UGANDA NATIONAL BUREAU OF STANDARDS (UNBS) STANDARDS DEPARTMENT STANDARDS DEVELOPMENT WORK PROGRAM January to June 2018 Proposed Title Edition Number ICS Number Standard Number Stage Stage Update Date Reference Document Final Approval Target Date Proposal Approval Status Technical Committee CHEMICALS AND CONSUMER PRODUCTS Instruments for surgery -- Scalpels with detachable blades -- Fitting dimensions 1 st 11.040.30 US ISO 7740:1985 30 2018-02-22 ISO 7740:1985 2018-06-30 Approved UNBS TC 14 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General Principals and requirements 1 st 17.120.10 US ISO 5167:1-2003 40 2017-12-15 ISO 5167-1 2018-06-30 Approved UNBS TC 16/SC 2 Toothpaste Specification 2 nd 11.060.00 US EAS 187:2017 10 2018-01-25 EAS 187:2000 2018-12-31 Approved UNBS/TC Lip shine (gloss) Specification 1 st 71.100.70 US 1933:2017 40 2017-12-19 US ISO 22716 2018-06-30 Approved UNBS/TC Lip balm Specification 1 st 71.100.70 US 1932:2017 40 2017-12-19 US EAS 377 2018-06-30 Approved UNBS/TC Aftershave Specification 1 st 71.100.70 US 1934:2017 40 2017-12-19 US EAS 377 2018-06-30 Approved UNBS/TC
Shea butter for cosmetic industry Specification 1 st 71.100.70 US 1931:2017 40 2017-12-19 US EAS 377 2018-06-30 Approved UNBS/TC Hypodermic needles for single use -- Colour coding for identification 4 th 01.070.00 US ISO 6009:2016 10 2018-01-25 ISO 6009:2016 2018-06-30 Approved UNBS TC 14 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 2: Orifice plates 1 st 17.120.10 US 5167:2-2003 40 2017-12-15 ISO 5167-2:2003(en) 2018-06-30 Approved UNBS TC 16/SC 2 Cosmetics -- Microbiology -- Enumeration and detection of aerobic mesophilic bacteria Instruments for surgery -- Scissors and shears -- General requirements and test methods 1 st 07.100.40 US ISO 21149:2017 1 st 11.040.30 US ISO 7741:1986 30 2018-03-01 ISO 21149:2017, 2018-06-30 Approved UNBS/TC 10 2018-01-25 ISO 7741:1986 2018-06-30 Approved UNBS TC 14 Dentistry -- Sterile injection needles for single use 1 st 11.040.25, 11.060.20 US ISO 7885:2010 30 2018-02-22 ISO 7885:2010 2018-06-30 Approved UNBS TC 14 Non-active surgical implants -- General requirements Long Lasting insecticide treated mosquito nets - Specification 1 st 11.040.40 US ISO 14630 10 2018-01-25 ISO 14630:2012 2018-06-30 Approved UNBS TC 14 4 th 01.040.59 US 307:2018 30 2018-02-01 US 307:2014 2018-06-30 Approved UNBS TC 7/SC 1 ISO 8669-1;1988- Urine collection bags -part 1- vocabulary Urine collection bags Part 2: Requirements and test 1 st 01.040.11 US ISO 8669-1;1988 1 st 01.040.11 US ISO 8669-2:1996 20 2018-02-01 ISO 8669-1;1988-2018-06-30 Approved UNBS TC 14 20 2018-02-01 ISO 8669-2:1996 2018-06-30 Approved UNBS TC 14
methods Metallic materials -- Vickers hardness test -- Part 1: Test method Single-use containers for human venous blood specimen collection 1 st 77.040.10 US ISO 6507-1:2018 1 st 11.040.20 US ISO 6710:2017 20 2018-02-01 ISO 6507-1:2018 2018-06-30 Approved UNBS TC 14 20 2018-02-06 ISO 6710:2017 2018-06-30 Approved UNBS TC 14 Standard Specification for Wrought Stainless Steels for Surgical Instruments Standard Test Method for Penetration Testing of Needles Used in Surgical Sutures 1 st 11.040.30 US 1960;2018 20 2018-01-25 ASTM F899-12b 2018-06-30 Approved UNBS TC 14 1 st 11.040.30 US 1961:2018 20 2018-01-25 ASTM F3014-14 2018-06-30 Approved UNBS TC 14 Standard Test Method for Bend Testing of Needles Used in Surgical Sutures 1 st 11.040.30 US 1962:2018 20 2018-01-25 ASTM F1874-98(2011 2018-06-30 Approved UNBS TC 14 use - Method of assay 1 st 71.100.01 US ISO 979 10 2018-01-30 ISO 979 2018-06-01 Approved UNBS/TC Surgical and dental hand instruments -- Determination of resistance against autoclaving, corrosion and thermal exposure 1 st 11.040.30 US ISO 13402:1995 20 2018-02-01 ISO 13402:1995 2018-06-30 Approved UNBS TC 14 Surgical sutures Specification Part 2: Non absorbable 1 st 11.040.30 US 1958-2:2018 30 2018-02-22 British Pharmacopoeia, 2015,USP 29-NF24 2018-06-30 Approved UNBS TC 14 Implants for surgery Metallic materials Part 1: Wrought 1 st 11.040.40 US ISO 5832-1:2016 30 2018-02-22 ISO 5832-1:2016, 2018-06-30 Approved UNBS TC 14
