Product Catalogue. Issue 4.000

Product Catalogue 2014 Issue 4.000

K GM FI R E & S EC U R I TY DI S TR I BU TI O N 2 KGM Fire & Security Distribution Ltd, Unit A4, Spectrum Business Centre, Medway City Estate, Rochester Kent ME2 4NP

Welcome An introduction to KGM Fire and Security Distribution. KGM Fire and Security Distribution Ltd was born from a name change in September 2012. Previously known as Global Fire Equipment Ltd we specialized in the supply of the GFE range of conventional and addressable fire alarm equipment. As a family run business, Global Fire Equipment Ltd was originally formed in 1999 by myself & my wife Jenny with the aim of promoting the GFE range of equipment (now located in Portugal). After a couple of year s successful growth our daughter Kelly joined the team to take care of accounts and admin. A little further down the line and our second daughter Gemma joined the team in a production role, but more recently handling technical support on the GFE range. Following the demands of our continued expansion, Kelly s husband Michael joined us in September 2010 to manage stores & dispatch and later our trade counter which we opened in October 2011. The change of name came about as we decided to extend our product range to encompass more manufacturers enabling us to supply our customers with a greater choice of equipment. We are now able to supply Fire Control Panels from six manufacturers, detection from six manufacturers and a host of related equipment from over forty other manufacturers and suppliers. We will continue to source products that assist our customers in their efforts within today s tight budgets. If you require a particular product which is not in our catalogue, mention it to one of our team and we will do our best to source it for you: if there is further demand we will then make it a stock item. We are an experienced & knowledgeable customer focused team that consistently strives to deliver above our customer s expectations. We know how important your job is and we will do our utmost to give you the back up and support you require. Our extensive knowledge of products available on the market today helps us to point you in the right direction when you are faced with a problem that needs solving. What really sets us above the rest is the fact that we do not merely want customers, we want relationships with the people and companies that use our services and we keep our customers informed & up to date of any changes, updates or problems that arise. It is very simple: We do what we say we will do and we do it well. Martin Wilson 3 Phone: 01634 716882 Fax: 01634 711557 www.kgmfireandsecurity.co.uk

K GM FI R E & S EC U R I TY DI S TR I BU TI O N Contents Conventional Fire Systems 6 Global Fire Equipment 6 C-Tec 7 Haes 8 Kentec 9 Apollo 10 Hochiki 11 Nittan 12 Cranford Controls 13 Addressable Fire Systems 14 Global Fire Equipment 14 C-Tec 16 Advanced Electronics 17 Kentec 18 Apollo Fire 19 Hochiki 20 Nittan Zeta alarm Systems 21 Zeta alarm Systems 22 Specialist Fire Equipment 23 Fire Fighting Enterprises 23 The Fire Beam Company 23 C-Tec Voice Evacuation Systems 24 C-Tec Sigtel 25 4 KGM Fire & Security Distribution Ltd, Unit A4, Spectrum Business Centre, Medway City Estate, Rochester Kent ME2 4NP

Ancillary Fire Equipment 26 Common Ancillary Devices 26 Power Supply Units 26 Door Hold Magnets 27 Covers, Cages and Bells 27 Miscellaneous Equipment 28 Consumables 28 Tools 29 Detector Testers 30 Emergency Lighting 31 Emergency Signs 32 Fire Extinguishers 32 Healthcare Systems 33 C-Tec Call Systems - Conventional 33 C-Tec Call Systems Addressable 34 C-Tec Induction Loop Systems 35 Security Systems 36 Access Control Systems 36 CCTV Systems 37 Intruder Alarm Systems 38 5 Phone: 01634 716882 Fax: 01634 711557 www.kgmfireandsecurity.co.uk

K GM FI R E & S EC U R I TY DI S TR I BU TI O N Conventional Fire Systems Building on a long tradition of excellence in the field of Fire Alarm Control Panels, Global Fire Equipment is now a world player supplying customers across 64 countries with systems installed in premises ranging from major airports to an Antarctic research base. Based in Portugal, GFE designs, manufactures and exports a complete range of Fire Detection Products and puts customer satisfaction at the top of its priorities. The ORION conventional control panel range offers a creatively designed and visually pleasing solution for smaller cost-conscious projects requiring simplicity of operation. Versions available include 2, 4 and 8 zone panels and two styles of repeater. Programmable features included as standard in the panel range contradict the facilities commonly available in this type of panel and include: programmable time delay selectable for each zone, Day/Night mode control of time-delays, selectable nonlatching zone operation and selectable zone-pairing coincidence detection. Operation is intuitive offering simple controls, one-button disablement facilities and one man test mode. The GFE-C series of conventional devices have been designed to be fully compatible with the GFE conventional control panel range and include optical smoke detection, heat detection, manual call points, sounders & visual indication beacons, and an advanced addressable interface board that allows the conventional system to interface as an addressable point to a Global Fire Equipment addressable system. Advanced optical chamber design and independent EN54 certification ensure that the range is suitable for most applications. OR-02 GFE Orion 2 zone conventional control panel 118.20 OR-04 GFE Orion 4 zone conventional control panel 131.20 OR-08 GFE Orion 8 zone conventional control panel 145.60 OR-REP GFE Orion conventional repeater panel 110.00 OR-MINI-REP GFE Orion conventional mini repeater panel 138.00 OR-INT-RS232 GFE Orion RS232 interface for control panel 30.00 GFE-MPX-REL-4 GFE Orion 4 zone relay card 19.50 GFE-MPX-REL-8 GFE Orion 8 zone relay card 28.90 GFE-S-2L GFE Conventional optical smoke detector 14.70 GFE-H-2L GFE Conventional heat detector 10.26 GFE-B Conventional detector diode base 2.80 BGU-KAC KAC conventional manual call point, with back box 11.80 MCPC-KAC-IP67 KAC conventional manual call point IP67, with back box. 116.10 VALKYRIE-CS GFE Valkyrie conventional wall mount sounder with base, red or white. 18.50 VALKYRIE-CSB GFE Valkyrie conventional wall mount sounder beacon with base, red or white. 29.24 VALKYRIE-CB GFE Valkyrie conventional wall mount beacon with base, red or white 18.50 VULCAN-2-CS GFE Vulcan 2 conventional base sounder with blanking lid, white 14.56 VULCAN-2-CSB GFE Vulcan 2 conventional base sounder beacon with blanking lid, transparent 25.00 VULCAN-2-CB GFE Vulcan 2 conventional base beacon with blanking lid, transparent 14.56 Also available in the VOX VOICE SOUNDER range please ask for details 6 KGM Fire & Security Distribution Ltd, Unit A4, Spectrum Business Centre, Medway City Estate, Rochester Kent ME2 4NP

CFP Conventional Fire Panels C-TEC's award-winning CFP conventional fire panel is LPCB certified to the latest revisions of EN54 parts 2 and 4 and offers an array of user and installer-friendly features. Supplied in an attractive flush or surface mountable plastic enclosure, 2, 4 and 8 zone versions are available, each featuring four conventional sounder circuits, class change and alert inputs, on-board fire and fault relays and combined keypad/keyswitch entry. A wide range of engineering functions are also provided including selectable zone delays, coincidence and non-latching zone facilities. Comprehensive test and fault finding facilities are also provided. LPCP certified to EN54 Parts 2 and 4 Integral 1.5A switch mode PSU Fire and fault relays Class-Change and Alert inputs Dual purpose Flush or Surface housing End Of Line units included CFP702-4 CFP Standard 2 zone panel, LPCP approved 151.80 CFP704-4 CFP Standard 4 zone panel, LPCP approved 172.50 CFP708-4 CFP Standard 2 zone panel, LPCP approved 247.30 CFP702E-4 CFP Economy 2 zone panel 134.60 CFP704E-4 CFP Economy 4 zone panel 149.90 CFP708E-4 CFP Economy 8 zone panel 207.00 CFP760 CFP 8 zone repeater panel, max 8 per system 220.70 CFP761 CFP network driver card for main panel if repeaters required 74.80 CFP762 CFP relay output card, reset / fault / aux / remote 55.20 CFP763 CFP relay output card, reset / fault / aux / remote / 8z relays 84.30 CFP764 CFP relay output card, 8z relays 56.20 CFP765 CFP relay output card, 4z relays 49.50 CFP766 CFP relay output card, 2z relays 42.80 S-KEY Spare Key 3.40 C4416 Activ Conventional Optical Smoke Detector 18.00 C4403A1R Activ Conventional A1R 57 Heat Detector 15.00 C4403B Activ Conventional B 85 Heat Detector 15.00 C4408D Activ Diode Base 3.10 CFP702-2 CFP Alarmsense 2 zone 2-wire control panel 207.00 CFP704-2 CFP Alarmsense 4 zone 2-wire control panel 261.10 CFP708-2 CFP Alarmsense 8 zone 2-wire control panel 314.00 CFP760 CFP 8 zone repeater panel, code entry 220.70 CFP761 CFP/XFP network driver card, 1 per system fitted at main panel. 74.80 7 Phone: 01634 716882 Fax: 01634 711557 www.kgmfireandsecurity.co.uk

K GM FI R E & S EC U R I TY DI S TR I BU TI O N Haes Systems is one of the UK's leading companies for the supply and manufacture of fire alarm products. With almost 40 years in the industry, we offer our customers an integrated solution tailored to your specific fire detection and alarm system requirements. We have a large in-house team of design engineers and production operatives working on the latest in fire detection technology. We manufacture hundreds of items including the Eclipse and Excel conventional ranges of control panels. All Haes products are designed and manufactured in the UK. As all our products are put through a rigorous triple testing process during production, they carry a 3 year warranty as standard. Haes are ISO9001 Certified and we hold a number of accreditations from industry governing bodies including BAFE, LPCB and BSI. ECL-2 Eclipse 2 zone conventional control panel 277.50 ECL-4 Eclipse 4 zone conventional control panel 330.00 FMK-ECL Eclipse Flushing Bezel 72.75 XLEN-2 Excel-EN 2 zone conventional control panel 397.50 XLEN-4 Excel-EN 4 zone conventional control panel 457.50 XLEN-6 Excel-EN 6 zone conventional control panel 532.50 XLEN-8 Excel-EN 8 zone conventional control panel 555.00 Panels are also available in 12,16,24 & 32 zones XLEN-R-12 Excel-EN 2-12 zone fully functional or passive repeater panel 345.00 FBUS16-4-0 Fusion 16 zone, 4 radial, 0 loop panel 675.00 FBUS16-4-1 Fusion 16 zone, 4 radial, 1 loop panel 918.76 FBUS16-4-2 Fusion 16 zone, 4 radial, 2 loop panel 1331.26 FBUS16-4-4 Fusion 16 zone, 4 radial, 4 loop panel 2156.26 8 KGM Fire & Security Distribution Ltd, Unit A4, Spectrum Business Centre, Medway City Estate, Rochester Kent ME2 4NP

Kentec Electronics Ltd Established over 25 years ago Kentec's original philosophy has not changed: To offer customers excellent products, a comprehensive range and unrivalled, quality service. To achieve these goals Kentec has planned and implemented a continuous improvement policy throughout all areas of the business. Product development and investment in state of the art plant & machinery have been key contributors to this cause. Kentec supplies product independently tested and approved to EN54 parts 2 & 4, EN12094 part 1, UL and FM. Our management systems are approved to BS EN ISO 9001:2008. Kentec achieved 'Investors in people' accreditation in 2004. In 2007 accreditation to the international environment management standard BS EN ISO14001:2004 was achieved. In 2009 we were granted the Royal Warrant of Appointment by Her Majesty the Queen in recognition of our status as an official supplier of Fire Detection Equipment to the Royal Household Kentec offers the most comprehensive range of conventional, analogue addressable fire detection and extinguishant control panels available. K11020 M2 Sigma CP 2 zone conventional control panel surface mount 225.00 K11040 M2 Sigma CP 4 zone conventional control panel surface mount 268.80 K11080 M2 Sigma CP 8 zone conventional control panel surface mount 306.40 T11020 M2 Sigma CP 2 zone 2-wire control panel surface mount 263.80 T11040 M2 Sigma CP 4 zone 2-wire control panel surface mount 300.00 T11080 M2 Sigma CP 8 zone 2-wire control panel surface mount 347.80 KA11020 M2 Sigma CP-A Alarmsense 2 zone control panel surface mount 263.80 KA11040 M2 Sigma CP-A Alarmsense 4 zone control panel surface mount 300.00 KA11080 M2 Sigma CP-A Alarmsense 8 zone control panel surface mount 343.80 E01020 L2 Sigma CP-R 2 zone repeater panel 24V surface mount 158.20 E01040 L2 Sigma CP-R 4 zone repeater panel 24V surface mount 178.20 E01080 L2 Sigma CP-R 8 zone repeater panel 24V surface mount 235.00 K01020 M2 Sigma CP-R 2 zone repeater panel 230V surface mount 248.20 K01040 M2 Sigma CP-R 4 zone repeater panel 230V surface mount 268.20 K01080 M2 Sigma CP-R 8 zone repeater panel 230V surface mount 325.00 9 Phone: 01634 716882 Fax: 01634 711557 www.kgmfireandsecurity.co.uk

