Solaris Best in Class product design, inspection and manufacturing process

2014 Price List Prices Effective March 1, 2014

Solaris Steam Line; Quality from Start to Kitchen Highly experienced certified manufacturing employees implement best in class manufacturing process & materials. The results are an exemplary performance year over year. Solaris products are sold through our professional dealer partners. Parts and serviced is supported thru NSC, our National Service Co-op. Solaris Best in Class product design, inspection and manufacturing process Material traceability (316 s/s type 316L), heat numbers and chemical composition spec from mills (Mill can t substitute cheaper metal) Eco-friendly, cold spun kettle forming (no heat applied to bend metal) (No inherent metal fatigue) Hold points, welding rod spec s & welding logs (high quality welding rod material, can t deviate from weldments spec and standards) QA empowerment inspection standards Best in Class (manufacturing process can be stopped by any line worker or inspector) Weld maps, trace back signatures, welder certifications (all welders sign off and accountable for work, must be constantly tested & up-dated) Documentation of process U1 certified (highest level by American Society of Mechanical Engineers, ASME certified) Reserve head heat sink on gas kettles 2/3 jacketed (3/8 thick carbon steel boiler plate, absorb heat more efficiently and saves energy) IMPORTANT WATER FILTER NOTICE: Walter filtration system (page 19) are included on all Solaris Steam generators/boiler base models purchased from the price list. The Solaris Company will enhance brand value, reduce downtime, extend equipment life cycle and reduce the total cost of ownership. Solaris Approvals All Solaris equipment has the necessary approvals for each particular product. This is a list of all approvals we use in manufacturing the equipment. Specific approvals are applied to the appropriate product, Steamer, Kettle or Tilt Skillet. ASME ASME Electrical National Board Gas National Sanitation

Table of Contents Products Page Prison Package Options - Solaris offers a complete prison package program for all Solaris Steam Equipment. For pricing please call 570-497-5477 Skillets...2-3 Skillet Options & Accessories... 4 Kettles, Electric & Direct Steam...5-10 Kettles, Electric & Direct Steam-Options & Accessories... 11-14 Kettles, Gas...15 Kettles, Gas-Options & Accessories... 16 Kettle Stands & Tables...17 Oyster Cookers...18 Water Filtration System...19 Steamers, Counter & Floor...20-23 Steamers, Pressure & Pressureless... 24 Boiler Base Steam Units...25-27 Equipment Warranty...29 Filter Warranty & Equipment Returns... 31 Product Index Product Category Page 2PHC-100-A KETTLE OPTIONS 11 2PHC-40-A KETTLE OPTIONS 11 2PHC-60-A KETTLE OPTIONS 11 2PHC-80-A KETTLE OPTIONS 11 316L-100-A KETTLE OPTIONS 12,16 316L-125-A KETTLE OPTIONS 12 316L-150-A KETTLE OPTIONS 12 316L-60F-A KETTLE OPTIONS 12 316L-60-A KETTLE OPTIONS 12,16 316L-80-A KETTLE OPTIONS 12,16 316L-80F-A KETTLE OPTIONS 12 B14-20-A CONV & PRESSURE OPTIONS 27 B14-25-A CONV & PRESSURE OPTIONS 27 B14-30-A CONV & PRESSURE OPTIONS 27 B20-25-A CONV & PRESSURE OPTIONS 27 B20-30-A CONV & PRESSURE OPTIONS 27 B24-36-A CONV & PRESSURE OPTIONS 27 B24-42-A CONV & PRESSURE OPTIONS 27 B24-48-A CONV & PRESSURE OPTIONS 27 B25-30-A CONV & PRESSURE OPTIONS 27 B36-42-A CONV & PRESSURE OPTIONS 27 B36-48-A CONV & PRESSURE OPTIONS 27 B42-48-A CONV & PRESSURE OPTIONS 27 BFT-A CONV & PRESSURE OPTIONS 27 BS-610-A WATER FILTER 19 C-100-A KETTLE OPTIONS 11 Product Category Page C-10-A KETTLE OPTIONS 11 C-12G-A KETTLES 15 C-20-A KETTLE OPTIONS 11,16 C-30-A KETTLE OPTIONS 11,16 C-40-A KETTLE OPTIONS 11,16 C-60-A KETTLE OPTIONS 11,16 C-6-A KETTLE OPTIONS 11 C-80-A KETTLE OPTIONS 11 CC5-10-A WATER FILTER 19 CC5-20-A WATER FILTER 19 CE-24-S BOILER 25 CE-324-S BOILER 25 CE-336-S BOILER 25 CE-342-S BOILER 25 CE-348-S BOILER 25 CE-36-S BOILER 25 CE-42-S BOILER 25 CE-48-S BOILER 25 CG-14-S BOILER 25 CG-20-S BOILER 25 CG-314-S BOILER 25 CG-320-S BOILER 25 CG-325-S BOILER 25 CG-330-S BOILER 25 CH-100-A KETTLE OPTIONS 11 CH-20-A KETTLE OPTIONS 16 CH-30-A KETTLE OPTIONS 16 CH-40-A KETTLE OPTIONS 11,16 CH-60-A KETTLE OPTIONS 11,16 Product Category Page CH-80-A KETTLE OPTIONS 11 CMS-100-A KETTLE OPTIONS 13 CMS-10-A KETTLE OPTIONS 13 CMS-125-A KETTLE OPTIONS 13 CMS-12-A KETTLE OPTIONS 13 CMS-150-A KETTLE OPTIONS 13 CMS-20-A KETTLE OPTIONS 13 CMS-30-A KETTLE OPTIONS 13 CMS-40-A KETTLE OPTIONS 13 CMS-60-A KETTLE OPTIONS 13 CMS-6-A KETTLE OPTIONS 13 CMS-80-A KETTLE OPTIONS 13 CR-1-A KETTLE OPTIONS 11 CS-35-A WATER FILTER 19 CSD-1-A CONV & PRESSURE OPTIONS 27 DC-10-K KETTLES 6 DC-12-K KETTLES 6 DC-20-K KETTLES 6 DC-2-S PRESSURE STEAMER 24 DC-3-S PRESSURE STEAMER 24 DC-6-K KETTLES 6 DCX-2-24-S CONV STEAMER/KETTLE 22 DCX-2-36-S CONV STEAMER/KETTLE 22 DCX-10-24-S CONV STEAMER 23 DCX-10-36-S CONV STEAMER 23 DCX-10-10-S CONV STEAMER 23 DCX-10-6-S CONV STEAMER 23 DCX-16-36-S CONV STEAMER 23 DDA-2-S PRESSURE STEAMER 24 1a

