Europe / Africa PRODUCT NUMBER: 1785018 Rd40 Aluminium Canister AXP3 The AXP3 canister is part of the broad choice of canisters offered to protect against many hazardous gases, vapors and/or particulates in many applications. The Honeywell range provides high quality and a cost-effective protection. The canisters of RD40 Honeywell range are tested against the European standards EN14387 and EN148 and/or EN143. Overview Reference Number 1785018 Product Type Respiratory Protection Range Reusable APR Brand Honeywell Brand formerly known as FERNEZ by Willson Industry Industry Product Use For use with full-face mask equipped with an Rd40 connector For protection against organic gases and vapours with a boiling point below 65 C, solid and liquid particles. s & Benefits Aluminium casing allows easy detection of damages caused by external shocks providing extra safety. Performance requirements for gas and particles significantly above standard for excellent filtration efficiency over extensive period of time. Canister made of high-grade charcoal, additionally treated for an optimal gas absorption. Specific canister structure for low breathing resistance and more comfort for the user. Low profile so as not to obstruct the field of vision Page 1 Of 3 Honeywell International Inc.
Aluminium Specific Filter 450 AX P3-1785018 Individually packed. Technical Description Filters Cartridges Standard - RD40 connection in compliance with the EN148 - Particle filters efficiency (EN143) - EN14387 (Gas/vapours and combined filters for respiratory with negative pressure)- Conformed to the requirements of the European Community Directive 89/686/EEC (Personnal Protective Equipment), belongs to the EC Category III and is CE marked, followed by the identification of the certification body (0194), which assure the quality control (according to the article 11B). Protection Type Combination Connection Type RD40 Protection Level P3 Class 3 Material Special aluminium alloy with PE cover High activated charcoal 106mm Certifications E.C. Declaration of Conformity EC Category PPE 3 Quality Assurance ISO 9001 / 2000 EC Certificate Number 0070-003-079-06-96-0118 Ext. 01-02-00 EC Attestation EC Attestation EC Attestation Number 0070-003-079-06-96-0118 Ext. 01-02-00 Declaration of conformity INRS - 1785018 http://www.honeywellsafety.com/supplementary/documents_and_downloads/secured/pic_sku_- _certificates/4294989390/1033.aspx Literature & Documents 1785018 AXP3 tested substances http://www.honeywellsafety.com/supplementary/documents_and_downloads/respiratory_protection /reusable_respirators/4294974289/1033.aspx Additional Information User Manual User Manual Filters Maintenance Page 2 Of 3 Honeywell International Inc.
Life Cycle Depends on absorption capacity, concentration of contaminant and user breathing Storage Information 4 years after date of manufacturing - Store the filters in a cool, dry, location with the caps attached - The maximum permissible storage period is specified on the filter - Storage temperature range: -20 C / +50 C - Maximum humidity during storage: 80% Care Instructions Controls before use Users must Ensure that the level of protection offered by the respirator is sufficient for the type and concentration of contaminant(s) in the work area Respect the shelf life figuring on the filter Check the seal points Limitations of use Aluminium Specific Filter 450 AX P3-1785018 Limitations of use For use only by trained and qualified personal Do not use where the oxygen level or the atmosphere is less than 17% If a user identifies the break through of the canister by the smell or taste of a gas, the canister must be replaced immediately If the breathing resistance of the canister increased significantly, it must be changed. Particular cautions have to be taken in Atex environments Filter with a mass over 300 g may not be used fitted directly onto half-masks AX and AXP3 canister are single use only. They must be replaced after each shift. Disposal Canister must be disposed in accordance with the local waste disposal regulations Packaging EAN Code 7312557850186 Packaging Specs Individual Box 18 x 10 x 10 Packaging Specs Stocker Box 59 x 23 x 23 Unit of Measure CM Quantity per Box/Pack/Case 1 unit of 380 gr Quantity per Carton 50 units for a gross weight 19 kg Honeywell International Inc. Page 3 Of 3 Honeywell International Inc.
E.C. Declaration of Conformity The manufacturer or its legal representative supplier in the European Community: Honeywell Safety Products Europe Declares that the Personal Protective Equipment described here after conforms to the provisions of the European Council Directive 89/686/CEE: Designation: Rd40 Aluminium Canister AXP3 Reference: 1785018 Standard(s): EN371 This PPE is the object of the below EC examination certificate n : 0070-003-079-06-96-0118 Ext. 01-02-00 Delivered by: INRS Avenue de Bourgogne BP 27 54501 Vandoeuvre Cedex France Drawn up in Villers-Cotterêts, on the 02/05/2016 By: Eric PUILLE Division: Respiratory Protection Zl Paris Nord II 33, rue des Vanesses BP 50288 95958 Roissy CDG France Tel: +33 (0) 49 90 79 79 Fax: +33 (0)1 49 90 79 80 www.honeywellsafety.com
Part # Number 1785018 Rd40 Aluminium Canister AXP3 Gases Tested Conditions and results - Methoxymethane C2H6O 50 min. - Isobutane C4H10 50 min. - The concentration of the test gas is 0.05% vol. for methoxymethane and 0.25% vol. for isobutane - The tested air flow is 30 litres per minute - Minimum duration required before "breakthrough" : Aerosols tested Conditions and results * Paraffin oil for liquid particulates - The tested air flow is 95 litres per minute * Sodium chloride for solid particulates - The aerosol penetration for the test must be less than : *0.05% for sodium chloride * 0.05% for paraffin oil - Breathing resistance less than: * 2.2 mbar at 30 l/min * 8.2 mbar at 95l/min.