Delayed Egress System DORMA EMDE

Delayed Egress System DORMA EMDE

Delayed Egress System EMDE-1000 Series Delayed Egress Systems Designed to meet NFPA Life Safety Code 101, Special Locking Arrangements, these U.L. listed, self-contained systems provide an alarm output contact for remote signaling. This feature makes these systems ideal for deterring shoplifting, employee theft, and wandering patients. The EMDE-1000 provides field-selectable verbal exiting instructions or an audible tone. The verbal instructions are field-selectable as a male voice with security message or a female voice with safety message. Instructions can be programmed by DORMA to be pronounced in two varying languages. The EMDE also contains a visual display counting down the time remaining until the door opens. The programmable language feature makes this unit ideal for use in international airports and applications worldwide. EMDE-1011MS EMDE-1011MS (single model) - For use with single doors equipped with: Mortise or rim mount exit devices Surface or concealed vertical rod exit devices Mortise or cylindrical locksets EMDE-1011MT EMDE-1011MT (tandem model) - For use on pairs of doors when activation of either door unlocks both doors equipped with: Mortise or rim exit devices with mullion Surface or concealed vertical rod exit devices; armatures and magnets are split to accommodate various latch spacing Mortise or cylindrical locksets Annunciation The EMDE-1000 Series incorporates an alternating 75 db tone and verbal message with a digital countdown display and sign that provides clear and comprehensive instructions for persons without prior knowledge of door operation. This is especially significant for those who are blind or hearing impaired. Technical Details Dual voltage 12 VDC or 24 VDC Field-selectable voice notification or tone Voice notification includes alternating voice and 75 db alarm Field-selectable male security message: Tone Exit in twelve seconds, Security has been alerted Field-selectable female safety message: Tone Exit in twelve seconds, Facility Staff has been alerted 1650 lb holding force Digital countdown display Field-selectable nuisance delay 1 or 2 seconds Selectable 15 or 30 second exit delay, may be permanently field fixed Field-selectable door movement trigger only, external device trigger only, or activation by either door movement or external device trigger Field-selectable door prop alarm Field-selectable automatic or manual power up after emergency release or power loss Can be programmed by DORMA for BOCA (Building Officials and Code Administrators) requirements 1 second nuisance, 15 second release and 30 second relock; BOCA cannot be field-modified Integrated key switch for alarm reset, power up, sustained bypass, and timed bypass. Adjustable for 1, 15, 20, or 30 seconds Single or multi-door zone control and reset capability Can be used with a panic devise using a request to exit switch (DORMA MS Switch) and thru-wired hinge Comes with the required door sign, Push until alarm sounds. Door can be opened in 15 (30) seconds. 2

Operation The exit door is normally closed, latched, and secured by the EMDE magnetic lock with the digital display showing 15 or 30 to indicate the door is secure. Applying less than 15 lb of pressure and/or releasing the door latch (accompanied with a request to exit switch) activates the nuisance timer and nuisance alarm tone. If the pressure and activation is terminated prior to the preset nuisance timer (1 or 2 seconds), the alarm stops and the digital readout returns to 15 or 30 to indicate the door is secure. When the activation exceeds the nuisance time (1 or 2 seconds), an irreversible process begins that will unlock the door in a total of 15 or 30 seconds (2 + 13 or 2 + 28). The digital readout will count down and the alarm tone and verbal instructions alternate. Male Security Message Tone Exit in twelve seconds, Security has been alerted Female Safety Message Tone Exit in twelve seconds, Facility Staff has been alerted Tone Only (in lieu of message) Activation: Short beeps Lock Release: Long beeps The door unlocks after the 15 or 30 second time has elapsed and the digital display indicates 00. The alarm tone and verbal instruction continue to alternate. The lock must be manually reset unless the LK Option is selected when ordering the product. This option allows remote reset and on/off controls. BOCA (Building Officials and Code Administrators) Operation The exit door is normally closed, latched, and secured by the EMDE magnetic lock with the digital display showing 15 to indicate the door is secure. Applying less than 15 lb of pressure and/or releasing the door latch (accompanied with a request to exit switch) activates the nuisance timer and nuisance alarm tone. If the pressure and activation is terminated prior to the preset nuisance timer (1 second), the alarm stops and the digital readout returns to 15 to indicate the door is secure. When the activation exceeds the nuisance time (1 second), an irreversible process begins that will unlock the door in a total of 15 seconds (1 +14). The digital readout will count down and the alarm tone and verbal instructions alternate. Male Security Message Tone Exit in twelve seconds, Security has been alerted Female Safety Message Tone Exit in twelve seconds, Facility Staff has been alerted Tone Only (in lieu of message) Activation: Short beeps Lock Release: Long beeps The door unlocks after the 15 (14 +1) second time has elapsed and the digital display indicates 00. The alarm tone and verbal instruction continue to alternate. The door must be opened and closed. After 30 seconds the BOCA EMDE automatically relocks and the annunciation stops. Opening the door prior to end of the relocking cycle will restart the cycle. Certification The DORMA EMDE-1011MS and EMDE-1011MT Series are listed by U.L. and C.U.L. under their continuing reinspection programs. FWAX Special locking arrangements. Mechanical Specifications EMDE-1011MS: 11" L 2-3/4" H 2-5/8" D EMDE-1011MT: Master - 11" L 2-3/4" H 2-5/8" D Slave - 11" L 2-3/4" H 2-5/8" D EMDE Armature: 7-3/8" L 2-3/8" H 9/16" D Electrical Specifications Voltage: Dual 12/24 VDC ± 10% Current Draw: 1011MS - 830 ma @12 VDC, 450 ma @ 24 VDC 1011MT - 1500 ma @12 VDC, 850 ma @24 VDC Wiring: Screw terminal blocks Standard Inputs (Dry Contacts): Reset Input - Normally open N/O Request to Exit - Normally open N/O Trigger - Normally open N/O (used only with exit device activation) Fire Alarm - Normally closed N/C (contact from fire panel) Standard Monitoring Outputs: Alarm Output - SPDT 1 Amp Lock Secure Output - SPDT 1 Amp Optional Monitoring Outputs: BA - Bond alert SPDT 250 ma DPS - Door position switch SPDT 250 ma ATS - Anti-tamper switch SPDT 1 Amp 3

