Venetian Blind Systems
Application Chart Dimensions Features / Options Fitting Options Fitting Surfaces Operation Side Guide available Slat widths (mm) Twin Operation Mono operation Radio Control Perforated Slats (25mm only) Dual action wand Privacy (min light) Ceiling Fix Wall Fix Wood Concrete Suspended Ceiling System 28cm 2.5m 2.5m 4m² 8100 28cm 2.5m 2.5m 5m² 8110 28cm 3m 5m 7m² 25 50cm 3m 3m 4.5m² 5 8300 25 24 V 65cm 3m 3.4m 5 m² 25 8250 2
Cord/Wand operated Venetian Blind System 8100 Cord/Wand operated Venetian Blind Product Information Venetian blind system for mm aluminium slats. Small headrail which allows the fitting in narrow window frames. Unique user-friendly control wand, combining tilt operation of slats with integrated cords for fast raising/lowering of the blind. Left or right hand operation with various wand lengths available. Available in 77 different slat colours. The system can be used up to a maximum width of 2.5 m. The maximum system drop and surface are 2.5 m and 4 m². The system 8100 can be equipped with side-guide wires and can therefore be used for sloped applications up to 15 inclination. The top stack of the slats can measure up to 12% of the blind drop (depending on slat widths and make-up). Please refer to the specific stack height charts. Beside fixation on window frame, this system can also be easily fitted with snap brackets on ceilings or walls. Delivered ready assembled. 8100 3
Profile Information Profile for mm Slats 21 32.3 8101 System Dimensions & Slat Stack Height 2.5 m 28 cm 2.5 m 4 m² Slat stack height calculation 50 (cm) 75 100 125 150 175 200 225 250 6.1 7.0 7.9 8.8 9.7 10.6 11.5 12.4 13.3 8100 Please note that the indicated stack heights may vary by up to 1 cm. System Options Side guides for stabilising blind system and sloped applications (up to 15 ) A B C A and B: Fitting of side guides inside window frame (A: detail eyelet / B: detail wireholder) C: Fitting of side guides onto front of window frame The system 8100 can be equipped with side-guide wires and can therefore also be used for sloped applications up to 15 inclination. 4
Fitting Information Bracket Positioning 5 cm 80 100 cm 80 100 cm 5 cm Side gaps when side-by-side fitting or recess fitting The light gap between two systems, when fitted side-by-side, has been minimized to only 5 mm. 5 mm 8100 2 3 mm Distance from wall when recess fitting is 2-3 mm. Fitting Options CAD download through Silent Gliss website Ceiling fitting with bracket 8103 ( mm) / 8149 31 23 33 20 44 8103 Bracket ( mm) 8149 Bracket (44mm) Please note: Optional bracket 8149 for inside window frame fitting. 5
Recess fitting with bracket 8103 ( mm) 23 33 31 70 100 8103 Bracket ( mm) Wall or window frame fitting with bracket 8103 ( mm) 23 33 31 32 8103 Bracket ( mm) Wall fitting with brackets 3134-35 and bracket 8103 ( mm) (mm) 9 3134 60 3135 80 50 60 / 80 3134-35 Brackets 60 3133 Bracket cover (60mm) 31 23 33 8103 Bracket ( mm) Wall fitting with adjustable bracket support 3271 / bracket plates 3272-73 and bracket 8103 ( mm) 8100 (mm) 3271/3272 75-95 3271/3273 90-120 45 54 69 114 31 23 33 20 3271 Bracket support 3272-73 Bracket plates 8103 Bracket ( mm) Wall fitting with bracket support 3271 and bracket 8103 ( mm) 50 45 54 20 3271 Bracket support 31 23 33 8103 Bracket ( mm) 6
