WTER BTHS CONSTNT TEMPERTURE & IMMERSIBLE EVICES Standard Water Baths Shaking Water Baths Immersible Circulators Stirrer Compatible Water Baths Multi-postition Water Baths Immersible Coolers
Water Baths Water Bath Type Temperature Range Capacity (pprox. L) Type* Regulation ccuracy Model No. Standard Stirrer Compatible mbient +5 C ~ boiling mbient +5 C ~ 90 C mbient +7 C ~ 80 C 8 12 3.8 8 12 16 ±0.5 at 70 C ±3 at 60 C ±3 at 60 C ±3 at 60 C ±0.5 at 50 C TBS221 TBS271 TBS271 TBS181S TBS221S TBS271S TBS451P Economically priced models suitable for a variety of applications. Specially built to be used with our line of magnetic stirrers. High capacity, lightweight, and easy to operate. Multi- Position** mbient +5 C ~ boiling Shaking mbient +5 C ~ 70 C 12 (6 pos.) 9 (8 pos.) 14 (12 pos.) 29 (24 pos.) 14 25 ±3 C ±0.1 to ±0.2 C ±0.1 to ±0.2 C TBM106 TBM204 TBM206 TBM212 TBK202 TBK202 TBK602 Best for repetitive applications. Baths include ring lids and clamping assembly convenient for re-use. Incubate samples at a constant temperaure with a gentle or vigorous shaking motion. *For "Temperature regulation type", = Liquid expansion thermostat/ial control (nalog), = PI microprocessor control (igital) **Multi-Position series include ring lids and clamp sets that accommodate flasks per the number of positions listed. The bath can be used for any general application by simply removing the lid. Immersion evices Temperature Range* Type Regulation ccuracy** Model No. Constant Temperature Circulators 20 C ~ 70 C 0 C ~ 70 C 0 C ~ 100 C -30 C ~ 100 C 0 C ~ 180 C ±0.2 to ±0.4 C ±0.2 to ±0.4 C ±0.05 to ±0.2 C ±0.1 to ±0.2 C ±0.2 to ±0.4 C ±0.05 to ±0.2 C ±0.03 to ±0.1 C ±0.05 to ±0.4 C TB081B TB081 TB082 TBP102B TB103 TBP105 TBP105R TBP127 Choose from a wide variety of of immersion circulators. Options include: analog/digital thermostat control, propeller or jet circulation system, etc. Low-priced stainless steel, polypropylene, and acrylic tanks available to suit your needs. Immersion Coolers -20 C ~ mbient -25 C ~ mbient -30 C to mbient TBC120 TBC120 TBC230 TBC230 TBC370 TBC370 For lowering bath temperaure below ambient room temperature. Compatible with some constant temperature immersion circulators. *Temperature range for immersion circulators is from ambient +5 C, but can be extended to lower temperatures when used with compatible immersion type coolers. **For Immersion Coolers, this feature is "Temperature Sensitivity".
STNR WTER BTHS TBS221, TBS271, TBS271 Safety features include empty bath automatic shut-off and overheating breaker. Choose from a variety of optional lid types to best suit your application. Check current and set temperature on the digital display (Model TBS271). TBS271+Ring Lid Model TBS221 TBS271 TBS271 Temperature Control ccuracy Temperature istribution Heat-up Time (20 C to Boiling) Exterior Overall imensions (WxxH, in mm) Internal imensions (WxxH, in mm) Capacity (pprox. L) Weight (pprox. kg) Standard ccessories Optional ccessories Basket Lid Ring Lid *Thermometer not included with TBS271 Room temperature+5 C ~ boiling ±3 C at 70 C at 70 C ±5 C at 70 C ±5 C at 70 C pprox. 45min. pprox. 55min. Liquid expansion thermostat PI control SUS316L 800W SUS316L 1.2kW Baked-on melamine finish on galvanized steel 310x390x240 220x220x170 360x440x240 270x270x170 370x440x310 8L 12 L 7kg 8kg 9kg Shelf (1), Support Rod (1), Clamp (1) Thermometer (1)*, Fitting (1) ø40, 56, 72, 95mm TBP000630 ø45, 75, 105, 135mm TBP000620 ø45, 75, 105, 135, 165, 195, 225mm TBP000640 TBS271 TBS221+Basket Lid WTER BTHS FOR MGNETIC STIRRERS TBS181S, TBS221S, TBS271S Simple setup; liquid expansion type thermostat. Easy to grip handles and efficient design. Use as a water bath, stirrer bath, or heat evaporator. Bath components incorporate durable stainless steel construction. igital display, circulation system, and overheating breaker (TBS451P) Model TBS181S TBS221S TBS271S TBS451P* Temperature Control ccuracy Temperature istribution mbient room temperature+5 ~ 90 C ±3 C at 60 C ±5 C at 60 C mbient+7~80 C at 50 C ±1.5 C at 50 C Heat-up Time pprox. 