Performance Aire offers three VAV comfort solution packages.

Similar documents
Engineering Guide VAV Diffusers. Please refer to the Price Engineer s HVAC Handbook for more information on VAV Diffusers.

Improved Thermal Comfort & Energy Efficiency with low-pressure VAV diffusion design

45 Commerce Ave., Unit #2 South Burlington, VT tel: fax:

Guide Spec Summary. Option List. Date: 05/21/2001. EarthWise VAV Terminal Units Full Spec. Prepared by: Phone Number: Prepared for:

THERMA FUSER SIDEWALL LINEAR VAV DIFFUSER

Air Conditioning Clinic

FAN TERMINAL UNITS Constant Volume (Series Flow), Standard Design

LYRA » ENERGY EFFICIENT CASSETTE CHILLED BEAM AIR DIFFUSION LYRA

HVAC DISTRIBUTION and DELIVERY SYSTEMS

HAP e-help. Modeling Induction Beams in HAP v4.8 QB TIP 001

Advanced Air. Hard Wired Damper Control Panels. Systems 10, 11, & 12. Hard-Wired Systems. Bespoke Systems Available. Value Engineered Solutions

Zoning System Design Manual

Linear Floor Heaters

UNIVERSITY OF MISSOURI Heating Ventilating and Air-Conditioning (HVAC) 2016 Q1

MB Therma-Fuser Standalone Motorized Disc VAV Diffuser

APPLICATION GUIDE BEAMS

Therma-Fuser Square Thermally Powered VAV Diffuser

AIR-CONDITIONING SYSTEMS AND APPLICATIONS. Abdullah Nuhait Ph D. King Saud University

TLW Therma-Fuser Linear Sidewall Thermally Powered VAV Diffuser

DESIGNING MODULAR VAV SYSTEMS

Displacement Ventilation

Inffusers. idl20 (2 WAY) ids60 (4 WAY)

INTRODUCTION HVAC BASICS AND HVAC SYSTEM EFFICIENCY IMPROVEMENT SECTION O 4/19/2012

MBS Therma-Fuser Standalone Motorized Swirl VAV Diffuser

Selected Laboratory Energy Efficiency Measures

SECTION SEQUENCE OF OPERATION FOR HVAC CONTROLS PART 1 GENERAL

Grilles & Diffusers - Metal

Appendix 13. Categories of Cooling and Heating systems

Zoned Rooftop Systems. Light commercial packaged rooftop systems from Trane

Temperature Control and Zoning of UFAD Systems

control sequences model QST / EST Series Table 47: QST / EST Analog Electronic Control Strategies Fan Powered Air Terminals

UFAD and Displacement Ventilation. Dan Int-Hout, FASHRAE Chief Engineer Krueger Richardson, Texas

BES-TECH TECHNOLOGY & SYSTEM INTEGRATION

OSU Alumni Center Phase I Implementation Review. Oregon State University 130 Oak Creek Bldg. Corvallis, Oregon

SECTION SPECIFICATION FOR HI-VELOCITY FAN COIL SYSTEMS

IDL20e (2 way discharge) IDS60e (4 way discharge) Inffusers. UDI (vertical discharge) Frequently Asked Questions

photo by PFC Price Fan Column

SEQUENCE OF OPERATION GUIDELINE. AIR TERMINAL UNITS SINGLE DUCT VARIABLE AIR VOLUME with HOT WATER REHEAT or ELECTRIC HEAT

Making UFAD Systems Work BY STEVEN T. TAYLOR, P.E., FELLOW ASHRAE

Square Ceiling Diffusers : All extruded aluminum constructions. Opposed blade damper is adjustable from face of diffuser. Available in square and

VAV CHILLED BEAMS Pi FUNCTION DESIGN GUIDE

INSTALLATION, BALANCING & MAINTENANCE

b.) Technical Information:

DESCRIPTION OF TECHNOLOGY

Product Data. Features/Benefits. 33CS Carrier Comfort System Variable Volume and Temperature (VVT )