Standard Accessories 8003 Profile (mm) 8006 Slat (mm) 8012 Bottom clip ( mm) 8101 Profile 8103 Bracket ( mm) 8105 End cover ( mm) 8111 Tilter holder ( mm) 8113 Tilter holder with pulley ( mm) 8115 Tilter ( mm) 8117 Holder cover ( mm) 8119 Profile 8121 Stop ring ( mm) 8123 Gear box left ( mm) 8124 Gear box right ( mm) 8145 Cord tassel inner 2 8146 Cord tassel inner 3 8238 Endcover ( mm) 10090 Pipe set (225 mm) 10091 Pipe set (385 mm) 10092 Pipe set (585 mm) 10093 Pipe set (785 mm) 10094 Pipe set (985 mm) 10095 Pipe set (1185 mm) 10096 Cord lock 8100 10097 Snap ring 10098 Brake spring 10099 Cord tassel outer 10100 Cord tassel bush 10109 Slat clip ( mm) 101 Ladder cord ( mm) 10119 Lift cord ø 1.4 mm 10126 Pipe set (1385 mm) 10127 Pipe set (1585 mm) 10128 Pipe set (1800 mm) 7
Optional Accessories 3133 Bracket cover (60mm) 3134 Bracket (60mm) 3135 Bracket (80mm) 3271 Bracket support 3272 Bracket plate (69mm) 3273 Bracket plate (92mm) 8128 Spacer (4 ) 8129 Spacer (10 ) 8149 Bracket (44mm) 8235 Wire base short 8236 Wire base long 8237 Wire holder 8241 Eyelet 8249 Device 10113 Extension pipe (1800 mm) 10114 Pipe joint 10115 Threaded pin M3x3 10120 Wire ø 0.9 mm for side guiding Useful Measures 8100 8003 Profile (mm) 10 8006 Slat (mm) 1.5 15.7 21 12 8105 End cover ( mm) 26 101 Ladder cord ( mm) 21 10119 Lift cord ø 1.4 mm ø1.4 10120 Wire ø 0.9 mm for side guiding ø0.9 8
Cord/Wand operated Venetian Blind System 8110 Cord/Wand operated Venetian Blind Product Information Venetian blind system for mm or 25 mm aluminium slats. Unique user-friendly control wand, combining tilt operation of slats with integrated cords for fast raising/lowering of the blind. Left or right hand operation with various wand lengths available. Available in 77 different slat colours. Also perforated slats available for 25 mm slats. The system can be used up to a maximum width of 3 m (25 mm slats), respectively 2.5 m ( mm slats). The maximum system drop and surface with 25 mm are 5 m and 7 m², respectively 2.5 m and 5 m² when using mm slats. The system 8110 can be equipped with side-guide wires and can therefore be used for sloped applications up to 15 inclination. The top stack of the slats can measure up to 12% of the blind drop (depending on slat widths and make-up). Please refer to the specific stack height charts. Beside fixation on window frame, this system can also be easily fitted with snap brackets on ceilings or walls. Special optional privacy feature (PC) available for 25 mm slats, where the slats are punched with a special method to ensure no direct light penetration when slats are closed. Delivered ready assembled. 8110 9
Profile Information 27.4 31.7 10037 System Dimensions and Slat Stack Height 2.5 m ( mm slats) 3 m (25 mm slats) 28 cm ( and 25 mm slats) 2.5 m ( mm slats) 5 m (25 mm slats) 5 m² ( mm slats) 7 m² (25 mm slats) Slat stack height calculation (cm) 50 75 100 125 150 175 200 225 250 275 300 325 6.1 7.0 7.9 8.8 9.7 10.6 11.5 12.4 13.3 25 (PC) 6.4 7.3 8.1 9.1 9.6 10.6 11.5 12.3 13.2 14.0 15.0 15.9 8110 350 375 400 425 450 475 500 (cm) 25 (PC).7 17.6 18.4 19.3 20.2 21.0 21.9 Please note that the indicated stack heights may vary by up to 1 cm. System Options Privacy feature (PC) available for 25 mm slats / Option The slats are punched with a special method to ensure no direct light penetration when slats are closed. The PC feature on 8110 is ideal for use in offices and helps compliance with EC computer shading regulations. 10