K GM FI R E & S EC U R I TY DI S TR I BU TI O N Apollo Fire Detectors Ltd are one of the world's leading manufacturers of fire detection solutions for commercial and industrial applications with products designed to save lives and protect property from the risk of fire. Innovation drives the company's product development programme, with continuous exploration of new technologies helping to deliver leading-edge fire detection solutions. Apollo offers five distinct ranges, including analogue addressable and conventional fire detection devices, as well as a host of ancillary products such as sounders, visual indicators and manual call points. Apollo holds in excess of 3,000 product approvals worldwide as well as a number of internationally recognised quality and environmental awards. The Series 65 range of conventional detectors incorporates well-proven sensing technologies, together with advances in materials and electronics technology. A wide operating voltage of 9 to 33V DC means that Series 65 detectors can be integrated into security systems when used with a relay base. The advanced Orbis range of conventional detectors has been developed with sophisticated technology previously only found in intelligent detectors. With modern styling the range incorporates a mounting base which saves installation time. Two-wire AlarmSense has been developed to make the design and installation of a fire detection and alarm system easier and more economic for small to medium sized buildings. The range also allows an existing system to be extended or modified if necessary. This flexibility makes AlarmSense an excellent choice for use in Houses in Multiple Occupation (HMO's) and other similar applications. 55000-317APO Series 65 Optical Smoke Detector Standard 20.46 55000-217APO Series 65 Ionisation Smoke Detector Standard 26.66 55000-220APO Series 65 Integrating Ionisation Smoke Detector 36.36 55000-122APO Series 65 A1R Heat Detector Standard 15.66 55000-127APO Series 65 BR Heat Detector Standard 15.66 55000-132APO Series 65 CR Heat Detector Standard 15.66 55000-137APO Series 65 CS Heat Detector Standard 15.66 45681-200APO Series 65 Standard Base 3.00 45681-201APO Series 65 Diode Base 3.38 55100-001APO Series 65 Indoor Manual Call Point no LED - Red 13.00 55200-003APO Series 65 Outdoor Manual Call Point 64.50 ORB-OP-12001-APO Orbis Optical Detector 19.96 ORB-OH-13001-APO Orbis Multisensor Detector 25.00 ORB-HT-11166-APO Orbis Class A1S Heat Detector 15.16 ORB-HT-11001-APO Orbis Class A1R Heat Detector 15.16 ORB-HT-11002-APO Orbis Class A2S Heat Detector 15.16 ORB-HT-11003-APO Orbis Class BR Heat Detector 15.16 ORB-HT-11004-APO Orbis Class BS Heat Detector 15.16 ORB-HT-11005-APO Orbis Class CR Heat Detector 15.16 ORB-HT-11006-APO Orbis Class CS Heat Detector 15.16 ORB-MB-00001-APO Orbis TimeSaver Base 3.40 ORB-DB-00003-APO Orbis TimeSaver Diode Base 3.50 ORB-BA-10008-APO S65 to Orbis Base Adaptor 6.88 55000-390APO AlarmSense Optical Smoke Detector 16.00 55000-391APO AlarmSense Integrating Optical Smoke Detector 17.50 55000-190APO AlarmSense A1R Heat Detector (Standard) 13.00 55000-193APO AlarmSense CS Heat Detector (High Temp) 13.26 45681-244APO AlarmSense Base 5.00 55000-835APO AlarmSense Alarm Relay 35.00 55000-018APO AlarmSense Open Area Sounder - Red 50.38 55000-017APO AlarmSense Open Area Sounder Beacon - Red 59.14 55000-035APO AlarmSense Open Area Beacon - Red 55.38 45681-510APO AlarmSense Sounder Base 25.14 45681-509APO AlarmSense Sounder Beacon Base 37.50 55200-894APO AlarmSense Manual Call Point 23.50 10 KGM Fire & Security Distribution Ltd, Unit A4, Spectrum Business Centre, Medway City Estate, Rochester Kent ME2 4NP

Hochiki Europe at present builds in excess of 500,000 fire detection products per year. By employing the latest manufacturing techniques and rigorous quality control to ISO 9001 and Environmental Management to ISO14001, Hochiki Europe ensures every product installed will continue to enhance Hochiki's name for long-term reliable fire detection. The CDX conventional device range includes optical smoke & heat detection, linear beam detection, manual call points and audio visual devices; all of which are fully compatible with the majority of existing Conventional systems. The SLR-E3N Optical Smoke Detector incorporates Hochiki s unique High Performance photoelectric smoke chamber removing the need to use Ionisation Detectors in the majority of applications. The smoke chamber is easily removed or replaced for cleaning and utilises a unique baffle design which allows smoke to enter the chamber whilst keeping out ambient light. Beam detectors include reflective and end-to-end types covering up to 100m length areas. Zone power may be used to simplify installation and operation. The audio visual range includes sounders and visual beacons in wall mount, base mount and weather-proof versions.. SLR-E3N Optical smoke detector 22.76 DCD-AE/3 Combined heat detector FT 60 o C + RoR (EN54 Class A1/A1R) 18.10 DCD-CE/3 Combined heat detector FT 90 o C + RoR (EN54 Class C/CR) 18.10 DFJ-AE/3 Fixed temperature heat detector 60 o C (EN54 Class A1/A1S) 18.10 DFJ-CE/3 Fixed temperature heat detector 90 o C (EN54 Class C/CS) 18.10 YBN-R/6 Standard base (No diode) 2.80 YBN-R/6SK Shottky diode base 3.90 YBO-R/6PA 2 Wire base 12.78 YBO-R/6R Latching relay mounting base 13.66 YBO-R/6RS Latching relay base with Schottky diode 14.96 CCP-SAVWIRE 2 Wire call point 14.30 CSB-E Sounder base 21.04 CSBB-E Sounder base beacon 61.28 CWSB-E Wall sounder beacon 58.34 11 Phone: 01634 716882 Fax: 01634 711557 www.kgmfireandsecurity.co.uk

K GM FI R E & S EC U R I TY DI S TR I BU TI O N The Nittan Group has been at the very forefront of the international fire protection industry since 1954 and has sales, R&D and manufacturing bases in Japan, China, Sweden, Bahrain and the UK. Nittan Europe was established in 1972 and has grown to become a major player in the fire protection industry. With the extensive support facilities of our Tokyo parent company, Nittan Europe now supplies in excess of 500,000 detectors per year, all of which are made to marine standard for exceptional quality. Our latest breed of sophisticated Evolution conventional fire detectors and ancillary products are sold worldwide. Using the scattered light principle inherent in optical detectors, the EVC-DP Dual Optical Detector goes one step further and uses both IR and blue LEDs to provide a more accurate measurement of particles within the chamber. By calculating the ratio of these light sources, which operate at different wavelengths, the EVC-DP can determine the particle size and thus distinguish between smoke and non-combustion products such as steam and dust. This patented, award winning technology is unique to Nittan and provides an excellent solution to false alarms in areas prone to steam and dust, including hotels, hospitals and other areas of multiple occupancy. The range also includes a versatile Dual Band Infra-Red Flame detector. The EVC-IR uses both Dual Wavelength and flicker frequency sensing techniques for maximum false alarm reduction and sensitivity to real flaming fires. Devices generally operate from a wide range of voltages for maximum compatibility and offer the unique Omniview 360 o indication LED. EVC-P Conventional Photoelectric Detector c/w 375 Ohm Resistor 17.50 EVC-DP Conventional Dual Photoelectric Detector c/w 375 Ohm Resistor 50.00 EVC-H-A2S Conventional Heat Detector 57-70 C c/w 375 Ohm Resistor 15.00 EVC-H-CS Conventional Heat Detector 84-100 C c/w 375 Ohm Resistor 15.00 EVC-IR Conventional Dual Band IR Flame Detector c/w 375 Ohm R 537.80 UB-4SD Standard Base c/w Diode for use with EV Conventional Detectors 3.00 STB-4SE-SW-EV SAVWIRE DEEP BASE - use with Conventional Detectors 12.00 UB-4 STANDARD BASE UNIVERSAL BASE - use with EV Conventional Detectors 2.50 IP55 Base Splashproof Base 25.00 Deckhead Mounting Box Mounting Box for IP55 Base 7.50 CPC-3 CONTROLLER Control Unit for OKB-3 425.00 0KB-3 Industrial Optical Smoke Detector 123.80 RP-RS-01/NTN Conventional Surface/Flush Mounting RESET Call Point (IP24) 15.00 RP-RSI-05/NTN Conventional Sav-Wire Surface/Flush Mounting RESET Call Point 17.50 WRP-R-01 Conventional Waterproof RESET Call Point (IP67) 98.80 NBM-06 6" Bell, 24V d.c., 30mA 23.20 NBM-08-WP 8" Bell, 24V d.c., Weatherproof c/w Gasket Box 73.70 Strobell Strobe & Bell Unit 111.40 Banshee Conventional Wall Mounted Sounder Red 25.70 Banshee Conventional Wall Mounted Sounder Red IP65 26.90 Banshee Lite Conventional Wall Mounted Sounder/Beacon Red 58.20 Banshee Lite Conventional Wall Mounted Sounder/Beacon Red IP65 59.40 Xenon Conventional Wall Mounted Beacon Red 33.00 Banshee base Sounder Base 26.90 Banshee base cover plate Sounder Base Cover 1.80 12 KGM Fire & Security Distribution Ltd, Unit A4, Spectrum Business Centre, Medway City Estate, Rochester Kent ME2 4NP

Cranford Controls, established since November 1993, is a leading independent company located in Alton, Hampshire. Cranford offer a comprehensive high quality range of fire system and ancillary component products at competitive prices, designed and manufactured at their purpose built factory. As well as their own manufactured products Cranford also has a number of well established distribution agreements with manufacturers of complimentary products. Cranford is committed to providing quality, innovative products which consistently meet or exceed standards. Cranford Controls fire alarm and security solutions are sold worldwide through a highly experienced distribution network. We now have products installed in such places as Gatwick Airport and Wembley Stadium, and even used on cranes in Sweden. VTG-32-DB-R/W Vantage Spatial Sounder, IP65 deep base, 24V, 32 Tone, red or white 21.32 VTG-32E-DB-R/W Vantage Spatial Sounder, IP65 deep base, 24V, 32 Tone, EN54-3 approved, red or white 22.70 VTB-32-DB-RB/XL Vantage-Combi Sndr Bcn, IP65 dp bse, 24V, 32 Tone, red body, red amber blue or clear lens 44.34 VTB-32-DB-WB/XL Vantage-Combi Sndr Bcn, IP65 dp bse, 24V, 32 Tone, white body, red amber blue or clear lens 44.34 VXB-DB-RB/XL Vantage LED Beacon, IP65 deep base, 24V, 1 Hz, red body, red or amber lens 23.40 VXB-DB-WB/XL Vantage LED Beacon, IP65 deep base, 24V, 1 Hz, white body, red or amber lens 23.40 VCT-03-W/C Vector Platform Sounder, Base mount, 24V, 4 tone, white or ivory 20.46 VCT-03-W-CP-R/W Vector Cover Plate, red or white 2.86 VRS-1-R/W Vara Room Sounder, single gang enclosure, 24V, 4 Tone, red or white 18.12 VLS-1-R/W Vara Room Sounder with LED indication, single gang enclosure, 24V, 4 Tone, red or white 36.32 VRS-1-WFA Vara Room Sounder with LED indication, single gang enclosure, 24V, 4 Tone, FIRE ALARM 43.52 VPR-SA2-R/W Viper Spatial Sounder, 24V, 4 Tone, 103dB, red or white 19.50 VPR-SA4-R/W Viper Spatial Sounder, 24V, 4 Tone, 107dB, red or white 43.86 VBL-6-R/G 6 Motorised Bell, 24V, 94 db, red or grey 17.80 RUI-01 Remote Indicator, single gang, flush mount, back box not inc, white 6.70 RUI-01B Remote Indicator, single gang, surface mount, c/w back box, white 8.96 RUI-02 Remote Indicator, single gang, flush mount, back box not inc, white FIRE DETECTOR OPERATED 7.22 RUI-02B Remote Indicator, single gang, surface mount, c/w back box, white FIRE DETECTOR OPERATED 9.50 RUI-06 Remote Indicator, circular steel plate, flush mount, back box not inc, white 16.16 RIU-R24B Aux Relay, 24V DC, single gang, surface mount, c/w back box, white AUXILIARY RELAY OPERATED 21.84 R24-PCB Aux Relay, 24V DC, PCB only 14.30 R24-BOX Aux Relay, 24V DC, metal enclosure. 50.96 13 Phone: 01634 716882 Fax: 01634 711557 www.kgmfireandsecurity.co.uk

K GM FI R E & S EC U R I TY DI S TR I BU TI O N Addressable Fire Systems Building on a long tradition of excellence in the field of Fire Alarm Control Panels, Global Fire Equipment is now a world player supplying customers across 64 countries with systems installed in premises ranging from major airports to an Antarctic research base. Based Portugal, GFE designs, manufactures and exports a complete range of Fire Detection Products and puts customer satisfaction at the top of its priorities. The GFE addressable range includes the compact Junior control panel in 1 or 2 loop format and the Flagship Juno-Net range which is expandable from 1 to 96 loops and networkable to a wide variety of devices including repeater panels, sub-panels and pager systems. The Odyssey multi-language graphical alarm management software gives further system expansion capabilities allowing control of up to 64 Juno-Net networked systems. In the event that a fire or fault occurs, the location of the incident may be displayed on a PC monitor and with a few mouse clicks the display may be zoomed into the area of the incident. The JUNIOR control panel is a cost effective solution for small to medium sized installations. A surprisingly high level of functionality is available in this compact & engineer friendly panel as it shares the same advanced features of the high-end Juno-Net system, including PC configuration tools for programming and the communication technologies used for repeater panels. Multi-protocol device support is available but clear advantage exists in using the GFE loop communications protocol due to the wide range of ancillary devices & functions available. The JUNO-NET range of control panels are able to encompass the largest and most complex of projects with a fully expanded system capacity of up to 12,000 analogue addressable devices connected across 96 fully redundant loops. The dedicated network-communication ring supports RS422/485, fibre-optic & TCP/IP technologies and each network element has its own Fire Detection processing facility for distributed system integrity and to allow the main control panel free to handle the more advanced programming and operational functions. System programming flexibility is high with 384 detection zones, 512 sounder groups and 512 I/O groups. This allows advantage to be taken of the full potential of the Cause & Effect programming features and all likely scenarios to be met. JNR-V4-1 GFE Junior V4 1 lp addr control panel, expandable to 2 loops 476.20 JNR-V4-2 GFE Junior V4 2 lp addr control panel 562.80 JNR-V4-CARD GFE Junior V4 lp card 86.70 J-NET-EN54-SC-001 GFE Juno Net 1 lp addr control panel, EN54 housing 811.10 J-NET-EN54-SC-002 GFE Juno Net 2 lp addr control panel, EN54 housing 930.62 J-NET-EN54-SC-003 GFE Juno Net 3 lp addr control panel, EN54 housing 1,050.20 J-NET-EN54-SC-004 GFE Juno Net 4 lp addr control panel, EN54 housing 1385.50 J-NET-SC-00X GFE Juno Net 4 to 12 lp addr control panels, large housing POA J-NET-SPX-00X GFE Juno Net 1 to 9 lp addr sub panel (no display), blank housing POA JNR-REP GFE Junior repeater panel, includes 1 x RS485 interface 400.00 JNR-MINI-REP GFE Junior mini repeater panel, includes 1 x RS485 400.00 J-NET-EN54-REP GFE Juno Net EN54 repeater panel, includes 1 x RS485 interface 709.10 J-NET-485 GFE Juno Net RS485 interface board. 85.80 1-LC GFE Juno Net 1 loop card 154.90 2-LC GFE Juno Net 2 loop card. 309.70 3-LC GFE Juno Net 3 loop card. 464.70 CNTR-LEAD-KIT GFE Connector Software and lead programming kit 125.00 KEYBOARD GFE Compact PS2 keyboard for Juno and Juno Net control 69.60 14 KGM Fire & Security Distribution Ltd, Unit A4, Spectrum Business Centre, Medway City Estate, Rochester Kent ME2 4NP

