts for ', 4', 6', 7' and 8' T HO 0V lamps available, consult factory. Consult factory for compatibility. Add suffix -E or -B to denote wires exit END or BASE of ballast. Models with -B suffix include mounting studs. T FDB-64-0- FDB-64-0- FDB-64-0- FDB-7-0- FDB-7-0- FDB-7-0- FDB-4-0- FDB-4-0- ECO-T59-0- ECO-T59-0- ECO-T59-0- ECO-T540-0- ECO-T540-0- ECO-T540-0- ECO-T550-0- ECO-T550-0-..58.85..6.88.8.69 4 Add suffix -S if mounting studs desired. B Dims both quad and triple tube 4-pin lamps. 6 Eco-0 ballast current. 7 Tu-Wire ballast current. ''n\* LUTROISL To Order/Customer Service 8am-8pm ET (US/CAN)»888»LUTRON 95
Where to go next: Fluorescent Ballast Selection Guide, pg.94; Fluorescent Lighting Controls Selection Guide, pg.96 B i i i_j escent Lighting Controls And Dimming Ballasts *+ +j *j Lutron makes it simple to dim fluorescent lighting in any room Lutron brings the experience of smooth, continuous, full-range dimming to fluorescent lighting The secret to making fluorescent lighting simple is lighting controls and dimming ballasts that have been specially engineered to work together Lutron offers ballasts that dim all popular fluorescent lamp types and manual, remote controlled and multi-scene preset lighting controls in a wide range of styles and colors, see pgs.94-97 uoresceni uimming upnons Lutron dimming ballasts-superior performance, legendary reliability, and available for all popular lamp types For architectural dimming (00%-%): use the premier Hi-lume electronic fluorescent dimming ballast to experience continuous full-range dimming For high-performance dimming (00%-5%): to dim popular, energy efficient compact lamps and linear lamps, use Hi-lume Compact and Tli-Wire electronic fluorescent dimming ballasts For lighting management (00%-0%): use Eco-0 electronic fluorescent dimming ballasts for commercial and institutional applications Commercial Dimming Solutions Lutron has the fluorescent solution for any room or building In the workplace Lutron offers fluorescent solutions for any room including conference rooms, private offices, training areas and open office areas For colleges and universities, Lutron offers fluorescent solutions for classrooms, lecture halls, auditoriums and other areas J^gIDiicli,. Wireless Multi-Zone Control for Lights, Shades, and Audiovisual Equipment Contact Customer Service for more information OLUTRON. To Order/Customer Service 8am-8pm ET (US/CAN)»888»LUTRON 9
How to Order Fluorescent Dimming Ballasts nij Decide what type of amp to dim Select the lamp type at right, then find it in the chart on the next page I Find the lamp watts/lamp length required and # of lamps per ballast Consult fixture manufacturer or check fluorescent fixture and lamps for this information QiSelect dimming ballast based on whether you want %, 5%, or 0% maximum dimming m Use % or 5% dimming for residential applications Choose the fluorescent lighting control that's right for your dimming ballast T8 Linear T Linear 44-Pin 44-Pin TSTwin and U-Tube and U-Tube Quad Tube Triple Tube Tube V'Dia /" Dia /" Dia /" Dia 5/8" Dia For ballast options to dim T5HO lamps, contact Lutron Customer Service Example: One ballast controlling two lamps in a fixture dimming: architectural & 5% dimming: high performance Hi-lume Compact or Tu-Wire 0% dimming: energy management Eco-0 (ECO-Series) Example Shown: T8 Linear lamps W/48" See Fluorescent Lighting Controls Selection Guide, pg.96 j Vareo NovaT^V Diva Spacer System GRAFIK Eye control units Application Notes New fluorescent lamps must be operated ("seasoned") for 00 hours at full output to achieve proper dimming performance and average rated lamp life. Use only rapid-start type sockets with quality knife-edge contacts for linear lamps. Compact fluorescent lamps must use 4-pin type sockets. Lead length from ballast to socket must not exceed 7' (.m) for T5HO, T8 and T lamps, and '(0.9m) for T5 twin tube and T4 compact lamps. For Complete Specifications: www. I utron.com/bpspecs Ballast Specifications Power Factor: Ballast Factor: Total Harmonic Distortion: Sound Rating: Lamp Flicker: Frequency of Operation: In-Rush Current: Fusing: Min. Max. Starting Temp: Case Temp: >.95 >.85 <0% (Hi-lume, Eco-0, Hi-lume Compact) <0% (Tu-Wire) Inaudible in 7dB ambient None visible >5 khz (Hi-lume, Eco-0) >4 khz (Tu-Wire) 0X operating current Internal 0 C 75 C 94 OLUTFIOIM. Technical Support 4 Hours a Day/7 Days a Week»800»5»9466
