CYPRUS ORGANIZATION FOR THE PROMOTION OF QUALITY CYPRUS ACCREDITATION BODY ACCREDITATION CERTIFICATE no. IB 002-2 The Board of Governors of the Cyprus Organization for the Promotion of Quality acting as the authorized Cyprus Accreditation Body according to the Article 7 of the Law 156(Ι)/2002 grants accreditation to the TUV CYPRUS LIMITED in Nicosia which has been assessed according to the Accreditation Criteria for Inspection Bodies Type A as defined in the standard CYS EN ISO/IEC 17020:2012 as competent to perform the Inspections defined in the Scope of Accreditation referred to in the Annex of this certificate; the said Annex represents inextricable part of the certificate. The Accreditation Scope can only be modified after a decision of the Cyprus Accreditation Body. The current Accreditation Certificate, no. IB 002-2, is issued on the 28 th July 2017 and is valid till the 12 th May 2021. Accreditation was granted for the first time on the 13 th of May 2013. Antonis Ioannou Director CYS-CYSAB Date: 28 th July 2017
Annex of the Accreditation Certificate no. IB 002-2 SCOPE OF ACCREDITATION for TUV CYPRUS LIMITED as an Inspection Body Type A for Lifts. Valid from 13 May 2017 until 12 May 2021. Field of Inspection Type of Inspection Normative Regulations / Standards / In house procedures Lifts Directive 2014/33/EU R.A.A 309/2016 EN 81-1:1998+A3:2009 EN 81-2:1998+A3:2009 EN 81-20:2014 EN 81-21:2009+A1:2012 EN 81-22:2014 EN 81-50:2014 EN 81-58:2003 EN 81-70:2003 EN 81-70:2003/A1: 2004 EN 81-71:2005+A1:2006 EN 81-72:2003 EN 81-72:2015 EN 81-77:2013 -Type examination for lifts Annex IVB (Module B) -Final inspection for lifts Annex V -Conformity based on unit Annex VIII (Module G) verification for lifts Lifts Safety Components -EU-Type examination of safety components for lifts -Conformity to type with random checking for safety components for lifts Annex IVA (Module B) Annex IX (Module C2) Lifts Periodic Inspection R.A.A. 533/2012 R.A.A. 323/2013 p. 1/15
Authorised persons to sign the certificates issued by TUV CYPRUS LIMITED are the auditor / inspector who executes the inspection of the product, and a member of the management. The list with the authorized persons to sign the certificates: LIFTS Νο. 1 st signature Νο. 2 nd signature Auditor/inspector Management For inspections of Lifts according to the Directive 2014/33/EU 1 Louis Vakanas 1 Demos Demosthenous - Managing Director 2 George Zevlaris 2 Antonis Karyotis - Technical 3 George Nikolaides 3 Christos Serafim Deputy Technical 4 Kyriacos Kodjapashis 4 Sofia Andreou - Deputy Technical 5 Christos Serafim 6 George Tsagodimitropoulos 7 Sofia Andreou 8 Demetris Kodjapashis 9 Antonis Karyotis 10 Konstantinos Vamvakopoulos For periodic inspection of Lifts 1 Kyriacos Kodjapashis 1 Demos Demosthenous - Managing Director 2 Fotos Mavrommatis 2 Antonis Karyotis - Technical 3 Christos Serafim 4 Alexis Filippou 5 Demetris Kodjapashis 6 George Tsagodimitropoulos 7 George Zevlaris 8 George Nikolaides 9 Antonis Karyotis Address of the Body : Papaflessa, 2, 2235 Latsia, Nicosia, Cyprus p. 2/15