The GFE-A series of analogue addressable devices have been designed to be fully compatible with the GFE addressable control panel range and include optical smoke detection, heat detection, manual call points, sounders & visual indication beacons, and wide range of interfacing modules. Designed by experienced fire systems engineers, giving simple & practical functionality, the independent EN54 certification ensures that the range is suitable for most applications. DIL switch binary allocation of device address removes the confusion of more complex schemes and allows the engineer to take complete control of the system. Part No. Description List Price GFE-AD-SL GFE Analogue addressable optical smoke detector, exc base 28.00 GFE-AD-HL GFE Analogue addressable heat detector, exc base 26.90 GFE-B GFE Addressable detector base 2.80 GFE-AD-ISO GFE Addressable loop isolator, circular housing. 20.40 GFE-B- AD-ISO GFE Addressable Isolator base. 20.30 MCPA-KAC GFE KAC Addressable manual call point, surface mount with back box 36.60 MCPA-STI-IP67 GFE Addressable manual call point, IP67, surface mount with back box 130.00 MAM-YELLOW GFE Manually Addressed Module for Sounders or Output. 15.50 MAM-WHITE GFE Manually Addressed Module for smoke or heat detectors 9.40 MAM-RED GFE Manually Addressed Module for Manual Call Points or Inputs 15.50 INPUT-RPB GFE Addressable input module, circular housing 22.50 I/O-RPB GFE Addressable input/output module, circular housing 26.50 I/O-1-C GFE Addressable input/output module, double gang housing 41.00 I/O-3-C GFE Addressable triple input/output module, double gang housing 52.90 I/O-MAINS GFE Addressable mains input/output module, double gang housing 56.80 LSC-ISO GFE Addressable loop sounder circuit module with isolator 34.90 ZMU GFE Addressable zone monitoring module 40.90 QUAD-ZMU GFE Addressable Quad zone monitoring module 109.80 VALKYRIE-AS GFE Valkyrie addressable wall mount sounder, inc base, red or white. 34.00 VALKYRIE-ASB GFE Valkyrie addressable wall mount sounder beacon, inc base, red or white. 44.70 VULCAN-2-AS GFE Vulcan 2 addressable base mount sounder 31.10 VULCAN-2-ASI GFE Vulcan 2 addressable base mount sounder with isolator 37.70 VULCAN-2-ASB GFE Vulcan 2 addressable base mount sounder beacon 42.20 VULCAN-2-ASBI GFE Vulcan 2 addressable base mount sounder beacon with isolator 48.80 VULCAN-2-AB GFE Vulcan 2 addressable base mount beacon 31.10 VULCAN-2-ABI GFE Vulcan 2 addressable base mount beacon with isolator 37.70 VULCAN-2-L GFE Vulcan 2 white blanking lid 2.00 VULCAN-2-LT GFE Vulcan 2 transparent blanking lid. 2.00 Also available in the VOX VOICE SOUNDER range please ask for details GFE-BCM-3-I/O (2.4A) GFE addressable 2.4A Power Supply inc inbuilt I/O module 129.52 GFE-BCM-3-I/O (1.7A) GFE addressable 1.7A Power Supply inc inbuilt I/O module 109.30 15 Phone: 01634 716882 Fax: 01634 711557 www.kgmfireandsecurity.co.uk

K GM FI R E & S EC U R I TY DI S TR I BU TI O N XFP Addressable Fire Panels The C-Tec XFP range of analogue addressable fire panels offer networking facilities if required. Fully LPCB approved to EN54 parts 2 & 4,the XFP is available in three different formats: 1 loop 16 zone, 1 loop 32 zone and 2 loop 32 zone. Up to eight XFP master panels (any variant) may be interconnected. The control panels are available in Apollo XP95 / Discovery and Hochiki ESP protocols. The panels include an improved user interface with colour-coded buttons and combined keypad / keyswitch entry. They come complete with 2 conventional sounder circuits, 2 programmable inputs, a fault relay output and 3 programmable relay outputs. A maximum of eight XFP main panels may be connected onto a 2-wire RS485 network, or up to 8 XFP repeaters onto any non-networked main panel. Engineering functions include zone test, programmable delays and coincidence detection, day/night modes, phased evacuation, earth fault monitoring, contamination level reporting, event log and PC programming. The C-Tec Hush Button may be looked on as a miniature fully monitored, self-powered single zone fire alarm panel that sits and is addressed on an analogue addressable loop with the ability to communicate its status back to the host fire panel. Typically one double gang Hush Button is fitted in each apartment/hmo dwelling complete with conventional detectors and sounders to provide occupants with a simple, cost-effective means of invoking two types of hushed period, as specified in clause 12.2 of BS 5839 part 6. The whole system is geared towards reducing unwanted alarms by putting HMO occupants firmly in control of their own fire detection systems without losing sight of the fact its primary purpose is to protect life and property. Full compliance with EN54 parts 2 and 4 Compatible with Hochiki s ESP and Apollo s XP95 and Discovery protocols Two independently programmable conventional sounder circuits Two programmable inputs One fault output relay and three programmable relay outputs with volt free changeover contacts Day/night (building occupied/unoccupied) function changes detector sensitivity (high/low) and zone dependency settings Investigation delay period function (programmable for length of time) Individual sensitivity settings for each device Windows based loader PC program for system configuration XFP501E XFP Networkable single loop 16 zone control panel 429.10 XFP501 XFP Networkable single loop 32 zone control panel 592.30 XFP502 XFP Networkable two loop 32 zone control panel 747.30 XFP510-16 XFP Networkable repeater panel, 16 zone, all protocols 402.00 XFP510-32 XFP Networkable repeater panel, 32 zone, all protocols 587.40 CFP761 CFP/XFP network card for XFP 16 zone panels, all protocols 71.00 AFP711 CFP/XFP network card for XFP 32 zone panels, all protocols 157.60 AFP385 Flush mount bezel for XFP 32 zone master & repeat panels 49.00 AFP709 XFP printer kit, lead & socket, not compatible with 16z pnls. 667.90 XFP507 XFP up/dnld software, Win 2000/XP/Vista, c/w SAF7070000 lead. 154.00 SAF7070000 2m programming lead 27.52 XFP508H BS5839-6 Hush Button, Hochiki ESP, Double gang housing. 124.30 XFP508X BS5839-6 Hush Button, Apollo XP95 / Discovery, Double gang 124.30 housing. XFP508X/SS BS5839-6 Hush Button, Apollo XP95 / Discovery, Double gang housing, Stainless Steel POA 16 KGM Fire & Security Distribution Ltd, Unit A4, Spectrum Business Centre, Medway City Estate, Rochester Kent ME2 4NP

Established in 1999, Advanced Electronics manufactures analogue addressable fire and emergency lighting control panels and exports to more than 60 countries around the world. Our dedication to research and new product development incorporates industry best practice and is your assurance of a wide choice of innovative, high quality products, fully compliant with all the necessary industry safety standards and legislation, and supported by excellent customer care. Our success is based on a strong and highly customer focussed strategy, driven by a team of experienced industry professionals who are sensitive to customer needs. All our products are manufactured at a state of the art production facility in Northumberland, which also houses our head office operations. Our research and development offices in S Yorkshire also include training and conference facilities and both sites are supported by satellite sales operations around the UK. The MX-4000 series of analogue addressable fire alarm control panels were the first panels to receive EN54 approval from the British Standards Institute (BSI) and proudly bear the internationally recognised quality Kite Mark. The full range, from 1 to 8 loops, has been approved for use with Apollo, Argus Vega, Hochiki and Nittan devices. An extensive range of peripherals is available for the MX-4000, including input / output modules, printers and a variety of graphical indication units, together with easy to use software for programming, diagnostics and control. The MX-5000 is the next generation of analogue addressable fire alarm control panels and has been developed following extensive research involving industry professionals, customers and end users. Designed to be flexible & powerful with an intuitive user interface, each panel has a high resolution LCD display with hightactile feedback membrane keypad. This combination provides a concise menu based, high resolution graphical user interface with simple select and click programming to aid configuration and end user operation. An extensive range of peripherals is available including input/ output modules, printers, remote terminals, programming software, diagnostic & control software. MX4100S 1 loop panel, not extendable, not networkable 762.50 MX4100 1 loop analogue addressable 975.00 MX4201 1 loop panel extendable to 2 loops (1 loop card fitted & tested) 1,255.50 MX4202 2 loop panel (2 loop cards fitted & tested) 1,431.00 MX4401 1 loop panel extendable to 4 loops (1 loop card fitted & tested) 1,762.50 MX4402 2 loop panel extendable to 4 loops (2 loop cards fitted & tested) 1,938.00 MX4403 3 loop panel extendable to 4 loops (3 loop cards fitted & tested) 2,136.00 MX4404 4 loop panel (4 loop cards fitted & tested) 2,289.00 MX4802 2 loop panel extendable to 8 loops (2 loop cards fitted & tested) 4,350.00 MX4803 3 loop panel extendable to 8 loops (3 loop cards fitted & tested) 4,525.50 MX4804 4 loop panel extendable to 8 loops (4 loop cards fitted & tested) 4,701.00 MX4805 5 loop panel extendable to 8 loops (5 loop cards fitted & tested) 4,876.50 MX4806 6 loop panel extendable to 8 loops (6 loop cards fitted & tested) 5,052.00 MX4807 7 loop panel extendable to 8 loops (7 loop cards fitted & tested) 5,227.50 MX4808 8 loop panel (8 loop cards fitted & tested) 5,403.00 MXP-024F 20 zone LED card for MX-4100 - fitted 57.80 MXP-025F 20 zone LED card for MX-4200/4400/4800 - fitted 57.80 MXP-013-050F 50 zone LED card for MX-4200/4400/4800 - fitted 225.00 MXP002 Loop driver for MX-4400/4200 (Apollo or Hochiki protocol) 165.00 MX4010 Remote display terminal with standard network interface, 24V DC 592.50 MX4020 Remote control terminal with standard network interface, 24V DC 742.50 MX4010/FT Remote display terminal with fault-tolerant network interface, 24V DC 1,155.00 MX4020/FT remote control terminal with fault-tolerant network interface, 24V DC 1,305.00 MXP003 Standard network card 225.00 MXP009 Fault tolerant network card 562.50 MXP012F On board printer for MX-4200/4400/4800 - Fitted 375.00 PCNET003USB MX-4000 series configuration software & USB upload/download lead 165.00 PCNET004 MX-4000 series remote dial-up software (Virtual panel) 576.00 PCNET007 MX-4000 series logo programming software 112.50 UP001 RS232 9-way to 3-way plug in connector (MX upload/download lead) 30.00 MX5101 1 loop panel 1,053.00 MX5201 1 loop panel extendable to 2 loops (1 loop card fitted & tested) 1,353.00 MX5202 2 loop panel (2 loop cards fitted & tested) 1,545.00 MX5010 Remote display terminal 637.50 MX5020 Remote control terminal - small 787.50 MX5010/FT Remote display terminal - fault tolerant 1,200.00 MXP502 MX-5000 loop driver card 192.00 MXP503 MX-5000 network card - standard 225.00 MXP509 MX-5000 network card - Fault tolerant 562.50 17 Phone: 01634 716882 Fax: 01634 711557 www.kgmfireandsecurity.co.uk

K GM FI R E & S EC U R I TY DI S TR I BU TI O N Kentec Electronics Ltd Established over 25 years ago Kentec's original philosophy has not changed: To offer customers excellent products, a comprehensive range and unrivalled, quality service. To achieve these goals Kentec has planned and implemented a continuous improvement policy throughout all areas of the business. Product development and investment in state of the art plant & machinery have been key contributors to this cause. Kentec supplies product independently tested and approved to EN54 parts 2 & 4, EN12094 part 1, UL and FM. Our management systems are approved to BS EN ISO 9001:2008. Kentec achieved 'Investors in people' accreditation in 2004. In 2007 accreditation to the international environment management standard BS EN ISO14001:2004 was achieved. In 2009 we were granted the Royal Warrant of Appointment by Her Majesty the Queen in recognition of our status as an official supplier of Fire Detection Equipment to the Royal Household Kentec offers the most comprehensive range of conventional, analogue addressable fire detection and extinguishant control panels available. LA81161 M2 Syncro AS Lite 1 loop Panel 16 zones surface mount no keyswitch 555.00 LA80161 M2 Syncro AS Lite 1 loop Panel 16 zones surface mount with keyswitch 623.80 A81161 M2 Syncro AS 1 loop Panel 16 zones surface mount no keyswitch 698.80 A80161 M2 Syncro AS 1 loop Panel 16 zones surface mount with keyswitch 749.00 A81162 M2 Syncro AS 2 loop Panel 16 zones surface mount no keyswitch 1042.40 A80162 M2 Syncro AS 2 loop Panel 16 zones surface mount with keyswitch 1093.80 ENSA63162 03 Syncro 2 loop Panel 16 zones surface mount with keyswitch no printer 1500.00 ENSA63162 03P Syncro 2 loop Panel 16 zones surface mount with keyswitch & printer 1816.26 ENSA63482 03 Syncro 2 loop Panel 48 zones surface mount with keyswitch no printer 1582.50 ENSA63482 03P Syncro 2 loop Panel 48 zones surface mount with keyswitch & printer 1900.00 ENSA63164 03 Syncro 4 loop Panel 16 zones surface mount with keyswitch no printer 1983.12 ENSA63164 03P Syncro 4 loop Panel 16 zones surface mount with keyswitch & printer 2300.00 ENSA63484 03 Syncro 4 loop Panel 48 zones surface mount with keyswitch no printer 2066.26 ENSA63484 03P Syncro 4 loop Panel 48 zones surface mount with keyswitch & printer 2383.12 ENK61160 03 Syncro Response repeater panel 16 zones surface mount no printer 1433.12 ENK61480 03 Syncro Response repeater panel 48 zones surface mount no printer 1516.26 K552/A/H Loop Extension Card (Loops 3 & 4, Apollo/Hochiki) 491.26 K555 Syncro fault tolerant network interface card 315.00 18 KGM Fire & Security Distribution Ltd, Unit A4, Spectrum Business Centre, Medway City Estate, Rochester Kent ME2 4NP

