FLEX DC SIDE EMITTING projects light sideways instead of perpendicular to the surface. It s a great choice for bending around curved surfaces when upward or downward projection of light is desired. ELECTRICAL Input Voltage Dimming Options Power Consumption Wire Size Certification PHYSICAL Field Cuttable Operating Temperature Environment Maximum Run Length Dimensions (WxH) CONFIGURATION 24VDC MLV 0-10 Volts DMX Triac Lutron (2-WIRE, 3-WIRE, EcoSystem) 2.9 Watts per foot 20AWG, 2 wire ETL - Conforms to UL Std. 2108; Certified to CSA Std. C22.2 No. 9.0 Every 1.97-40 C (-40 F) to +70 C (+158 F) IP40 - Indoor IP67 - Outdoor IP40: 33, IP67: 33 IP40-0.39 (10.0mm) x 0.05 (1.4mm) IP67-0.42 (11.0mm) x 0.16 (4.5mm) IP67 Endcaps - 0.50 (12.70mm) x 0.31 (7.87mm) ACCESSORIES Mounting Clips FLEXMNT.SIL.INT, FLEXMNT.SIL.EXT12 (pg. 3) Connectors LC-I2P-M, LC-I2P-F, LC-O2P-F, LC-O2P-M (pg. 3) LUMEN OUTPUT 2700K 140 lumen/foot 48 lumen/watt 3000K 142 lumen/foot 49 lumen/watt 6000K 146 lumen/foot 50 lumen/watt *Stated lumen values have a tolerance of +/- 10%. PERFORMANCE Color Temperature 2700k, 3000k, 6000k, Red, Green, Blue, Amber Lumen Maintenance 50,000 Hours Binning Tolerance +/- 150k Warranty 3 years LED Bottom + Lead Left LED Bottom + Lead Right LED Top + Lead Left LED Top + Lead Right NUMBER BUILDER + + + + + + + SERIES IP RATING COLOR VOLTAGE WATTAGE LED POSITION LEAD POSITION LENGTH FLEXSIDE 40 = IP40 - Dry Location 67 = IP67 - Wet Location 27 = 2700k 30 = 3000k 60 = 6000k R = Red G = Green B = Blue A = Amber 24 = 24 VDC 29 = 2.9w LT = LED Top LB = LED Bottom LL = LED Left LR = LED Right XX = Custom Length 1 of 8
Optic Arts cuts all FLEXDC and Channel products to length per customer specifications. Each length of FLEXDC is fitted with a 6 wire lead (custom lengths available upon request) and packaged on a reel in an anti-static bag. Bags are labeled with fixture type, length and location (if applicable). Each piece of channel is labeled with fixture type, length and location (if applicable), and is bundled by fixture type. Due to the nature of the FLEXDC product, specific lengths may not fall exactly on a cutting point. In this case, Optic Arts will always cut to the smaller dimension unless otherwise specified. Unless otherwise specified, channel is cut 15mm longer than FLEXDC. Some on-site assembly required. See installation guides for details. INDOOR FLEX DC SE OUTDOOR FLEX DC SE 0.33 0.39 1.97 0.50 0.42 0.05 0.32 0.16 *Encased in silicon INDOOR Width Height Cuttable Segment Length Pitch Length Max Run Length 0.39 (10.0mm) 0.05 (1.4mm) 1.97 (50.00mm) 0.33 (8.25mm) 33.00 (10058.40mm) OUTDOOR Width Height Width (Endcap) Height (Endcap) Max Run Length 0.42 (11.0mm) 0.16 (4.50mm) 0.50 (12.70mm) 0.32 (7.94mm) 33.00 (6096.00mm) INDOOR FLEX DC SE ~0.45 Specified Length OUTDOOR FLEX DC SE ~0.23 Specified Length ~0.13 2 of 8
0.24 (6.00mm) 0.24 (6.20mm) 0.28 (7.00mm) 0.05 (1.30mm) FLEX DC SIDE EMITTING ACCESSORIES LC-I2P-M LC-I2P-F LC-O2P-F LC-O2P-M Indoor Lead Connector (Male) Indoor Lead Connector (Female) Outdoor Lead Connector (Female) Outdoor Lead Connector (Male) Ø 0.74 (18.75mm) Ø 0.75 (19.00mm) 0.94 (23.90mm) 0.77 (19.60mm) 0.47 (12.00mm) 0.57 (14.40mm) 0.29 (7.40mm) 0.21 (5.40mm) 1.72 (43.75mm) 1.72 (43.75mm) FLEX.ZIP FLEXMNT.SIL.INT FLEXMNT.SIL.EXT12 Strain Relief Clip Indoor Mounting Clip Outdoor Mounting Clip 0.37 (9.50mm) 0.77 (19.50mm) 1.08 (27.50mm) 1.24 (28.00mm) 0.19 (4.90mm) 0.55 (14.00mm) 3 of 8
