XSD-1402-53 Dry Cabinet Outstanding performance The XSD series has an outstanding performance for drying moisture sensitive components and pcb s. The 53 series offers you the possibility to remotely operate and control your drying cabinet (s). The dynamic drying unit of the 5000 series reaches very reliable low humidity values of 0,5% RH and automaticaly regenerates if necessary. As a result of an insulated double metal sandwich construction a precise temperature of 60 C can be reached with a very low power consumption. A radial fan and heater supports the drying process and realizes an equable temperature and moisture level in the cabinet. The relevant process data is obtained by use of an accurate Rotronic sensor.
Features Benefits User friendly handling ESD features Insulation Data logging sensor Sensor read out Touchscreen read out Interior lighting Door & humidity alarm buzzer Leveling out Lockable doors Sliding shelves U 5000 series drying unit Rotronic sensor Power supply Drying time (see reference table) Recovery time after door opening Temperature stability Temperature setting Energy saving consumption Remote control and operation Wifi IPC European Quality Maintenance Multifunctional full color touchscreen with easy menu structure Norm (IEC 61340-5-1) ESD stainless steel body (<10 3 Ohm/sq). Conductive glazing (in- and outside 10 3 Ohm/sq). 60 mm polyurethene sandwich construction Integrated data logger over sensor with standard 2000 measuring points. RS 232 interface (optional software required) Ethernet interface for communicating touchscreen (see data touchscreen) Low power consumption LED lighting Longer dooropenings are detected, high RH levels are detected Adjustable legs Every door can be locked seperately with a key. In height adjustable sliding shelves (5 pcs) 0.5% RH, made in Germany Precision sensor, accuracy +/-0,8 % RH, +/- 0,3 C Power cord 5 meter with IEC plug Level 3 component, 1,4 mm = 18 hours (60 C / 1% RH) < 6 minutes The same temperature level throughout the drying cabinet as a result of the use of a radial fan in combination with ventilation and heating canal in insolated sandwich construction. Accuracy +/- 2% Heating up to 60 C As a result of a Dynamic dry unit, sandwich construction with insulating Polyurethene. Touchscreen can be controlled from a distance through ethernet Optional According to IPC-Jstd 033C Made in Germany Easy to service, low maintenance Benefits touchscreen 7 full color HMI touchscreen Actual graphics of humidity and temperature History graphics from past 90 days Status from Dry unit and cabinet (dry unit fan,door, dry unit heater) Event log with information: start regeneration, temperature, login etc. Password protected for admin and operator Different settings for regeneration possible Firmware update by SD-card Global service through Ethernet N2 adjustment through touchscreen
Technical Data Cabinet External dimensions: (W x H x D) 1432 x 1930/2110 x 808 mm Internal dimensions: (W x H x D) 1315 x 1504 x 600 mm Weight: 230 kg Weight on shelf: 50 kg Shelves (WxD): 10 pcs, 535 x 550 mm. Volume: 1190 L Electric supply: 230 VAC (120 VAC optional) Power consumption: 500 W/h (60 C) Protection class: Class 1, hard grounded Humidity level cabinet: 0,5 % RH can be reached with drying unit U 5000 Sensor accuracy: +/- 0,8 % RH, +/- 0,3 C Temperature accuracy: 60 C, +/- 2 C Technical data touchscreen HMI panel: Display: 7 widescreen TFT Resolution: 800 x 480 pixels Brightness: 500 cd/m2 Contrast ratio: 500:1 Backlight type: LED Backlight life time: 30.000 hours Touch panel: 4-wire resistive type Processor: RISC 400 MHz with RTC RAM: 64 MB Storage: 128 MB (shared with OS) Ethernet: 10/100 Base-T SD-Card: Yes, on backside (for service / upgrade only) Dimensions (mm): Frontpanel: 280 x 130 / Mounting depth: 210 x 120 x 60 Protection Structure: IP20 Operating temperature: 0 C to 45 C Options: Multi-language user interface VNC remote control with password FTP access for downloading logs
Technical Data Rotronic Sensor HC2-S Based on the Airchip 3000 Technology use the HygroClip 2 probes can be used for control of temperature and humidity. The HygroClip 2 probes can be configured with the ROTRONIC HW4 software and share the following features: Measurement of relative humidity and temperature. Data recording of up to 2000 relative humidity and temperature value pairs. Programmable automatic sensor test with fail safe mode and sensor drift compensation. Technical Data dry-unit U 5000 series Dehumidifying performance: 120 g/h max. Minimal humidity 0,2% RH Dehumidifying Temperature 10 60 C Electric supply: 230 VAC (120 VAC available) Dimensions (L x B x H): 487 x 487 x 150 mm Weight: 14 kg
