SHEET 1 of 5 DESIGN HIGHLIGHTS Near silent motor system Modular format ensures simple installation Range of standard sizes Sized to suit options available UP HINGE DOWN HINGE ND SWIVEL DOWN FUNCTION The CHS mechanism hinges a flat screen television from a ceiling through 90 degrees and then can swivel up to 180 degrees in either direction. SUITILITY Learnable left and right limits and then 3 set positions available OPTIONS Telescope version with non swivel - CHT 4, 5 & 6 Non swivel versions are available in 4 standard sizes - CH3, 4, 5 & 6 Marine suitable option with IP rated outdoor options with the M-CH3,4,5 and 6 ny RL colour available ang & Olufsen / Loewe mount option Satin white aluminium box The CHS5 is one of four standard sizes available at present. See CHS3, 4 & 6 for smaller and larger mechanisms. SPECIFYING The CHS5 takes a maximum screen size of 1310 [51.5"] x 780 [30.7"] x 140mm [5.5"] deep. Maximum weight of 50Kg [110lb]. Screens with standard bolt fixings on the back can be fitted. See Sheet 5. CONTROL Mount rackets for top or side mounting Supplied with basic infrared remote. Can be learnt by many learning remote lso has contact closure and RS232 so can be operated by switches, Crestron, MX or Lutron systems. Screen panel fills the opening in the ceiling WRNING It is the responsibility of the installer to warn all potential end users of the dangers of interfering with mechanisms during operation IMPORTNT Mechanisms which lift or move weights need to be checked on a yearly basis for any damage which may result in an accident
SHEET 2 of 5 FITTING NOTES Stage 1 Prior to installation the plasterboard can be in place with wooden beams spaced to take the mechanism. These Mount rackets are then installed first. Mount rackets Timber eams Plasterboard Ceiling The Future utomation Ceiling Hinge has some great features to make installation as simple and quick as possible. Stage 2 The mechanism motor assembly can be lifted into position by three people. The mechanism expands outwards to locate within the Mount rackets. ox Stage 3 Signal cables can be run before the ox, screen and screen panel can be fitted in place. Screen Panel
SHEET 3 of 5 SIDE MOUNTING Side Section 47.8 1215 Pivot Point Viewing Side 0.8 20 45.3 1150 1.6 40 0.6 15 Maximum Ceiling Thickness Timber eam Front View Section 61.8 1570 5 Timber eam 8.4 213 3.9 100 53.9 1370 3.9 100 Mechanism just fixes to these timber beams at the sides Mechanism weight is 120Kg See CD drawings for more dimensional information
SHEET 4 of 5 TOP MOUNTING 0 1.0 25 Plan View 60.8 1545 61.8 1570 Side Section 2.0 50 0 0.6 14 Suitable for M12 Studs One option is to hang the mechanism from a concrete floor before the ceiling panels are finished around. Holes are provided for four M12 studs/bolts. If the ceiling panels have the opening size shown then all mechanism parts will be removable and serviceable without removing the ceiling. The screen panel would be removed first followed by the box and the whole motor unit. 45.3 1150 35.4 900 42.5 1080 Viewing Side Front View Section 8.4 213 53.9 1370
SHEET 5 of 5 View Up Without Ceiling Panels Side View Down ox Flange 46.1 1172 Screen Panel Size 43.0 1091 90 0.8 20 52.2 1325 Screen signal cables exit from here on the right side of the mechanism from the pivot tube. 36.3 923 Screen Panel 55.3 1405 IMPORTNT NOTE! There is only 20mm clearance between the screen panel and the ceiling when the mechanism rotates. No ceiling panels can be added below the box flange. control box 220 x 55 x 150mm [8.7 x 2.1 x 5.9"] needs to placed in an accessible location. It is supplied on a 3 metre [9ft 11"] flying lead. 16.5 420 8.2 209 It requires a 3 amp mains supply. Infrared RS232 and contact closure inputs need to be made to this box. The slotted screen mount will accommodate any screen with a bolt pattern up to 680mm [26.8] wide by 420mm [16.5] high. 26.8 680 MX