Electric AquaMAX Electric Water Heaters are 15% more efficient than the rest ALL AUSTRALIAN VITREOUS ENAMEL ELECTRIC WATER HEATERS
Enough hot water for all the team
You're always in hot water with AquaMAX. Proudly Australian Award winning AquaMAX high efficiency Electric water heater systems keep your whole team in steaming hot water all year round. Energy efficient Mains Pressure hot water, that keeps up with any demand you throw at it. AquaMAX hot water systems are built to last using the latest technology and backed by five year MAXI-namel cylinder warranties. 1 And AquaMAX are made by Aussies for Aussie conditions, right here at home so, no matter how large your team is, you can count on AquaMAX to go the distance. Aquamax Electric Water Heater E50 E80 E125 E160 E250 E315 This label is awarded to appliances that are amoung the most energy efficient on the market in their class at the time of testing. For more information and compare appliances refer to: www.energyrating.gov.au BETTER THAN THE REST BY 15% Winner of the Top Energy Saver Award (TESAW) for the third year running, AquaMAX Electric water heaters are a proven 15% more efficient than any other MEPS approved unit on the market. Making them the obvious choice when you need no fuss, high efficiency Electric hot water that delivers every time. EXPERIENCE AquaMAX has a long and proud history. From the days of our holding company (previously called Pyrox Limited) to present day we have been associated with design and manufacture of water heaters in the Australian hot water market for over sixty years. The envy of the industry for our high efficiency and long life products, we have created low maintenance products that provide current installers and consumers with confidence for the future. Ask your plumber about the industry record of our water heaters and we are very confident our record will speak for itself. 3
Choose the AquaMAX that s right for yo ALL NEW 50L SMART THINGS COME IN SMALL PACKAGES Re-designed from the ground up to be everything you asked for in a compact water heater, the 50 Litre electric is MEPS compliant and a TESAW winner as well. In our re-design we have solved the access problem faced by most small water heaters installed indoors by relocating all the service outlets forward for easier access. And unlike opposition MEPS units ours hasn t got any bigger. 160L SQUAT A BIG TANK MADE FOR SHORT SPACES The AquaMAX commitment to innovation continues with the Electric160 Litre squat. Finally an electric water heater that brings larger capacity to awkward indoor spaces. With dual outlets and a MAXI-namel tank, the 160 Litre squat brings more reliable delivery in a smarter package. Hot water power in every size. 4
u. The AquaMAX electric range are not only the most energy efficient electric water heaters available; they are fully compliant with, and exceed the new MEPS standards by 15%. ALL NEW 400L BIG DELIVERY FOR A BIG TEAM The all new Electric 400 Litre sets a new standard in electric hot water delivery allowing even the largest of families to take full advantage of off-peak tariffs with its massive 400 litre storage capacity. Built with dual outlets and a MAXI-namel tank, the Electric 400L is available in single or twin element models. Since the release of our AquaMAX electric mains pressure water heaters; families big and small will always have hot water on tap. And the AquaMAX factory torture test has made sure of this, testing that every new system we create is tough enough to keep up with the most demanding households; whether it's installed indoors or outdoors. You can also take advantage of off-peak tariffs for added savings on your energy bills. How do we make them so tough? Technically speaking, after the cylinder domes have been fully welded, we apply the highest standard of enamel coat using the latest multi-head spray equipment to create our MAXI-namel lining. Combined with a sacrificial anode and protected by a strong coated steel casing with rounded edges; every AquaMAX electric water heater will perform to the very max, every time. And that s a promise backed by a 5 year cylinder warranty. 1 5