Annex of the Accreditation Certificate no. IB 002-2 SCOPE OF ACCREDITATION for TUV CYPRUS LIMITED as an Inspection Body Type A for Transportable pressure equipment: Valid from 13 May 2017 until 12 May 2021. Field of Inspection Type of Inspection Normative Regulations / Standards / In house procedures Transportable pressure equipment Directive 2010/35/EU Law.17(Ι)/2012 R.A.A. 146/2012 ADR (valid issue) Agreement CYS EN 12972:2007 -Pressure receptacles, including their valves and other accessories when appropriate, as covered in Chapter 6.2 of the ADR (valid issue) Agreement and the Annexes of the Directive 2008/68/EC Tanks, battery vehicles/wagons, multipleelement gas containers (MEGCs), their valves and other accessories when appropriate, as covered in the Chapter 6.8 of the ADR (valid issue) Agreement and the annexes of the Directive 2008/68/ΕΚ. -Conformity assessment activities -Exceptional checks -Intermediate inspections -Periodic inspections -Reassessment of conformity Section I.1 of Annex I, Section ΙI.1 of Annex IΙ, Section IΙΙ.1 of Annex IΙΙ, of Directive 2008/68/ΕC Annex III of Directive 2010/35/EU Section I.1 of Annex I, Section II.1 of Annex II, and Section III.1 of Annex III to Directive 2008/68/EC Annex III to Directive 2010/35/EU p. 3/15
Authorised persons to sign the certificates issued by TUV CYPRUS LIMITED are the auditor / inspector who executes the inspection of the product, and a member of the management. The list with the authorized persons to sign the certificates: TRANSPORTABLE PRESSURE EQUIPMENT Νο. 1 st signature Νο. 2 nd signature Auditor/inspector Management 1 Costas Agelakos 1 Demos Demosthenous - Managing Director 2 George Nikolaides 2 George Nikolaides Technical 3 Christos Zachariades 1 3 Antonis Karyotis - Deputy Technical 4 Nicos Polydorides 5 Konstantinos Vamvakopoulos 6 Antonis Karyotis 1 1 Only for the chapter 6.2 of the ADR agreement Address of the Body : Papaflessa, 2, 2235 Latsia, Nicosia, Cyprus p. 4/15
Annex of the Accreditation Certificate no. IB 002-2 SCOPE OF ACCREDITATION for TUV CYPRUS LIMITED as an Inspection Body Type A for Lifting Equipment: Valid from 13 May 2017 until 12 May 2021. Field of Inspection Type of Inspection Normative Regulations / Standards / In house procedures Lifting Equipment Initial Inspection (type ΑΑ) and Periodic Inspection (type Α & Β) M.D. 15085/593 (GG 1186/8/2003) Regulation of Lifting Equipment Inspection PD 57/2010 (GG 97/Α/25.06.2010) PD 377/93 (GG 160/Α/1993) PD 18/96 (GG 12/Α/1996) PD 394/94 (GG 220/Α/94) PD 89/99 (GG 94/Α/1999) PD 70/90(GG 31/Α/90,Art.59) 1. Cranes operating near sea, such as in shipping construction and cranes for port services 2. Cranes used in steel industry or in other plants that transport dangerous products, cranes with lifting capacity equal or more than 2 tn. 3. Cranes used in steel industry or in other plants that transport dangerous products, cranes with lifting capacity less than 2 tn. 4. Bridge cranes with lifting capacity equal or more than 5 tn. 5. Bridge cranes with lifting capacity less than 5 tn. -High risk Υ1, -High risk Υ1, -DIN 15018:PART 3 -High risk Υ2, -High risk Υ1, -High risk Υ2, p. 5/15
6. Tower cranes for buildings 7. Small cranes of constructions up to 250Kg 8. Vehicle lifting platforms with vertical height of more than 4m. 9. Fixed jib cranes and fixed mast cranes with lifting capacity more than 2 tn. 10. Fixed jib cranes and fixed mast cranes with lifting capacity less than 2 tn 11. Lift machinery for which exists a risk of falling for user or other worker from a vertical height of more than 3m. 12. Lifting machinery as mobile cranes, mobile basket cranes, Cranesexcavators, Bridge cranes 13. Lifting platforms for house appliances, lifting equipment on aircrafts 14. Lifts of handicapped people in airplane, mobile elevators of work platforms -High risk Υ1, -Low risk -High risk Υ1, -High risk Υ1, -High risk Υ2, -High risk Υ2, -EN 81-40:2004 -EN 81-41:2004 -High risk Y2, -DIN 15018: PART 1,2 -DIN 15018: PART 3 -High risk Y2, -EN 81-3 -EN 81-40:2004 -EN 81-41:2004 -Low risk -DIN 15018: PART 1,2 -DIN 15018: PART 3 15. Concrete pumps -Medium risk -ELOT EN 12001 16. Fork lifts -Medium risk p. 6/15