50min. pprox. 60min. pprox. 70min. pprox. 100min. (20 ~ 90 C) (20 ~ 80 C) Liquid expansion thermostat PI control SUS316L 600W SUS316L 800W SUS316L 1.2kW SUS316L 1kW Overall imensions (WxxH, in mm) 235x240x120 275x280x170 325x330x170 560x320x275 Internal imensions (WxxH, in mm) Capacity (pprox. L) 180x180x120 3.8L 220x220x170 8L 270x270x170 12L 450x307x100 16L Weight (pprox. kg) 1.8kg 3kg 3.5kg 9.5kg Standard ccessories Shelf (1), Thermometer (1) Compatible Stirrers SRS311/316, (By model, sold separately) SRS311H/316H SRS710, SRS710H SRS261P *TBS451P uses a propeller type circulation system. Cover and ring lids (6 sets) are available as TB000650. TBS181S TBS221S+SRS710
MULTI-POSITION WTER BTHS TBM106, TBM204, TBM206,TBM212 Convenient storage on backside of the unit for holding circular lids. Bath cover and concentric ring lids can be removed with ease: remove to accommodate large and irregularly-shaped vessels Several standard safety features included in all models. Tub, heating element, and accessories incorporate durable stainless steel construction. Model TBM106 TBM204 TBM206 TBM212 Temperature Control ccuracy Temperature istribution Heat-up Time (20 C to boiling) Exterior Positions Lid iameter Overall imensions (WxxH, in mm) Internal imensions (WxxH, in mm) mbient room temperature+5 C ~ boiling ±3 C at 70 C ±5 C at 70 C pprox. 35min. pprox. 35min. pprox. 45min. pprox. 60min. Liquid expansion thermostat SUS316L 1.4kW SUS316L 1.2kW SUS316L 1.4kW SUS316L 4kW Baked-on melamine finish on galvanized steel 1 row, 6 pos. 2 rows, 4 pos. 2 rows, 6 pos. 2 rows, 12 pos. Large: ø115mm, Medium: ø85mm, Small: ø55mm 930x290x210 450x420x210 630x420x210 1050x435x260 830x150x100 325x300x100 500x300x100 920x320x100 TBM206 Capacity (pprox. L) Weight (pprox. kg) Standard ccessories 12L 9L 14L 29L 14kg 11kg 14.5kg 25kg Bath cover (1), Shelf (1), Ring lids (1 set), Support rod (2), Fittings (1 set), Crossbar (1), Clamps (1 set), Thermometer (1) *Please contact us for additional information regarding optional accessories. TBM212 SHKING WTER BTHS TBK202, TBK202, TBK602 Uses accurate and easy to set PI thermostat (TBK202/602). Smooth shaking motion anywhere from 20 to 160 rpm. Compact design suitable for bench tops. Safety features include empty bath automatic shut-off, overheating and short circuit breakers; TBK602 & TBK202 also include a self-diagnostic program. Model TBK202 TBK202 TBK602 Temperature Control ccuracy mbient room temperature+5c ~ 70 C ±3 C ±0.1 C ~ ±0.2 C Rack Heat-up Time (20 C to boiling) pprox. 50min. (for 8 L water) pprox. 90min. (for 15 L water) Shake Rate 20 ~ 160 rpm, continuously variable Shaking width 30mm 35mm Liquid expansion PI control by microprocessor thermostat SUS316L 900W SUS316L 1.3kW Circulation System Magnetic pump system TBK202 TBK202 Exterior Baked-on melamine finish on galvanized steel Overall imensions(wxxh, in mm) 350x540x350 835x350x350 Internal imensions(wxxh, in mm) 250x335x170 600x250x170 Rack size (Wx, in mm) 225x255 255x225 (x2 racks) Maximum Number of Vessels (pcs./rack) ø11mm test tube: 168 (x2 for TBK602) 100mL erlenmeyer flask: 8 (x2 for TBK602) 300mL erlenmeyer flask: 6 (x2 for TBK602) Capacity (pprox. L) 14L 25L Weight (pprox. kg) Standard ccessories 20kg Thermometer, Rack (x2 for TBK602) 30 kg TBK602
