LICENCE. to use the European Mark

Similar documents
LICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 01 Wien,

LICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 01 Wien,

LICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 02 Wien,

LICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 01 Wien,

LICENCE. to use the European Mark

LICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 02 Wien,

LICENCE. to use the European Mark

LICENCE. to use the European Mark

LICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 03 Wien,

to use the European Mark Licence No Date of issue: Wien, Rev. No. 02 Wien,

LICENCE. to use the European Mark

LICENCE. to use the European Mark

LICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 01 Wien,

LICENCE. to use the European Mark

LICENCE. to use the European Mark

LICENCE. to use the European Mark

CERTIFICATE. für die überwachte Fertigungsstätte for the approved factory. Bisol Proizvodnja d.o.o Latkova vas 59a 3312 Prebold Slovenia

Battery supplied electronic ballast for emergency lighting EATON, EATON CROMPTON, EATON JSB or EATON MENVIER

European Technical Assessment. ETA-12/0208 of 26 May English translation prepared by DIBt - Original version in German language.

Regulation on the handling of explosives precursors

In accordance with the Radio Waves Act Chapter 58 Article 8(3), the document below is a

Consumer Protection: Standardized International Product Labels: 2. Scope of Labelling

European Technical Assessment. ETA-18/0213 of 17 May English translation prepared by DIBt - Original version in German language.

DEPARTMENT OF TRADE AND INDUSTRY DEPARTEMENT VAN HANDEL EN NYWERHEID. NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (Act 5 of 2008)

RULEBOOK ON ELECTROMAGNETIC COMPATIBILITY

1. Which national directives/laws control the placing on the market of equipment for explosive atmospheres?

DECLARATION OF PERFORMANCE. No EN

EN ISO Welding coordination Tasks and responsibilities. Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006)

Overview of standardization and mandatory technical regulation systems of Turkmenistan. (gas and electricity)

This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation

The product and any acceptable variation thereto is specified in the Annex to this certificate and the documents therein referred to.

DECLARATION OF PERFORMANCE. No EN

EN ISO ÖNORM. Edition: (ISO 14937:2009)

DECLARATION OF PERFORMANCE. DoP: 0094 for Injection System fischer FIS V (Bonded anchor for use in concrete) EN

Integration of safety and security for effective control and protection of radioactive sources

European Technical Assessment. ETA-15/0435 of 7 August English translation prepared by DIBt - Original version in German language.

Stanley Black & Decker Deutschland GmbH Richard-Klinger-Straße Idstein DEUTSCHLAND. Manufacturing plant Manufacturing Plant 4 and Plant 9

DECLARATION OF PERFORMANCE. No EN

Solar Keymark in Europe. DI (FH) Gundula Tschernigg AIT Austrian Institute of Technology

European Technical Assessment. ETA-17/0624 of 8 September English translation prepared by DIBt - Original version in German language

ISO INTERNATIONAL STANDARD

European Technical Assessment. ETA-05/0069 of 3 July English translation prepared by DIBt - Original version in German language.

European Technical Assessment. ETA-16/0515 of 14 December English translation prepared by DIBt - Original version in German language

Trade name of the construction product Fix Master Injection system FIT-Ve 200 or FIT-Wi 200 for concrete. Karhutie 9 Fl NURMIJÄRVI FINNLAND

European Technical Assessment. ETA-15/0435 of 21 December English translation prepared by DIBt - Original version in German language

The Use of Public Address System to Improve Tunnel Safety - Current Practices. Lim Hock Tay

Contents. EN :2012 (E) Issue 5 ( ) Page

DECLARATION OF PERFORMANCE. No EN

(1135/2016) Translation from Finnish Legally binding only in Finnish and Swedish Ministry of Economic Affairs and Employment, Finland

CENELEC GUIDE 25. Guide on the use of standards for the implementation of the EMC Directive to apparatus. Edition 3,

This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation

European Technical Assessment. ETA-13/0652 of 17 March English translation prepared by DIBt - Original version in German language.

DECLARATION OF PERFORMANCE. No EN. Post-installed fastening in cracked or uncracked concrete, see appendix, especially Annexes B 1 to B 6

European Technical Assessment. ETA-11/0360 of 6 October English translation prepared by DIBt - Original version in German language.

Sýnishorn Power installations exceeding 1 kv a.c. - Part 1: Common rules

Record of Amendments. Version Date Amendment Section/page affected

ISO INTERNATIONAL STANDARD

EC-Type Examination (Module B) Certificate. A.1/3.11 b "B" dass divisions, fire integrity

rebar connection Fosroc International Limited Drayton Manor Business Park Coles Road TAMWORTH STAFFORDSHIRE; B78 3XN GROSSBRITANNIEN

DECLARATION OF PERFORMANCE. No EN

English Version. This Technical Report was approved by CEN on 11 December It has been drawn up by the Technical Committee CEN/TC 135.

Report VNLF Test Report

Fire classification of construction products and building elements

European Technical Assessment. ETA-07/0219 of 19 September English translation prepared by DIBt - Original version in German language

English translation prepared by DIBt - Original version in German language. Nails

Guidelines Cooperation between authorities under Articles 17 and 23 of Regulation (EU) No 909/2014

1. Terms defined in the Construction Products Regulation (CPR)

DECLARATION OF PERFORMANCE. DoP: 0124 for fischer Ceiling Anchor FDZ (Metal anchors for use in concrete (light-duty type)) EN

Coatings for protection of FRP structures with heavy rain erosion loads

SOUTH AFRICAN NATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements

The European Standardization System. Diana Dus Programme Manager International Cooperation

SAR Technical Requirement

Shipboard incinerators with capacities up to 4000 kw

Guidance from the Group of Notified Bodies for the Construction Products Regulation 305/2011/EU

European Technical Assessment. ETA-10/0352 of 6 July English translation prepared by DIBt - Original version in German language.

safety requirements are to comply with this compulsory specification twelve (12) months after the publication of this notice.