Side guides for stabilising blind system and sloped applications (up to 15 ) A B C A and B: Fitting of side guides inside window frame (A: detail eyelet / B: detail wireholder) C: Fitting of side guides onto front of window frame The system 8110 can be equipped with side-guide wires and can therefore also be used for sloped applications up to 15 inclination. Fitting Information Bracket Positioning 5 cm 80 100 cm 80 100 cm 5 cm Side gaps when side-by-side fitting or recess fitting 8110 The light gap between two systems, when fitted side-by-side has been minimized to only 5 mm. 5 mm 2 3 mm Distance from wall when recess fitting is 2-3 mm. 11
Fitting Options Ceiling fitting with bracket 10101 25 42.7 31 10101 Bracket Recess fitting with bracket 10101 25 42.7 31 70 100 10101 Bracket Wall or window frame fitting with bracket 10101 25 42.7 31 22 10101 Bracket 8110 Wall fitting with brackets 3134-35 and bracket 10101 (mm) 9 3134 57-59 3135 77-79 50 60 / 80 3134-35 Brackets 60 3133 Bracket cover (60mm) 31 25 10101 Bracket 42.7 12
Wall fitting with adjustable bracket support 3271 / bracket plates 3272-73 and bracket 10101 (mm) 3271/3272 76-98 3271/3273 90-122 45 54 69 114 31 25 42.7 20 3271 Bracket support 3272-73 Bracket plates 10101 Bracket Wall fitting with bracket support 3271 and bracket 10101 45 54 31 25 42.7 20 50 52 3271 Bracket support 10101 Bracket Standard Accessories 8003 Profile (mm) 8004 Profile (24.3mm) 8006 Slat (mm) 8007 Slat (25mm) 8012 Bottom clip ( mm) 8013 Bottom clip (25 mm) 8120 Profile 8145 Cord tassel inner 2 8110 8146 Cord tassel inner 3 8238 Endcover ( mm) 8239 End cover (24mm) 10037 Profile 10077 End cover (25 mm) 10081 Shaft stop 10082 Gear box 10083 Sleeve cover 10084 Gear spacer 10085 Gear box cover 10086 Tilter holder without pulley 10087 Tilter holder with pulley 10088 Tilter 10089 Brake spacer 13
10090 Pipe set (225 mm) 10091 Pipe set (385 mm) 10092 Pipe set (585 mm) 10093 Pipe set (785 mm) 10094 Pipe set (985 mm) 10095 Pipe set (1185 mm) 10096 Cord lock 10097 Snap ring 10098 Brake spring 10099 Cord tassel outer 10100 Cord tassel bush 10101 Bracket 10103 Click (25 mm) 10104 Slat clip (25 mm) 10108 Click ( mm) 10109 Slat clip ( mm) 101 Ladder cord ( mm) 10117 Ladder cord (25 mm) 10119 Lift cord ø 1.4 mm 10126 Pipe set (1385 mm) 10127 Pipe set (1585 mm) 10128 Pipe set (1800 mm) 8110 Optional Accessories 3133 Bracket cover (60mm) 3134 Bracket (60mm) 3135 Bracket (80mm) 3271 Bracket support 3272 Bracket plate (69mm) 3273 Bracket plate (92mm) 8235 Wire base short 8236 Wire base long 8237 Wire holder 8241 Eyelet 8249 Device 10113 Extension pipe (1800 mm) 10114 Pipe joint 10115 Threaded pin M3x3 14
10118 Ladder cord (25 mm) PC 10120 Wire ø 0.9 mm for side guiding Useful Measures 24.3 8003 Profile (mm) 10 8004 Profile (24.3mm) 10.3 8006 Slat (mm) 1.5 8007 Slat (25mm) 2.2 15.7 24.5 10.3 27.4 12 10077 End cover (25 mm) 31.7 101 Ladder cord ( mm) 21 10117 Ladder cord (25 mm) 31 21 10118 Ladder cord (25 mm) PC 31 18 10119 Lift cord ø 1.4 mm ø1.4 10120 Wire ø 0.9 mm for side guiding ø0.9 8110 15
