SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SONY GLOBAL MANUFACTURING & OPERATIONS CORPORATION EMC/RF TEST LABORATORY - MAIN LAB 8-4 Shiomi Kisarazu-shi Chiba-ken, 292-0834, Japan Mr. Koichi.Hiyaoka Phone: 81 438 37 2750 Email: Koichi.Hiyaoka@sony.com ELECTRICAL (EMC) 1 Valid to: October 31, 2019 Certificate Number: 3203.01 In recognition of the successful completion of the A2LA accreditation is granted to this laboratory to perform the following electrical tests: Test Technology Test Method(s): 1 Emissions Radiated Emissions Up to 40 GHz 47 CFR, FCC Part 15 B (Using ANSI C63.4:2014); EN 55022; EN 55022:2006+A1:2007; EN 55022:2010; CISPR 22; AS/NZS CISPR 22; AS/NZS CISPR 22:2009 (Incorporating Amendment No 1); ICES-003; CISPR 13; EN 55013; EN 55013:2013; EN 55013:2001 (Incorporating Corrigendum No 1 and Amendments Nos 1 and 2); J55013; J55013(H22); CISPR 32; EN 55032; EN 55032:2015 (Excluding Table A.7); EN55032:2012; CISPR14-1; EN55014-1; EN55014-1:2006+A1:2009+A2:2011 (Excluding Annex B); VCCI-CISPR 32:2016 (Excluding Table A.7); CISPRJ 32:2017 (Excluding Table A.7) Radiated Disturbance VCCI V-3 (up to 6 GHz) (Section 6.5) Conducted Emissions 47 CFR, FCC Part 15 B (Using ANSI C63.4:2014); EN 55022; EN 55022:2006+A1:2007; EN 55022:2010; CISPR 22; AS/NZS CISPR 22; AS/NZS CISPR 22:2009 (Incorporating Amendment No 1); ICES-003; CISPR 13; EN 55013; EN 55013:2013; EN 55013:2001 (Incorporating Corrigendum No 1 and Amendments Nos 1 and 2); J55013; J55013(H22); CISPR 32; EN 55032; EN 55032:2015; EN 55032:2012; CISPR14-1; EN55014-1; EN55014-1:2006+A1:2009+A2:2011; VCCI-CISPR 32:2016; CISPRJ 32:2017; Conducted Disturbance VCCI V-3 (Section 6.3) (A2LA Cert. No. 3203.01) Revised 06/05/2018 Page 1 of 4
Radio Communications (900MHz, 2.4GHz and 5 GHz) FCC 47, CFR Part 15C (using ANSI C63.10:2013); FCC 47, CFR Part 15E (using ANSI C63.10:2013); KDB 789033; KDB 905462; EN 300 328; EN 300 328 V1.9.1 (2015-02); EN 301 489-3; EN 301 489-3 V1.6.1 (2013-08); EN 301 489-17; EN 301 489-17 V2.2.1 (2012-09); EN 301 893; EN 301 893 V1.8.1 (2015-03); EN 300 440; EN 300 440-1 V1.6.1 (2010-08); EN 300 440-2 V1.4.1 (2010-08); RSS-GEN; RSS-210; RSS-247 Cellular EN 301 489-7; EN 301 489-7 V1.3.1 (2005-11); EN 301 489-24; EN301 489-24 V1.5.1 (2010-10) Wireless (RFID) (13.56 MHz) FCC 47 CFR Part 15C (using ANSI C63.10:2013); EN 300 330; EN 300 330-1 V1.8.1 (2015-03); EN 300 330-2 V1.6.1 (2015-03); EN 301 489-3; EN 301 489-3 V1.6.1 (2013-08); RSS-GEN; RSS-210 GPS EN 300 440; EN 300 440-1 V1.6.1 (2010-08); EN 300 440-2 V1.4.1 (2010-08); EN 303 413; EN 301 489-3; EN 301 489-3 V1.6.1 (2013-08) Canadian Broadcasting Standard BETS-7 (Section 4.1) Immunity Current Harmonics IEC 61000-3-2; IEC 61000-3-2:2005+A1:2008+A2:2009; EN 61000-3-2; EN 61000-3-2:2014; EN 61000-3-2:2006+A1:2009+A2:2009; EN 61000-3-2:2006+A2:2009 Voltage Fluctuations and Flicker IEC 61000-3-3; EN 61000-3-3; EN 61000-3-3:2008; EN 61000-3-3:2013; EN 61000-3-3:1995+A1:2001 Electrostatic Discharge IEC 61000-4-2; EN 61000-4-2; EN 61000-4-2:2009; EN 61000-4-2:1995+A1:1998+A2:2001; JIS C 61000-4-2 Radiated Immunity IEC 61000-4-3; EN 61000-4-3; EN 61000-4-3:2006+A1:2008+A2:2010; JIS C 61000-4-3 Electrical Fast Transient/Burst IEC 61000-4-4; EN 61000-4-4; EN 61000-4-4:2012; EN 61000-4-4:2004; EN 61000-4-4:2004+A1:2010; JIS C 61000-4-4 (A2LA Cert. No. 3203.01) Revised 06/05/2018 Page 2 of 4