CONSTNT TEMPERTURE UNITS TB081B, TB081, TB082, TBP102B TBP102B TB081 esign allows these units to be used with compact water baths. (minimum depth of 140 mm is required) Each model is economically priced. variety of safety features insure that samples and water bath will be protected from unexpected changes in heating conditions. Model TB081B TB081 TB082 TBP102B TB081B TB082 Programmable Range* Temp. Control Range ccuracy Temperature djustment Temperature isplay Circulator Type Clamping Width Overall imensions (WxxH, in mm) Weight (pprox. kg) Standard ccessories 20 ~ 70 C 0 ~ 70 C mbient room temperature+5 ~ 70 C ±0.2 ~ ±0.4 C ±0.05 ~ ±0.2 C ±0.1 ~ ±0.2 C Liquid expansion thermostat PI control Thermostat nalog (ial) igital (1/10 C) 800 W Propeller type 105x350x205 130x200x250 8-40 mm igital 130x200x240 (Includes heating element height) *Max. flow rate 2.5 L/min, Max. output 1m (60 Hz) **For operation below ambient temperature, please use in combination with immersible cooling unit (sold separately). nalog (ial) 1 kw Jet type** 105x400x235 2.5 kg 3 kg 2.8 kg 4 kg Thermometer (1) Thermometer (1) CONSTNT TEMPERTURE UNITS TB103, TBP105, TBP127 Easy to read backlit LC display; clear commands and quick setup Self-diagnostics program and a variety of safety features insure that samples and water bath will be protected from sudden unexpected in heating conditions isplay/keyboard panel swivels 180 degrees allowing freedom in mounting location. Model TB103 TBP105 TBP127 Programmable Range* 0 ~ 100 C -30 ~ 100 C 0 ~ 180 C Temp. Control Range mbient temperature+5 ~ 100 C mb.+5 ~ 180 C ccuracy ±0.2 ~ ±0.4 C ±0.05 ~ ±0.2 C ±0.05 ~ ±0.4 C Pump Maximum Flow Rate 10L/min (60 Hz) 15 L/min (60 Hz) bility Maximum Output 1.8 (60 Hz) 3.5 m (60 Hz) PI control Temperature djustment 10-key digital entry and display Timer Function uto-shutoff; Max. time: 11 hr. 59 min. 59 sec. 1 kw 1.2 kw Circulator Type Propeller type Jet type Clamping Width 8-40 mm Overall imensions (WxxH, in mm) 140x235x440 (includes heating element height) Weight (pprox. kg) 5 kg 6 kg *For operation below ambient temperature, please use in combination with immersible cooling unit (sold separately). Optional ccessories ccessory escription Model Max. Temperature Size isplay panel pivots for easy viewing TB103 TBP105R+TB000180 +TBP000190 crylic water Bath Polyproplyene Stainless Steel Stainless Steel Lids for TB000180 TB000170 TB000150 For use up to 50 C For use up to 70 C TB000160 For use up to 180 C TB000180 For use up to 180 C TB000190 Set of 4 400x300x200 460x305x160 450x300x155 500x300x200
IMMERSION TYPE COOLERS TBC120, TBC120, TBC230, TBC230, TBC370, TBC370 Easy to operate TBC- digital series features high accuracy temperautre control (to about ). igital models feature immersible temperature sensor as a standard accessory. Compact design suitable for benchtops; easy to move. Compatible for use with constant temperature immersion units (TB and TBP series) for increased accuracy in temperature regulation Flexible cooling element is suitable for a variety of containers. Model TBC120 TBC120 TBC230 TBC230 TBC370 TBC370 Operating Range Refrigerating bility Temperature Sensitivity Refrigerating Unit Cooling Element (narrow type) Overall imensions (WxxH, in mm) Weight (pprox. kg) Standard ccessories -20 C ~ mbient Room Temp. 120W at 0 C igital Pt 100Ω Fixed Sensor -25 C ~ mbient Room Temp. 228W at 0 C 75W 140W 300W Flexible SUS ø15x500 mm Flexible SUS ø15x600 mm Flexible SUS ø15x1000 mm 15 igital Pt 100Ω 260X400X250 Fixed Sensor -30 C ~ mbient Room Temp. 374W at 0 C 20 igital Pt 100Ω Fixed Sensor TBC120 TBC230 Optional ccessories - Wide-type Spiral Cooling Element Compatible Model TBC120/, TBC230/ TBC370/ Size ø60x150 mm ø60x180 mm Please specify if you would like the the "wide type" cooling element when ordering. 6723 Sierra Court, Suite, ublin, California 94568 U.S.. Tel (925) 479-0625, 800-334-7132, Fax (925)479-0630 www.advantecmfs.com