Apollo Fire Detectors Ltd are one of the world's leading manufacturers of fire detection solutions for commercial and industrial applications with products designed to save lives and protect property from the risk of fire. Innovation drives the company's product development programme, with continuous exploration of new technologies helping to deliver leading-edge fire detection solutions. Apollo offers five distinct ranges, including analogue addressable and conventional fire detection devices, as well as a host of ancillary products such as sounders, visual indicators and manual call points. Apollo holds in excess of 3,000 product approvals worldwide as well as a number of internationally recognised quality and environmental awards. The XP95 range of analogue addressable fire detectors is advanced in design, improved in performance and has unique features that benefit the installer and the end user. The detectors have been carefully researched and developed by the Apollo design team and the range has undergone rigorous testing to ensure that it meets not only European and other standards but also the demands of today's high technology environments. XP95 detectors provide an alarm facility that automatically puts an alarm flag on the data stream and reports its address when the pre-set EN54 thresholds are exceeded. Discovery is a range of high specification analogue addressable fire detectors which is designed to meet specifications for detectors incorporated in sophisticated systems, with an additional dimension in fire protection capability. The Discovery communications protocol is a development of the proven XP95 protocol, making both ranges of detector compatible with control panels from many different manufacturers. The unique XPERT card addressing method provides simple, user friendly and accurate identification of detector location. A coded XPERT card is inserted in the base which may then be read by any XP95 (or Discovery) detector once it is plugged in. Using this method, all the electronic components are in the detector but the location information is held in the base, avoiding accidental movement of address locations. The XPERT card simplifies & speeds up installation & commissioning and addressing errors during maintenance and service are reduced. 55000-600APO XP95 Optical Smoke Detector 39.90 55000-500APO XP95 Ionisation Smoke Detector 54.44 55000-400APO XP95 Heat Detector Standard 39.64 55000-401APO XP95 Heat Detector High Temperature 39.64 55000-885APO XP95 Multi-sensor Detector 47.50 55000-720APO XP95 Isolator 21.50 45681-210APO XP95 Mounting Base 2.80 45681-284APO XP95 Isolating Base 12.76 45681-242APO XP95 Low Power Relay Base 18.76 45681-209APO XP95 Deep Base 3.76 45682-127APO Pre-Addressed XPERT Cards, Full Set (1-126) 47.26 38531-771 Blank XPERT Card 0.50 55200-908APO XP95 Manual Call Point with Isolator - Red (Surface) 42.88 58200-951APO Waterproof Manual Call Point with Isolator 121.00 45681-277APO Integrated Base Sounder with Isolator 42.26 45681-330APO Sounder Beacon Base with Isolator 66.64 45681-333APO Beacon Base with Isolator 42.26 55000-877APO Loop-Powered Beacon Red 46.08 55000-878APO Loop-Powered Beacon Clear 50.64 55000-879APO Loop-Powered Beacon Amber 57.46 55000-001APO Intelligent Open-Area Sounder Red (Sonos) 52.40 55000-002APO Intelligent Open-Area Sounder White (Sonos) 52.40 55000-005APO Intelligent Open-Area Sounder Beacon Red (Sonos) 78.98 55000-006APO Intelligent Open-Area Sounder Beacon Clear (Sonos) 78.98 55000-009APO Intelligent Open-Area Beacon Red (Sonos) 48.60 55000-010APO Intelligent Open-Area Beacon White (Sonos) 48.60 55000-278APO Multi-Tone Open-Area Sounder Red 70.14 55000-279APO Multi-Tone Open-Area Sounder White 70.14 55000-274APO Multi-Tone Weatherproof Open-Area Sounder Red 153.66 55000-275APO Multi-Tone Weatherproof Open-Area Sounder White 153.66 55000-293APO Multi-Tone Open-Area Sounder Beacon Red with Isolator 100.76 55000-294APO Multi-Tone Open-Area Sounder Beacon White with Isolator 100.76 55000-298APO Weatherproof MultiTone Open-Area Sounder Beacon Red Isolator 178.70 55000-299APO Weatherproof MultiTone Open-Area Sounder Beacon White Isolator 178.70 55000-847APO XP95 Input/Output Unit with Isolator 71.08 55000-588APO XP95 Three Channel Input/Output Unit with Isolator 116.28 55000-849APO XP95 Output Unit with Isolator 60.98 55000-843APO XP95 Switch Monitor with Isolator 58.58 55000-841APO XP95 Switch Monitor Plus with Isolator 67.30 55000-760APO Mini Switch Monitor 52.66 55000-864APO XP95 Locally Powered Zone Monitor Unit with Isolator 76.12 55000-845APO XP95 Zone Monitor Unit with Isolator 63.50 55000-852APO XP95 Sounder Control Unit with Isolator 81.06 55000-875APO XP95 Mains Switching Input/Output Unit 81.06 All XP95 and Discovery parts are available so if the item you require is not shown, please call 19 Phone: 01634 716882 Fax: 01634 711557 www.kgmfireandsecurity.co.uk

K GM FI R E & S EC U R I TY DI S TR I BU TI O N Hochiki Europe at present builds in excess of 500,000 fire detection products per year. By employing the latest manufacturing techniques and rigorous quality control to ISO 9001 and Environmental Management to ISO14001, Hochiki Europe ensures every product installed will continue to enhance Hochiki's name for long-term reliable fire detection. The Enhanced Systems Protocol (ESP) analogue addressable device range is based on proven RS232 serial communications technology with optimised voltage and current levels for transiting and receiving data at 24V. A number of control panel manufactures produce panels suitable for use with Hochiki ESP protocol devices. Device includes optical smoke & heat detection, linear beam detection, manual call points, interface modules and audio visual devices. The ACA-E Multi Sensor incorporates a thermal element and a High Performance photoelectric smoke sensing chamber. The smoke chamber is easily removed or replaced for cleaning and utilises a unique baffle design which allows smoke to enter the chamber whilst keeping out ambient light. The three modes are controlled from the control panel allowing either the optical element or thermal element or both elements to be active in making fire decisions. Beam detectors operate on reflection principles with advanced motorised alignment technology and utilise a low level controller for ease of installation and maintenance. An integral loop module provides full connectivity with a Hochiki ESP compatible panel. The audio visual range includes loop powered addressable sounders and visual beacons in wall mount, base mount and weather-proof versions. Sounders are designed to fit onto the standard detector base and the ceiling mount versions may be fitted with a range of detectors. A unique auto shutdown mode helps minimise noise polution. Interface modules include input monitoring modules, relay output modules, sounder controller modules and zone monitore modules in a varietry of enclosure to suit the application.. ALN-EN Photo-electric smoke sensor 41.30 ATJ-EN Combined heat sensor 41.30 ACB-EW Waterproof combined heat sensor (IP67) 84.80 ACC-EN Multi sensor (combined optical/heat) 54.40 YBN-R/3 Sensor base 2.64 YBO-R/SCI Short circuit isolator base 21.90 HCP-E(SCI) Addressable call point - red c/w short circuit isolator 44.50 HCP-E/Y Addressable call point yellow - without back box 62.50 HCP-W Weatherproof addressable call point Red 139.88 HCP-W(SCI) Weatherproof addressable call point - Red c/w isolator 162.50 YBO-BS Loop powered base sounder 43.50 YBO-BSB Loop powered base sounder beacon 65.00 CHQ-AB Loop powered addressable beacon (Red) 42.50 CHQ- Loop powered addressable beacon (Amber / Blue) 42.50 AB(AMB/BLU) CHQ-ARI Loop powered remote indicator 42.50 CHQ-WS2 Loop powered wall mounting sounder (Red) 53.14 CHQ-WSB Loop powered wall mounting sounder beacon (Red) 77.64 WS2-WPK Wall sounder weatherproofing Kit (IP65) 11.26 YBO-R/3(RED) Red mounting base for CHQ-WS2 2.64 YBO-R/SCI(RED) Red Isolator base for CHQ-WS2 2.64 CHQ-DSC(SCI) Dual Sounder Controller with Isolator 110.64 CHQ-SZM(SCI) Single Zone Monitor with Isolator 68.76 CHQ-DZM(SCI) Dual Zone Monitor 138.14 CHQ-DRC(SCI) Dual Relay Controller with Isolator 85.64 CHQ-DIM(SCI) Dual Input Module with Isolator 62.14 CHQ-MRC(SCI) Mains Relay Controller with Isolator 73.50 CHQ-POM Powered Output Module 38.94 CHQ-SIM Single input module 38.14 20 KGM Fire & Security Distribution Ltd, Unit A4, Spectrum Business Centre, Medway City Estate, Rochester Kent ME2 4NP

The Nittan Group has been at the very forefront of the international fire protection industry since 1954 and has sales, R&D and manufacturing bases in Japan, China, Sweden, Bahrain and the UK. Nittan Europe was established in 1972 and has grown to become a major player in the fire protection industry. With the extensive support facilities of our Tokyo parent company, Nittan Europe now supplies in excess of 500,000 detectors per year, all of which are made to marine standard for exceptional quality. Our latest breed of sophisticated Evolution analogue addressable fire detectors and ancillary products are sold worldwide. Using the scattered light principle inherent in optical detectors, the EV-DP Dual Optical Detector goes one step further and uses both IR and blue LEDs to provide a more accurate measurement of particles within the chamber. By calculating the ratio of these light sources, which operate at different wavelengths, the EV-DP can determine the particle size and thus distinguish between smoke and non-combustion products such as steam and dust. This patented, award winning technology is unique to Nittan and provides an excellent solution to false alarms in areas prone to steam and dust, including hotels, hospitals and other areas of multiple occupancy. Devices offer the unique Omniview 360 o indication LED. The EV-PS Optical Detector comes with a sounder fully integrated within the sensor itself as opposed to a separate sounder base. This clever design makes for quick and simple installation saving both time and money, whilst remaining extremely competitively priced. It also makes for a more aesthetically pleasing appearance, with a lower profile for an unobtrusive appearance. Further efficiencies are available with the EV-PSBCN Beacon base which has been designed for use with the EV- PS Optical Smoke detector with built in sounder. The detector drives and controls the EV-PSBCN base, with the entire platform only taking one address for maximum system efficiency. IP65 rated as standard, the wall mount EV-HIOP-SB(IC) is an extremely cost effective wall mounted Sounder / Beacon. It comes with 16 alarm tones to choose from and individually controlled alarm and alert tones, allowing customers to choose a combination that works for any installation. It is EEPROM Addressed (Programmer) and features FSK signalling protocol for robust, reliable communications. EV-P Analogue Photoelectric Detector 38.80 EV-DP Analogue Dual Photoelectric Detector 52.50 EV-H-A1R Analogue Rate of Rise Heat Detector 38.80 EV-H-CS Analogue Hi Temp Heat Detector 84C 38.80 EV-PH Analogue Photoelectric & A1R Heat Detector 50.00 EV-PS Analogue Photoelectric Detector c/ Built in Sounder 72.50 EV-MCP-RS Analogue Reset Surface/Flush Mount Call Point (IP24) 43.80 EV-MCPWP Analogue Evolution Reset Weatherproof Callpoint (IP67) 120.00 RPK-10 Pack 10 Call Point Keys 7.80 EV-ABS L/PWR Analogue Base Mountable Sounder (No Base) 42.50 UB4-EV-AB Base for EV-ABS & AS-ABS Sounder 2.50 VCT-03-CP-W Vector Cap Plate (White) for EV-ABS 4.40 VCT-03-CP-R Vector Cap Plate (Red) for EV-ABS 4.40 EV-AV2 Ceiling/Wall Mount Sounder / Beacon 67.50 EV-AV2 Base Sounder / Beacon Base 67.50 EV-PSBCN Base Beacon Base - Use exclusively with EV-PS 37.50 EV-HIOP-SB(IC) High O/P Sounder / Beacon 75.00 EV-HIOP- SDR(IC) High O/P Sounder 57.50 EV-MINI I/P Mini Input Module 48.80 EV-OP Output Module 57.50 EV-IP Input Module 60.00 EV-SIO Single Input/Output module 74.88 EV-SCM Sounder Control Module (Requires Ext 24v PSU) 75.00 EV-ZMU Zone Monitor Module (Requires Ext 24v PSU) 80.00 EV-SBM Non-Addressed 15A Sounder Booster 80.00 EV-240v MRA Non-Addressed Mains (240v ac) Interface Relay 84.90 S.C.I.-5 Short Circuit Isolator (Base) 15.70 S.C.I.-6 Short Circuit Isolator 15.70 S.C.I.-6 SCI-6 Single Back Box 1.50 EV-AD2 Address Address Programming Tool 247.50 Programmer Module Module Addressing Lead for use with EV-AD2 33.80 Addressing Lead Spare Pin Kit Module Lead Spare Pin Kit 44.60 EV-PRADAPT Adaptor Plate / Lead for EV-AV2 / SB / BI 27.50 ADJ MOUNT BRKT- EVC-IR Adjustable Mounting Bracket for Flame Detector 62.50 UB-6EV BASE - use with EV Analogue detectors 2.50 STB-4SE-EV DEEP BASE - use with EV Analogue detectors 6.30 DEEP BASE 21 Phone: 01634 716882 Fax: 01634 711557 www.kgmfireandsecurity.co.uk