CLN 3 ATTRACTIVE JOINABLE LINEAR PROFILE UP TO 8 SLOT TRACKS AVAILABLE HEATING AND COOLING TERMINAL REHEAT AVAILABLE

Halton Vario Design Guide

Job Name Control Systems Description Date

8. Air Distribution Systems

EASY VOLUME ADJUSTMENT INCLUDED FLEX CLAMP EXCELLENT THROW & FLOW HEATING AND COOLING TERMINAL REHEAT AVAILABLE

Civil Engineering Building

HVAC Design Overview of Variable Air Volume Systems

The swirl comfort unit is a compact air-conditioning unit providing swirl jet air supply.

SECTION AIR DUCT ACCESSORIES

Computing Services Center

UNIVERSITY OF ALASKA FAIRBANKS DIVISION 25- INTEGRATED AUTOMATION DESIGN STANDARDS SECTION INTEGRATED CONTROL OF FACILITY LAB FUME HOODS

Florida Department of Transportation

Installation and Maintenance Manual IM 1102

Bypass Terminal Units. DUCT VENTILATION AIR CONDITIONING Co. (W.L.L.) BYPASS TERMINAL UNITS

DIVISION 15 MECHANICAL

RE: Phase 2 Improvements DATE: July 1, 2016 New Administration Building Wernle Youth & Family Treatment Center 2000 Wernle Road Richmond, Indiana

VCD,VRD,VSD 4/5 GREEN TEMPERATURE OFFSET FOR WINTER HEATING AND COOLING CHANGEOVER MECHANICAL THERMAL MECHANISM

The Creative and Performing Arts High School (CAPA) Pittsburgh, PA 11/11/2002 Andrew Tech Mechanical Option Prof. S. A. Mumma

INSTALLATION & OPERATIONS MANUAL

VAV DIFFUSERS PREVENT DUMPING VAV DIFFUSERS SAVE FAN ENERGY ENERGY SAVING - LOW PRESSURE LOSS REHEAT, OCCUPANCY, FLOW MEASUREMENT

CONTROL THE PERIMETER EFFECTIVELY HORIZONTAL/VERTICAL FLOW PATTERN ONBOARD/REMOTE SENSING EXCELLENT THROW & FLOW HEATING AND COOLING CHANGEOVER

Verasys System Operation Overview Technical Bulletin

EASY VOLUME ADJUSTMENT INCLUDED FLEX CLAMP EXCELLENT THROW & FLOW HEATING AND COOLING TERMINAL REHEAT AVAILABLE

A. Base Bid: 1. Heating Contractor provide: a. Control sequences for HVAC systems, subsystems, and equipment.

Internal ridged board 1" x 1.5 foil face installation shall be installed on roof, walls and base of casing.

Retrocommissioning Findings Summary: Building X #1 Priority: Major Comfort/Control Problems

Installation Guide. Dehumidification. Fresh Air Ventilation. Compact Size. Energy Efficient. RXID-AW90A Whole House Dehumidifier

THE IMPACT OF FACILITY HVAC SYSTEMS ON BIOLOGICAL SAFETY CABINETS

SECTION SEQUENCE OF OPERATIONS FOR HVAC CONTROLS

THIS IS A DESIGN GUIDE NOT A SPECIFICATION. Montgomery County Public Schools Facilities Guide DIVISION 15 MECHANICAL

H3/V3 Series Horizontal and Vertical Indoor Air Handling Units. Engineering Catalog

Airex University VAV Applications Displacement Ventilation

Life Safety Dampers Selection and Application Manual

Raised Access Floor - (AE Breadth Area)

INSTRUMENTATION AND CONTROL DEVICES FOR HVAC

DEMAND CONTROLLED VENTILATION WITHOUT WIRES

Modular Heating & Ventilating Unit Model IGX-HV

High-Performance VAV Systems

IAQ Building Education and Assessment Model (I-BEAM)

CONTENTS. Installation Guide. VT7200 Series

VentZone Systems VentZone Zoned IAQ with Heat Recovery Kits

INSTALLATION, BALANCING & MAINTENANCE

AGRI-AIDE Ventilation Equipment. AGRI-AIDE Ventilation Key to Unlocking...