Record of Amendments. Version Date Amendment Section/page affected

European Technical ETA-10/0305 Assessment of 6 December 2017 General Part

ILNAS-EN 50304:2001. Electric ovens for household use - Methods for measuring the energy consumption

DECLARATION OF PERFORMANCE. No EN. Post-installed fastening in cracked or uncracked concrete, see appendix, especially Annexes B 1 to B 9

HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY PART 2-13: PARTICULAR REQUIREMENTS FOR DEEP FAT FRYERS, FRYING PANS AND SIMILAR

Report VNNF Test Report

DECLARATION OF PERFORMANCE. No EN. Annexes B 1 to B 4

Official Journal of the European Union. (Non-legislative acts) REGULATIONS

Trade name of the construction product Injection system Hilti HIT-HY 110. This version replaces ETA-13/1037 issued on 17 January 2014

BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY

GNB-CPR Position Paper: Issuance of certificates under CPR

DECLARATION OF PERFORMANCE. No EN. Post-installed fastening in cracked or uncracked concrete, see appendix, especially Annexes B 1 to B 4

This document is a preview generated by EVS

European Technical Assessment. ETA-14/0125 of 26 May General Part. Technical Assessment Body issuing the European Technical Assessment:

DECLARATION OF PERFORMANCE

Trade name of the construction product Würth concrete screw W-BS 5 and W-BS 6. This version replaces ETA-16/0128 issued on 10 May 2016

Classification Report Reaction to fire of building elements DIN EN :2007. Class E

Sýnishorn Safety of machinery - Permanent means of access to machinesry - Part 3: Stairs, stepladders and guard-rails

ISO INTERNATIONAL STANDARD. Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials

BUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY

DECLARATION OF PERFORMANCE. DoP: 0135 for fischer injection system FIS EM Plus (Bonded anchor for use in concrete) EN

DECLARATION OF PERFORMANCE. No EN

CENELEC Guide n 25 Guide on the use of Standards for the implementation of the EMC Directive

Transcription:

OVE Austrian Electrotechnical Association Eschenbachgasse 9, 1010 Wien, Austria ZVR: 327279890 DVR: 1055887 www.ove.at OVE Testing & Certification Kahlenberger Str. 2A, 1190 Wien, Austria T +43 1 370 58 06 F +43 1 370 58 06-199 ENEC Certification Body registered under ID # 11. Validity of ENEC Licences can be checked at www.enec.com LICENCE to use the European Mark Licence No. 84894-002 Date of issue: OVE the Austrian Electrotechnical Association as signatory to the "Agreement on the use of a commonly agreed Mark of Conformity for certain electrical equipment complying with European Standards" hereby grants the right to label the products mentioned hereunder and listed in the Annex with the Mark(s) shown above to the following company Licenceholder: AgiLight, Inc. 1074 Arion Circle, Suite 116 78216 San Antonio, TX United States of America Product: Trade Mark: Series/Type: LED module AGILIGHT TRIDONIC LED P561 Basis for this given right is the conformity of the products with the requirements of the relevant Standard(s) as listed in the Annex and the fulfilment of articles 8 and 9 of the ENEC-Agreement by the manufacturer. This licence refers to the tested specimen and to all products manufactured strictly identical to the submitted one. This licence has been issued under the presumption and conditional on the fact that the licensee holds all necessary legal rights with regard to the product presented for testing and certification. Österreichischer Verband für Elektrotechnik Head of Testing & Certification Dipl.-Ing. W. Martin OVE Testing & Certification Accredited by the Federal Ministry of Science, Research and Economy as Certification Body for products within the scope as given in the official decree and published under www.en.bmwfw.gv.at/accreditation

Page 2 of 5 Hersteller Manufacturer Fertigungsstätte(n) Factory location(s) AgiLight, Inc. 1074 Arion Circle, Suite 116 78216 San Antonio, TX United States of America TNS SERVIS s.r.o. K Teplinám 619 763 15 Slušovice Czech Republic Typenbezeichnung Type reference LED P561 G1, see page 4. Prüfbericht Test Report Nationale Bestimmung(en) National Standard(s) Europanorm(en) European Standard(s) TGM-VA EE 36988 ECS ÖVE/ÖNORM EN 62031:2015-10-01 EN 62031:2008 + A1:2013 + A2:2015 Ersatz für Zertifikat Superseded licence 7590-146 dated 2015 03 17 Anmerkung(en) Remark(s) Tested and found within limits of RG0 (exempt group) according to EN 62471:2008.

Page 3 of 5 Nennspannung Rated voltage Nennleistung Rated power Zulässige Arbeitsspannung Working voltage for insulation Max. Betriebstemperatur tc Rated max. operating temperature tc Umgebungstemperatur ta Rated ambient temperature ta Anschlußart Method of connection Beschreibung des Aufbaus Description of construction DC 12 V 1,48 W per module 50 V 65 C -40 to +60 C Connecting leads LED chain with built-in LED modules, constant voltage type.

Page 4 of 5 Bauteil Code Hersteller Typenbezeichnung Konformitätszeichen Component Code Manufacturer Type Reference Mark(s) of conformity LED C Nichia NFSW757DT-V1 NFSL757DT-V1 Checked within appliance A B C D The component is replaceable with another one, also certified, with equivalent characteristics. The component is replaceable if authorised by the test house. Integrated component tested together with the appliance. Alternative component.

Typecode: Licence No. 84894-002 Page 5 of 5 LED P561 G1 Alphanumeric code indicating LED colour NW... Neutral white (4000K) WW... Warm white (3000K) DL... Daylight white (6500K) Series