stainless steel Caustic Soda (Sodium Hydroxide) Specification Standard test method for chemical analysis of caustic soda and caustic posh (sodium hydroxide and potassium hdroxide) 1 st 71.100.01 US 1963:2018 10 2018-01-25 IS: 252 1991: 2018-06-30 Approved UNBS/TC 1 st 71.100.35 US 1964:2018 10 2018-01-25 ASTM E291-09: 2018-06-30 Approved UNBS/TC Surgical suture needles Specification 1 st 11.040.30 US 1959:2018 20 2018-01-25 IS 9165 (Part 1): 1992, 2018-06-30 Approved UNBS TC 14 use - Determination of chloride content - Mercurimetric method use -- Determination of carbonates content -- Titrimetric method use Sampling Test Sample Preparation of the main solution for carrying out certain determinations 1 st 71.100.01 US ISO 981 10 2018-01-30 ISO 981 2018-06-30 Approved UNBS/TC 1 st 71.100.01 US ISO 3196 10 2018-01-30 ISO 3196 2018-06-30 Approved UNBS/TC 1 st 71.100.01 US ISO 3195 10 2018-01-30 ISO 3195 2018-06-30 Approved UNBS/TC use Determination of copper content use Determination of silica content 1 st 71.100.01 US 1965 10 2018-02-02 BS 6075: Part 12: 1981 1 st 71.100.01 US 1966 10 2018-02-02 BS 6075: Part 4: 1981 2018-06-30 Approved UNBS/TC 2018-06-30 Approved UNBS/TC
Surgical sutures Specification Part 1: Absorbable ENGINEERING 1 st 11.040.30 US 1958-1:2018 30 2018-02-19 British Pharmacopoeia, 2015, published by The Stationery Office on behalf of the Medicines and Healthcare Products Regulatory Agency,US Pharmacopoeia 29- NF24, General Toxicity and Medical Device Biocompatibility (GTMDB 05) 2018-06-30 Approved UNBS TC 14 Security techniques - Code of practice for information security management 1 st 03.100.70 US ISO/IEC 27002:2013/Co r 1:2014 27002:2013/Cor 1:2014 2018-06-30 Approved UNBS TC 8 Corporate governance of information technology 2 nd 35.020 US ISO IEC 38500:2012 40 2018-01-03 US ISO IEC 38500:2012 Security techniques - IT network security - Part 5: Securing communications across networks using virtual private networks 1 st 35.030 US ISO IEC 18028-5: 2006 40 2018-01-03 US ISO IEC 18028-5: 2006
Steel filling cabinets for general office purposes-specification 1 st 97.149 US 1908 20 2017-12-18 Is 3313:2005 2018-06-30 Approved UNBS TC 12-80 mm (1,46Gbytes per side) and 120 mm (4,70 Gbytes per side) DVD Recordable Disk (DVD-R) 1 st 35.220.30 US ISO/IEC 23912:2005 23912:2005 Security techniques - Information security management systems - Requirements 1 st 03.100.70 US ISO/IEC 27001:2013/Co r 2:2015 27001:2013/Cor 2:2015 Security techniques - IT network security - Part 3: Securing 1 st 35.030 US ISO/IEC 18028-3:2005 18028-3:2005 Security techniques - IT network security - Part 4: Securing remote access 1 st 35.030 US ISO IEC 18028-4: 2005 40 2018-01-03 US ISO IEC 18028-4: 2005 Security techniques - Selection, deployment and operations of intrusion detection systems 1 st 35.030 US ISO/IEC 18043:2006 18043:2006 Security techniques - Information security incident management 1 st 35.030 US ISO IEC 27035: 2011 40 2018-01-03 US ISO IEC 27035: 2011 Corporate governance of information technology - 3 rd 03.100.70 US ISO/IEC 27006:2015 10 2017-12-12 ISO/IEC 27006:2015
Security techniques - Requirements for bodies providing audit and certification of information security management system Security techniques - Measurement 2 nd 03.100.70 US ISO/IEC 27004:2016 27004:2016 IASME: Information Assurance for Small and Medium Sized Enterprises 1 st US 1956 10 2017-12-12 DUS 1956 Ergonomics of human--system interaction -- Part 400: Principles and requirements for physical input devices 1 st 35.180 US ISO/ 9241-400:2007 40 2018-01-03 ISO/ 9241-400:2007 Information technology Office equipment Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components 2 nd 37.100.10 US ISO/IEC 19752:2017 19752:2017 - Security techniques -- Code of practice for personally identifiable information protection 1 st 35.030 US ISO/IEC 29151:2017 29151:2017 Information technology Office equipment Method for measuring digital printing 2 nd 37.100.10 US ISO/IEC 24734:2014 24734:2014