Product Index Product Category Page DDA-3-S PRESSURE STEAMER 24 DDO-2S-A KETTLE OPTIONS 14 DDO-2T-A KETTLE OPTIONS 14 DDO-3S-A KETTLE OPTIONS 14 DDO-3T-A KETTLE OPTIONS 14 DF-12-A KETTLE OPTIONS 4,14 DF-12EX-A KETTLE STANDS 17 DF-18-A KETTLE OPTIONS 14,16 DF-18EX-A KETTLE STANDS 17 DF-RSH-A KETTLE OPTIONS 14,16 DL-100-K KETTLES 7 DL-125-K KETTLES 7 DL-150-K KETTLES 7 DL-20F-K KETTLES 7 DL-20-K KETTLES 7 DL-30F-K KETTLES 7 DL-30-K KETTLES 7 DL-40F-K KETTLES 7 DL-40-K KETTLES 7 DL-60F-K KETTLES 7 DL-60-K KETTLES 7 DL-80F-K KETTLES 7 DL-80-K KETTLES 7 DLT-100-K KETTLES 8 DLT-20F-K KETTLES 8 DLT-20-K KETTLES 8 DLT-30F-K KETTLES 8 DLT-30-K KETTLES 8 DLT-40F-K KETTLES 8 DLT-40-K KETTLES 8 DLT-60F-K KETTLES 8 DLT-60-K KETTLES 8 DLT-80-K KETTLES 8 DMF-12R-A KETTLE STANDS 17 DMF-18R-A KETTLE STANDS 17 DMF-6R-A KETTLE STANDS 17 DMS-30-K KETTLES 10 DMS-40-K KETTLES 10 DMS-60-K KETTLES 10 DMT-10-10-K KETTLES 9 DMT-10-K KETTLES 9 DMT-30-K KETTLES 10 DMT-40-K KETTLES 10 DMT-60-K KETTLES 10 DMT-6-6-K KETTLES 9 DMT-6-K KETTLES 9 DP-100-K KETTLES 6 DP-20F-K KETTLES 7 DP-20-K KETTLES 6 DP-30F-K KETTLES 7 DP-30-K KETTLES 6 DP-40F-K KETTLES 7 DP-40-K KETTLES 6 DP-60F-K KETTLES 7 DP-60-K KETTLES 6 DP-80F-K KETTLES 7 DP-80-K KETTLES 6 DPA-1-A CONV & PRESSURE OPTIONS 27 Product Category Page DP-KF-A KETTLE OPTIONS 14,16 DP-SH-A CONV & PRESSURE OPTIONS 14 DP-SH-A KETTLE OPTIONS 4,16,27 DPT-20-K KETTLES 8 DPT-30-K KETTLES 8 DPT-40-K KETTLES 8 DPT-60-K KETTLES 8 DPT-80-K KETTLES 8 DSIK-1-A KETTLE STANDS 17 DSIK-2-A KETTLE STANDS 17 EBVS-1-A CONV & PRESSURE OPTIONS 27 EBVS-2-A CONV & PRESSURE OPTIONS 27 EBVS-3-A CONV & PRESSURE OPTIONS 27 EC-6TW-K KETTLES 5 EC-10TW-K KETTLES 5 EC-12TW-K KETTLES 5 EC-20TW-K KETTLES 5 EC-2-S PRESSURE STEAMER 24 EC-3-S PRESSURE STEAMER 24 ECTRS-16-B SKILLET 2 ECTS-12-B SKILLET 2 ECX-2-24-S CONV STEAMER/KETTLE 22 ECX-2-36-S CONV STEAMER/KETTLE 22 ECX-10-24-S CONV STEAMER 23 ECX-10-36-S CONV STEAMER 23 ECX-10-10-S CONV STEAMER 23 ECX-10-6-S CONV STEAMER 23 ECX-16-36-S CONV STEAMER 23 ECX-2-36-S CONVECTION STEAMER 26 EDA-2-S PRESSURE STEAMER 24 EDA-3-S PRESSURE STEAMER 24 EI-1-A CONV & PRESSURE OPTIONS 27 EK-24-A KETTLE OPTIONS 13 EK-33-A KETTLE OPTIONS 13 EKVS-1-A KETTLE OPTIONS 13 EKVS-2-A KETTLE OPTIONS 13 EKVS-3-A KETTLE OPTIONS 13 EL-20F-K KETTLES 5 EL-20-K KETTLES 5 EL-30F-K KETTLES 5 EL-30-K KETTLES 5 EL-40F-K KETTLES 5 EL-40-K KETTLES 5 EL-60F-K KETTLES 5 EL-60-K KETTLES 5 EL-80-K KETTLES 5 ELT-100-K KETTLES 6 ELT-20-K KETTLES 6 ELT-30-K KETTLES 6 ELT-40-K KETTLES 6 ELT-60-K KETTLES 6 ELT-80-K KETTLES 6 ELTS-30-B SKILLET 3 ELTS-40-B SKILLET 3 EMT-10-10-K KETTLES 9 EMT-10-6-K KETTLES 9 EMT-10-K KETTLES 9 EMT-6-K KETTLES 9 EMTS-30-B SKILLET 3 Product Category Page EMTS-40-B SKILLET 3 EP-100-K KETTLES 5 EP-20-K KETTLES 5 EP-30-K KETTLES 5 EP-40-K KETTLES 5 EP-60-K KETTLES 5 EP-80-K KETTLES 5 EPX-3-S CONVECTION STEAMER 20 EPX-5-S CONVECTION STEAMER 20 ES-30-B SKILLET 2 ES-40-B SKILLET 2 ESVS-1-A SKILLET OPTIONS 4 ESVS-2-A SKILLET OPTIONS 4 ESVS-3-A SKILLET OPTIONS 4 ETS-30-B SKILLET 3 ETS-40-B SKILLET 3 GC-12-K KETTLES 15 GC-2-S PRESSURE STEAMER 24 GC-3-S PRESSURE STEAMER 24 GCX-2-24-S CONV STEAMER/KETTLE 22 GCX-2-36-S CONV STEAMER/KETTLE 22 GCX-2-44-S CONV STEAMER/KETTLE 22 GCX-10-24-S CONV STEAMER 23 GCX-10-36-S CONV STEAMER 23 GCX-10-6-S CONV STEAMER 23 GCX-10-10-S CONV STEAMER 23 GCX-16-36-S CONV STEAMER 23 GDA-2-S PRESSURE STEAMER 24 GDA-3-S PRESSURE STEAMER 24 GKVS-1-A KETTLE OPTIONS 16 GL-100E-K KETTLES 15 GL-20E-K KETTLES 15 GL-30E-K KETTLES 15 GL-40E-K KETTLES 15 GL-60E-K KETTLES 15 GL-80E-K KETTLES 15 GLT-20-K KETTLES 15 GLT-30-K KETTLES 15 GLT-40F-K KETTLES 15 GLT-40-K KETTLES 15 GLT-60-K KETTLES 15 GLTS-30-B SKILLET 3 GLTS-40-B SKILLET 3 GM-100-A KETTLE OPTIONS 13 GM-10-A KETTLE OPTIONS 13 GM-125-A KETTLE OPTIONS 13 GM-12-A KETTLE OPTIONS 13 GM-150-A KETTLE OPTIONS 13 GM-20-A KETTLE OPTIONS 13 GM-30-A KETTLE OPTIONS 13 GM-40-A KETTLE OPTIONS 13 GM-60-A KETTLE OPTIONS 13 GM-6-A KETTLE OPTIONS 13 GM-80-A KETTLE OPTIONS 13 GMS-12-A SKILLET OPTIONS 4 GMS-16-A SKILLET OPTIONS 4 GMS-30-A SKILLET OPTIONS 4 GMS-40-A SKILLET OPTIONS 4 GMT-10-10-K KETTLES 9 1b