Application Notes-Packaging and Global Ordering Clamshell and Boxed Packaging Bi-Lingual Packaging Global Product Approvals (f) @ OM Lutron Product Availability By Voltage Unless noted, all products shown in this catalog are 0V60HZ. The chart at right lists the product families that contain controls available in global voltages. Contact Lutron for a complete list of products and models available by voltage. Many Lutron products are available in both boxes and clamshell packages. Consult the Lutron Lighting Controls Price List or Lutron Customer Service for the complete listing of packages available for each product. Most Lutron products shown in the Dimmers and Fan-Speed section of this catalog are available in bi-lingual English/Spanish and English/French clamshell packaging suitable for retail display, with bi-lingual instructions included. For a complete list of foreign language packaging, please call your Lutron sales representative, or Lutron Customer Service at -60-8-800. All products in this catalog are UL listed; most are CSA approved; many are NOM approved. To check on these or other global product isting/approvals, contact Customer Service. Product 77V 0/40V 0V 00/00V Attache, pg.96 Claro Wallplates & Access., pg.70 Credenza, pg.96 Diva, pg.60 Eco-0 (Eco-Series) Ballasts, pg.94 GRAFIKEye, pg.04 Hi-lume Ballasts, pg.94 Hi-Power, pg.00 Homeworks lnteractive T M, pg.8 Maestro, pg.56 NovaT^, pg.6 Skylark, pg.64 Spacer System, pg.6 World Headquarters Lutron Electronics Co. Inc. 700 Suter Rd., Coopersburg, PA 806-99, USA Tel: +-60-8-800 (assistance available in over 40 languages; 4 hours a day/seven days a week) Germany Lutron Electronics GmbH LandsbergerAllee 0 055 Berlin, Germany Tel:+49-0-97-0-4590 Fax:+49-0-97-0-459 Hong Kong Lutron GL Ltd. Unit 06, F CEF Life Tower 48 Queen's Road East Wanchai, Hong Kong Tel:+85-04-77 Fax:+85-04-76 Japan Lutron Asuka Co., Ltd. Kowa Shiba-Koen Bldg.F --,Shiba-Koen Minato-ku, Tokyo 05-00 Japan Tel:+8--5405-7 Fax:+8--5405-7496 Tel: +-60-8-670 (en Espanol) Fax: +-60-8-4 Singapore Lutron GL Ltd. Singapore 6A Upper Cross Street Singapore 0586 Tel: +65-0-4666 Fax:+65-0-4 Spain Lutron Electronics Co. Inc. Oficina de Representacion en Espafia Calle Orense, 85 800 Madrid, Spain Tel:+4-9-567-8479 Fax:+4-9-567-8478 United Kingdom Lutron EA Ltd. Lutron House 6 Sovereign Close Wapping, London EWJF Tel: +44-(0)07-70-0657 Fax:+44-(0)07-480-6899 0LUTRON. To Order/Customer Service 8am-8pm ET (US/CAN)»888»LUTRON 5
ELECTRONIC FLUORESCENT DIMMING BALLASTS Electronic Fluorescent Dimming Ballasts Hi-lume. FOB Ballast: For Architectural Dimming Hi-lume Compact,- Ballast: For Use with Compact Fluorescent Lamps Eco-0 - Phase Control Ballast: For Workplace Dimming Eco-0.. 0 Volt Option Ballast: For 0-0VDC Signal Applications Architectural Dimming (00%-!%) Lobbies A/V Areas Conference Rooms Museums NEWP*»» CT! Workplace Dimming (00^0%) Open Office Spaces Perimeter Offices Lecture Halls TERCEIVED" LIGHT vs. DIMMED LIGHT The eye sees a % dimmed light as 0% total light. and a 0% dimmed light as % total light. 0% perceived FLUORESCENT DIMMING FOR PERSONNA., microwatl, GRAFIK EYE, & COMPATIBLE LUTRON WALLBOX CONTROLS Hi-iumfFDB (00%-!