Aura Aura downlights support specially designed optics known as the POLARIZING PRISM diffuser, which polarizes and redistributes the LED light emission widening its beam spread. The LED with internal secondary optics generally has a definite beam, whilst thanks to the POLARIZING PRISM system the beam spread is widened out and nearly doubled achieving a final diffuse light effect. These features allow remarkably improved visual comfort as the dazzling effect is considerably reduced if the light source is directly gazed on. The emission obtained is of the Flood type. Measurements confirm that given a 25 secondary optics inner source, the beam emitted with the POLARISING PRISM filter is 50. LED used are with very stable chromaticity (< 2 SDCM). so there are no perceptible colour deviations when using several luminaires. Premium colour rendering index CRI > 95,with R9 (red) > 90 Colour temperature 2700/3000/4000 K-Fixture is made of die cast aluminum in 9w /12 w and 15w smd Led D H Model D H Cut Out LED 2101-09 LED 2102-12 148 172 55 60 125 152 IP44 LED 2103-15 200 60 175 Technical Data: Aura LED 2101-09 9w LED 2102-12 LED 2103-15 12w 15w 30
Orbik The Orbik is high output architectural LED downlight delivers exceptional 90+ CRI light while achieving over 120 lumens per watt. This breakthrough performance is achieved by combining the high efficacy and high-quality light of Cree TrueWhite Technology. The Orbik is available in warm and cool color temperatures and features spec grade aesthetics with a polished lower reflector. It is designed to easily install, making the Orbik perfect for use as a CFL and metal halide downlight replacement in commercial new construction or retrofit applications. H Luminiare body is made of die cast aluminum with low heat resistance, installation ring made of sheet steel and white x powder coated. Seperate housing for LED driver, available in 7w 12w 18w & 24w LED Mounting suitable for ceiling installation with tension springs. Application in Offices, Retail shops, Hallways, exhibition Model x H Cutout rooms, Museums etc. 2105 130 78 118 2106 190 96 178 2107 240 102 218 IP44 Technical Data: Orbik LED 2105-07 7w LED 2105-12 LED 2106-12 12w 12w LED 2106-18 LED 2107-18 18w 18w LED 2107-24 24w 31
Cielos I Cielos I is an IP65 downlight which support specially designed LED array mounted on horizontal die cast finned heat sink with vacuum metalized aluminum reflector. The downlight is designed for 13w Led chip in 3000K CCT with >80 CRI and in 72 degree beam angle. Downlight comes in with IP65 ingress protection and is available in White, Black & Grey finish. 75 Ø142 IP65 Technical Data: Cielos I LED 1536-13 13w 32
Cielos II Cielos II is an IP65 downlight which support specially designed LED array mounted on horizontal die cast finned heat sink with vacuum metalized aluminum reflector. The downlight is designed for 18w Led chip in 3000K CCT with >80 CRI and in 72 degree beam angle. Downlight comes in with IP65 ingress protection and is available in White, Black & Grey finish. 102 Ø194 IP65 Technical Data: Cielos II LED 1537-18 18w 33
Lumen 34
Lumen Lumen is a range of simple and discrete fittings, able to be installed in a multitude of situations, all the while generating maximum visual comfort. The dual adjustability of the body, the practical mechanical locks make Lumen an extremely flexible instrument. Fixture made of aluminum die cast in LED 2108-09 LED 2109-28 9w/ 18w/ 27w and 28w LED. Sololuce has opted for very narrow selection diodes for its products, and we carry out 52 regular checks on LEDs in order to guarantee consistency and homogeneity of the emitted light tone. LED used are with very stable chromaticity (< 2 SDCM), so there are no Ø175 LED 2108/09 perceptible colour deviations when using several luminaires - Premium colour rendering index CRI > 95, with R9 (red) > 90. Colour temperature 2700/3000/4000 K Lumen effectively answer s varied lighting needs in retail situations, malls & restaurants Ø175 343.5 LED 2108-18 52 Ø175 52 495 LED 2108-27 Technical Data: Lumen LED 2108-09 LED 2108-18 LED 2108-27 LED 2109-28 9w 18w 27w 28w 35