Product Index Product Category Page GMT-10-6-K KETTLES 9 GMT-10-K KETTLES 9 GMT-6-K KETTLES 9 GMTS-30-B SKILLET 3 GMTS-40-B SKILLET 3 GS-30-B SKILLET 2 GS-40-B SKILLET 2 GSVS-1-A SKILLET OPTIONS 4 GSX-10HE-S CONVECTION STEAMER 21 GSX-16HE-S CONVECTION STEAMER 21 GSX-7HE-S CONVECTION STEAMER 21 GTS-30-B SKILLET 3 GTS-40-B SKILLET 3 HP-50-A KETTLE OPTIONS 8 KB-A KETTLE OPTIONS 14 KOL-1 PRISON OPTIONS 28 KT-26-A KETTLE STANDS 17 KT-40-A KETTLE STANDS 17 KT-50-A KETTLE STANDS 17 KT-64-A KETTLE STANDS 17 KT-72-A KETTLE STANDS 17 KT-80-A KETTLE STANDS 17 LCT-A CONV & PRESSURE OPTIONS 27 LM-114-A KETTLE OPTIONS 13 LM-151-A KETTLE OPTIONS 13 LM-18-A KETTLE STANDS 17 LM-227-A KETTLE OPTIONS 13 LM-23-A KETTLE OPTIONS 13 LM-24-A KETTLE STANDS 17 LM-303-A KETTLE OPTIONS 13 LM-36-A KETTLE STANDS 17 LM-379-A KETTLE OPTIONS 13 LM-38-A KETTLE OPTIONS 13 LM-45-A KETTLE OPTIONS 13 LM-474-A KETTLE OPTIONS 13 LM-568-A KETTLE OPTIONS 13 LM-76-A KETTLE OPTIONS 13 OB-2-1-27-G-K OYSTER COOKERS 18 OB-2-2-27-G-K OYSTER COOKERS 18 OB-4-1-48-E-K OYSTER COOKERS 18 OB-4-1-48-G-K OYSTER COOKERS 18 OB-4-2-54-E-K OYSTER COOKERS 18 OB-4-2-54-G-K OYSTER COOKERS 18 PC-1-A SKILLET OPTIONS 4 PC-3-A SKILLET OPTIONS 4 PC-4-A KETTLE OPTIONS 12 PRV-A CONV & PRESSURE OPTIONS 27 PS-12-A SKILLET OPTIONS 4 RL-28-A CONVECTION STEAMER 20 RL-28G-A CONVECTION STEAMER 20 RL-28X-A CONVECTION STEAMER 20 RL-34-A CONVECTION STEAMER 20 S-24-A KETTLE STANDS 17 S-30-A KETTLE STANDS 4 S-30-A SKILLET OPTIONS 17 S75-10-A CONVECTION STEAMER 20 SA-1-A KETTLE OPTIONS 11,16 SC-12-A SKILLET OPTIONS 4 Product Category Page SC-16-A SKILLET OPTIONS 4 SC-2-S PRESSURE STEAMER 24 SC-3-S PRESSURE STEAMER 24 SCDA-2-S PRESSURE STEAMER 24 SCDA-3-S PRESSURE STEAMER 24 SCK-1-A SKILLET OPTIONS 4 SCX-2-24-S CONV STEAMER/KETTLE 22 SCX-2-36-S CONV STEAMER/KETTLE 22 SCX-2-44-S CONV STEAMER/KETTLE 22 SCX-10-24-S CONV STEAMER 23 SCX-10-36-S CONV STEAMER 23 SCX-10-10-S CONV STEAMER 23 SCX-10-6-S CONV STEAMER 23 SCX-16-36-S CONV STEAMER 23 SCX-2-6-S CONV STEAMER/KETTLE 22 SD-24-A KETTLE STANDS 17 SD-30-12G-A KETTLES 15 SD-30-16-A SKILLET OPTIONS 4 SD-30-A KETTLE STANDS 4,17 SEPG-1-A CONVECTION STEAMER 21 SEVS-1-A CONVECTION STEAMER 21 SEVS-2-A CONVECTION STEAMER 21 SEVS-3-A CONVECTION STEAMER 21 SF-12-A KETTLE OPTIONS 4,14 SF-12EX-A KETTLE STANDS 17 SF-18-A KETTLE OPTIONS 14,16 SF-RSH-A KETTLE OPTIONS 14,16 SGVS-1-A CONVECTION STEAMER 20 SGVS-1-A CONVECTION STEAMER 21 SGVS-2-A CONVECTION STEAMER 21 SH-1-A KETTLE OPTIONS 14 SIP-2-A CONVECTION STEAMER 20 SK-1-A CONVECTION STEAMER 20 SPE-1-A SKILLET OPTIONS 4 SPI-12-A SKILLET OPTIONS 4 SPI-16-A SKILLET OPTIONS 4 SPI-30-A SKILLET OPTIONS 4 SPI-40-A SKILLET OPTIONS 4 SP-KF-A KETTLE OPTIONS 14,16 SP-SH-A CONV & PRESSURE OPTIONS 14,27 SP-SH-A KETTLE OPTIONS 4,16 SS-10-A WATER FILTER 19 SSB-10-A KETTLE OPTIONS 11 SSB-20-A KETTLE OPTIONS 11 SSB-6-A KETTLE OPTIONS 11 SSL-4-A CONVECTION STEAMER 20 STA-1-A KETTLE OPTIONS 12 STA-2-A KETTLE OPTIONS 12 STA-3-A KETTLE OPTIONS 12 STA-4-A KETTLE OPTIONS 12 STOK-A CONV & PRESSURE OPTIONS 27 SWL-1-A CONV & PRESSURE OPTIONS 27 SX-34EC-S CONVECTION STEAMER 21 SX-34GC-S CONVECTION STEAMER 21 SX-3-S CONVECTION STEAMER 20 SX-55EC-S CONVECTION STEAMER 21 SX-55GC-S CONVECTION STEAMER 21 SX-5G-S CONVECTION STEAMER 20 Product Category Page SX-5-S CONVECTION STEAMER 20 TBA-100-A KETTLE OPTIONS 12 TBA-100G-A KETTLE OPTIONS 12 TBA-20-A KETTLE OPTIONS 12 TBA-20G-A KETTLE OPTIONS 12 TBA-30-A KETTLE OPTIONS 12 TBA-30G-A KETTLE OPTIONS 12 TBA-40-A KETTLE OPTIONS 12 TBA-40G-A KETTLE OPTIONS 12 TBA-60-A KETTLE OPTIONS 12 TBA-60G-A KETTLE OPTIONS 12 TBA-80-A KETTLE OPTIONS 12 TBA-80G-A KETTLE OPTIONS 12 TKS-10-12-A KETTLE OPTIONS 14 TKS-20-A KETTLE OPTIONS 14 TKS-20G-A KETTLE OPTIONS 14 TKS-30-A KETTLE OPTIONS 14 TKS-30G-a KETTLE OPTIONS 14 TKS-40-A KETTLE OPTIONS 14 TKS-40G-A KETTLE OPTIONS 14 TKS-60-A KETTLE OPTIONS 14 TKS-60G-A KETTLE OPTIONS 14 TKS-6-A KETTLE OPTIONS 14 TKS-80-A KETTLE OPTIONS 14 TOC-1-K OYSTER COOKERS 18 TOC-2-K OYSTER COOKERS 18 TPS-1"/2"/3"-a KETTLE OPTIONS 16 TPS-1-A KETTLE OPTIONS 14 TPS-2-a KETTLE OPTIONS 14 TPS-3-A KETTLE OPTIONS 14 TSS-1"/2"/3"-A KETTLE OPTIONS 16 TSS-1-A KETTLE OPTIONS 14 TSS-2-A KETTLE OPTIONS 14 TSS-3-A KETTLE OPTIONS 14 TVS-3-A KETTLE OPTIONS 14,16 TVT-1-A KETTLE OPTIONS 14,16 TVT-1BP-A SKILLET OPTIONS 4 TVT-2-A KETTLE OPTIONS 14,16 TVT-2BP-A SKILLET OPTIONS 4 TVT-3-A KETTLE OPTIONS 14,16 YS-1-A CONV & PRESSURE OPTIONS 27 1c