-ISO 2331 17. Vehicles lifting platforms up to 4m 18. Cranes for collecting vehicles 19. Manually controlled lifting cranes more than 100 kg -Medium risk -Low risk -ELOT EN 13000 -Low risk -DIN 15018:PART 3 20. Stable lifting platforms -Low risk -ΕΝ 81-3 21. Hydraulic devices with scissor lifting platforms with lifting capacity more than 200kg -Low risk p. 7/15
Authorised persons to sign the certificates issued by TUV CYPRUS LIMITED are the auditor / inspector who executes the inspection of the product, and a member of the management. The list with the authorized persons to sign the certificates: LIFTING EQUIPMENT Νο. 1 st signature Νο. 2 nd signature Auditor/inspector Management 1 George Nikolaides 1 Demos Demosthenous Managing Director 2 George Tsagodimitropoulos 2 Antonis Karyotis - Technical 3 Kyriacos Kodjapashis 3 George Nikolaides Deputy Technical 4 Antonis Karyotis 4 Christos Serafeim - Deputy Technical 5 George Zevlaris 6 Christos Loizou 7 Konstantinos Vamvakopoulos 8 Michalis Parmaklis 9 Simos Kokkinis 10 Photos Mavrommatis 11 Alexios Philippou 12 Christos Serafeim Address of the Body : Papaflessa, 2, 2235 Latsia, Nicosia, Cyprus p. 8/15
Annex of the Accreditation Certificate no. IB 002-2 SCOPE OF ACCREDITATION for TUV CYPRUS LIMITED as an Inspection Body Type A for Machinery Directive: Valid from 13 May 2017 until 12 May 2021. Field of Inspection Type of Inspection Normative Regulations / Machinery or Partly completed machinery listed in ANNEX IV Category 9. Presses, including press-brakes, for the cold working of metals, with manual loading and/or unloading, whose movable working parts may have a travel exceeding 6 mm and a speed exceeding 30 mm/s.) Category 10. Injection or compression plasticsmoulding machinery with manual loading or unloading. Standards / In house procedures Machinery Directive 2006/42/EC Relevant standards as listed in the attached Official Journal of EU (2016/C 332/01) Category 11. Injection or compression rubbermoulding machinery with manual loading or unloading. Category 13. Manually loaded trucks for the collection of household refuse incorporating a compression mechanism. p. 9/15
Category 14. Removable mechanical transmission devices including their guards. Category 15. Guards for removable mechanical transmission devices. 16. Vehicle servicing lifts. Category 17. Devices for the lifting of persons or of persons and goods involving a hazard of falling from a vertical height of more than three metres. Category 18. Portable cartridge-operated fixing and other impact machinery. Category 19. Protective devices designed to detect the presence of persons. Category 20. Poweroperated interlocking movable guards designed to be used as safeguards in machinery referred to in points 9, 10 and 11.) Category 21. Logic units to ensure safety functions. ISO/IEC17020 ISO/IEC17065 Πλήρης διασφάλιση ποιότητας () ISO/IEC17020 ISO/IEC17065 Non Harmonised Standards EN 61508-1:2010 p. 10/15