Briton LED 2110-09 Briton is a simple and discrete fittings, able to be installed in a multitude of situations, all the while generating maximum visual comfort. The dual adjustability of the body, the practical mechanical locks make Lumen an extremely flexible instrument. Fixture made of aluminum die cast in 9w LED. Sololuce has opted for very narrow selection diodes for its products, and we carry out regular checks on LEDs in order to guarantee consistency and homogeneity of the emitted light tone. LED used are with very stable chromaticity (< 2 SDCM), so there are no perceptible colour deviations when using several luminaires - Premium colour rendering index CRI > 95, with R9 (red) > 90. Colour temperature 2700/3000/4000 K Lumen effectively answer s varied lighting needs in retail situations, malls & restaurants LED 2110-09 Technical Data: Lumen LED 2110-09 9w 36
Micros Micros downlight support specially designed LED array mounted on die cast finned heat sink with vacuum metalized aluminum reflector. The downlight is designed for 7w Led chip in 2700 k/3000k & 5600k CCT with >80 CRI and in 30 degree beam angle. Downlight comes in two versions with and IP65 ingress protection. IP65 version is with front glass. D H Model LED 1530-07 D 90 H 48 Cut Out 78 IP65 Technical Data: Micros LED 1530-07A 7w LED 1530-07B (IP65) 7w 37
Arcos Arcos downlight support specially designed LED array mounted on die cast finned heat sink with vacuum metalized aluminum reflector. The downlight is designed for 7w Led chip in 3000K & 5600k CCT with >80 CRI and in 37 degree beam angle. Downlight comes in with ingress protection and is available in White, Black, Grey, Chrome and Satin Nickel finish. Ø84 Ø84*73mm 73 Technical Data: Arcos LED 1531-07 7w 38
Panos Panos downlight support specially designed LED array mounted on die cast finned heat sink with vacuum metalized aluminum reflector. The downlight is designed for 10.5w and 15w Led chip in 3000K, 4000k & 5000k CCT with >80 CRI and in 16 & 18 degree beam angle. Downlight comes in with ingress protection and is available in White, Black, Grey, Chrome and Satin Nickel finish. 105 Ø112 Technical Data: Panos LED 1532-10.5 10.5w LED 1532-15 15w 39
Credos Credos downlight support specially designed LED array mounted on die cast finned heat sink with vacuum metalized aluminum reflector. The downlight is designed in 10.5w/15w and 26w Led chip in 3000K & 5600k CCT with >80 CRI and in 16, 18 & 20 degree beam angle. Downlight comes in with ingress protection and is available in White, Black, Grey, Chrome and Satin Nickel finish. 75 Ø135 Cutout 125mm Technical Data: Credos LED 1534-10.5 10.5w LED 1534-15 15w LED 1534-26 26w 40
Maximo Maximo is maximum burst of light from the smallest possible downlight. Maximo supports specially designed LED array mounted on die cast finned heat sink incorporating Synjet Active Cooling Technology with vacuum metalized aluminum reflector. The downlight is designed for 50w Led chip in 3000K, 4000k & 5000k CCT with >80 CRI and in 46 degree beam angle. Downlight comes in with ingress protection and is available in White, Black & Grey finish. Synjet Active Cooling Technology : Active cooling is the most efficient way to transfer heat from Led chip and keep it cool. It has no bearings or lubricants and runs for over 100,000 hours life. 126 Ø145 Cutout 128mm Technical Data: Maximo LED 1535-50 50w 41