Braising Pans and Skillets Electric Counter Tilting Skillets ECTS-12-B 12 45 191 87 9 kw $ 14,214 Electric Counter Tilting Skillets Manual Tilt - Gas with Electronic Ignition, Tilt Lock Feature Included ECTRS-16-B 16 61 220 100 7.5 kw $ 17,287 shown with optional SD-30-16 stand Electric & Gas Floor Tilting Skillets Manual Tilt - Gas with Electronic Ignition, Pour Strainer, 4 Vent Port and Spring Assist Cover. *Casters not available for these units. ES-30-B 30 114 545 247 12 kw $ 28,717 ES-40-B 40 151 710 322 15 kw $ 31,375 GS-30-B 30 114 550 250 100,000 BTU $ 33,895 GS-40-B 40 151 720 327 125,000 BTU $ 37,575 2

Braising Pans and Skillets Electric & Gas Tilting Skillets with Twin Console Manual Tilt, Pour Strainer, 4 Vent Port and Spring Assist Cover - Gas with Electronic Ignition ETS-30-B 30 114 530 240 18 kw $ 25,199 ETS-40-B 40 151 642 291 27 kw $ 30,035 GTS-30-B 30 114 684 310 80,000 BTU $ 34,726 GTS-40-B 40 151 725 328 100,000 BTU $ 38,522 Electric & Gas Tilting Skillets Electric Tilt, Pour Strainer, Pan Support, 4 Vent Port and Spring Assist Cover- Gas with Electronic Ignition. *casters not available for these units. ELTS-30-B 30 114 490 222 12 kw $ 28,308 ELTS-40-B 40 151 675 306 15 kw $ 30,930 GLTS-30-B 30 114 550 249 80,000 BTU $ 35,875 GLTS-40-B 40 151 736 334 100,000 BTU $ 38,149 Electric & Gas Tilting Skillets Hydraulic Tilt, Pour Strainer, 4 Vent Port, and Spring Assist Cover - Gas with Electronic Ignition EMTS-30-B 30 114 617 280 12 kw $ 34,318 EMTS-40-B 40 151 770 349 15 kw $ 38,891 GMTS-30-B 30 114 650 295 80,000 BTU $ 39,672 GMTS-40-B 40 151 825 374 100,000 BTU $ 44,265 3

Braising Pans and Skillets Options and Accessories (when ordered with original equipment) Countertop Options and Accessories (ECTS-12, ECTRS-16) Item Description SC-12-A Stainless Steel Lift-Off Cover for ECTS-12 $ 902 SC-16-A Stainless Steel Lift-Off Cover for ECTRS-16 $ 570 SPI-12-A Steam Pan Insert for ECTS-12 $ 1,044 SPI-16-A Steam Pan Insert for ECTRS-16 $ 988 SF-12-A 12 Single Pantry Faucet, includes bracket $ 786 DF-12-A 12 Double Pantry Faucet for ECTRS-12, includes bracket $ 1,124 PS-12-A Stainless Steel Perforated Strainer for ECTS-12 $ 665 S-30-A Stainless Steel Stand with Sliding Tray $ 3,534 SD-30-A Stainless Steel Stand with Sliding Pan $ 3,821 SD-30-16-A Stainless Steel Stand with Sliding Drawer for ECTRS-16 $ 3,983 GMS-12-A Etched Gallon Markings for ECTS-12 -for liters, Item No. LMS-45 $ 671 GMS-16-A Etched Gallon Markings for ECTRS-16 -for liters, Item No. LMS-61 $ 671 ESVS-1-A 380 or 415 Volts, 3 Phase, 50 Hz (specify) $ 1,689 ESVS-2-A 440, 460 or 480 Volts, 3 Phase, 60 Hz (specify) $ 1,689 ESVS-3-A 575 or 600 Volts, 3 Phase, 60 Hz (specify) $ 2,259 GSVS-1 380 or 415 Volts, 3 Phase, 50 Hz (specify) $ 1,069 Floor Options and Accessories (ETS, GTS, ELTS, GLTS EMTS, GMTS) Item Description PC-1-A Pan Carrier for ETS-30/40, GTS-30/40 $ 1,633 PC-3-A Pan Carrier for ES-30/40, GS-30/40 $ 1,633 SPI-30-A Steam Pan Insert for ETS, GTS, ELTS, GLTS EMTS, GMTS-30 $ 1,492 SPI-40-A Steam Pan Insert for ETS, GTS, ELTS, GLTS EMTS, GMTS-40 $ 1,699 SF-12-A 12 Single Pantry Faucet, includes bracket $ 786 DF-12-A 12 Double Pantry Faucet, includes bracket $ 1,124 SP-SH-A Single Pantry Spray Hose Assembly with Bracket $ 2,269 DP-SH-A Double Pantry Spray Hose Assembly with Bracket $ 2,823 TVT-1BP-A 1 1/2 Tangent Draw-Off Valve with Strainer $ 2,042 TVT-2BP-A 2 Tangent Draw-Off Valve with Strainer $ 3,010 GMS-30-A Etched Gallon Markings for liters, Item No. LMS-114 $ 671 GMS-40-A Etched Gallon Markings for liters, Item No. LMS-151 $ 671 SCK-1-A 4 All Swivel Casters, 2 with Foot Brakes - set of 4 (ETS/GTS) $ 1,598 SPE-1-A 3 Stainless Steel Plumbing Enclosures $ 1,366 ESVS-1-A 380 or 415 Volts, 3 Phase, 50 Hz (specify) $ 1,689 ESVS-2-A 440, 460 or 480 Volts, 3 Phase, 60 Hz (specify) $ 1,689 ESVS-3-A 575 or 600 Volts, 3 Phase, 60 Hz (specify) $ 2,259 GSVS-1 380 or 415 Volts, 3 Phase, 50 Hz (specify) $ 1,069 4