8110
Motorised Venetian Blind System 8250 Motorised Venetian Blind Product Information Electrically operated venetian blind system for mm or 25 mm aluminium slats. Available in 77 different slat colours. Also perforated slats available for 25 mm slats. The system can be used with a minimum width of 65 cm, up to a height of 2 m. With a minimum width of 80 cm, the system can be used up to a height of 3.4 m. The maximum system width and surface are 3 m and 5 m². The system 8250 can be equipped with side-guide wires and can therefore be used for sloped applications up to 15 inclination. The top stack of the slats can measure up to 12% of the blind drop (depending on slat widths and make-up). Please refer to the specific stack height charts. The system can be easily fitted with snap brackets on ceilings or walls. Delivered ready assembled. Can be combined with Radio Remote Control System Silent Gliss 9940. 8250 17
Profile Information 27.2 31.2 8102 System Dimensions & Slat stack height 3 m 65 cm (up to a height of 2 m) 80 cm (up to a height of 3.4 m) 3.4 m 5 m² Slat stack height calculation (cm) 50 75 100 125 150 175 200 225 250 275 300 325 340 6.1 7.0 7.9 8.8 9.7 10.6 11.5 12.4 13.3 14.2 15.1.0.9 25 6.2 7.0 7.7 8.5 9.3 10.0 10.8 11.5 12.3 13.1 13.8 14.6 15.3 8250 Please note that the indicated stack heights may vary by up to 1 cm. System Options Side guides for stabilising blind system and sloped applications (up to 15 ) A B C A and B: Fitting of side guides inside window frame (A: detail eyelet / B: detail wireholder) C: Fitting of side guides onto front of window frame The system 8250 can be equipped with side-guide wires and can therefore also be used for sloped applications up to 15 inclination. 18
Radio Remote Control System Silent Gliss 9940 Combined with the Radio Remote Control System Silent Gliss 9940, this system offers maximum comfort with minimum wiring. For further details, please refer to catalogue section Motors & Controls. Fitting Information Bracket Positioning 7 cm 80 100 cm 80 100 cm 7 cm Attention: Never position the brackets 8201 on the take up reels. Side gaps when side-by-side fitting or recess fitting The light gap between two systems, when fitted side-by-side has been minimized to only 5 mm. 8250 5 mm 2 3 mm Distance from wall when recess fitting is 2-3 mm. 19
Fitting Options CAD download through Silent Gliss website Ceiling fitting with bracket 8201 29 18.1 38.8 8201 Bracket (31.5mm) Recess fitting with bracket 8201 29 18.1 38.8 min. 70 8201 Bracket (31.5mm) Wall or window frame fitting with bracket 8201 29 18.1 38.8 8250 33 8201 Bracket (31.5mm) Wall fitting with brackets 3134-37 and bracket 8201 (mm) 3134 57 3135 77 3136 97 3137 117 50 60 120 3134-37 Brackets 9 60 3133 Bracket cover (60mm) 38.8 29 18.1 8201 Bracket (31.5mm) 20