K GM FI R E & S EC U R I TY DI S TR I BU TI O N Zeta Alarm Systems, a trading name of GLT Exports Ltd, was founded in 1985 and is one of the few remaining privately held UK manufacturers of Fire Alarm, Gas Detection and Emergency Systems. While the existing loop device protocol has served well for many years, the all-new Fyreye MKII communications protocol has been designed to be more powerful, more flexible and with plenty of room for future expansion. This will allow continued development of innovative products, without being restricted by protocol limitations, for many years to come. We have taken the opportunity to increase the level of error checking capability eight fold and we believe that the robustness this gives will make Fyreye MKII Protocol systems to be the benchmark of error free operation, even under extreme conditions. The Quatro system control panel is designed, manufactured and tested to fully meet the requirements of EN54 part 2 and part 4. This engineer friendly panel is of a modular nature, offering 1 to 4 loop expansion capacity and an extremely intuitive & user friendly system control interface. The Quatro Connect software is available for configuring the system and allows download to the system via USB connection. Up to 64 panels/repeaters may be networked over 10,000m of data cable and the Graphical Alarm Management system provides capability for very large projects such as universities, hospital complexes etc. 1-4 loop, expandable by loop cards 2 x conventional sounder circuits Fire and fault relays Auxiliary 24V Power 250 devices per loop 16 Alarm tones selectable from control panel Hard Addressing via DIL switch Soft Addressing via hand held programming tool 64 node network capability Available soon from KGM. Keep in contact for further details 22 KGM Fire & Security Distribution Ltd, Unit A4, Spectrum Business Centre, Medway City Estate, Rochester Kent ME2 4NP

Specialist Fire Equipment FIRERAY Optical Beam Smoke Detectors are an efficient and economical way of providing wide area smoke detection. They are usually used in situations where it is impractical, inappropriate or not cost effective (installation, wiring and maintenance) to use traditional point-type detectors and they also enable coverage of a large area at minimal cost. Optical Beam Smoke Detectors are also ideally suited for situations that might include high ceilings, dusty and dirty environments, or environments that experience temperature extremes. 5000-101 FIRERAY 5000 Self Aligning Beam System 50m 520.00 5000-102 FIRERAY 5000 Self Aligning Beam System 100m 634.40 5000-002 FIRERAY 5000 Single Detector Pack 50m 416.00 5000-039 FIRERAY 5000 Single Detector Pack 100m 530.40 5000-004 FIRERAY 5000 Long Range Kit 114.40 0206.09 FIRERAY 50R Infrared Smoke Detector 50m 442.00 0206.10 FIRERAY 100R Infrared Smoke Detector 100m 561.60 3000-101 FIRERAY 3000 Infrared Smoke Detector 676.00 3000-015 FIRERAY 3000 Detectors Pack 561.60 Two main attributes make The Fire Beam stand out from the crowd. A motorised beam head that continually selfaligns, and a low level controller from which all major functions can be performed. By utilising motors within the beam head The Fire Beam can make commissioning a safer and more accurate procedure. High quality stepper motors allows micro adjustments of just 1/40 of 1 degree to the beam head. Controlled by software, this finds and continually monitors its position in relation to the reflector. This ensures that you achieve perfect alignment every time and that your beam will keep that alignment. Whilst the smallest movement of a building through heat changes or settlement may easily move a beam off its target The Fire Beam will continually monitor any movement and re-align itself automatically saving expensive return visits to site to re-align beams at high level. The Low Level Controller means that once the head unit is in place, you may make any adjustments from ground level. FIREBEAM FIREBEAM Self Aligning Optical Beam Smoke Detector: 5 40m. 438.00 40-KIT-80 FIRE BEAM mid range extension Reflector Kit: 40 80m. 65.78 80-KIT-100 FIRE BEAM long range extension Reflector Kit: 80 100m. 175.24 FIREBEAM-AF FIRE BEAM Self Aligning Optical Beam Smoke Detector Anti Fog: 5 40m. 515.12 40-KIT-80-AF FIRE BEAM mid range Anti Fog extension Reflector Kit: 40 80m. 136.80 80-KIT-100-AF FIRE BEAM long range Anti Fog extension Reflector Kit: 80 100m. 288.86 FOG-KIT FIRE BEAM Anti Fog Kit, retro fit lense and reflector. 77.22 REF-AF FIRE BEAM Anti Fog Reflector. 34.00 WIN-AF FIRE BEAM Anti Fog Window. 51.00 ADAPTOR FIRE BEAM Adaptor Plate for head unit to fit Unistrut. 41.08 FB-BRACKET FIRE BEAM Adjustable Bracket. 93.60 PSUFB24 Fire Beam PSU: 1.5A 24V DC, EN54 approved. 189.48 Commission beam from ground level & move the head View air quality and change sensitivity thresholds Change the time to fire and fault Make the alarm latching or non latching Turn on and off the green flashing light View fire and fault counts View compensation for dirt build up and cleaning Turn the beam on and off (it will reset itself after 8 hours) Monitor the temperature at the beam head! Adjust output and receiver settings Complete the self-test routine 23 Phone: 01634 716882 Fax: 01634 711557 www.kgmfireandsecurity.co.uk

K GM FI R E & S EC U R I TY DI S TR I BU TI O N AVAC Voice Evacuation The C-Tec AVAC system provides a cost-effective modular voice alarm system purposely designed to simplify the provision of a fully BS5839-8 compliant voice alarm system. The compact wall-mounting enclosure range integrates with existing fire detection systems and includes: A digital message store containing programmable evacuate, alert and test messages. A prioritised mixer and two 60 Watt 'Class D' amplifiers; An EN54 compliant switch mode PSU / battery charger; Three balanced line level inputs (for optional firefighter's microphone, public address and background music). The fact that multiple master and slave AVACs may be interconnected makes AVAC ideal for most small to medium-sized applications including hotels, licensed premises, leisure centers, shopping complexes and offices.. With high quality pre-recorded digital messages, near CD-quality sound and ancillary connections for optional emergency microphones, public address and background music equipment, AVAC is particularly suited for factories, office blocks, shopping centres, hotels and leisure centres. Suitable for category V1 and V2 systems complying with BS5839 part 8 (2008) Straightforward fire alarm interface that can be connected to any fire alarm system via relays or input/output modules Apollo specific interface for direct connection to XP95/Discovery loop Two x 60-Watt continuous average power Class D amplifiers (plus optional standby amplifier) An EN54-4 compliant switch mode power supply and battery charger Space for 2 x 7Ah batteries typically providing 24 hours standby and 30 minutes alarm running time Three balanced line level inputs for the optional connection of an emergency microphone, paging/public address microphone(s) and a background music source A slave line level output allowing the connection of up to 26 slave AVAC amplifiers to extend loudspeaker coverage and allow greater flexibility over public address paging and background music distribution (as they have their own paging and background music inputs) VA403 Master AVAC dual 60W amplifier 1,574.10 VA403H Master AVAC dual 60W amplifier, c/w hot-swap standby 1,823.30 VA402 Slave AVAC dual 60W amplifier 1,136.90 VA402H Slave AVAC dual 60W amplifier, c/w hot-swap standby 1,329.90 CRS Custom recording session, up to 5 messages 715.00 VA405 FM1 Emergency microphone (1 only per system) 643.50 VA405X FMIC Emergency microphone (up to 4 only per system) 858.00 VA406 1ZDM Line level paging microphone (1 only per system) 357.50 VA406X SPE045 Line level paging mic (up to 4 only per system) 858.00 PA105* 5 Zone self-cancelling paging microphone console 1,040.00 PA110* 10 Zone self-cancelling paging microphone console 1,560.00 PAZU10* SPE119 Wall-mounted 10-zone microphone switching unit 2,288.00 VA421A 6'' 6W Ceiling speaker c/w steel fire dome 63.46 VA422A 8W wall mounting metal cabinet speaker 80.00 VA423 8W wall mounting bi-directional metal speaker 98.50 VA428 30W pendant loudspeaker 138.20 VA430 6W round wall/ceiling speaker in metal cabinet 57.80 VA490 Ceramic terminal block and thermal fuse assembly 6.60 VA492 VA loudspeaker metal termination box 30.16 LOADMASTER Loudspeaker line tester 215.04 24 KGM Fire & Security Distribution Ltd, Unit A4, Spectrum Business Centre, Medway City Estate, Rochester Kent ME2 4NP

SigTEL Refuge & Fire Telephone System Current Building Regulations insist all new non-domestic buildings with more than one storey provide refuge areas relatively safe places where people who cannot easily use fire escapes and evacuation lifts can call for assistance and wait until help arrives. Simple, effective two-way communication in these areas is essential, firstly to assist rescue teams in determining where assistance is required and secondly to reassure people help is on the way. C-TEC s SigTEL Emergency Voice Communication (EVC) System has been specifically designed to meet the rising demand for fully compliant BS 5839 Part 9 disabled refuge systems. The range comprises two wall-mounting master controllers (the ECU-4, pictured above right, and ECU-8 which can handle 4 and 8 lines respectively) and an eight line expansion unit, the ECU-8S. Typically located in a building s control room or fire services access point, the ECU-4 and ECU-8 allow management and/or the fire services to communicate via a telephone-style handset with the system s outstations. Two types of outstation are available (Type A and Type B). Disabled refuge systems use Type B intercom style outstations. Our EVC302GF Type B outstation offers true hands-free duplex speech and allows anyone in a refuge area to communicate with building control at the touch of a button. Attractively finished in green steel, it includes connections for an optional induction loop system for the hard of hearing and a generalpurpose relay output that closes on activation of the unit. In addition to our EVC302GF flush outstation, surface, weatherproof and stainless steel versions are also available. Fire telephone and stadium marshal systems use Type A telephone-style outstations. Our EVC301RPO outstation comprises a telephone handset in a push-to-open red steel cabinet. It is typically located at entrances and fire-fighting lobbies to allow fire marshals to communicate with building control during an emergency. Its housing has openings to allow its phone to be heard and an optional flush mount bezel is available. Both types of outstation connect to SigTEL s central control equipment using two cores of 1.5mm sq. enhanced fire rated cable. The Disabled Persons Toilet Alarm kit provides a simple solution to implementing a BS8300 compliant emergency assistance alarm (except cables and fixings). Attractively designed, easy to install and simple to use, it allows a distressed person to raise an alarm in the event of an emergency. To operate, the user simply pulls the cord of a ceiling pull unit to activate a light and sounder outside the WC. The NC951 can help building managers and service providers comply with the requirements of BS8300, the Disability Discrimination Act, the Care Standards Act and the English Tourism Council's National Accessibility Scheme. The system is also ideal for use as a single zone emergency assistance alarm in changing rooms, solariums, interview rooms and reception areas. ECU-4 4 Line Master EVC control unit c/w line cards, handset and display 1,168.76 ECU-8 8 Line Master EVC control unit c/w line cards, handset and display 1,491.88 ECU-8NT 8 Line Master EVC control unit c/w line cards and display 1,251.26 ECU-8S 8 Line Slave EVC expansion unit (expands ECU-8 to 16 lines max) 1,040.90 ECU721 Network Communication card 144.40 LC2 2-way line card for type A fire telephone outstations 34.36 LC3 2-way line card for type B hands-free intercom outstations 30.46 ECU-32 32 line desk control unit with handset and display 1,963.50 ECU-64 64 line desk control unit with handset and display 2,945.26 ECU-128 128 line desk control unit with handset and display 3,927.00 EVC302GF Green hands-free EVC outstation, flush mounting 226.52 EVC302GS Green hands-free EVC Outstation, surface mounting 241.38 EVC301RPO Red fire telephone EVC outstation, c/w handset (push to open version) 257.40 EVC301RLK Red fire telephone EVC outstation, c/w handset (lift lock version) 257.40 FiTT EVC line tester 165.00 CATCON Adaptor box to convert fire-rated cable to Cat 5 36.60 XSB Blue xenon strobe, 12V 49.50 XSA Amber xenon strobe, 12V 49.50 SDM Strobe driver module, 12V 20.64 NC951 Standard disabled persons toilet alarm kit 104.00 NC951/SS Stainless steel single zone call system kit 156.00 25 Phone: 01634 716882 Fax: 01634 711557 www.kgmfireandsecurity.co.uk

K GM FI R E & S EC U R I TY DI S TR I BU TI O N Ancillary Fire Equipment A complex world needs clever products to help solve practical problems. Our products are developed with the cooperation of system design and technical support engineers from many of the UK's leading companies. They have features (mechanical, electrical or software) that engineers have requested but were unable to source from other companies. Installation companies and engineers find our products solve many system design and commissioning nightmares including timer relays, multifunction isolation devices and fully compliant mains isolation switches. Part No. Description List Price 500-010 Easy Relay: 12V DC coil, DPCO 230V AC 8A contacts, mounted on a simple carrier plate 10.78 500-020 Easy Relay: 24V DC coil, DPCO 230V AC 8A contacts, mounted on a simple carrier plate 10.78 500-050 Easy Relay: 230V AC. coil, DPCO 230V AC 8A contacts, mounted on a simple carrier plate 16.94 500-011W Easy Relay Boxed: 12V DC coil, DPCO 230V AC 8A contacts, mounted on a white single gang plate, white, back box not included 11.82 500-021W/R Easy Relay Boxed: 24V DC coil, DPCO 230V AC 8A contacts, mounted on a single gang plate, white or red, back box not included 11.82 500-051W/R Easy Relay Boxed: 230V AC coil, DPCO 230V AC 8A contacts, mounted on a single gang plate, white or red, back box not included 17.42 500-0002W/R Multi-Function Relay Boxed: 9.5 42V DC or 7.5 30V AC coil trigger range, DPCO 230V AC 6A fused contacts, pulsed anti-latch option, mounted 29.26 on a single gang plate, white or red, supplied complete with back box. 500-100W/R Single Gang Back Box: 32mm deep plastic back box, white or red, low fume and zero halogen materials. 1.24 400-210W/R Fire System Secure Mains Voltage Safety Isolator: Tamperproof double pole safety isolation switch for fire and safety systems. Key-switch operation, 27.42 fused at 4A, mounted on a single gang plate, white or red, supplied complete with back box. 500-205W/R Zone Detection Circuit Isolator: zone isolation switch, 24V DC, with indicators and buzzer, mounted on a single gang plate, white or red, supplied 50.82 complete with back box. 500-640W/R Zone Detection Circuit Timed Isolation Unit. Zone isolation switch, 24 V DC, with automated time-out facility to reactivate circuit after 2, 4, 6, 8 or 10 50.82 hours, indicators and buzzer, mounted on a single gang plate, white or red, supplied complete with back box 500-200-KSW/R Fire System Output Delay and Isolation Unit. Output delay isolation switch, 24 V DC, with selectable time delay facility from 0 to 5 minutes, indicators and buzzer, mounted on a single gang plate, white or red, supplied complete with back box. 50.82 Power Supply Units The KGM range of Power Supply Units are EN54 compliant, incorporate a battery charger and some models are mounted within a dual purpose flush or surface mount enclosure complimenting the fire panel range. The BCM-3 model is available in 1.7A or 2.4A and will monitor all fault conditions including charger fault, charger voltage level, input voltage supply fault and supply removal. GFE-BCM-3 (2.4A) Boxed 2.4A 28V DC Power Supply Unit, EN54 99.58 GFE-BCM-3 (1.7A) Boxed 1.7A 28V DC Power Supply Unit, EN54 89.14 VPSU-24-02B/1 Boxed 24Vdc PSU - 2A c/w battery charging (260x320x87mm) 84.00 VPSU-24-03B/1 Boxed 24Vdc PSU - 3A c/w battery charging (260x320x87mm) 102.00 VPSU-24-05B/4 Boxed 24Vdc PSU - 5A c/w battery charging and relay outputs (260x320x87mm) 222.80 VPSU-24-05C/4 Boxed 24Vdc PSU - 5A c/w battery charging and rly outputs (400x425x87mm) 257.90 26 KGM Fire & Security Distribution Ltd, Unit A4, Spectrum Business Centre, Medway City Estate, Rochester Kent ME2 4NP