Sandos Sandos is surface mounted downlight which support specially designed LED array mounted on die cast finned heat sink with vacuum metalized aluminum reflector. Whole body is made of aluminum. The downlight is designed for 10.5w and 15w Led chip in 3000K, 4000k & 5000k CCT with >80 CRI and in 22 degree beam angle. Downlight comes in with ingress protection and is available in White, Black & Grey finish. 170 Ø93 Technical Data: Sandos LED 1533-10.5 10.5w LED 1533-15 15w 42
Troll LED 1477-18 Troll has a basic design that guarantees light direction that fully respects the aesthetic values of the space where it resides. Two different options with the possibility of application both fixed downlight and adjustable light emission The multitude of optics make Troll the answer to lighting requirements in covered pedestrian areas, colonnades, shelters, underpasses, Retails and malls. This range of fittings was designed to ensure easy installation as well as an efficient and economical maintenance management. Made of deep drawn aluminum housing in IP44 ingress protection The fixture comes in fixed and adjustable optics. LED 1477-15 LED 1477-15 Ø220 170 Ø155 IP44 Technical Data: Troll LED 1477-18 fixed 18w LED 1477-15 ajustable 15w 43
Corona Corona is an IP65 downlight which support MR16 and GU10 LED lamp. Available colour temperatures are 2700K, 3000K, 4000K CCT and it comes with 24/ 36 / 60 degrees beam angle with a clearly defined beam spread Downlight comes in with IP65 ingress protection and is available in White, Black & Grey finish. Suitable LED lamps for Corona which can replace energy consuming halogen MR16/GU10 lamps: 4w -7w - 10w 4w - 6w LED MR16 dimmable endura LED with G5.3 holder with 24/36/60 degrees beam 2700k/3000k/4000k LED GU10 dimmable lamp with GU10 lamp holder with 25/40 degree beam angle in 2700k/3000k/4000k IP65 Technical Data: Corona LED 1538-04/MR16 LED 1538-06/MR16 LED 1538-10/MR16 10w LED 1538-04/GU10 LED 1538-06/GU10 44
Volo Volo is an IP65 downlight which support MR16 and GU10 LED lamp. Available colour temperatures are 2700K, 3000K, 4000K CCT and it comes with 24 / 36 / 60 degrees beam angle with a clearly defined beam spread Downlight comes in with IP65 ingress protection and is available in White, Black & Grey finish. Suitable LED lamps for Volo which can replace energy consuming halogen MR16/GU10 lamps: 4w -7w - 10w 4w - 6w LED MR16 dimmable endura LED with G5.3 holder with 24/36/60 degrees beam 2700k/3000k/4000k LED GU10 dimmable lamp with GU10 lamp holder with 25/40 degree beam angle in 2700k/3000k/4000k IP65 Technical Data: Volo LED 1539-04/MR16 LED 1539-06/MR16 LED 1539-10/MR16 10w LED 1539-04/GU10 LED 1539-06/GU10 45
Capri Capri is drop glass construction downlight which support MR16 and GU10 LED lamp. Available colour temperatures are 2700K, 3000K, 4000K CCT and it comes with 24 / 36 / 60 degrees beam angle with a clearly defined beam spread Downlight comes in with ingress protection and is available in White, Crome & Grey finish. Suitable LED lamps for Capri which can replace energy consuming halogen MR16/GU10 lamps: 4w -7w - 10w 4w - 6w Technical Data: Capri LED MR16 dimmable endura LED with G5.3 holder with 24/36/60 degrees beam 2700k/3000k/4000k LED GU10 dimmable lamp with GU10 lamp holder with 25/40 degree beam angle in 2700k/3000k/4000k LED 1540-04/MR16 LED 1540-06/MR16 LED 1540-10/MR16 10w LED 1540-04/GU10 LED 1540-06/GU10 46