Wall fitting with adjustable bracket support 3271 / bracket plates 3272-73 and bracket 8201 57 3271/3272 75-95 29 18.1 3271/3273 90-120 45 54 69 114 38.8 20 3271 Bracket support 3272-73 Bracket plates 8201 Bracket (31.5mm) Wall fitting with bracket support 3271 and bracket 8201 29 18.1 50 45 54 20 3271 Bracket support 38.8 8201 Bracket (31.5mm) Standard Accessories 8003 Profile (mm) 8004 Profile (24.3mm) 8006 Slat (mm) 8007 Slat (25mm) 8010 Lift cord (ø 1.2 mm) 8012 Bottom clip ( mm) 8250 8013 Bottom clip (25 mm) 8025 Shaft 5x5 mm 8038 Shaft adaptor long 8039 Stop ring 8041 Bearing 8042 Cone long 8043 Cone short 8044 Cover long 8045 Cover short 8046 Ring 8047 Head rail adaptor 8048 Shaft adaptor 8049 Endstop (AMS 25) 8060 Motor (LW25 B83 0.8Nm) 8102 Profile 8106 End cover (25 mm) 21
8201 Bracket (31.5mm) 8238 Endcover ( mm) 8239 End cover (24mm) 10104 Slat clip (25 mm) 10109 Slat clip ( mm) 101 Ladder cord ( mm) 10117 Ladder cord (25 mm) 10283 Power Supply 1.5 DC Optional Accessories 3133 Bracket cover (60mm) 3134 Bracket (60mm) 3135 Bracket (80mm) 3136 Bracket (100mm) 3137 Bracket (120mm) 3271 Bracket support 3272 Bracket plate (69mm) 3273 Bracket plate (92mm) 8235 Wire base short 8236 Wire base long 8237 Wire holder 8241 Eyelet 8250 8249 Device 8262 Spacer (10 ) 8263 Spacer (4 ) 9052 Transformer power supply 2.5 10120 Wire ø 0.9 mm for side guiding Useful Measures 24.3 8003 Profile (mm) 10 8004 Profile (24.3mm) 10.3 8006 Slat (mm) 1.5 8007 Slat (25mm) 2.2 15.7 24.5 22
12 8010 Lift cord (ø 1.2 mm) ø 0.12 101 Ladder cord ( mm) 21 10117 Ladder cord (25 mm) 31 21 10120 Wire ø 0.9 mm for side guiding ø0.9 Motor & Controls The system 8250 is equipped with two different motor versions, depending on the size of the system. Motor Silent Gliss 8060 205 Torque: 0.4 Nm / 0.8 Nm Voltage: 24 V DC Current: 0.45 A / 0.65 A Speed: 40 rpm / 30 rpm Overload Protection CE Standard No end limit setting Weight: 195 g Operating Methods Combination of wall switch with single system 8250 230 V 24 V 10283 10283: Power Supply 1.5 DC Combination of wall switch with multiple systems 230 V 24 V 10283 10283: Power Supply 1.5 DC Transformer 10283 allows max. 2 systems connected, with optional Transformer 9052 max. 4 systems can be connected. Radio Remote Control System Silent Gliss 9940 System can be combined with Radio Remote Control System Silent Gliss 9940. For further details, please refer to catalogue section Motors & Controls. 23
Wiring and Connections Important: For other operating / wiring methods, please see section Motor & Controls, Silent Gliss 9940 or contact Silent Gliss. 8250 24
Chain Operated Venetian Blind System 8300 Chain Operated Venetian Blind Product Information Mono controlled, chain operated venetian blind system for mm or 25 mm aluminium slats. One single metal chain controls raising/lowering of slats and tilting. Left or right hand operation. Available in 77 different slat colours. Also perforated slats available for 25 mm slats. The situation of the control mechanism on the front of the headrail not only offers easy access and operation but also enables the side-by-side mounting of systems with a minimized light gap. The system can be used up to a minimum width of 50 cm and a maximum width of 3 m ( and 25 mm slats). The maximum system drop and surface are 3 m and 4.5 m². The system 8300 can be equipped with side-guide wires and can therefore be used for sloped applications up to 15 inclination. The top stack of the slats can measure up to 12% of the blind drop (depending on slat widths and make-up). Please refer to the specific stack height charts. The system can be easily fitted with snap brackets on ceilings or walls. Delivered ready assembled. 8300 25