Electric Steam Kettles Electric Counter Tilting Kettles with Removable Elements, Type 316 Liner, 50 PSI EC-6TW-K 6 23 130 59 7.5 kw $ 14,071 EC-10TW-K 10 38 180 82 12 kw $ 16,264 EC-12TW-K 12 45 190 86 12 kw $ 18,145 EC-20TW-K 20 76 225 102 12 kw $ 19,774 Electric Steam Kettles - Stationary Pedestal 2/3 Jacketed with Removable Elements, Hinged Cover, 50 PSI and 2 Tangent Draw-off. EP-20/30/40 with type 316 liner. EP-60/80/100 with Spring Assist Cover. EP-20-K 20 76 196 89 12 kw $ 19,360 EP-30-K 30 114 226 103 15 kw $ 20,404 EP-40-K 40 151 255 116 18 kw $ 20,630 EP-60-K 60 227 390 177 18 kw $ 25,591 EP-80-K 80 303 445 202 18 kw $ 33,728 EP-100-K 100 379 480 218 24 kw $ 34,272 Electric Steam Kettles - Stationary Tri-Leg 2/3 Jacketed with Removable Elements, Hinged Cover, 50 PSI and 2 Tangent Draw-off. EL-20/30/40 with type 316 liner. EL-60/80/100 with Spring Assist Cover. EL-20-K 20 76 196 89 12 kw $ 19,360 EL-30-K 30 114 226 103 15 kw $ 20,404 EL-40-K 40 151 255 116 18 kw $ 20,630 EL-60-K 60 227 390 177 18 kw $ 25,591 EL-80-K 80 303 445 202 18 kw $ 33,728 EL-100-K 100 379 480 218 24 kw $ 34,272 Electric Steam Kettles - Stationary Tri-Leg Full Jacketed with Removable Elements, Spring Assist Cover, 50 PSI, and 2 Tangent Draw-off. EL-20F with type 316 liner. EL-20F-K 20 76 245 111 12 kw $ 21,986 EL-30F-K 30 114 375 170 15 kw $ 27,018 EL-40F-K 40 151 420 193 18 kw $ 34,088 EL-60F-K 60 227 460 209 24 kw $ 35,847 5

Electric and Direct Steam Kettles Electric Steam Kettles - Tilting Tri-Leg 2/3 Jacketed with Removable Elements. ELT-20/30/40 with type 316 liner, 50 PSI. ELT-60/80/100 with 4 legs. tri-leg shown ELT-20-K 20 76 296 134 12 kw $ 27,371 ELT-30-K 30 114 313 142 15 kw $ 28,656 ELT-40-K 40 151 352 160 18 kw $ 28,823 ELT-60-K 60 227 417 189 18 kw $ 34,938 ELT-80-K 80 303 520 236 18 kw $ 42,309 ELT-100-K 100 379 630 289 24 kw $ 50,612 Direct Steam Counter Tilt Kettles with type 316 liner and SCV-1 Steam Control Valve, 50 PSI. DC-6-K 6 23 44 20 Direct Steam $ 7,729 DC-10-K 10 38 61 28 Direct Steam $ 9,237 DC-12-K 12 45 70 32 Direct Steam $ 11,440 DC-20-K 20 76 95 43 Direct Steam $ 13,910 Direct Steam Kettles - Stationary Pedestal 2/3 Jacketed with Hinged Cover. 35 PSI and 2 Tangent Draw-off. DP-20/30/40 with type 316 liner. DP-60/80/100 with Spring Assist Cover. DP-20-K 20 76 155 70 Direct Steam $ 10,961 DP-30-K 30 114 180 82 Direct Steam $11,536 DP-40-K 40 151 190 86 Direct Steam $ 13,058 DP-60-K 60 227 265 120 Direct Steam $ 15,700 DP-80-K 80 303 308 140 Direct Steam $ 17,989 DP-100-K 100 379 360 163 Direct Steam $ 20,766 6

Direct Steam Kettles Direct Steam Kettles - Stationary Pedestal Full Jacketed with Hinged Cover. 35 PSI and 2 Tangent Draw-off. DP-20F with type 316 liner. DP-30/40/60F with Spring Assist Cover. DP-80F comes with Hinged Split Cover, 25 PSI. shown with optional faucet DP-20F-K 20 76 175 79 Direct Steam $ 13,140 DP-30F-K 30 114 240 109 Direct Steam $ 15,670 DP-40F-K 40 151 280 127 Direct Steam $ 17,782 DP-60F-K 60 227 320 145 Direct Steam $ 20,460 DP-80F-K 80 303 380 172 Direct Steam $ 34,156 Direct Steam Kettles - Stationary Tri-Leg 2/3 Jacketed with Hinged Cover. 35 PSI and 2 Tangent Draw-off. DL-20/30/40 with type 316 liner. DP- 60/80/100 with Spring Assist Cover. DL-125/150 with 4 legs and Hinged Split Cover. *DL-125 and DL-150 are equipped with 25 PSI DL-20-K 20 76 155 70 Direct Steam $ 10,905 DL-30-K 30 114 180 82 Direct Steam $ 11,536 DL-40-K 40 151 190 86 Direct Steam $ 12,100 DL-60-K 60 227 265 120 Direct Steam $ 15,044 DL-80-K 80 303 308 140 Direct Steam $ 17,237 DL-100-K 100 379 360 163 Direct Steam $ 19,966 DL-125-K* 125 474 425 193 Direct Steam $ 35,987 DL-150-K* 150 568 465 211 Direct Steam $ 40,695 Direct Steam Kettles - Stationary Tri-Leg Full Jacketed with Hinged Cover. 35 PSI and 2 Tangent Draw-off. DL-20F with type 316 liner. DL-30/40/60F with Spring Assist Cover. DL-80F with Hinged Split Cover, 25 PSI. shown with optional faucet DL-20F-K 20 76 175 79 Direct Steam $ 13,139 DL-30F-K 30 114 240 109 Direct Steam $ 15,670 DL-40F-K 40 151 280 127 Direct Steam $ 17,782 DL-60F-K 60 227 320 145 Direct Steam $ 20,459 DL-80F-K 80 303 380 172 Direct Steam $ 34,156 7