Immunity (cont.) Surge Immunity IEC 61000-4-5; IEC 61000-4-5:2005; EN 61000-4-5; EN 61000-4-5:2014; EN 61000-4-5:2006; JIS C 61000-4-5 Conducted Immunity IEC 61000-4-6; IEC 61000-4-6:2003+A1:2004+A2:2006; EN 61000-4-6; EN 61000-4-6:2014; EN 61000-4-6:2009; EN 61000-4-6:2007; JIS C 61000-4-6; JIS C 61000-4-6:2006 Power Frequency Magnetic Field IEC 61000-4-8; EN 61000-4-8; EN 61000-4-8:2010; EN 61000-4-8:1993+A1:2001; JIS C 61000-4-8 Voltage Dips and Interruptions IEC 61000-4-11; EN 61000-4-11; EN 61000-4-11:2004; JIS C 61000-4-11 Specific Absorption Rate (SAR) FCC OET No. 65, Supplement C; FCC 47 CFR, Part 2.1093; IEEE 1528:2013; KDB 865664; KDB 447498; RSS 102; EN 50360; EN 50360:2001+A1:2012; EN 50566; EN 50566:2013; EN 62209-1; IEC 62209-1; EN 62209-1:2006; EN 62209-1:2016; EN 62209-2; IEC 62209-2; EN 62209-2:2010; EN 62311; EN 62311:2008; Article 14-2 of the Ordinance Regulating Radio Equipment; Radiocommunications (Electromagnetic Radiation Human Exposure) Standard Generic and Product Family Standards CISPR 24; EN 55024; EN 55024:2010; CISPR 20; EN 55020; EN 55020:2007+A11:2011; CISPR 11 (Group 1); CISPR 11:2009+A1:2010 (Group 1); EN 55011 (Group 1); EN 55011:2009+A1:2010 (Group 1); EN 55011:2007 (Group 1); CISPR14-2; EN55014-2; EN55014-2:1997+A1:2001+A2:2008; IEC61000-6-1; EN61000-6-1; EN61000-6-1:2007; IEC61000-6-3; EN61000-6-3; EN61000-6-3:2007+A1:2011 Medical IEC 60601-1-2 Ed. 4:2014 (except home healthcare environment and special environment); IEC 60601-1-2 Ed. 3:2007 (except life-supporting equipment, EN 60601-1-2 Ed. 4:2015 (except home healthcare environment and special environment); EN 60601-1-2:2007 (except life-supporting equipment, JIS T0601-1-2:2012 (except life-supporting equipment, IEC 60601-2-18:2009 (Clause 202); IEC 60601-2-37:2007 (Clause 202.6) Automotive 2 RF Conducted Emissions CISPR 25 (Section 6.3); CISPR 25 Ed.4:2016 (Section 6.3); CISPR 25 Ed. 2:2002, Ed. 3:2008 (Section 6.2) (LV components only) (A2LA Cert. No. 3203.01) Revised 06/05/2018 Page 3 of 4
Automotive 2 (cont.) RF Radiated Emissions CISPR 25 (Section 6.5); CISPR 25 Ed. 4:2016 (Section 6.5); CISPR 25 Ed. 2:2002, Ed. 3:2008 (Section 6.4) (LV components only) Electrical Transient Conducted Emissions Electrical Transient Conducted Immunity ISO 7637-2 (Section 4.3); ISO 7637-2 Ed. 2:2004, Ed. 3:2011 (Section 4.3) ISO 7637-2 (Section 4.4); ISO 7637-2 Ed. 2:2004, Ed. 3:2011 (Section 4.4) 1 For standards or methods listed on the scope of accreditation without a revision date, laboratories are expected to be competent in the use of the current version within one year of the date of publication of the standard test method or upon the date specified by the standard test method originator when the originator has implementation authority. When a superseded standard or method is required for an accredited test, the scope will include the superseded date/version. 2 The tests include all relevant pre-compliance measurements in context of a homologation testing in accordance to the automotive standards of UN-ECE R10 Rev.5; Rev. 4 (e/e) Regulation or the EMC directive. Testing Activities Performed in Support of FCC Declaration of Conformity and Certification in Accordance with 47 Code of Federal Regulations and FCC KDB 974614, Appendix A, Table A.1 3 : Rule Subpart/Technology Test Method Maximum Frequency Unintentional Radiators Part 15B ANSI C63.4:2014 40 GHz Intentional Radiators Part 15C ANSI C63.10:2013 40GHz U-NIII without DFS Intentional Radiators Part 15E ANSI C63.10:2013 40GHz RF Exposure Devices Subject to SAR Requirements IEEE Std 1528:2013 6GHz 3 Accreditation does not imply acceptance to the FCC equipment authorization program. Please see the FCC website (https://apps.fcc.gov/oetcf/eas/) for a listing of FCC approved laboratories. (A2LA Cert. No. 3203.01) Revised 06/05/2018 Page 4 of 4
Accredited Laboratory A2LA has accredited SONY GLOBAL MANUFACTURING & OPERATIONS CORPORATION EMC/RF TEST LABORATORY - MAIN LAB Chiba-ken, Japan for technical competence in the field of Electrical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 9 th day of October 2017. President and CEO For the Accreditation Council Certificate Number 3203.01 Valid to October 31, 2019 For the tests to which this accreditation applies, please refer to the laboratory s Electrical Scope of Accreditation.