24V DC+ MLV 24V DC- MLV 120 VAC ML10S24VDC ML20S24VDC ML35S24VDC ML35S24VDC-277 ML40S24VDC ML50S24VDC ML50S24VDC-277 ML60S24VDC ML75S24VDC ML75S24VDC-277 ML96S24VDC ML96S24VDC-277 EM2-200S24DC EM3-300S24DC EM2-200S24DC-277 EM3-300S24DC-277 10W 120VAC DIMMABLE 20W 120VAC DIMMABLE 35W 120VAC DIMMABLE 35W 277VAC DIMMABLE 40W 120VAC DIMMABLE 50W 120VAC DIMMABLE 50W 277VAC DIMMABLE 60W 120VAC DIMMABLE 75W 120VAC DIMMABLE 75W 277VAC DIMMABLE 96W 120VAC DIMMABLE 96W 120VAC DIMMABLE 200W 120VAC DIMMABLE, 2 96W CIRCUITS 300W 120VAC DIMMABLE, 3 96W CIRCUITS 200W 120VAC DIMMABLE, 2 96W CIRCUITS 288W 120VAC DIMMABLE, 3 96W CIRCUITS 10W-50W H 2.11 ; W 7.38 ; D 1.60 60W-96W H 3.93 ; W 8.13 ; D 1.59 200-300W H 5.69 ; W 10.29 ; D 3.13 MLV Dims to 20% on most MLV dimmers NOTE: Must be loaded between 75%-100% of rated load to maintain FLEX DC warranty PURE DC 24V DC+ 24V DC- PURE DC MLV PDC.40.24 PDC.96.24 40W 120/277VAC PURE DC MLV DIMMABLE 96W 120/277VAC PURE DC MLV DIMMABLE 40W L 14.25 ; W 3.00 ; H 2.88 96W L 14.75 ; W 4.31 ; H 4.81 120 VAC PURE DC Dims to 0.1% on most MLV dimmers 24V DC+ 24V DC- ELECTRONIC - NON-DIM ELECTRONIC GG100E-24-UNV 96W 120-277VAC ELECTRONIC ELECTRONIC H 3.00 ; W 11.46 ; D 1.30 120-277 VAC ELECTRONIC Non-Dim 4 of 8
24V + 24V - ELECTRONIC W/0-10V MODULE ELECTRONIC GG100E-24-UNV-010V 96W 120-277VAC ELECTRONIC WITH 0-10V DIMMING MODULE (SINK) ELECTRONIC - 0-10V H 3.00 ; W 11.46 ; D 1.30 0-10 + 0-10 - 120-277 VAC ELECTRONIC - 0-10V Dims below 1% on most 0-10V dimmers 0-10 V CONTROLLER FIELD INSTALLED IN LOW VOLTAGE WIRING COMMENT - Install DIM-010V Module in low voltage wiring compartment. - Max number of 25 modules on one dimmer. Consult dimmer datasheet for maximum device limitation of a specific controller. GRAY WIRE TO 0-10V CONTROLLER - VIOLET WIRE TO 0-10V CONTROLLER + BLACK WIRE TO DC - OUTPUT OF RED WIRE TO DC + OUTPUT OF DIM-010V 0-10V MODULE BLUE WIRE TO LED - YELLOW WIRE TO LED + 120-277 VAC ELECTRONIC ELECTRONIC W/DMX MODULE GG100E-24-UNV-DMX 96W 120-277VAC ELECTRONIC WITH eldoled DMX DIMMING MODULE 96W H 3.00 ; W 11.46 ; D 1.30 DMX MODULE H 1.97 ; W 6.02 ; D 0.91 24V DC- *Must be installed in UL box (by others) 24V DC+ DMX MODULE ELECTRONIC - DMX MODULE Dims to 0.1% on most DMX systems DMX in + DMX in - DMX in shield LED+ CH1 - CH2 - CH3 - CH4 - FROM DMX CONTROLLER (BY OTHERS) OUT TO NEXT MODULE (32 MAX) W/A B G R LED+ 5 of 8
DIMMER WITH 24V DC + 1% 2-WIRE: 2-WIRE CONTROL FORWARD PHASE Optic Arts is a Lutron OEM Advantage Partner 24V DC - LTEA4U1UKL-CV240 5-40W, 120VAC, 2-WIRE FORWARD PHASE 1% 2-WIRE 1% 2-WIRE H 4.00 ; W 4.89 ; D 2.62 1% 2-WIRE Dims to 1% with compatible Lutron controls DIMMED LINE (BLACK) (WHITE) -WIRE DIMMER/MODULE/PANEL DIMMER WITHOUT 24V DC + 24V DC - 1% 2-WIRE DIMMED LINE (BLACK) FORWARD PHASE DIMMER WITHOUT (WHITE) 6 of 8
3-WIRE 24V DC + 1%: 3-WIRE/ECOSYSTEM Optic Arts is a Lutron OEM Advantage Partner 24V DC - L3DA4U1UKL-CV240 5-40W, 120-277VAC, 3-WIRE/ECOSYSTEM E1 (Purple) E2 (Purple) 1% 3-WIRE 1% 3-WIRE/ ECOSYSTEM 1% 3-WIRE/ECOSYSTEM H 4.00 ; W 4.89 ; D 2.62 Dims to 1% with compatible Lutron controls SWITCHED LINE (BLACK) DIMMED LINE (ORANGE) 3-WIRE DIMMER/MODULE/PANEL (WHITE) ECOSYSTEM 24V DC + TO ECOSYSTEM DIGITAL LINK 24V DC - E1 (Purple) E2 (Purple) 1% 3-WIRE DIMMED LINE (ORANGE) 7 of 8
3-WIRE 24V + PREMIER: 3-WIRE/ECOSYSTEM Optic Arts is a Lutron OEM Advantage Partner 24V - L3D0-96W24V-U 2-96W, 120-277VAC, 3-WIRE/ECOSYSTEM PREMIER PREMIER H 5.5 ; W 10.5 ; D 2.0 PREMIER Dims to 0.1% with compatible Lutron controls NOTE: Lutron soft-on, fade to black technology available with Ecosystem Digital Control only. 3-WIRE DIMMER/MODULE/PANEL SWITCHED (L) DIMMED HOT (DH) ECOSYSTEM 24V + 24V - PREMIER (WITH ECOSYSTEM CONTROL & SOFT-ON FADE TO BLACK TECHNOLOGY) TO ECOSYSTEM DIGITAL LINK E1 (Purple) E2 (Purple) 120-277 VAC 8 of 8