Single Zone System. One duct system Used mostly in small buildings Forced air system All spaces controlled by a single thermostat Single air return

SESSION Michigan Energy Code (MEC) Update (3 Technical) Per SMACNA Standard (TAB, Duct Design) and ASHRAE ( ) ASHRAE Detroit Members:

SmartZone TM System Manual

AIR DISTRIBUTION DIVISION VOLUME 4

ENERGY EFFICIENCY WITH SUPERIOR INDOOR AIR QUALITY

CONTROLLED CHILLED BEAM PUMP MODULE

REPRODUCTION/DISTRIBUTION IS PROHIBITED. Energy-Savings Strategies for. Rooftop

Rooftop Unit, Heat Pump and Indoor Air Quality Application Guide. SE8600 Series Room Controllers

Madeira City Schools Madeira, Ohio. HVAC Assessment. December 2011 (Revised February 2012)

Selection of air conditioning systems

VentZone Systems VentZone Zoned IAQ with Energy Recovery Kits

Hydronic & HVAC Control Systems

Transcription:

The Problem Overheating or overcooling problem areas? As heating and cooling zones grow larger budget constraints cause multiple work spaces to be controlled by a single thermostat. This causes system efficiency to suffer and occupant complaints to increase. Thermostat Wars result as occupants attempt to adjust the thermostat to their own level of comfort. Receptionist Areas & Entry Ways These spaces are typically exposed or open and cooling is often dumped in this area which causes overcooling problems and receptionist discomfort. Offices Often times, people inhabiting offices in the same zone have different requirements for comfort. This can lead to Thermostat Wars as well. Conference Rooms Peak cooling is needed for larger meetings, but not during normal use or when unoccupied. Building owners don t want to pay to cool during unoccupied times, nor do they want a full-blown zoning system. East/West Exposure East side building exposure is too hot in the morning, then cold in the afternoon. Then conversely, the West side building exposure is cold in the morning and too hot in the afternoon. Without proper zoning, this can lead to discomfort.

Performance Aire offers three VAV comfort solution packages. VAV Thermal Diffusers While energy costs continue to rise, VAV Thermal Diffusers remain an energy free solution to individual comfort control. No wiring, pneumatic piping, or added system pressure is required. Our diffusers are self-contained with the thermostatic control device and damper in each diffuser. Existing systems are easily upgraded with the various diffusers available. Our square and linear diffusers have been providing occupant comfort in offices, schools, hospitals and retail centers for over 25 years. VAV Digital Electronic Diffusers Our VAV Digital Electronic Diffusers incorporate a modulating damper that regulates the volume of supplied air in response to a wall mounted thermostat. The diffuser automatically senses the need for heating or cooling modes. It can be installed as a master/drone with up to 36 drone diffusers for each master (zone). BACnet digital thermostats are available as an option. Control of the diffuser is via a wall-mounted thermostat, enabling users to set desired comfort control from desk top level. VAV Air Terminal Units Performance Aire VAV Air Terminal Units are designed to regulate the flow of conditioned air in a distribution system. They work equally well in constant and variable volume systems. Control is via a low leakage single blade damper seal for use in pressure dependent and pressure independent applications.

VAV Thermal Diffusers Square Plaque Solution General System Applications SC square diffusers are applied to cooling only VAV systems requiring high volume/short throw. SCAH square diffusers are applied to cooling only VAV systems with an adjustable warm air volume control override. SCVH square diffusers are applied to provide cooling and heating VAV control where the application requires a high volume/short throw. Control functions that automatically adjust temperatures in individual workspaces. No control wiring, pneumatic piping, or added system pressure required. Existing systems are easily upgraded with the various diffusers available. Separate and adjustable set points for heating and cooling. Easy access set point adjustment. Diffuser constructed of 24 gauge sheet steel. Architecturally pleasing, blemish free hemmed face panel. Cone shaped diffusion damper. 10 year warranty. Easy access to set point adjustment. Separately adjustable set-points for VAV heating and VAV cooling control Induction Path > Diverts a small amount of supply air causing the induction of a sample of room air to be drawn through the induction trough directly across the temperature control sensors.