Door Hold Magnets Our door retainers combine good looks, high performance and economy within variety of housings including a flame retardant, low profile ABS plastic body or metal housing. Installation is simple, with knockouts provided for entry of surface mount conduit and ample space to connect external wiring to the 4.0mm terminals. Each door retainer is fitted with a spring loaded release pin mounted centrally within the electro-magnet. On power off, the release pin then ensures that the fire door is pushed away from the electro-magnet. Additional accessory products are available, including floor brackets, chains and additional keeper plates. DRW-24-200 Wall Mount Door Retainer, low profile, 24V, 200N, c/w keeper plate 37.48 DRW-24-500 Wall Mount Door Retainer, low profile, 24V, 500N, c/w keeper plate 78.72 DRW-230-200 Wall Mount Door Retainer, low profile, 230V, 200N, c/w keeper plate 38.26 FMB Floor Mounting Bracket, to fit DRW door retainers 9.10 DRF-24-200 Floor Mount Door Retainer, low profile, 24V, 200N, c/w keeper plate 69.00 DRF-24-500 Floor Mount Door Retainer, low profile, 24V, 500N, c/w keeper plate 92.36 KP-01 Keeper Plate, universal model 13.26 CP-01 Chain Plate, keeper plate with 1m of chain 49.90 Covers, Cages & Bells We stock a wide range of useful products to prevent false alarms and the theft and vandalism of the things that protect us all such as manual call points and smoke detectors. We stock most items from KAC, STI, Vimpex and many others. If the items you require are not shown please call. KAC-MCP-COV KAC slide MCP Hinged Cover 4.40 PS-210 KAC replacement flexible element 1.30 MUS-158 KAC replacement glass element 1.00 STI 6530 Stopper flush mounted without sounder 38.50 STI 6531 Stopper surface mounted without sounder 51.10 STI 6532 Stopper flush mounted with integral sounder 84.00 STI 6533 Stopper surface mounted with integral sounder 95.90 STI 6931 Call Point Stopper surface mounted 48.30 STI 6535 Weather Stopper surface mounted 59.80 STI 1200 Stopper II flush mounted without sounder 86.40 STI 1230 Stopper II surface mounted without sounder 110.16 STI 1100 Stopper II flush mounted with integral sounder 136.08 STI 1130 Stopper II surface mounted with integral sounder 159.84 STI 1250 Weather Stopper II flush mounted 101.52 STI 3150 Weather Stopper II surface mounted 127.44 STI 9604 Steel Web Stopper - Flush - 75 d x 175 mm dia 41.04 STI 9606 Steel Web Stopper - Flush 95 d x 175 mm dia 41.04 STI 9609 Steel Web Stopper - Flush 124 d x 215 mm dia 41.04 STI 9601 Steel Web Stopper - Flush 70 d x 210 mm dia 41.04 STI 9605 Steel Web Stopper - Surface 115 d x 180 mm dia 32.90 STI 9610 Steel Web Stopper - Surface 145 d x 214 mm dia 33.10 STI 9602 Steel Web Stopper - Surface 108 d x 215 mm dia 43.80 MR20630 Rotary Hand Bell 40.00 MR20640 Round Key Box 17.00 MBF-6EV-24 Vimpex 6" Bell 17.80 MBA-6+BBX-4 6" External Fire Alarm Bell 76.00 SMBF-6EV-24 Strobell Combined Fire Alarm Bell and Clear Xenon Strobe 87.20 27 Phone: 01634 716882 Fax: 01634 711557 www.kgmfireandsecurity.co.uk

K GM FI R E & S EC U R I TY DI S TR I BU TI O N Miscellaneous Equipment Batteries and fire resistant cables form an integral part of the emergency and essential building service systems required to operate in the event of fire. We hold a wide a range of common battery sizes in stock at our Rochester trade counter and are able to source any other requirements. Please call us with your requirements or specification for a quotation. In terms of cable requirements, Prysmian leads the way with the FP range. FP is the original, easy to install and fully compliant fire safety cable range, approved by engineers, installers and regulators. Choose FP, only from Prysmian, to help protect property and save lives in a fire. The FP cable range is the result of 50 years of continuous development and includes armoured power cable solutions for life safety and fire fighting systems which exceed the standard and enhanced requirements. FP2C-1.5-R Pirelli FP200 Gold 2 Core 1.5mm - 100m Roll - Red ASK FP2C1.5-W Pirelli FP200 Gold 2 Core 1.5mm - 100m - White ASK S2GY Earth Sleeving 2mm G/Y - 100m Roll 5.00 AL3444 20mm Nylon Glands/Locknuts kit 10 pack - Red 5.20 AL3445 20mm Nylon Glands/Locknuts kit 10 pack - White 5.20 AP7-R Pirelli AP7 Copper P Clip - Red - Pack 100 20.80 AP7-W Pirelli AP7 Copper P Clip - White - Pack 100 20.80 ARB12RED All Round Band 12mm Pack (Red) 14.40 RHG20RED Shroud 20mm - Red 10.00 RHG20RED Shroud 20mm - Red 10.00 SSTR2 Stainless Steel Cable Tie 200 x 4.6 - Pack 100 31.10 080-165-035 Cable Tie 200mm x 4.8mm - Black - Pack 100 3.92 080-165-035 Cable Tie 300mm x 4.8mm - Black - Pack 100 5.84 TR10-B Cable Tie 370mm x 4.8mm - Black - Pack 100 7.50 F0101 Helacon Wire Connectors 16.80 CS15 Connector Strip15 Amp Pack 10 8.80 CS5 Connector Strip 5 Amp Pack 10 5.10 CS-CLIP Cable Safe Clips For Use With Mini Trunking 47.00 12V-2.1Ah 12V 2.1Ah Sealed Lead Acid battery 13.40 12V-3.2Ah 12V 3.2Ah Sealed Lead Acid battery 16.00 12V-7Ah 12V 7.0Ah Sealed Lead Acid battery 20.00 12v-12Ah 12V 12Ah Sealed Lead Acid battery 39.20 12V-17Ah 12V 17Ah Sealed Lead Acid battery 50.48 Battery and cable prices are subject to variation so please call for details We stock a full range of common fixtures and fittings including, screws, plugs and conduit. 216-355-025 Panhead Slot Screw M4 x 16 - Box 100 7.70 216-355-030 Pan Head M4 x 20 Screw - Brass - Box 100 9.80 216-355-050 Panhead Slot Screws M4 x 40 - Box 100 15.20 S81 8 x 1" Twinthread - Box 200 3.20 S8125 8 x 1.25" Twinthread - Box 200 4.20 SDE Driva Cavity Dry Wall Suspension Fixing - Pack 100 13.00 056-105-040 Plasterboard Fixings - Pack 10 3.30 S81ST Self Tappers BZP P/H Cross 8 x 1" - Box 200 5.00 S3540NP SKT Screw M3.5 x 40 Nickel Plated - Box 100 5.60 200-124-100 Wafer Head Self Driller 4.8 x 16mm - Box 200 7.00 242-222-010 Tub of 500 Red Wall Plugs and 8 x 1 1/2 Screws 17.38 RPRED Expansion Plug Red 6/6.5mm 6/8/10 Screw Size - Pack 100 1.80 S625PW Penny Washer M6 x 25mm - Box 100 5.40 PVC (Add Colour) PVC Tape - Available in Black, Blue, Brown, Green/Yellow, Red 1.08 093-342-020 Double Sided Tape 50mm x 50m 10.70 238-515-455 Sticks Like Sh*t 9.80 238-502-035 Silicone Multipurpose Sealant 4.60 238-507-010 Firemate Sealant 5.10 28 KGM Fire & Security Distribution Ltd, Unit A4, Spectrum Business Centre, Medway City Estate, Rochester Kent ME2 4NP

AB4415G Adaptable Box 100mm x 100mm x 37.5mm - Galvanised 3.00 CF20HG Galvanised Conduit box -20mm "H" 2.40 CF20UG Galvanised Conduit box 20mm "U" 3.00 CF202G Galvanised Conduit box 20mm 2W 3.00 CF20YG Galvanised Conduit Box 20mm Y 3.70 CF20SG Galvanised Conduit Box - Star 3.92 CF201G Galvanised Conduit Box 20mm Terminal 2.70 W002967 Galvanised Conduit Box Lids 0.20 PT2516SA Mini Trunking 25x16mm Self Adhesive 3.30 AL7292 Surface Box Mini Trunking adaptor 0.80 TCR2WH Ceiling Rose Adaptor 2.20 APPBT1G25S 1 Gang 25mm Surface box for Mini Trunking 2.80 AL5861 End Cap 25x16mm for Mini Trunking 0.70 AL5863 External Angle 25x16mm for Mini Trunking 0.70 AL5860 External Coupler 25x16mm for Mini Trunking 0.70 AL5862 Flat Angle 25x16mm for Mini Trunking 0.70 AL5865 Flat Tee 25x16mm for Mini Trunking 1.10 AL5864 Internal Angle 25x16mm for Mini Trunking 0.70 PCF202W 20mm Through Box 0.60 PCF20UW 20mm U Box CEDDLBCIR Circular Dry Lining Box 32mm Deep to BS5733 1.40 MDCRB2WH Circular Dry Lining Box, Double back entry (Red clamps) 7.42 S619DLB Dry Lining Box 1 Gang 1.70 CR7WH 25mm Round Conduit - Heavy Gauge 3.60 3MRB4WH 25mm Condiuit Circular Angle Box 1.70 AL5649 - W695064 White Circular Lid for Conduit 0.36 MAB3WH 25mm Conduit Adaptor - Female Thread 0.60 MIB3WH 25mm Inspection Bends 2.40 MIT3WH Conduit Inspection Tees 3.10 3MRB5WH 25mm Conduit Tee Box 1.90 3MRB2WH 25mm Conduit Circular Box - Terminal 1.60 3MRB3WH 25mm Conduit Circular Through Box 1.90 MSS3WH 25mm Strap Saddles 0.28 MSB3WMT 25mm Spacebar Saddles 1.00 SDH Heat Detector 230v Mains Battery Backup 20.80 SDM Smoke Detector 230v Mains Battery Backup 20.80 SDB Smoke Alarm Battery Operated 11.20 ZD-CO-9B - 47-520 Domestic LED CO Alarm - 1 Year Battery 29.40 ZD-CO-9X - 47-521 Domestic LED CO Alarm - 7 Year Battery 36.40 EMS6101 Portable Motion Sensor Alarm 10.20 EMS6102 Wireless 3 in 1 Alarm & Light 25.40 EMS6103 Wireless Garden & Shed Alarm 38.00 EMS6104 Wireless PIR Motion sensor alarm with keypad 21.60 By popular request we now stock a wide range of C.K tools at our Rochester trade counter. For over 100 years, C.K has been at the forefront of hand tool manufacturing, producing high quality tools that meet the most demanding needs of trade professionals. C.K tools are engineered to offer leading performance, durability, accuracy and strength, all of which are key requirements for professional results. Not content with simply conforming to all relevant international standards, C.K work with metallurgical and design engineers to develop new materials, manufacturing techniques and finishing treatments to push the boundaries of performance. Driven by research through an extensive panel of cross trade professionals, tools are developed to assist with everyday tasks; an approach proven to produce innovative tools that transform working practices 29 Phone: 01634 716882 Fax: 01634 711557 www.kgmfireandsecurity.co.uk