7 full color 53 HMI Touchscreen Settings: Main Actual status of humidity and temperature Trend Actual graphics of humidity and temperature History History graphics from past 90 days Light Switching of internal lightning Status Actual status drying unit and cabinet (heating, ventilation, door) Events Event log with data of the past 30 days Alarms Settings alarms Regeneration Setting automatically regeneration Settings Setting setpoint humidity and temperature Network TCP/IP network configuration Menu Different menu s available to choose System Setting of time / date / display Login Login / change of password Service service page
Performance test Display touchscreen Vaisala testconditions Instrument: Vaisala. Type of sensor: Rotronic sensor Accuracy of sensor: ± 1 % rh, ± 0,3 C Location of sensor: In the direct surrounding of cabinet sensor Ambient conditions: Humidity 50 ± 5% rh, 25 ± 2 C, Pressure 994 ± 20 hpa. Dooropenings: 2 dooropenings, 15 sec. (average RH 0,70%)
Technical Drawing XSD-1402-53 Dimensions mentioned in mm. Number of different types of shelves that can be mounted in cabinet (sizes are measured from the lowest shelf, at the bottom of the cabinet): Number of shelves (47000141) L/R compartment 5 6 7 8 9 10 11 12 13 14 15 Distance (in mm) between shelves if equaly devided 260 210 165 165 115 115 70 70 70 70 70 Remaining space between top shelf and top cabinet 235 190 235 40 235 90 430 330 235 140 40 Number of drawers 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Remaining space in mm 1366 1270 1174 1078 982 886 790 694 598 502 406 310 214 118 22
Technical Drawings Reel rack 20014005 25 502 25 Reel rack formation, 38 reels of 8mm can be placed in 1 reel rack, totally 304 reels. 553 Short strip Long strip Drawer divider system
Technical Drawings Shelves formation Different Feeder racks possible Honeycomb systems 2 pieces of honeycomb system 1 piece of honeycomb system
Options Honeycomb system, Flexible stainless steel storage system for IC Tubes components & PCB s. The width of the compartments is adjustable before installing the system in the cabinet. The number of compartments variates from 17 till 170. Item number 20050100 Additional Sliding Shelves, stainless steel sliding shelf, 100% extractable Item number 47000141 Drawer, stainless steel drawer Item number 47000127 Divider system drawer, Stainless steel divider system which enables you to create compartments with a minimum measurement of ± 2,5 x 2,5 cm or a multiple of 2,5 cm. A standard set contains 5 long strips (553 mm) and 5 short strips (502 mm). Item number 47000129 Cover plate for XSD shelves, prevent small items to fall through Item number 47000132 HygroClip 2, Probe with maximum accuracy for all climate measurements Item number 47000027 Exchange calibrated sensor: Item number 47000040
Options Humidity calibrator Hygropalm 22, presision measuring device for calibrating sensors Set including Hygroclip sensor, case and cable: Item number 20001019 Hygropalm only: Item number 20001016 SMD Reel rack with reel supports, L x W = 530 x 265 mm incl. 18 reel supports; Item number 20014005 Reel support, additional reel supports for reel rack: Item number 20014201 Door release pedal, This foot pedal enables you to open the door keeping your hands free Item number 47000146 Humidity alarm signal Lamp, two-color, (orange/green or red/green), magnetically fixed, providing optical signals on operational states and exceeded limit values. Opreates on 24 V. Item number orange/green 20016030 N2 auto flow system, The Auto-Flow-System is developed to use in combination with a Totech drying cabinet with 53 screen.the appliance can be adjusted and timer setted by the touchscreen and is used for the quick removal of moisture in the cabinet. The drying process is realized by using nitrogen (N²). Item number 22613004
Options X Feeder System, This feederrack is suitable for Siemens X Feeder systems. Item number:46204004 S Feeder System, This feederrack is suitable for Siemens S Feeder systems. Item number: 46204009 HW4-E software, Standard edition for use with 1 cabinet. Rotronic HW4 is a process oriented, validated software for use with the Rotronic line of digital humidity-temperature instruments. Item number 47000034 HW4-P software, Professional Edition for use with several cabinets. Rotronic HW4 is a process oriented, validated software for use with the Rotronic line of digital humidity-temperature instruments. Item number 47000031 Rotronic datalogger set, Including Software HW4-E-V3 and Cable AC3006 Item number 47000580 Sensor accuracy: +/- 0,8 % RH, +/- 0,3 C TP Link, Pre installed acces point on XSD 53 series Item number 47000095