CERTIFICATE The Certification Body of TÜV SÜD Management Service GmbH certifies that AXITEC GmbH Otto-Lilienthal-Str. 5 D-71034 Böblingen has established and applies a Quality Management System for Contract manufacturing according to customer specifications, control of the production of photovoltaic modules by international manufacturing companies according to defined product specifications and distribution of such photovoltaic modules. (EA Code 19) An audit was performed, Report No. 70741655 Proof has been furnished that the requirements according to ISO 9001:2008 are fulfilled. The certificate is valid until 2014-08-07 Certificate Registration No. 12 100 34403 TMS Munich, 2012-06-13 QMS-TGA-ZM-07-92
CERTIFICATE The Certification Body of TÜV SÜD Management Service GmbH certifies that AXITEC GmbH Otto-Lilienthal-Str. 5 D-71034 Böblingen has established and applies a Environmental and Safety Management System for the following scope of application: Contract manufacturing according to customer specifications, control of the production of photovoltaic modules by international manufacturing companies according to defined product specifications and distribution of such photovoltaic modules. (EA Code 19) Performance of audits (Report-No. 70741655) has furnished proof that the requirements under: ISO 14001:2004 BS OHSAS 18001:2007 are fulfilled. This certificate is valid until 2015-06-05 Certificate Registration No. 12 104/116 34403 TMS Munich, 2012-06-12 TGA-ZM-07-92
Client: Axitec Solar GmbH Otto Lilienthal-Str. 5 71034 Böblingen Consultants: PI Photovoltaik-Institut Berlin AG Wrangelstraße 100 10997 Berlin Berlin, 08.05.2012 Declaration We hereby confirm that Axitec Solar GmbH has assigned (Offer No.: 20121460; Order No.: 201210920) PI Photovoltaik-Institut Berlin AG to perform the Salt Mist Corrosion Test according to IEC 61701 Ed.2 (incl. IEC 60068-2-52 Test Kb: Salt Mist, Cyclic, Severity Level 5) on two modules (AC-236P/156-60S, SN1: 2611094100688, SN2: 2611094100691). The Salt Mist Corrosion Test itself was subcontracted to TechnoLab GmbH, the pretests and the additional tests were performed at PI Photovoltaik-Institut Berlin AG. After the Salt Mist Corrosion Test there were no visual defects and the degradation of power was less than the requirement of the standard of -5%. The insulation tests met the requirements of the standard and the Bypass Diode Functionality Test was passed as well. The modules passed the Salt Mist Corrosion Test according to the standard. The following module types are covered by the test: AC-xxxP/156-60S xxx = 212W p -260W p Dipl.-Ing. Alexander Drobisch Dipl.-Ing. (FH) Michael Schoppa PI Photovoltaik-Institut Berlin AG PV Module technology Testing Consulting Development Research Wrangelstr. 100 10997 Berlin Company site: Berlin Trade register: Amtsgericht Charlottenburg Nr. HRB 106413 B Managing board: Dr. Paul Grunow, Prof. Dr. Stefan Krauter, Dipl.-Ing. Sven Lehmann Head of Supervisory board: Prof. Dr. Rolf Hanitsch Phone: +49 30 814 5264-0 Fax: +49 30 814 5264-101 www.pi-berlin.com VAT No.: DE252416715 Swift-BIC: DRES DE FF 100 IBAN: DE49 1008 0000 0943 3600 00 Bank account: Commerzbank AG BLZ: 100 80 000 Account: 094 33 60 000
Number KIP-076397/01 Replaces - Issued 17-01-2013 Scope PV Certification Expiry Date 17-01-2016 Contract number - Test Report Nr. 121001753 Page 1 of 1 Type Testing Certificate Photovoltaic (PV) Panels Kiwa hereby declares that the Photovoltaic Panels: Manufactured by: Axitec GmbH Otto-Lilienthal-Straße 5, D-71034 Böblingen, Models: AC-245P/156-60S Extended Models: AC-XXXM/156-72S; AC-XXXM/156-60S; AC-XXXM/156-54S; AC-XXXM/125-72S; AC-XXXP/156-72S; AC-XXXP/156-60S; AC-XXXM/156-54S. (XXX suffix indicates rated power) Comply with the type testing according to the following standards: IEC 62716 Ed.1 Draft C: April 2011 Ammonia corrosion testing of photovoltaic (PV) modules This type testing certificate is only valid for the sample tested by the test laboratory and is not valid for any other (production) sample. Furthermore this type testing certificate does not include: - the Initial and the Periodic Inspection of the Factory site(s) Test results are reported in the test report nr. AR 13 TEST 001 issued by our appointed laboratory Albarubens S.r.l. Publication of the certificate is allowed Kiwa Italia S.p.a. Sede Legale: Via Goffredo Mameli, 20 20129 Milano Sede Amministrativa e operativa: Via Treviso, 32/34 31020 San Vendemiano (TV) www.1kiwa.com Bouke Meekma Kiwa
Brussels, 01.01.2013 PV CYCLE Association a.i.s.b.l. declares hereby that based on current commitments Axitec GmbH is member of PV CYCLE a.i.s.b.l., which organizes the take-back and recycling of photovoltaic module waste in Europe*. This certificate is valid until 31.12.2013 www.pvcycle.org PV CYCLE a.i.s.b.l. is registered with BE 0893.027.827. Jan Clyncke Managing Director Membership reference N 100961F * Except Italy. Only PV CYCLE Italia SrL can issue certificates for take-back and recycling in Italy.