K GM FI R E & S EC U R I TY DI S TR I BU TI O N The original Solo detector testing toolkit includes functional testing equipment for smoke (Solo A3), CO (Solo C3), heat (Solo 461) detectors and detector removal tools for high level, all interchangeable on telescopic fiberglass access poles. Lightweight and simple to use Universal design suits wide range of detectors (up to 100mm / 4" in diameter) Spring-loaded for suspended ceilings Transparent test cup for clear view Swing frame for use at angles Outstanding quality with lifetime warranty Detector manufacturer approved Solo 332 suitable for detectors up to 177mm / 7" in diameter SOLO 100-001 Fiberglass 4 section telescopic pole - 4.5m POA SOLO 108-001 Fiberglass 2 Section telescopic Pole - 2.5 meters POA SOLO 101-001 Fiberglass Extension Pole 1.13 meters POA SOLO 200-001 Universal Detector Removal Tool POA SOLO 1002-001 Replacement pair of grips for SOLO 200-001 POA SOLO 330-001 Aerosol Smoke and CO Dispenser POA SOLO 1028-001 Replacement Aerosol retaining cup POA SOLO 1005-001 Replacement Silicone membrane for test cup POA SOLO 461-001 Cordless heat detector test kit POA SOLO 460-001 Cordless Heat gun POA SOLO 720-001 Battery baton POA SOLO 725-001 Mains and car charger POA SOLO 1005-001 Replacement Silicon membrane POA SOLO 423-001 110/120V Heat detector test head POA SOLO 425-001 5m Extension cable POA SOLO 424-001 220/240V Heat detector test head POA SOLO 610-001 Carry bag set to fit all product range, separate pole bag inc. POA SOLO 810-001 2.5m Smoke Detector Test Starter Kit POA SOLO 808-001 4m Smoke Detector Test Starter Kit POA SOLO 809-001 6m Smoke Detector Test Starter Kit POA SOLO 811-001 6m Smoke Detector Test and Removal Starter Kit POA SOLO 812-001 8.2m Smoke Detector Test and Removal Starter Kit POA SOLO 814-001 6m Smoke / Mains Heat / Removal / Bag Starter Kit POA SOLO 822-001 6m Smoke / Cordless Heat / Removal / Bag Starter Kit POA SOLO 823-001 9.3m Smoke / Cordless Heat / Removal / Bag Starter Kit POA SOLO A3-001 Detector Tester aerosol can 250ml 20.60 SOLO C3-001 CO Tester aerosol can 4l 20.80 SOLO A7-001 Detector duster aerosol can 250ml 24.50 SMOKE-SABRE-01-001 Smoke Sabre FlicknTest can 14.40 The world's first multi-stimulus detector tester for smoke, heat and / or CO fire detectors enabling faster and more efficient testing of both single and multi-sensor detectors. The production of different stimuli (e.g. smoke, heat) can be achieved sequentially or simultaneously. Testifire's array of advanced and intelligent technologies changes traditional approaches to test stimuli production and delivery. Testifire is the result of several years of technological development to meet 21st century health, safety, environment and technological demands. 1000-001 Testifire Smoke / Heat Head Unit POA 1001-001 Testifire Smoke / Heat Head Kit POA 6001-001 6m Testifire Smoke / Heat / Removal / Bag Kit POA 9001-001 9m Testifire Smoke / Heat / Removal / Bag Kit POA 2000-001 Testifire Smoke / Heat / CO Head Unit POA 2001-001 Testifire Smoke / Heat / CO Head Kit POA 6201-001 6m Testifire Smoke / Heat / CO/ Removal / Bag Kit POA 9201-001 9m Testifire Smoke / Heat / Removal /Bag Kit POA TS3-6PACK-001 Testifire Replacement Smoke Capsules 6 Pack POA TS3-3PACK-001 Testifire Replacement Smoke Capsules 3 Pack POA TC3-6PACK-001 Testifire Replacement CO Capsules 6 Pack POA TC3-3PACK-001 Testifire Replacement CO Capsules 3 Pack POA 30 KGM Fire & Security Distribution Ltd, Unit A4, Spectrum Business Centre, Medway City Estate, Rochester Kent ME2 4NP

Emergency Lighting Emergency Lighting is a primary life safety system and is required where necessary, to be provided in premises where people are employed in order to assist the occupants to evacuate in the event of an emergency. If artificial light is installed in a workplace then emergency lighting is a mandatory requirement. Emergency Lighting should cover the following aspects: General, Escape Route, Open Area (anti-panic), Standby Lighting, and High Risk Task Area lighting. Our range of lighting has been selected to give a broad range of luminaires to cover most common applications, and with a range of spares to assist with on-going maintenance. Design Considerations EM/8W/M3 8W Switchable Emergency Bulkhead light, 3 hr, IP65 24.00 EM/LED/M3 LED Emergency Bulkhead, Maintained & Non Maintained, 10 LED 37.80 EM/LED/M3/CH LED Emergency bulkhead Meteor, Maintained & Non Maintained, 48000 hrs expectancy 42.00 EM/LED/3W/DL 3W High Power LED Downlighter Non Maintained 45.50 EM/28W/M3/2D 28w 2D Emergency Light 103.60 EM/EXT/8W/M3 8w Maintained Exit Box c/w Arrow Down Legend, 3hr, steel box, polycarbonate legend 37.80 EM/EXT/LEG/R Legend Arrow Right for exit box 10.00 EM/EXT/LEG/L Legend Arrow Left for exit box 10.00 EM/EXT/LED Emergency Exit Box - LED Type 77.00 EM/EDL/M3/C Maintained Emergency Exit Sign (Chrome), switchable, 4w, 3hr, ceiling mount 44.00 EM/EDL/M3/W Maintained Emergency Exit Sign (White), switchable, 4w, 3hr, ceiling mount 44.00 EM/EDL/LEG/L/R Legend Arrow Right/Left for hanging emergency light 10.12 EM/TWS/2X20/NM3 Non Maintained Emergency Twinspot, 2 x 20w halogen lamps, 3 hour, IP20 rated 80.00 28W-CK 28w Conversion Kit 70.00 5-SFF 5ft Single Fluorescent Fitting 104.52 5-TFF 5ft Twin Florescent Fitting 134.00 FT128W 8Watt Fluorescent Tube 3.00 XL28/4P 28Watt 4 Pin 2 D Lamp Tube 6.20 G1EK-M 1 Gang Emergency Light Keyswitch Metal Clad 12.00 G1EK-P 1 Gang Emergency Light Keyswitch Plastic 10.00 G2EK-M 2 Gang Emergency Light Keyswitch Metal Clad 16.00 G2EK-P 2 Gang Emergency Light Keyswitch Plastic 14.00 GSKEY Switch Secret Key 20 Amp 3.80 GB1-2 Metal Back Box 1 & 2 Gang 3.40 GMP1 Metal Clad Front Plate 1 Gang 2.00 GMP2 Metal Clad Front Plate 2 Gang 2.20 GYK1 Yoke 1 Gang 1.70 GYK2 Yoke 2 Gang 2.00 GP1 1 Gang Grid Plate White 1.80 GP2 2 Gang Grid Plate - White 2.00 2D-SS 2 Cell 2.4v 4ah D Cell Battery Side by Side 15.00 3D-SS 3 Cell 3.6v 4ah D Cell Battery Side by Side 21.50 4D-SS 4 Cell 4.8v 4Ah D Cell Battery Side by Side 28.60 2D-ST 2 Cell 2.4v 4ah D Cell Battery Stick 15.00 3D-ST 3 Cell 3.6v 4ah D Cell Battery Stick 21.50 4D-ST 4 Cell 4.8v 4Ah D Cell Battery Stick 28.60 31 Phone: 01634 716882 Fax: 01634 711557 www.kgmfireandsecurity.co.uk

K GM FI R E & S EC U R I TY DI S TR I BU TI O N Emergency Signs Fire and safety signs are essential to give clear visual guidance to employees, site visitors and the general public. We offer a range of signs which include Fire Action Signs and Fire Extinguisher Identification Signs. Our signs are available in a variety of sizes and materials, including photoluminescent in order to provide you with the right signs for your application. Description List Price Fire Exit Sign Any Direction 5.90 Fire Door Keep Shut 1.30 Fire Exit Keep Clear 1.00 Fire Action Notice 6.50 Call Point Sign 1.20 Fire Blanket ID Sign 1.70 Extinguisher ID Sign Foam/Water/Powder/CO2 1.70 Photoluminescent Fire Exit Sign All Directions 9.00 Photoluminescent Fire Exit Keep Clear 7.30 Photoluminescent Fire Action Notice 6.50 Photoluminescent Fire Blanket ID Sign 2.10 Photoluminescent Extinguisher ID Sign Foam/Water/Powder/CO2 2.10 Bespoke Signage ASK Fire Extinguishers Our fire extinguishers are manufactured to European standard BS EN 3 under a strictly controlled quality system to ISO9001:2008. The range available includes powder, foam, water, carbon dioxide and wet chemical along with ancillaries and blankets. Description List Price 1kg ABC Dry Powder 18.30 2kg ABC Dry Powder 22.40 3kg ABC Dry Powder 33.60 4kg ABC Dry Powder 39.20 6kg ABC Dry Powder 44.80 9kg ABC Dry Powder 48.20 2L Foam 31.50 6L Foam 41.90 9L Foam 51.10 6L Water with Additive (Aquamax) 53.20 9L Water 45.50 2kg Carbon Dioxide Frost Free Horn 51.10 5kg Carbon Dioxide Frost Free Horn 100.80 6L Wet Chemical 153.86 GRP Single Extinguisher Stand 37.90 GRP Double Extinguisher Stand 55.40 Single Tubular Chromed Steel Stand 50.40 Double Tubular Chromed Steel Stand 53.20 Single Extinguisher Cabinet 680mm 72.80 Single Extinguisher Cabinet 740mm 104.70 Double Extinguisher Cabinet 650mm 126.00 Double Extinguisher Cabinet 760mm 229.50 Extinguisher Cover 4/6kg 13.80 Extinguisher Cover 9kg 13.80 Fire Blanket 1.2m x 1.2m 17.40 Fire Extinguisher J Bracket 1.20 CO2 2kg Lug Bracket 1.30 Tamper-seals Pack of 50 3.30 32 KGM Fire & Security Distribution Ltd, Unit A4, Spectrum Business Centre, Medway City Estate, Rochester Kent ME2 4NP

Healthcare Systems 800 Series C-TEC s portfolio of products includes fire alarm control panels, voice alarm systems, disabled refuge systems, nurse call systems and audio-frequency induction loop systems. The 800 Series Call System incorporates a wide range of indicator panels and an extensive array of system components is one of the most versatile and reliable conventional call systems on the market. The 12V d.c. system is simple to install and easy to operate. Hard wired for total reliability in 4 to 6 core security cable for most installations. Most wall-mounting plastic components fit standard 25mm single or double gang back boxes, and ceiling pulls and water resistant alert points are surface mountable. The system gives two levels of call: standard (constant tone) and emergency (intermittent tone). Call Points have optional button or magnetic key reset facilities dependent on which items are selected. NC942 Single zone call controller c/w 12V 140mA PSU, reset button & relay 110.40 NC942B Single zone call controller c/w 12V 140mA PSU, reset button, relay & on-board battery. 122.98 NC941 Single zone call controller c/w 12V 250mA PSU & reset button. 110.64 NC941/SS Single zone call controller, stainless steel, c/w 12V 250mA PSU & reset button. 198.70 NC944 Four Zone call controller c/w mute/reset button, requires 12V PSU. 86.70 NC944/SS Four Zone call controller, s/steel, c/w mute/reset button, requires 12V PSU. 272.70 NC812KE 10 Zone emergency master panel c/w 12V PSU, backup battery & mute button. 313.30 NC811KE 10 Zone Emergency repeater panel. 234.92 NC822KE 20 Zone Emergency master panel c/w 12V PSU, backup battery & mute button. 426.50 NC821KE 20 Zone Emergency repeater panel. 348.10 NC832KE 30 Zone Emergency master panel c/w 12V PSU, backup battery & mute button. 539.60 NC831KE 30 Zone Emergency repeater panel. 461.20 NC842KE 40 Zone Emergency master panel c/w 12V PSU, backup battery & mute button. 746.00 NC841KE 40 Zone Emergency repeater panel. 656.42 NC852KE 50 Zone Emergency master panel c/w 12V PSU, backup battery & mute button. 875.40 NC851KE 50 Zone Emergency repeater panel. 785.80 NC862KE 60 Zone Emergency master panel c/w 12V PSU, backup battery & mute button. 1,004.62 NC861KE 60 Zone Emergency repeater panel. 915.10 NC806C Overdoor Light 24.48 NC806CS Overdoor Light & Sounder 38.44 NC806C/SS Overdoor Light, s/steel 68.20 NC806CS/SS Overdoor Light & Sounder, s/steel 77.80 NC807C Ceiling pull unit, no on-button reset, no remote socket 24.50 NCP-12 Spare ceiling pull cord accessory pack (3m cord, 2 x triangles, 1 x bullet) 4.40 NC802DB Standard call point, button reset, with remote socket 31.44 NC802DBB Standard call point with Braille label, button reset, with remote socket 44.90 NC802DM Standard call point, magnetic reset, with remote socket 31.44 NC917L Standard call push with protruding button, no on-board reset, no remote socket 27.42 NC894DKB Isolatable monitoring point, button reset, no remote socket 45.00 NC894DKM Isolatable monitoring point, button reset, no remote socket 45.00 NC802DEB-1/2 Emergency call point, button reset, with remote socket, standard and emergency calls 45.90 NC802DEM Emergency call point, magnetic reset, with remote socket, standard and emergency calls 45.90 NC804DE Emergency call / reset point, button reset, no remote socket, emergency calls only 41.90 NC809DEM Emergency call / reset point, magnetic reset, no remote socket, emergency calls only 47.90 33 Phone: 01634 716882 Fax: 01634 711557 www.kgmfireandsecurity.co.uk