VAV Thermal Diffusers Linear Slot Solution LAD General System Applications LAD linear diffusers are applied to provide horizontal cool air/vertical warm air diffusion for exterior spaces when room temperature control is not required. VACH Application of LAD Diffusers The application of the LAD diffuser over entry doors is highly recommended. Vertical warm air flow will greatly enhance the comfort level in the same fashion as an air wash. VAC linear diffusers are applied to VAV cooling room temperature control systems. VACH linear diffusers are applied to provide horizontal VAV cooling/vertical VAV heating room temperature control for exterior spaces. Automatic change over knows when to adjust the flow from horizontal cooling to vertical heating. Existing systems are easily upgraded with the various diffusers available.

VAV Digital Electronic Diffusers Square Plaque Solution General System Applications SE-HC-M The Performance Aire VAV Digital Electronic Diffuser incorporates an internal modulating disk that continually regulates the volume of supply air in response to a wall-mounted thermostat. The Performance Aire VAV Digital Electronic Diffuser is designed to maintain the Coanda effect of discharging air along the ceiling, providing draft free mixing throughout the space. SE-HC-M The model SE-HC-M VAV Diffuser includes a diffuser and modulating actuator. The SE-HC-S can be used as an auxiliary damper when wired to a SE-HC-M diffuser actuator in applications where more than one diffuser is required in a single zone. Up to 36 drones can be added to one master. Diffuser Actuator Wall-mounted thermostatic control. Individual zone control from a wall mounted thermostat. Powerful, low voltage actuator. Floating-point actuators are standard. True variable air volume in heating and cooling modes. The diffuser effectively regulates the amount of supply air into the space and uses a wall mounted thermostat to achieve true VAV control in heating mode, as well as cooling mode. Automatic change over from heating to cooling is standard. S-T Thermostat The Performance Aire S-T Thermostat is designed to work with the modulating zone control system and the stand-alone modulating zone damper and diffuser. S-T Thermostat NETstat Thermostat The Performance Aire NETstat is a BACnet enabled thermostat that combines a controller, multiple sensor options and BACnet networking into a single, integrated space-mounted device. The NETstat thermostat offers a unique, cost-effective combination of networking, application and sensor options, along with easy, intuitive installation, configuration and operation. NETstat Thermostat

VAV Air Terminal Units Single Duct/Round Retrofit Solution General System Applications Model PH Series Model PH Series Single duct air terminal units, model PH are designed to regulate the flow of conditioned air in a distribution system. Single duct air terminal units work equally well in constant and variable volume systems. The Model PH Series is recommended for use in duct systems with static pressure up to 4 wg. Ductwork Units can be specified with hot water coils, access panels, control enclosures and multiple insulation choices. A low leakage single blade damper with integrated blade seal for pressure dependent or pressure independent applications. Available in sizes 4 to 16 round and 20 x 16 rectangular inlets. VAV Box Model PT Series Model PT Series The round retrofit air terminal unit model PT is designed to regulate air flow of conditioned air in single duct or dual duct air distribution systems. The round retrofit ATU is also used to provide positive or negative pressures in laboratory flow hood applications. The Model PT is primarily used to convert constant volume single or dual duct air terminals to more efficient variable volume air terminals without disrupting the total system operation. The round retrofit ATU is easily installed into existing ductwork in front of the existing air terminal. Available in sizes 4 to 16 round.

VAV Thermal Diffusers Square Plaque Diffusers LAD VAV Thermal Diffusers Linear Slot Diffusers VAV Air Terminal Units VACH Model PH Series VAV Digital Electronic Diffusers Square Plaque Diffusers NETstat Thermostat Model PT Series To receive product information, call: 727-431-6197 visit: www.performanceaire.com PERFORMANCE AIRE Smart solutions for temperature control. 2014 Performance Aire. All rights reserved.