Direct Steam Tilt Kettles Direct Steam Kettles - Tilting Pedestal 2/3 Jacketed, Console Mounted Steam Inlet Valve, 35 PSI, DPT-20/30/40 with type 316 liner. DPT-20-K 20 76 230 104 Direct Steam $ 16,219 DPT-30-K 30 114 275 125 Direct Steam $ 16,935 DPT-40-K 40 151 320 145 Direct Steam $ 18,130 DPT-60-K 60 227 350 159 Direct Steam $ 20,575 DPT-80-K 80 303 410 186 Direct Steam $ 23,877 Direct Steam Kettles - Tilting Tri-Leg 2/3 Jacketed, Console Mounted Steam Inlet Valve, 35 PSI, DLT-20/30/40 with type 316 liner. DLT-60/80/100 with 4 legs. DLT-20-K 20 76 240 109 Direct Steam $ 16,219 DLT-30-K 30 114 285 129 Direct Steam $ 16,935 DLT-40-K 40 151 332 151 Direct Steam $ 18,079 DLT-60-K 60 227 365 166 Direct Steam $ 20,575 DLT-80-K 80 303 424 192 Direct Steam $ 23,877 DLT-100-K 100 379 480 218 Direct Steam $ 28,641 Direct Steam Kettles - Tilting Tri-Leg Full Jacketed, Console Mounted Steam Inlet Valve, 35 PSI, DLT-20F with type 316 liner. DLT-30F/40F/60F with 4 legs. DLT-20F-K 20 76 320 145 Direct Steam $ 18,624 DLT-30F-K 30 114 350 159 Direct Steam $ 21,140 DLT-40F-K 40 151 405 184 Direct Steam $ 24,497 DLT-60F-K 60 227 460 209 Direct Steam $ 29,327 HP-50-A 50 PSI (Optional) $ 918 8

Steam Tilt Kettles STANDARD Features Auto Steam Generator Blowdown Split Water Lines to Boiler and Cold Water Condenser CSD Boiler Code Package (Gas and Electric Only) Water Filter Steam Kettles on 24 Wide Broiler Cabinet Double Pantry Faucet, Steam Control Valve and Type 316 Liner. DMT-6-K 6 23 225 102 Direct Steam $ 16,350 DMT-10-K 10 38 245 111 Direct Steam $ 19,305 EMT-6-K 6 23 450 204 24 kw $ 35,563 EMT-10-K 10 38 470 213 24 kw $ 38,517 GMT-6-K 6 23 450 204 140,000 BTU $ 33,375 GMT-10-K 10 38 470 213 140,000 BTU $ 36,284 Steam Kettles on 36 Wide Broiler Cabinet Double Pantry Faucet, Steam Control Valve and Type 316 Liner. DMT-6-6-K 6+6 23+23 350 159 Direct Steam $ 24,074 EMT-6-6-K 6+6 23+23 600 272 24 kw $ 41,049 GMT-6-6-K 6+6 23+23 610 277 140,000 BTU $ 39,668 Steam Kettles on 42 Wide Broiler Cabinet Double Pantry Faucet, Steam Control Valve and Type 316 Liner. DMT-10-6-K 10+6 38+23 370 178 Direct Steam $ 27,432 DMT-10-10-K 10+10 38+38 390 177 Direct Steam $ 29,635 EMT-10-6-K 10+6 38+23 700 318 24 kw $ 45,409 EMT-10-10-K 10+10 38+38 720 327 24 kw $ 47,592 GMT-10-6-K 10+6 38+23 800 368 140,000 BTU $ 43,065 GMT-10-10-K 10+10 38+38 820 372 140,000 BTU $ 45,233 9

Modular Direct Steam Tilt and Stationary Kettles Direct Steam Tilt Kettles on Modular Base Cabinet 2/3 Jacketed, Spring Assist Cover, 2 Tangent Draw-off, 35 PSI, Hydraulic Lift, Steam Control Assembly, Swing Drain, Deck Mounted Faucet and Pan Carrier. DMT-30/40 with type 316 liner. Description Dimension WxHxD DMT-30-K 2/3 jacket, 30 gallon -36 cabinet 36 x41.5 x33 475 215 $ 33,294 DMT-40-K 2/3 jacket, 40 gallon -36 cabinet 36 x42.5 x33 525 239 $ 33,647 DMT-60-K 2/3 jacket, 60 gallon -42 cabinet 42 x47.62 x33 600 272 $ 36,374 Direct Steam Stationary Kettles on Modular Base Cabinet 2/3 Jacketed, Hinged Cover, 2 Tangent Draw-off, 35 PSI, Steam Control Assembly, Swing Drain and Deck Mounted Faucet. DMS-30/40 with type 316 liner. DMS-60 Comes Standard with Spring Assist Cover. Description Dimension WxHxD DMS-30-K 2/3 jacket, 30 gallon 36 x41.5 x33 425 193 $ 21,911 DMS-40-K 2/3 jacket, 40 gallon 36 x42.5 x33 475 215 $ 22,531 DMS-60-K 2/3 jacket, 60 gallon 42 x47.62 x33 525 239 $ 25,057 10