Annunciators Annunciators The remote control and annunciator panels are specially designed for use with the delayed egress units. Each panel has an audible alarm and a minimum of one tri-color LED door status indicator with nomenclature marking for: Green - Secure Yellow - Alarm Red - Unlocked LED Off - Bypass Single door and four door models are available. All panels are supplied on stainless steel single or double gang faceplates. Mechanical Specifications: Faceplate: 22 gauge stainless steel Electrical Specifications: LED: Tricolor, 12 to 24 VDC, 20 ma max. per LED Key Switch: 6 Amp @ 125 VAC maximum Push Switch: 5 Amp @ 125 VAC maximum L101-1A - Remote or local single door annunciator with built-in audible alarm and (1) tricolor LED door status indicator. Mounted on a stainless steel single gang faceplate. P101-4AM - Remote or local (4) door annunciator with built-in audible alarm, alarm mute pushbutton and (4) tricolor LED door status indicators. Mounted on a stainless steel double gang faceplate. K101-1AK - Remote or local single door annunciator with dual function key switch for bypass (on/off) and reset, built-in audible alarm, and (1) LED door status indicator. Mounted on a stainless steel double gang faceplate. Accepts standard 1-1/8" or 1-1/4" mortise key cylinder (not included). P101-PAM - Remote or single door annunciator with (3) push-button switches for momentary access, bypass (on/off) and muting of the audible alarm. One LED door status indicator and built-in audible alarm. Mounted on a stainless steel double gang faceplate. K702R-6 - Remote reset key switch. Momentary SPDT dry contact, 6 Amp @ 125 VAC maximum. Accepts standard 1-1/8" or 1-1/4" mortise key cylinder (not included). K707R-6 - Remote reset key switch with dual function for bypass (authorized egress) and reset. Two (2) momentary SPDT dry contacts, 6 Amp @ 125 VAC maximum. Accepts standard 1-1/8" or 1-1/4" mortise key cylinder (not included). K708R-6 - Remote reset key switch for bypass (on/off) and reset. One (1) maintained and one (1) momentary SPDT dry contact, 6 Amp @ 125 VAC maximum. Accepts standard 1-1/8" or 1-1/4" mortise key cylinder (not included). P402R - Remote reset pushbutton switch. Momentary SPDT dry contact, 5 Amp @ 125 VAC maximum. SN-101SA-B4 - Surface mount external speaker with 93 db alarm. For 101 Series. 5" wide 7-1/4" high 2-3/4" deep. RMB-101AL - Surface mount alarm with 100 db alarm (not shown). 5