Profile Information 29.3 35.5 8301 System Dimensions and Slat Stack Height 3 m 50 cm 3 m 4.5 m² Slat stack height calculation (cm) 50 75 100 125 150 175 200 225 250 275 300 6.6 7.5 8.4 9.3 10.2 11.1 12.0 12.9 13.8 14.7 15.6 25 6.7 7.5 8.2 9.0 9.8 10.5 11.3 12.0 12.8 13.6 14.3 Please note that the indicated stack heights may vary by up to 1 cm. 8300 System Options Side guides for stabilising blind system and sloped applications (up to 15 ) A B C A and B: Fitting of side guides inside window frame (A: detail eyelet / B: detail wireholder) C: Fitting of side guides onto front of window frame The system 8300 can be equipped with side-guide wires and can therefore also be used for sloped applications up to 15 inclination. 26
Fitting Information Bracket Positioning 7 cm 80 100 cm 80 100 cm 7 cm Side gaps when side-by-side fitting or recess fitting The light gap between two systems, when fitted side-by-side has been minimized to only 5 mm. 5 mm 8300 2 3 mm Distance from wall when recess fitting is 2-3 mm. Fitting Options Ceiling fitting with bracket 8302 29 28.8 43.6 8302 Bracket 27
Recess fitting with bracket 8302 29 28.8 43.6 70 8302 Bracket Wall or window frame fitting with bracket 8302 29 28.8 43.6 20 8302 Bracket Wall fitting with brackets 3134-35 and bracket 8302 (mm) 9 3134 59 3135 79 60 / 80 60 43.6 29 28.8 50 3134-35 Brackets 3133 Bracket cover (60mm) 8302 Bracket 8300 Wall fitting with adjustable bracket support 3271 / bracket plates 3272-73 and bracket 8302 (mm) 3271/3272 78-98 3271/3273 92-122 45 54 69 114 43.6 29 28.8 20 3271 Bracket support 3272-73 Bracket plates 8302 Bracket 28
Wall fitting with bracket support 3271 and bracket 8302 52 45 54 20 3271 Bracket support 43.6 29 8302 Bracket 28.8 Standard Accessories 8003 Profile (mm) 8004 Profile (24.3mm) 8006 Slat (mm) 8007 Slat (25mm) 8010 Lift cord (ø 1.2 mm) 8012 Bottom clip ( mm) 8013 Bottom clip (25 mm) 8214 Profile 8215 Adapter hex 8222 Ring 8224 Pin 8238 Endcover ( mm) 8239 End cover (24mm) 8248 Bead chain (ø 4 mm) 8300 8301 Profile 8302 Bracket 8305 Chain drive right 8306 Chain drive left 83 Spindle right 8317 Spindle left 8321 Support 8322 Device 10104 Slat clip (25 mm) 10109 Slat clip ( mm) 101 Ladder cord ( mm) 10117 Ladder cord (25 mm) 29
Optional Accessories 3133 Bracket cover (60mm) 3134 Bracket (60mm) 3135 Bracket (80mm) 3271 Bracket support 3272 Bracket plate (69mm) 3273 Bracket plate (92mm) 8235 Wire base short 8236 Wire base long 8237 Wire holder 8241 Eyelet 8249 Device 8262 Spacer (10 ) 8263 Spacer (4 ) 10120 Wire ø 0.9 mm for side guiding Useful Measures 24.3 8003 Profile (mm) 10 8004 Profile (24.3mm) 10.3 8300 8006 Slat (mm) 1.5 8007 Slat (25mm) 2.2 15.7 24.5 12 8010 Lift cord (ø 1.2 mm) ø 0.12 101 Ladder cord ( mm) 21 10117 Ladder cord (25 mm) 31 21 10120 Wire ø 0.9 mm for side guiding ø0.9 30
31 8300
www.silentgliss.com.au Unit 1B/107 Carnarvon Street Silverwater NSW 2128 Australia Tel: 02 9810 4300 Fax: 02 9810 4311 info@silentgliss.com.au 32 SGAUS_TB_VE_20120123 /