Electric and Direct Steam Kettle Options and Accessories (when ordered with original equipment) Kettle Lift Off Cover Item Description C-6-A 6 Gallon $ 429 C-10-A 10 Gallon $ 640 C-20-A 20 Gallon $ 711 C-30-A 30 Gallon $ 913 C-40-A 40 Gallon $ 1,008 C-60-A 60 Gallon $ 1,099 C-80-A 80 Gallon $ 1,260 C-100-A 100 Gallon $ 1,669 Kettle Spring Assist Cover Item Description CH-40-A 40 Gallon $ 3,116 CH-60-A 60 Gallon $ 3,222 CH-80-A 80 Gallon $ 4,064 CH-100-A 100 Gallon $ 4,790 SA-1-A Upgrade for kettle with standard yoke to spring assist $ 872 CR-1-A Add for Condensate Ring (factory installed) $ 565 Kettle Two Piece Hinged Cover (Stationary Kettles Only) Item Description 2PHC-40-A 40 Gallon $ 2,889 2PHC-60-A 60 Gallon $ 2,995 2PHC-80-A 80 Gallon $ 3,262 2PHC-100-A 100 Gallon $ 3,554 Single Perforated Stainless Steel Basket Item Description SSB-6-A 6 Gallon $ 812 SSB-10-A 10 Gallon $ 1,452 SSB-20-A 20 Gallon $ 1,452 11

Electric and Direct Steam Kettle Options and Accessories (when ordered with original equipment) Triple Perforated Stainless Steel Baskets Item Description TBA-20-A 20 Gallon, 2/3 Jacketed Kettle $ 3,232 TBA-30-A 30 Gallon, 2/3 Jacketed Kettle $ 3,348 TBA-40-A 40 Gallon, 2/3 Jacketed Kettle $ 3,348 TBA-60-A 60 Gallon, 2/3 Jacketed Kettle $ 3,348 TBA-80-A 80 Gallon, 2/3 Jacketed Kettle $ 4,936 TBA-100-A 100 Gallon, 2/3 Jacketed Kettle $ 4,936 Gas Kettles - Triple Perforated Stainless Steel Baskets TBA-20G-A 20 Gallon Kettle $ 3,232 TBA-30G-A 30 Gallon Kettle $ 3,348 TBA-40G-A 40 Gallon Kettle $ 3,348 TBA-60G-A 60 Gallon Kettle $ 3,348 TBA-80G-A 80 Gallon Kettle $ 4,936 TBA-100G-A 100 Gallon Kettle $ 4,936 Steam Control Options - Tilting and Stationary Direct Steam Kettle Item Description STA-1-A Steam control assembly consisting of line strainer, steam inlet globe valve and steam trap (used with DL and DP kettles) $ 1,079 STA-2-A Line strainer, steam trap (used with DLT and DPT kettles) $ 857 STA-3-A Line strainer, steam trap, safety valve (used with DC, 50 PSI) $ 1,270 STA-4-A Line strainer, steam trap, safety valve (used with TOC, 15 PSI) $ 1,270 Quick Chill System QCS-1-A For Direct Steam Kettles $ 10,693 Liner in Type 316 Stainless Steel (2/3 Jacketed) 316L-60-A 60 Gallon $ 1,891 316L-80-A 80 Gallon $ 1,891 316L-100-A 100 Gallon $ 1,891 316L-125-A 125 Gallon $ 2,002 316L-150-A 150 Gallon $ 2,002 Liner in Type 316 Stainless Steel (Full Jacketed) 316L-60F-A 60 Gallon $ 1,891 316L-80F-A 80 Gallon $ 2,001 Pan Support - Tilting Kettles PC-4-A 20-100 Gallon $ 1,875 12

Options and Accessories (when ordered with original equipment) Electrical Options for Kettles EKVS-1-A 380 or 415, 50 Hz, 3 Phase $ 1,034 EKVS-2-A 440, 460 or 480, 60 Hz, 3 Phase $ 1,064 EKVS-3-A 575 or 600, 60 Hz, 3 Phase $ 1,613 EK-24-A 24 kw Element for 40, 60, 80 and 100 Gallon s $ 479 EK-33-A 33 kw Element for 60, 80 and 100 Gallon s $ 1,155 Contour Measuring Strips CMS-6-A 6 Gallon Kettle $ 570 CMS-10-A 10 Gallon Kettle $ 570 CMS-12-A 12 Gallon Kettle $ 570 CMS-20-A 20 Gallon Kettle $ 570 CMS-30-A 30 Gallon Kettle $ 570 CMS-40-A 40 Gallon Kettle $ 570 CMS-60-A 60 Gallon Kettle $ 610 CMS-80-A 80 Gallon Kettle $ 610 CMS-100-A 100 Gallon Kettle $ 610 CMS-125-A 125 Gallon Kettle $ 610 CMS-150-A 150 Gallon Kettle $ 610 Etched Gallon Markings GM-6-A 6 Gallon Kettle $ 681 GM-10-A 10 Gallon Kettle $ 681 GM-12-A 12 Gallon Kettle $ 681 GM-20-A 20 Gallon Kettle $ 691 GM-30-A 30 Gallon Kettle $ 706 GM-40-A 40 Gallon Kettle $ 716 GM-60-A 60 Gallon Kettle $ 736 GM-80-A 80 Gallon Kettle $ 751 GM-100-A 100 Gallon Kettle $ 771 GM-125-A 125 Gallon Kettle $ 872 GM-150A 150 Gallon Kettle $ 973 Etched Liter Markings LM-23-A 23 Liter/6 Gallon Kettle $ 681 LM-38-A 38 Liter/10 Gallon Kettle $ 681 LM-45-A 45 Liter/12 Gallon Kettle $ 681 LM-76-A 76 Liter/20 Gallon Kettle $ 691 LM-114-A 114 Liter/30 Gallon Kettle $ 706 LM-151-A 151 Liter/40 Gallon Kettle $ 716 LM-227-A 227 Liter/60 Gallon Kettle $ 736 LM-303-A 303 Liter/80 Gallon Kettle $ 751 LM-379-A 379 Liter/100 Gallon Kettle $ 771 LM-474-A 474 Liter/125 Gallon Kettle $ 872 LM-568-A 568 Liter/150 Gallon Kettle $ 973 13