K GM FI R E & S EC U R I TY DI S TR I BU TI O N sector establishments. Quantec Quantec is a powerful yet easy to use addressable call system that helps ensure vital communication throughout a building in environments where efficiency is paramount. Recently updated to include a host of new features, the system may be tailored to suit a care facility's specific requirements, exact operational needs and to the precise layout of any building. This flexibility makes Quantec the obvious choice for nursing homes, hospitals, health centres and many other private and public QT601-2 Quantec controller (space available for 2 x 7.0Ah batteries) 488.00 QT707 Quantec upload / download software c/w SAF7070000 lead (Windows 2000/XP ) 120.12 QT707S Quantec Surveyor Data Management Software c/w wall socket & lead 409.50 QT603 Quantec Network Splitter 30.70 QT608C Quantec corridor display, with controls 223.74 QT608CD Quantec corridor display, no controls 223.74 QT608CD1S Quantec large corridor display (965x163x68mm) requires 1 x QT615S display interface 1,515.80 QT615S Quantec display interface for use with QT608CD1S 110.00 QT606 Quantec overdoor light 27.70 QT606A Quantec addressable overdoor light c/w sounder 63.08 QT688 Quantec Addressable sounder 61.56 QT688/2 Quantec high output 85db addressable sounder 69.30 QT602 Quantec Call point, button reset 54.80 QT602S Quantec Call point with sounder, button reset 62.32 QT602R Quantec Call point with IR receiver, button reset 69.86 QT602RS Quantec Call point with sounder & IR receiver, button reset 77.32 QT602M Quantec Call point, magnetic reset 54.80 QT602SM Quantec Call point with sounder, magnetic reset 62.32 QT602RM Quantec Call point with IR receiver, magnetic reset 69.84 QT602RSM Quantec Call point with sounder & IR receiver, magnetic reset 77.32 QT602E Quantec Euro Call point, button reset (iconised label) 54.80 QT602ES Quantec Euro Call point with sounder, button reset (iconised label) 62.32 QT602ER Quantec Euro Call point with IR receiver, button reset (iconised label) 69.84 QT602ERS Quantec Euro Call point with sounder & IR receiver, button reset (iconised label) 77.32 QT602EM Quantec Euro Call point, magnetic reset, Nurse label 54.80 QT602ESM Quantec Euro Call point with sounder, magnetic reset, Nurse label 62.32 QT602ERM Quantec Euro Call point with IR receiver, magnetic reset, Nurse label 69.84 QT609 Quantec Call point, button reset 54.06 QT609S Quantec Call point, button reset with sounder 61.56 QT609R Quantec Call point, button reset with infrared receiver 69.08 QT609RS Quantec Call point, button reset with sounder and infrared receiver 76.56 QT609 Quantec Call point, button reset 54.06 QT609S Quantec Call point, button reset with sounder 61.56 QT609R Quantec Call point, button reset with infrared receiver 69.08 QT609RS Quantec Call point, button reset with sounder and infrared receiver 76.56 QT609M Quantec Call point, magnetic reset 54.06 QT609SM Quantec Call point, magnetic reset with sounder 61.56 QT609RM Quantec Call point, magnetic reset with infrared receiver 69.08 QT609RSM Quantec Call point, magnetic reset with sounder and infrared receiver 76.58 QT607 Quantec ceiling pull unit 24.02 QT604 Quantec monitoring point, button reset 55.40 QT604M Quantec monitoring point, magnetic reset 55.40 The Quantec range consists of an addressable control and indicator panel and an extensive range of ancillaries including ceiling pulls, wallmounting call points, monitoring points, stainless steel call points, overdoor lights, remote sounders, relays, etc. The system is simple to install and easy to operate. Hard wired for total reliability in 1.0mm 2 cable for the network spine and 4 to 6 core security cable for ancillary items. Most wallmounting plastic components fit standard 25mm single or double gang back boxes, and ceiling pulls are surface mountable. The system gives two levels of call: standard and emergency, and the response may be tailored to suit site requirements. Call Points have optional button or magnetic key reset facilities dependent on which items are selected. 34 KGM Fire & Security Distribution Ltd, Unit A4, Spectrum Business Centre, Medway City Estate, Rochester Kent ME2 4NP

PDA Induction Loops Audio-frequency induction loop systems (AFILS) allow hearing impaired people to hear more clearly. Hearing aids with the T or MT switch are able to pick up the electromagnetic field generated by an induction loop system and this signal is converted into a sound suited to the user s hearing requirements. Any person with a suitable hearing aid positioned within or near the loop can hear the loop signal, allowing them to participate more easily in conversation, ordering goods or services, listening to public performances, etc. The C-Tec PDA range of induction loop equipment is one of the most comprehensive in the UK and comprises a huge range of amplifiers, microphones, connector plates and test equipment covering virtually every conceivable AFILS application. Designed to meet or exceed the requirements of BS7594 and EN60118-4 when correctly installed, all of the amplifiers in the PDA range offer excellent intelligibility, true current mode amplification, phantom power (for electret microphones) and full compatibility with the outreach plate audio input extension system (except the PL1, VL1 and DL50). Many are also available in kit format for ease of specification, purchase and installation PL1 /K1 Portable induction loop kit, supplied in cardboard carry case 196.56 PL1 /K2 Portable induction loop kit with AFILS tester, supplied in cardboard carry case 594.86 PL1 /K3 Portable induction loop kit, supplied in plastic carry case 278.96 PL1 /K4 Portable induction loop kit with AFILS tester supplied in plastic carry case 685.40 TEAR-P Spare AFILS available sticker 2.42 VL1/B1 12v vehicle induction loop kit 238.90 VL1/B2 24v vehicle induction loop kit 401.54 ML1/K ML1 counter induction loop kit 99.30 PDA102C PDA102 counter induction loop kit 230.52 DL50 16m 2 Domestic induction loop amplifier 139.24 DL50/K DL50 16m 2 Domestic induction loop amplifier kit 160.52 PDA102L PDA102 16m 2 Small Room loop kit (tie / desk mic) 209.30 PDA102R PDA102 50m 2 Small Room loop kit (omni-directional plated mic) 243.26 PDA102S PDA102 16m 2 TV lounge loop kit 209.30 PDA200E PDA200E 120m 2 wall-mounting induction loop amplifier 313.92 AKM1 PDA200E 120m 2 Meeting/ Seminar room loop kit 369.90 AKL1 PDA200E 120m 2 lecture room loop kit 494.02 AKT1 PDA200E 120m 2 TV/ Music lounge loop kit 496.44 AKR1 PDA200E 120m 2 waiting room loop kit 369.90 AKU1 PDA200E 120m 2 Retail Unit loop kit 430.74 AKW1 PDA200E 120m 2 Place of worship loop kit 1 511.06 AKW2/L PDA200E 120m 2 Place of worship loop kit 2 (lavalier mic ) 819.98 AKW2/H PDA200E 120m 2 Place of worship loop kit 2 (handheld mic) 819.98 AKH1/L PDA200E 120m 2 health and fitness club loop kit (lavalier mic) 760.30 AKH1/H PDA200E 120m 2 Health and fitness club loop kit (handheld mic) 760.30 AKM2 PDA200E lift loop kit 540.54 35 Phone: 01634 716882 Fax: 01634 711557 www.kgmfireandsecurity.co.uk

K GM FI R E & S EC U R I TY DI S TR I BU TI O N Access Control Systems ICS Security Solutions are importers and manufacturers of security equipment with over 50 years of industrial knowledge. Our Product Ranges include... Exit Devices: A complete range of plastic, brushed stainless steel and touch sensitive buttons. Electrical Locking: A full range of electro-magnetic locks from micro to large double magnets. Comprehensive range of shear-locks, electric bolts, releases and door retaining magnets. Access Control: External and internal keypads with PIN or proximity access. Video Entry: A range of top quality mono and colour systems. Accessories: All the essential items you need to complete the installation from ICS. 10001 Mini Magnet 42.70 1001DS Mini Magnet unmonitored c/w door status 78.70 10004 Double mini magnet 86.70 CCL-A1 Audio entry kit 49.40 CP21 Break Glass Call Point, double pole 16.70 CP22-3WP Break Glass Call Point, waterproof 102.60 CP15 Break Glass Call Point, single pole 12.60 CP22-N Resettable Call Point, double pole 20.10 DG-15LD Standalone access keypad 86.40 DG-800 Access Control keypad 143.10 EB200 Electric bolt 111.10 DRB004F-PTE Exit Button, green dome finish PTE 28.20 B/B-G Green back box 5.00 KS001 Keyswitch, single pole action maintained 29.40 300AL Adjustable mini L bracket 9.80 M1-LOCK M1 lock, 12v electric release 17.60 M1-AUN/L24 M1 Lock, 24v c/w adjustable jaw, fail safe 59.40 M1-ALOCK24 M1 Lock, 24v c/w adjustable jaw, fail secure 40.50 MDL-01 Mechanical Door Lock 52.70 ONE-K1 Access control kit, one K1 200.50 ONE-K2 Access control kit, one K2 230.90 ONE-K4 Access control kit, one K4 230.90 ONE-K6 Access control kit, one K6 273.40 ONE-K8 Access control kit, one K8 279.50 PSU 12V 1A Power supply 12v 1A 51.30 PSU 12V 3A Power supply 12v 3A 54.00 K17063D Brass Shutter Lock - 63mm 22.90 K17070D Brass Shutter Lock - 70mm 25.90 K17090D Brass Shutter Lock - 90mm 37.10 K17580D Armoured Shutter Lock - 80mm 57.10 36 KGM Fire & Security Distribution Ltd, Unit A4, Spectrum Business Centre, Medway City Estate, Rochester Kent ME2 4NP

CCTV Systems The origin of the QVIS brand was established in March 2002 and has seen its market share grow year by year. After 20 years in the IT industry we saw an opportunity to migrate to the newly established digital CCTV market where we felt our IT background would serve us and our market sector well. With the introduction of Digital recorders and internet viewing our experience proved invaluable and allowed many installers to do what was inconceivable 5 years previous. We pride ourselves on innovation and we were the first to bring in a low cost DVR, which in hindsight was to revolutionize the industry. From this early stage we have striven to push boundaries and offer the best technology could provide. We were also the first company to release a DVR with an integrated CD Writer, JPEG2000 compression based DVR and the H.264 Realtime DVR, all of which went on to become industry standard products. Part No. Description List Price P400-E37-V2G40 EYE-600-FG EYE-600-FW DOME-G3S27-SF EYE-CM-FG EYE-E37-V2W EYE-E37-V2G-AF G3-CEILING-SF Bullet camera, 650 TVL Dome camera, Grey Dome camera, White Dome Camera, external, PTZ, 27 x optical zoom Dome camera, 600TVL, large housing Dome camera, White, varifocal Dome camera, grey, varifocal Ceiling mount for G3 PTZ 116.10 47.30 47.30 876.20 55.00 100.00 100.00 49.40 AVALON-4-500 I-ZEUS-16-2TB ZEUS-8-2TB ZEUS-L-8-500GB ZEUS-LX-8-1TB ZEUS-LX-16-1TB LCDHDMI-1905 LCDVGA-1905 RETCOMKIT4 Avalon DVR, 4 channel, 500GB I-Zeus HD DVR, 16 channel, 2TB Zeus HD DVR, 8 channel, 2 TB Zeus Lite LX DVR, 8 channel, 500GB Zeus LX DVR, 8 channel, 1TB Zeus LX DVR, 16 channel, 1TB 10 compact monitor c/w 4 channel 500GB DVR 19 HDMI security monitor 19 VGA security monitor 4 channel complete security system 235.20 700.00 627.20 249.20 288.40 327.60 491.40 417.20 266.00 712.00 TT-600 BNC002 DC2.2 DC2.1 BNC connector male to female BNC Crimp connectors DC plug adaptor for cameras, female DC plug adaptor for cameras, male 21.60 0.40 0.60 0.60 CAB20 SHOTGUN-100 SHOTGUN-150 20m pre-terminated power and video cable with BNC connectors Shotgun cable 100m Shotgun cable 150m 10.00 58.00 78.00 TEST-003 12V-10 20A-18 5A-4 TT-101A TTP111LJDK-SF TTP414V CCTV Tester Boxed PSU, 12V, 10A PSU 20A, 18 way In-Line PSU, 5A, 4 way Video Balun, 2 pack Video Balun Kit 4 channel video transceiver 267.30 59.40 88.40 19.60 7.00 11.20 49.40 37 Phone: 01634 716882 Fax: 01634 711557 www.kgmfireandsecurity.co.uk

K GM FI R E & S EC U R I TY DI S TR I BU TI O N Intruder Alarm Systems QVIS have been involved with the development of intruder and access control products for some years and we now supplying systems stemming from these efforts. Focussed on practical and innovative ideology, system technology includes wireless and hardwired equipment. In order to offer a complete intruder detection capability for all aspects of the market we offer systems for intruder detection, access control and time & attendance. ALARMKIT1 QVIS Wireless alarm system 210.00 Kit includes 1 x LCD screen, 2 x keyfob remote controllers, 1 x PIR motion detector, 1 x siren, 1 x door/window contact, 1 x PSU PIR DETECTOR-1 QVIS PIR Motion Detector 22.40 EX SIREN-1 QVIS External sounder unit with strobe 70.00 DOOR CONTACT-1 QVIS Wireless door and window contact 14.00 KIT-1 QVIS Hardwired video door intercom Kit 4 colour display 266.00 KIT-2 QVIS Hardwired video door intercom Kit 7 colour display 484.40 ACS-001 QVIS Biometric facial and fingerprint terminal 291.20 ACS-002 QVIS Biometric facial, fingerprint & PIN terminal 518.00 ACS-003 QVIS Biometric fingerprint access controller TCP, RS232 and RS485 238.00 ACS-004 QVIS Biometric fingerprint reader IP65 131.60 ACS-005 QVIS Biometric fingerprint reader with time & attendance 238.00 ACS-006 QVIS Biometric fingerprint reader with time & attendance with backup 568.40 ACS-007 QVIS Biometric fingerprint access controller - Standalone 319.20 38 KGM Fire & Security Distribution Ltd, Unit A4, Spectrum Business Centre, Medway City Estate, Rochester Kent ME2 4NP

Signaline Fixed Temperature Heat Sensing Cables Signaline Heat Sensing Cables is the new range of sensor cables from LGM Products. All of the cables are UK made and provide highly economic fire protection. Signaline Heat Sensing Cables are designed to be a versatile and low maintenance option for fire detection. Applications include; Car parks, Cable Trays, Floating Roof tanks, Warehouses, Tunnels, Escalators, Transport Termini, Cold Storage areas, Industrial Kitchens, Process Plants and Vehicles. Signaline Heat Sensing Cables are also extremely easy to make Intrinsically Safe offering an excellent low cost solution to Hazardous area heat detection. The World s No. 1 ASD brand VESDA by Xtralis very early warning smoke detection solutions provide the earliest possible warning of an impending fire hazard. VESDA buys time to investigate an alarm and initiate an appropriate response to prevent injury, property damage or business disruption. And because VESDA has the industry s widest sensitivity range and multi-level warnings, even minute levels of smoke can be detected before a fire has time to escalate. As the No. 1 ASD brand specified by fire professionals around the world, VESDA is synonymous with reliable, high-performance fire detection. How VESDA works VESDA works by continuously drawing air into a distributed pipe network via a high-efficiency aspirator. The air sample then passes through a dual-stage filter. The first stage removes dust and dirt from the air sample before it enters the laser detection chamber. The second, ultra-fine stage provides an additional clean-air supply to keep the detector s optical surfaces free from contamination, ensuring stable calibration and long detector life as well as minimizing nuisance alarms. From the filter, the air sample goes through the calibrated detection chamber where it is exposed to a laser light source. When smoke is present, light is scattered within the detection chamber and is instantly identified by the highly sensitive receiver system. The signal is then processed and presented via a bar-graph display, alarm threshold indicators and/or graphic display. VESDA detectors are able to communicate this information to a fire alarm control panel, a software management system, or a building management system via relays or a High Level Interface (HLI). Available soon from KGM. Keep in contact for further details 39 Phone: 01634 716882 Fax: 01634 711557 www.kgmfireandsecurity.co.uk