Finishes Options How to Order Finishes Standard Finish: Aluminum: 628 (Satin). Optional Finishes: Bronze: 710 (Dark). Black: 711. Optional Plated Finishes: Brass: 605 (Bright) or 606 (Satin). Bronze: 611 (Bright) or 612 (Satin). Chrome: 625 (Bright) or 626 (Satin). 1011MS - Single Door Model. 1011MT - Tandem Door Model. Includes one standard 1011MS and one additional standard lock with a trigger mechanism, for pairs of doors. Pushing either door unlocks both doors in 15 or 30 seconds. Options BA - Bond Alert Sensor: Provides monitoring of proper or improper armature contact. It detects reduced holding power, tampering, dirt or foreign material between the lock and the armature, or low operating voltage. The bond alert sensor may also be internally wired to activate the egress alarm to indicate tampering, such as an attempt to apply an obstruction. Alarm reset cannot be accomplished until any obstruction is removed and full locking power is restored (two required for tandem units). DPS-101S - Door Position Sensor: Provides remote monitoring of the door open or closed status and indicates the door has actually been opened for egress after alarm activation (two required for tandem units). ATS - Anti-Tamper Switch: Detects any attempt to remove the access cover (two required for tandem units). LK - Less Key Switch: The system is provided without the standard key switch. Reset and On/Off controls may be accomplished by a remote switching such as access control, key switch, push switch, or another lock with a built-in key switch. PS - Push Switch: The standard key switch is replaced by a pushbutton switch for reset. DT - Special Delay Time: 8, 10, or 12 seconds may be specified. 15 and 30 second exit delay times are standard. PRG-BOCA - One second nuisance delay, 15 seconds exit delay, 30 seconds relock (as stated in BOCA Operations). PRG-MEA - Zero seconds nuisance delay, zero seconds exit delay. VOICE-SP - Voice instruction in Spanish. DV - Bilingual instructions for English/Spanish. How to Order EMDE Series Series EMDE EMDE -1 011MS 1,650 lb, Grade 1 Voice/Audible Model 1,650 lb Tandem Locks 011MT for Double Doors 1,650 lb Single 011MS -1 Model UBC, California Building Code Compliant BOCA, National Building Code, and Chicago Building Compliant BD LK NOTE: All combinations of features and options are not available for all models. BD NA Option 1 K LK PS Option 2 Options 3 (multiple options can be ordered) DV-EFR Voice Alternates Eng/French DV-ESP Voice Alternates Eng/Spanish V-SP Voice in Spanish ATS Access Cover Tamper Switch DPS Door Position Switch BA Magnetic Bond Sensor Built-In Key Switch Less Built-In Key Switch Push Button Reset Switch in Lieu of Key Switch 628 605 Bright Brass 606 Satin Brass 611 Bright Bronze 612 Satin Bronze 625 Bright Chrome 626 Satin Chrome 628 Satin Anodized Aluminum (standard finish) 710 Satin Anodized Dark Oxidized Bronze 711 Anodized Flat Black Finish 4

Schematics [PWR] [FP] [LOCK] [GRN RL Y] [RED RL Y] [RM TRIG ][RESET][REX ] [ DPS ] [ BAS ] [ AT S ] - + C NC - + J6 NO C NCNOO C NC NO C NO C NO C NO C NO C NC NO C NC NO C NC REMOVE WHEN FP INPUT IS USED OFF ON ON 1 2 3 4 5 6 7 8 15 SEC. 30 SEC. RELEASE TIME* 1 SEC. 2 SEC.Z NUISANCE DELAY* POWER SUPPLY 12 0R 24VDC BL K GR N RED 1 30 20 15 REQUEST TO EXIT RELOCK DELAY (SEC) N/C FIRE ALARM INPUT REMOVE JUMPER J6 WHEN USED L 101-1A K702-6 REQUEST TO EXIT KEY SWITCH (OPTIONAL) REMOTE LOCKED VOICE & TONE INTERNAL UNLOCKED TONE ONLY TRIGGER TYPE PWR-UP OPTION VOICE/TONE TYPICAL REMOTE STATUS PANEL (OPTIONAL) K702-6 REMOTE RESET (OPTIONAL) MSG #1 FEMALE VOICE SAFETY MESSAGE MSG #2 MALE VOICE SECURITY MESSAGE MESSAGE TYPE Terminal Board Connections Monitoring Options POWER IN FP AUX LOCK GRN RLY RED RLY TRIGGER RESET REX NOT USED DPS BAS ATS + C NC + NO C NC NO C NC NO C NO C NO C NO C NC NO C NC NO C NC AUTO SENSING 12/24 VDC INPUT TO CLOSED FIRE CONTACT (REMOVE J6 WHEN USED) SLAVE / TANDEM LOCK CONTROL LOCK SECURE ALARM EXTERNAL TRIGGER SWITCH INPUT EXTERNAL RESET SWITCH INPUT REQUEST TO EXIT INPUT DOOR POSITION MAGNETIC BOND ALERT ANTI TAMPER DORMA Group North America www.dorma-usa.com DORMA Architectural Hardware DORMA Drive, Drawer AC Reamstown, PA 17567-0411 Telephone: (800) 523-8483 Facsimile: (800) 274-9724 E-mail: archdw@dorma-usa.com DORMA Canada 1680 Courtney Park Drive, Unit 13 Mississauga, Ontario L5T 1R4 Telephone: (800) 387-4938 Facsimile: (905) 670-5850 E-mail: sales@dormacanada.com DORMA Mexico, S. de R.L. de C.V. Astrónomos 28, Col. Escandón México, D.F. 11800 Del. Miguel Hidalgo Telephone: (52+55) 5272-6937 Facsimile: (52+55) 5272-6948 E-mail: operacion@dorma.com.mx Subject to change without notice 9.08CT 5M USA 07000295