Category 22. Roll-over protective structures (ROPS) Category 23. Fallingobject protective structures (FOPS). Μachinery or partly completed machinery not listed in annex IV Declaration of incorporation - voluntary verification Production quality assurance - voluntary verification, based on Assessment of conformity with checks on manufacture, according to Annex VIII Issue of Acknowledge of receipt of the technical files - voluntary verification (written in accordance to Annex VII) EN 61508-2:2010 EN 61508-3:2010 EN 61508-4:2010 EN 61508-5:2010 EN 61508-6:2010 EN 61508-7:2010 IEC 61511-1:2016 IEC 61511-2:2016 IEC 61511-3:2016 IEC TS 62443-1-1:2009 IEC 62443-2-1:2010 IEC TR 62443-2-3 :2015 IEC 62443-2-4:2015 IEC 62443-2-4 :2015/COR1:2015 IEC TR 62443-3-1 :2009 IEC 62443-3-3:2013 IEC 62443-3-3:2013/COR1:2014 Non Harmonised Standards Μη εναρμονισμένα πρότυπα EN 61508-1:2010 EN 61508-2:2010 EN 61508-3:2010 EN 61508-4:2010 EN 61508-5:2010 EN 61508-6:2010 EN 61508-7:2010 IEC 61511-1:2016 IEC 61511-2:2016 IEC 61511-3:2016 IEC TS 62443-1-1:2009 IEC 62443-2-1:2010 IEC TR 62443-2-3 :2015 IEC 62443-2-4:2015 IEC 62443-2-4 :2015/COR1:2015 IEC TR 62443-3-1 :2009 IEC 62443-3-3:2013 p. 11/15
IEC 62443-3-3:2013/COR1:2014 EN 746-1:1997+A1:2009 EN 746-2:2010 EN 746-3:1997+A1:2009 p. 12/15
Authorised persons to sign the certificates issued by TUV CYPRUS LIMITED are the auditor / inspector who executes the inspection of the product, and a member of the management. The list with the authorized persons to sign the certificates: MACHINERY DIRECTIVE Νο. 1 st signature Νο. 2 nd signature Auditor/inspector Management 1 George Nikolaides 2 Antonis Karyotis 1 Demos Demosthenous Managing Director 3 George Tsagpdimitropoulos 2 Antonis Karyotis Deputy Technical 4 Konstantinos Cheimonides 3 George Nikolaides Technical 5 Marco Ghisu 4 Sofia Andreou Deputy Quality 6 Alessio Ragni 5 Marco Ghisu Deputy Technical 7 Peter Thor Lauritzen 8 Christos Serafeim 1 Demos Demosthenous Managing Director 9 Christos Zachariades 2 George Nikolaides Technical 10 Konstantinos Vamvakopoulos 3 Marco Ghisou Deputy Technical 11 Dimitris Gournakis 4 Sofia Andreou Deputy Quality 12 Sotiris Pantos Address of the Body : Papaflessa, 2, 2235 Latsia, Nicosia, Cyprus p. 13/15
Annex Of the Accreditation Certificate no. IB 002 SCOPE OF ACCREDITATION FOR TUV CYPRUS LIMITED As an Inspection Body type A for the Directive ΑΤΕΧ 137: *Valid from 28 July 2017 until 12 May 2021 Field of Inspection Type of Inspection Normative Regulations / *Minimum requirements for improving the safety and health protection of workers potentially at risk from explosive atmospheres Classification of areas to zones regarding the creating of explosive atmosphere from gases or/and dusts. Inspection of installation and maintenance of electrical equipment in areas with explosive atmospheres Initial Periodical Sampling Continuous supervision Certification for repair, restoration and upgrading of equipment in areas with explosive atmospheres Initial Periodical Sampling Continuous supervision Standards / In house procedures Directive ΑΤΕΧ 137 1999/92/ΕC P.I. 291/2002 IECEx Guides & Rules IEC 60079-10-1: 2015 IEC 60079-10-2: 2015 IEC 60079-14: 2013/COR1 :2016 IEC 60079-17:2013 IEC 60079-19:2010/AMD1 :2015 p. 14/15
Authorized persons to sign the certificates issued buy TUV CYPRUS LIMITED, are auditors / inspector who executes the inspection, and a member of management. The list with the authorized persons to sign the certificates: Directive ΑΤΕΧ 137 Α/Α 1 st signature Α/Α 2 nd signature Auditor/Inspector Management 1 Marco Ghisu 1 Demos Demosthenous Managing Director 2 George Nikolaides 2 George Nikolaides Technical 3 Christos Zachariades 3 Antonis Kariotis - Αναπληρωτής Τεχνικός Διευθυντής 4 Konstantinos Chimonides 4 Marco Ghisu 5 George Tsagodimitropoulos 5 Sofia Andreou Deputy Quality 6 Paolo Pancaldi 7 Efstratios Komis 8 Marco Molina 9 Isabella D'Anna 10 Peter Thor Lauritzen 11 Alessio Ragni 12 Odisseas Stempiles 13 Vito Giampietro Date: 28 th July 2017 Antonis Ioannou Director CYS-CYSAB p. 15/15