Submersible Supply Pump Packages ccessory for qua-ontrol, 7, S, Eco, S, Eco, -HT Break / Header Tank Systems 3 V versions - for qua-ontrol, 7, S, Eco, -HT Break / Header Tank Systems, Item Nº: 333, 333, 333, 3333, 338, 348, 348, 3484, 348, 3488, 349, 349, 3494, 349 4 V versions - for qua-ontrol S and Eco), Item Nº: 3373, 3374, 337, 337, 3377 Typical applications: For use within commercial rainwater harvesting and greywater recycling systems. Low pressure pump range I to VII for lifting applications. High pressure range VIII to XV for pressurized distribution. For pumping of prefiltered water. For qua-ontrol systems to pump water from the non-potable water storage tank to the qua-ontrol unit. For -HT Break Tank Systems to pump water from the main non-potable water storage tank to the break tank. For -HT Header Tank Systems to pump water from the main non-potable water storage tank to the header tank. Features: Single or multi-stage submersible pump with hydraulic assembly positioned under the motor which is cooled by the pumped liquid. Silent running lifting or pressure pump with continuous service asynchronous submersible induction motor, standard or double mechanical seal, corrosion resistant stainless steel hardware and casing with integrated handle Suction side kit with. m x 4 mm floating extraction including coarse filter, non return valve, float ball, brass fittings and hose clamps Pressure side kit with. m x 4 mm pressure hose including brass fittings - reducer, hose connector and 9 elbow hose-connector to MDPE Pipe ( ½ x mm) Nylon lifting rope with stainless steel carabiner and fixing kit onnection box including fixing kit for the extension of the power supply cable Functioning principle: The submersible supply pump packages are used in non-potable water systems, mainly in such with underground storage tanks. The floating extraction on the suction side of the submersible pump ensures optimal water quality by extracting the non-potable water from the cleanest layer, approx. cm below the surface. quality Trading & onsulting Ltd. Tel: 84 777 November 3, Rev
For qua-ontrol units, 7, S and Eco, the submersible supply pumps are used in water reclamation systems where the non-potable water storage tank is located outside the maximum suction distance of the self-priming booster pump set of integrated the qua-ontrol unit (refer to diagram in relevant qua-ontrol specification sheet). For qua-ontrol S and Eco the submersible supply pumps are used if the end of the suction pipe within the non-potable water storage tank is below the installation level of the integrated non-self priming booster pump set. In water reclamation systems using the -HT Break Tank concept the submersible supply pumps are used to lift the water from the main non-potable water storage tank to the Break Tank for further distribution to non-potable water applications via booster pump set. In water reclamation systems using the Header Tank concept the submersible supply pumps are used to lift the water from the main non-potable water storage tank to the Header Tank for further distribution to non-potable water applications via gravity. Powersupply, on/off switch and dry-run protection of the submersible pumps are provided via the qua-ontrol unit or respective via the -HT Break / Header Tank System control panel. Possible supply pump arrangements are single duty pump, duty/assist double pump set or duty/standby double pump set. Recommended accessories: onnection set for second supply pump ( 333) for double submersible pump arrangement. Technical data for submersible supply pumps I to III: Supply pump package: For the : Product code: Height (mm) Diameter (mm) eneral details Weight (kg) Max. pressure head (m) Max. flow rate (l/min) Max. temperature Main power supply Nominal current Electrical details Power output μf lass of protection: lass of isolation: Number of revolutions (min-): I II III - - - - - - - - - 333 3373 333 3374 333 337 73 3 3 7 4.8 8... 7 3. 7 8 º 3º 3 V 4 V 3 V 4 V - Hz 3 V 4 V.3..8 4.4....74.4 8 8 F 8 quality Trading & onsulting Ltd. Tel: 84 777 November 3, Rev
Technical data submersible supply pumps IV to XI: eneral details Electrical details Supply pump package: For the : Product code: Hight (mm) Diameter (mm) Weight (kg) Max. pressure head (m) Max. flow rate (l/min) Max. temperature Main power supply Nominal current Power output μf lass of protection: lass of isolation: Number of revolutions (min-): IV V VI VII VIII IX X XI - - - - - - - - - - - - - - - - - - - - 3333 337 377 3377 377 338 348 348 3483 3484 348 348 3487 3488 3489 474 84 3 7 9 4 3.8 7.4 3. 8.74 3. 43.3 9.. 7.7 7.3 7 7. 8 8. 9 4 7 33 3 7 8 3º 4º º 4º 3 V 4 V 4 V 3 V 3 V 3 V 4 V 3 V 4 V 3 V 4 V 3 V 4 V 7.3. 3. 3.3. 9.... 3.7.. 4.4....7.8...4 3 4 8 8 F 8 9 8 quality Trading & onsulting Ltd. Tel: 84 777 November 3, Rev
Technical data submersible supply pumps IV to XI: eneral details Electrical details Supply pump package: For the : Product code: Hight (mm) Diameter (mm) Weight (kg) Max. pressure head (m) Max. flow rate (l/min) Max. temperature Main power supply Nominal current Power output μf lass of protection: lass of isolation: Number of revolutions (min-): XI XII XII I - - - - - - - - - 3488 3489 349 349 349 3493 7 97 3 4 8 8. 9 9. 7 7. 7 8 8 4º 3 V 4 V 3 V 4 V 3 V 4 V...4 7.8..9..8.7 3 8 F 8 XI V XV - - - - - - 3494 349 349 3497 7 97 8 8. 9 9. 4 77 3 V 4 V 3 V 4 V...4 7.8..9 3 quality Trading & onsulting Ltd. Tel: 84 777 November 3, Rev
Materials and general dimensions: omponent Pump casing, pumpcasing cover, motor casing; SP package SP package SP package SP package SP package # VIII, IX, X, XI, # I # II, III, IV, V # VI # VII XII Stainless steel ISI 34 Pump impeller Stainless steel ISI 34 elastomeric plastic, reinforced with bichromate iron ST IRON UNI ISO 8 ST IRON UNI ISO 8 XIII, XIV, XV, XVI Stainless steel ISI 34 Techno polymer Base Material Stainless steel ISI 34 glass loaded polypropylene Stainless steel ISI 34 Motor Shaft ISI 33 + ISI 33 ceramic coated shaft sleeve ISI 33 (wet extension) stainless steel ISI 4 ST IRON UNI ISO 8 Stainless steel ISI 34 Mechanical Seal eramic/arb on/nbr/ Lip seal: NBR Double, with interposed oil chamber upper in carbonceramic/nbr - lower in Si/Si/NBR Silicon carbide alumina oxide. Si Double, with interposed oil chamber upper in carbonceramic/nbr - lower in Si/Si/NBR Power supply cable length Power supply cable type Pressure hose length Floating extraction length Lifting rope length m m m H RNF H7 RNF H7 RNF. m. m 3 m neoprene rubber power cable x(4x,)+(x,) H7 RNF Pressure hose connection mm dia quality Trading and onsulting Ltd. reserves the right to make technical changes. quality Trading & onsulting Ltd. Tel: 84 777 November 3, Rev
Pumps curves low pressure pump range I to VII for lifting applications Pumps curves high pressure range VIII to XV for pressurization Head [m] quality Trading & onsulting Ltd. Tel: 84 777 November 3, Rev