% dimming) (Architectural Fluorescent Dimming Ballast): see data sheet P/N60-4 Silent, flicker-free dimming from full to % of full light (see "Perceived Light" graph below) Meets virtually any application (lamp sizes, types and lengths) Models for. or lamps per ballast (0V and 77V) available from stock Global voltages available (0.V-40V-50.Hz or 60Hz)* Hi-iume Compact (00%-5% dimming) (Dimming Ballast for Compact Fluorescents); see data sheet P/N 60-8 and P/N 60-40 Dims new energy-saving compact fluorescent lamps Available for control of 0V and 77V, W, 6W and 8W, 4-pin compact fluorescent lamps Specify Hi-lume Compact dimming ballasts on all new fixtures. Call the Lutron HOTLINE for a list of fixture manufacturers Eco-JO Phase Control (00%-0% dimming) (Workplace Fluorescent Dimming Ballast); see data sheet P/N 60-79 Smooth, flicker-free fluorescent dimming down to 0% of full light output Meets virtually any application (lamp sizes, types and lengths) Models for, or lamps per ballast (0V and 77V) available from stock Eco-iO 0-Volt Option (00%-0% dimming) (Dimming Ballast for 0-OVDC Low-Voltage Signal Applications): see data sheet P/N 60-489 For direct connection to building management systems or daylight sensors, new and retrofit applications Use where lighting zones must be separated from electrical circuits A 0 YEAR HISTORY WORLD CLASS QUALITY Lutron ballasts meet and exceed the world's highest quality standards Just what you would expect from the company that introduced the electronic dimming baflast twenty years ago. Couple that with our track record for reliability and trouble-tree performance and you have a ballast you can count on for years to come. 5 To Order Call LUTRON Customer Sen/ice 60-8-800
ELECTRONIC FLUORESCENT DIMMING BALLASTS. t ' Ballast Selection Guide For Hi-lume, For Eco-0. LAMP TYPE/ LENGTH/WATTS «^ T5 6"L /9W "L MOW "L 'SOW! T8 4"L /7W 6"L /5W 48"L /W 60"L /40W SUPPLY VOLTAGE 0 VOLT 0 VOLT 0 VOLT 0 VOLT 0 VOLT 0 VOLT 0 VOLT HI-LUME MODEL FDB-64-0- FDB- 64-77- FDB-7-0- FDB-7-77- FDB-4-0- FDB-4-77- FDB-47-0- FDB-47-77- FDB-67-0- FDB-67-77- FDB-487-0- FDB-487-77- FDB-607-0- FDB-607-77- ^ :» ^ z 0 < o i TO COMPI < < ADD NO. LAMPS/ BALLAST.. OR., OR OB., OR,, OR,, OR OR LAMP TYPE/ LENGTH/WATTS SUPPLY VOLTAGE T5 6"L / 9W 0 VOLT "L / 40W 0 VOLT "L /SOW 0 VOLT Q T8 4"L M7W 0 VOLT 6T /5W 0 VOLT 48"L 'W 0 VOLT T8 FOR 0-0 VOLT CONTROL ADD NO. ECO-0 LAMPS/ MODEL S BALLAST fssr- ECO-T59-0- ECO-T59-77- ECO-T540-0- ECO-T540-77- ECO-T550-0- ECO-T550-77- ECO-T87-0- ECO-T8 7-77- ECO-T85-0- ECO-T85-77- ECO-T8-0- ECO-T8-77-,. OR ADD.,, OR OR ADD',, OR OR,, OR f^ T 6 - L ' 0W 48"L,'40W 0 VOLT 0 VOLT FDB-64-0- FDB-64-77- FDB-484-0- FDB-484-77- O ADD NUMBE OR 0R 48"L,'W 0 VOLT TVE-T8-0- TVE-T8-77- Eco-0 0- Volt option ballasts are available for other T5 and T8 lamps. Contact Lutron for more information. I '..0R EXAMPLE: Your fixture has () T8, W lamps supplied by 0 Volts. Complete Hi-lume ballast model is FDB-487-0-. EXAMPLE: Your fixture has () T8. W lamps supplied by 77 Volts. Complete Eco-0 ballast model is ECO-T8-77-. Hi-lume and Eco-0 Dimming Ballast and Control Application/Installation Notes All lamps must be "rapid-start" fluorescent. Do not use T- "energysaving" lamps * Each dimming ballast must be mounted in the fixture with the lamp(s) il is controlling. Keep the lead length between the ballast and the lamps under 7 feet ( feet for ballasts that control T-5 lamps) * New lamps must be burned in at full intensity for 00 hours before dimming * Do not mix Hi-lume OSPCLJ dimming ballasts (no longer in production) with Hi-liime FOB or Eco-0 on the same control. Do not mix magnetic dimming ballasts with Hi-lume FOB or Eco-0 on the same control * Lutron does not recommend combining Eco-0 and Hi-lume ballasts. When placed on the same circuit with a shared control, fixtures controlled by Eco-0 and Hi-lume ballasts will produce different light intensities * For capacities in multigang installations see ganging and derating information, pages 56-57 Phase Control ballasts require three line-voltage wires: hat, dimmed hot and neutral Eco-0 0-Voit Option ballasts require two line-voltage wires: hot and neutral, and two low-voltage 0-0VDC Class wires For wiring information, see page 59 For More Information Contact the Lutron Hotline at -800-5-9466 lo request the following data sheets: Hi-lume FDB-series data sheet (P/N 60-4) Hi-lume Compact data sheets: P/N 60-8 for 6W and 8W Quad-tube P/N 60-40 far W Triple-tube Eco-0 Phase Control data sheet (P/N 60-79} Eco-0 0-Volt Option data sheet (P/N 60-489) Specify Lutron's exclusive -lamp dimming ballast.