The best in electric is AquaMAX. A LOOK INSIDE SHOWS THE DIFFERENCE A quick look inside will show you just why AquaMAX Electric water heaters are the best. With Maxi-namel lining on a welded steel tank, Copper or INCONEL elements and replaceable 3/4" magnesium anodes (1" for 250, 315 & 400), these electric water heaters will work and work for years and years without any complaint. Also note the dual service outlets on both sides of the unit and the option of single or twin elements. Hard water anodes are also available. Full Polyurethane insulation cover on top dome Twin positive domes Polyurethane Insulation Dual Water Outlet Thermostat Twin Element (top) No screws in outer case seams MAXI-Namel Replaceable Anode Coated Steel Casing Butt welds for all cylinder welds Dual Water Inlet Single Element (bottom) Twin positive domes Rounded edges for ease of installation in tight spaces 6
UPGRADE TO SOLAR ANY TIME YOU WANT Aquamax s award winning Solarmax systems offer significant financial and environmental savings with boosted capacity that will help ensure you never run out of energy efficient hot water. Our Electric 160L, 250L, 315L and 400L water heaters all have the capability to be upgraded to a Solarmax system using your existing unit. 2 So if you are still not sure on going solar or you just want to spread the cost, AquaMAX gives you the freedom to upgrade your system at your pace. Call Aquamax on 1800 676 000 or visit our website at aquamax.com.au for more information. Solar Upgrade No of panels Panel A and S0000-000-107-01 1 Controller S0000-000-207-02 2 Panel B and S0000-000-104-01 1 Controller S0000-000-204-02 2 Panel A Panel B 2040L x 1200W 1930L x 1020W 7
AQUAMAX Pty. Ltd. A.C.N. 006 852 820 A.B.N. 17 006 852 820 463-467 Warrigal Road Ph: (03) 9556 5555 Moorabbin Vic 3189 Fax: (03) 9556 5534 Email: sales@aquamax.com.au Toll Free: 1800 676 000 For more information visit our website www.aquamax.com.au AQUAMAX ELECTRIC WATER HEATER SPECIFICATIONS Model No Hot Water Delivery Litres Boost Capacity (Twin Element) Litres Height mm Diameter mm Weight (empty) kg Maximum Loading Watts Heating Element Upper Watts Heating Element Lower Watts 400 Litre E400S36 E400S48 E400T36 E400T48 400 400 400 400 82 82 1760 1760 1760 1760 685 685 685 685 95 95 95 95 3600 4800 315 Litre E315S36 E315S48 E315T36 E315T48 315 315 315 315 62 62 1750 1750 1750 1750 617 617 617 617 90 90 90 90 3600 4800 250 Litre E250S36 E250S48 E250T36 E250T48 250 250 250 250 52 52 1430 1430 1430 1430 617 617 617 617 75 75 75 75 3600 4800 160 Litre Squat E160S24X E160S36X E160S48X 160 160 160 970 970 970 617 617 617 54 54 54 2400 3600 4800 2400 3600 4800 160 Litre 125 Litre 80 Litre 50 Litre Model No E160S24 E160S36 E160S48 E160T24 E160T36 E160T48 E125S24 E125S36 E125S48 E80S18 E80S24 E80S36 EM50S18L EM50S24L EM50S36 EM50S48 Hot Water Delivery Litres 160 160 160 160 160 160 125 125 125 80 80 80 50 50 50 50 Boost Capacity (Twin Element) Litres 46 46 46 Height mm 1600 1600 1600 1600 1600 1600 1270 1270 1270 870 870 870 670 670 670 670 Diameter mm 487 487 487 487 487 487 487 487 487 487 487 487 400 400 400 400 Weight (empty) kg 60 60 60 60 60 60 52 52 52 35 35 35 23 23 23 23 Maximum Loading Watts 2400 3600 4800 2400 3600 4800 2400 3600 4800 1800 2400 3600 1800 2400 3600 4800 Heating Element Upper Watts 2400 3600 4800 Heating Element Lower Watts 2400 3600 4800 2400 3600 4800 2400 3600 4800 1800 2400 3600 1800 2400 3600 4800 Electric Models Specifications E160X, E250, E315, E400 EM50, E80, E125, E160 Voltage (single phase) 240Vac 240Vac Max Supply Pressure - with expansion control valve 650kPa 960kPa - without expansion control valve 850kPa 1120kPa Pressure & Temp relief valve 1000kPa 1400kPa ECV setting 850kPa 1250kPa Thermal setting (Max) 75ºC 75ºC Hot & Cold Water connection Rp 3/4" (20mm) Female Rp 3/4" (20mm) Female Warranty (Cylinder) 1 5 years 5 years Warranty (Parts & Labour) 1 1 year 1 year Protection rating IPX4 IPX4 Watermark No W200 W200 Approval No V01551 V01551 PRESSURE & TEMP RELIEF VALVE (PTR Valve) Rp 1/2 (15) Female HOT WATER OUTLET CONNECTION LHS Rp 3/4 (20) Female ANODE CAP DUPLICATE INLET & OUTLET WATER CONNECTIONS ON RHS Due to constant product improvements, the above specifications are subject to change without notice. 1 Full warranty details available on request from AquaMAX Pty Ltd. Call Toll Free 1800 676 000 2 A service call is required for modification to solar. HEATER SIZE DIMENSIONS (mm) H A B D 400 1760 1525 235 685 315 1750 1535 215 617 250 1430 1215 215 617 160x 970 755 215 617 160 1600 1410 185 487 125 1270 1085 185 487 80 870 675 185 487 50 670 490 185 400 A COLD WATER INLET CONNECTION LHS Rp 3/4 (20) Female B D H ELECTRICAL COVER WIRING ENTRY ELECTRIC STORAGE WATER HEATER Part No. 0807 0905032