Vista Vista is an IP65 downlight which support MR16 and GU10 LED lamp. Available colour temperatures are 2700K, 3000K, 4000K CCT and it comes with 24 / 36 / 60 degrees beam angle with a clearly defined beam spread Downlight comes in with IP65 ingress protection and is available in White, Black & Grey finish. Suitable LED lamps for Vista which can replace energy consuming halogen MR16/GU10 lamps: 4w -7w - 10w 4w - 6w Technical Data: Vista LED MR16 dimmable endura LED with G5.3 holder with 24/36/60 degrees beam 2700k/3000k/4000k LED GU10 dimmable lamp with GU10 lamp holder with 25/40 degree beam angle in 2700k/3000k/4000k IP65 LED 1541-04/MR16 LED 1541-06/MR16 LED 1541-10/MR16 LED 1541-04/GU10 LED 1541-06/GU10 10w 47
Mobile Nano Mobile Nano is an downlight which support MR16 and GU10 LED lamp. Available colour temperatures are 2700K, 3000K, 4000K CCT and it comes with 24 / 36 / 60 degrees beam angle with a clearly defined beam spread Downlight comes in with ingress protection and is available in White, Crome, Satin Nickel and Gold colour. Suitable LED lamps for Mobile Nano which can replace energy consuming halogen MR16/GU10 lamps: 4w -7w - 10w 4w - 6w LED MR16 dimmable endura LED with G5.3 holder with 24/36/60 degrees beam 2700k/3000k/4000k LED GU10 dimmable lamp with GU10 lamp holder with 25/40 degree beam angle in 2700k/3000k/4000k Technical Data: Mobile Nano LED 1538-04/MR16 LED 1538-06/MR16 LED 1538-10/MR16 10w LED 1538-04/GU10 LED 1538-06/GU10 48
Siena Siena has been designed with light source place deep inside to create an accent lighting but without glare. This fixture is suitable to illuminate shops, restaurants, hotels, and especially galleries, exhibitions and museums. Siena supports MR16 and GU10 LED lamp. Downlight comes in with ingress protection and is available in White, Black & Grey finish. Suitable LED lamps for Siena which can replace energy consuming halogen MR16/GU10 lamps: Options: Siena -M: Matt finish reflector Siena- S: Mirror finish behive reflector 4w -7w - 10w 4w - 6w Technical Data: Siena LED MR16 dimmable endura LED with G5.3 holder with 24/36/60 degrees beam 2700k/3000k/4000k LED GU10 dimmable lamp with GU10 lamp holder with 25/40 degree beam angle in 2700k/3000k/4000k LED1658-04/MR16 LED 1658-06/MR16 LED 1658-10/MR16 LED 1658-04/GU10 LED 1658-06/GU10 M for matt reflector and S for mirror reflector 10w 49
Aqua Aqua has been specially designed downlight with finned die cast aluminum body with fixed head that supports MR16 and GU10 LED lamp. Downlight comes in with ingress protection and is available in White, Black & Grey finish. Suitable LED lamps for aqua which can replace energy consuming halogen MR16/GU10 lamps: 4w -7w - 10w 4w - 6w Technical Data: Aqua LED MR16 dimmable endura LED with G5.3 holder with 24/36/60 degrees beam 2700k/3000k/4000k LED dimmable lamp with GU10 lamp holder with 25/40 degree beam angle in 2700k/3000k/4000k LED1656-04/MR16 LED 1656-06/MR16 LED 1656-10/MR16 LED 1656-04/GU10 LED 1656-06/GU10 10w 50
Alicia Nano Alicia Nano has been designed with invisible, adjustable lamp head in CRCA powder coated body that supports MR16 and GU10 LED lamp. Downlight comes in with ingress protection and is available in White, Black & Grey finish. Suitable LED lamps for aqua which can replace energy consuming halogen MR16/GU10 lamps: 4w -7w - 10w 4w - 6w Technical Data: Alicia Nano LED MR16 dimmable endura LED with G5.3 holder with 24/36/60 degrees beam 2700k/3000k/4000k LED dimmable lamp with GU10 lamp holder with 25/40 degree beam angle in 2700k/3000k/4000k LED1657-04/MR16 LED 1657-06/MR16 LED 1657-10/MR16 LED 1657-04/GU10 LED 1657-06/GU10 10w 51