productivity Geographic information -- Rules for application schema 2 nd 35.240.70 US ISO 19109:2015 40 2017-12-19 ISO 19109:2015 Security techniques - Information security management system implementation guidance 2 nd 03.100.70 US ISO/IEC 27003:2017 27003:2017 Road vehicles Masses Vocabulary and codes 1 st 43.020 US ISO 1176 40 2018-01-08 ISO 1176 2018-06-30 Approved UNBS TC 8 Pneumatic tubes for automotive vehicles Technical requirements and test methods 1 st 83.160.01 US ISO/IEC 17464 40 2018-01-08 ISO 17464 2018-06-30 Approved UNBS TC 8 Road vehicles Types Terms and definitions 1 st 43.020 US ISO 3833 40 2018-01-08 ISO 3833. 2018-06-30 Approved UNBS TC 8 Motorcycle rubber inner tubes Specifications 1 st US 1855 40 2018-01-08 US ISO 4249-1:1985 2018-06-30 Approved UNBS TC 8 Road vehicles Bus body construction Specification Petroleum Industry above ground storage tanks of petroleum products Part 2: siting, design and construction of large consumer Installations and Handling of petroleum 1 st US 1928 20 2018-01-08 US ISO 3833. 2018-06-30 Approved UNBS TC 8 1 st 23.020.10 US 947-2 40 2018-01-08 API 650, API 620 2018-06-30 Approved UNBS TC 16
products and their derivatives Dining table Specification 1 st 97.140 US 1904 30 2017-12-21 IS 5823 June 2018 Approved UNBS TC 12 FOOD AND AGRICULTURE Robusta green coffee beans specification 1 st 67.140.20 US 1957 20 2018-02-14 EAS 130 2018-06-30 Approved UNBS TC 2/SC 17 Roasted and ground robusta coffee Specification 2 nd 67.140.20 US ISO/IEC 29151:2017: 10 2017-12-18 EAS 105 2018-06-30 Approved UNBS TC 2/SC 17 Nut/vegetable spread specification 1 st 67.200.20 US 1953 10 2018-01-10 Commercial item description nut butters and nut spreads by U.S. department of agriculture (USDA) 2018-06-30 Approved UNBS TC 2/SC 2 MANAGEMENT AND SERVICES DUS 1935 Standard Terminology for Waste and Waste Management Standard Practices for Parasailing Standard Guide for Quality Assurance in Translation 1 st 13.030.01 US 1935 10 2017-12-08 D5681 June 2018 Approved UNBS TC 10 1 st 97.20.40 US 1953 10 2017-12-08 F3099-17 June 2018 Approved UNBS TC 10 1 st 03.080.20 US 1952 10 2017-12-08 ASTM F2575-14 June 2018 Approved UNBS TC 10
Standard Guide for Use- Oriented Foreign Language Instruction Standard Guide for Sampling Waste Piles Standard Guide for General Planning of Waste Sampling Standard Practice for Language Interpreting 1 st 03.180 US 1951 10 2017-12-08 ASTM F1562-14 June 2018 Approved UNBS TC 10 1 st 13.030.01 US 1936 10 2017-12-08 D6009-12 June 2018 Approved UNBS TC 10 1 st 13.030.01 US 1937 10 2017-12-08 D4687-14 June 2018 Approved UNBS TC 10 1 st 01.140.10 US 1950 10 2017-12-08 ASTM F2089-15 June 2018 Approved UNBS TC 10 Animal welfare management General requirements and guidance for organizations in the food supply chain. 1 st 67.020 ISO/TS 34700:2016(en 10 2017-12-08 ISO/TS 34700:2016(en) June 2018 Approved UNBS TC 10 Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design 1 st 13.030.01 US 1938 10 2017-12-08 D6311-98(2014) June 2018 Approved UNBS TC 10
Key: Technical Committee (TC) Name TC Code Name Code FOOD AND AGRICULTURE UNBS TC 2 New Work Item Proposal (PNWI) 0 BUILDING AND CONSTRUCTION UNBS TC 3 Approved (NWI) 10 MECHANICAL ENGINEERING AND METALLURGY UNBS/TC 4 Working Draft (WD) 20 CHEMICALS AND ENVIRONMENT UNBS TC 5 Committee Draft (CD) 30 ELECTROTECHNOLOGY UNBS TC 6 Draft Uganda Standard (DUS) 40 TEXTILES, LEATHER, PAPER AND RELATED PRODUCTS UNBS TC 7 Final Draft Uganda Standard (FDUS) 50 TRANSPORT AND COMMUNICATION UNBS TC 8 Uganda Standard (US) 60 METROLOGY UNBS TC 9 MANAGEMENT AND SERVICES UNBS TC 10 CONSUMER PRODUCTS UNBS TC 11 FURNITURE UNBS TC 12 ENERGY MANAGEMENT UNBS TC 13 MEDICAL DEVICES UNBS TC 14 HALAL INTEGRITY UNBS TC15 PETROLEUM AND PETROLEUM PRODUCTS UNBS TC 16 OFFICIAL STATISTICS UNBS TC 17 INFORMATION TECHNOLOGY UNBS TC 18 PACKAGING AND PACKAGING PRODUCTS UNBS TC 19 TIMBER UNBS TC 20