Options and Accessories (when ordered with original equipment) Tangent Draw-Off Valve Stationary Kettles TVS-3-A 3 in lieu of standard 2 $ 3,529 Tilting Kettles TVT-1-A 1 1/2 valve added to tilting kettle $ 1,986 TVT-2-A 2 valve added to tilting kettle $ 2,879 TVT-3-A 3 valve added to tilting kettle $ 5,395 Dairy Type Draw-Off Valves DDO-2T-A 2 Dairy draw-off valve for tilting kettles POA DDO-3T-A 3 Dairy draw-off valve for tilting kettles POA DDO-2S-A 2 Dairy draw-off valve for stationary kettles POA DDO-3S-A 3 Dairy draw-off valve for stationary kettles POA Pantry Faucets with Brackets SF-12-A 12 Single pantry faucet with bracket $ 786 DF-12-A 12 Double pantry faucet with bracket $ 1,124 SF-18-A 18 Single pantry faucet with bracket $ 842 DF-18-A 18 Double pantry faucet with bracket $ 1,230 SP-KF-A Single pantry valve with kettle filler with bracket $ 2,213 DP-KF-A Dual pantry valve with kettle filler with bracket $ 2,758 SP-SH-A Single pantry valve with spray hose with bracket $ 2,269 DP-SH-A Dual pantry valve with spray hose with bracket $ 2,823 SF-RSH-A Combination single faucet and 60 spray hose assembly $ 3,050 DF-RSH-A Combination double faucet and 60 spray hose assembly $ 3,368 KB-A Bracket Only $ 217 Tangent Draw-Off Valve Strainers Perforated Stainless Steel Strainer TPS-1-A 1 1/2 tangent draw-off valve $ 378 TPS-2-A 2 tangent draw-off valve $ 378 TPS-3-A 3 tangent draw-off valve $ 378 Solid Stainless Steel Disc TSS-1-A 1 1/2 tangent draw-off valve $ 378 TSS-2-A 2 tangent draw-off valve $ 378 TSS-3-A 3 tangent draw-off valve $ 378 SH-1-A Strainer Hook $ 176 Tilting Kettle Strainers Direct Steam and Electric Kettles TKS-6-A 6 Gallon Kettle $ 1,931 TKS-10-12-A 10-12 Gallon Kettle $ 1,931 TKS-20-A 20 Gallon, 2/3 Jacketed Kettle $ 1,931 TKS-30-A 30 Gallon, 2/3 Jacketed Kettle $ 1,931 TKS-40-A 40 Gallon, 2/3 Jacketed Kettle $ 1,931 TKS-60-A 60 Gallon, 2/3 Jacketed Kettle $ 2,642 TKS-80-A 80 Gallon, 2/3 Jacketed Kettle $ 2,642 Gas Fired Kettles TKS-20G-A 20 Gallon $ 1,931 TKS-30G-A 30 Gallon $ 1,931 TKS-40G-A 40 Gallon $ 1,931 TKS-60G-A 60 Gallon $ 2,642 14

Gas Kettles Gas Steam Kettles - Floor Base with Legs 2/3 Jacketed, Electronic Ignition, 50 PSI, Tilt Clean Lock Feature and Type 316 Liner GC-12-K 12 46 345 157 43,000 BTU $ 23,368 C-12G-A Stainless Steel Lift Off Cover $ 691 SD-30-12G-A Support Stand (factory installed) 34 lbs (16 kgs) $ 3,932 Gas Steam Kettles - Stationary with Legs 2/3 Jacketed with Hinged Cover, Electronic Ignition and 2 Tangent Draw-Off. GL-20/40 with Type 316 Liner, GL-60 with Spring Assist Cover, GL-80/100 with 4 legs. GL-20/30/40/60E with 50 PSI and GL-80/100E with 35 PSI GL-20E-K 20 76 440 200 100,000 BTU $ 29,987 GL-30E-K 30 114 575 261 100,000 BTU $ 32,816 GL-40E-K 40 151 600 272 100,000 BTU $ 33,245 GL-60E-K 60 227 720 327 130,000 BTU $ 34,778 GL-80E-K 80 303 950 430 150,000 BTU $ 48,365 GL-100E-K 100 379 1100 498 150,000 BTU $ 51,096 Gas Steam Kettles - Stationary Tri-Leg Full Jacketed with Spring Assist Cover, 50 PSI, Electronic Ignition and 2 Tangent Draw-Off. GL-40F-K 40 151 700 318 130,000 BTU $ 36,970 Gas Steam Kettles - Tilting Twin Console with Legs 2/3 Jacketed, Electronic Ignition, High Efficiency Burner, 50PSI, GLT-20/30/40 with Type 316 Liner GLT-20-K 20 76 700 318 80,000 BTU $ 44,356 GLT-30-K 30 114 900 408 100,000 BTU $ 45,606 GLT-40-K 40 151 930 422 100,000 BTU $ 46,433 GLT-60-K 60 227 1142 518 120,000 BTU $ 52,397 Gas Steam Kettles - Tilting with Legs Full Jacketed w/ 50 PSI, Electronic Ignition and High Efficiency Burner with Type 316 Liner GLT-40F-K 40 151 1100 499 120,000 BTU $ 53,965 15

Gas Kettles Options and Accessories (when ordered with original equipment) Gas Kettle Accessories and Options Item Description TVT-1-A 1 1/2 Tangent Draw-Off Valve (GLT s) $ 1,986 TVT-2-A 2 Tangent Draw-Off Valve (GLT s) $ 2,879 TVT-3-A 3 Tangent Draw-Off Valve (GLT s) $ 5,395 TVS-3-A 3 Tangent Draw-Off Valve (GL s) $ 3,529 C-20-A Lift Off Cover (GLT-20) $ 711 C-30-A Lift Off Cover (GLT-30) $ 913 C-40-A Lift Off Cover (GLT-40) $ 1,008 C-60-A Lift Off Cover (GLT-60) $ 1,099 CH-20-A Spring Assist Hinged Cover (GLT-20) $ 2,929 CH-30-A Spring Assist Hinged Cover (GLT-30) $ 3,091 CH-40-A Spring Assist Hinged Cover (GLT-40) $ 3,116 CH-60-A Spring Assist Hinged Cover (GLT-60) $ 3,222 SA-1-A Spring Assist Hinged Cover in place of Yoke type (GL-20, GL-40) $ 872 SF-18-A Single Pantry Faucet & Bracket (GL & GLT s) $ 842 DF-18-A Double Pantry Faucet & Bracket (GL & GLT s) $ 1,230 SP-KF-A Single pantry valve with kettle filler with bracket $ 2,213 DP-KF-A Dual pantry valve with kettle filler with bracket $ 2,758 SP-SH-A Single pantry valve with spray hose with bracket $ 2,269 DP-SH-A Dual pantry valve with spray hose with bracket $ 2,823 SF-RSH-A Combination single faucet and 60 spray hose assembly $ 3,050 DF-RSH-A Combination double faucet and 60 spray hose assembly $ 3,368 GKVS-1-A 220 or 240/1/50 Volts or 60 Hz $ 1,099 316L-60-A 60 Gallon $ 1,891 316L-80-A 80 Gallon $ 1,891 316L-100-A 100 Gallon $ 1,891 TPS-1 /2 /3 -A Perforated Stainless Steel Draw-Off Strainer $ 378 TSS-1 /2 /3 -A Solid Stainless Steel Draw-Off Disc $ 378 16

Stands and Kettle Tables Stands Height in / mm Width in / mm Depth in / mm Shipping Weight (lbs) S-24-A 18 457 24 610 21 533 40 $ 3,136 S-30-A 18 457 30 762 21 533 45 $ 3,534 SD-24-A 21 533 24 610 21 533 45 $ 3,686 SD-30-A 21 533 30 762 21 533 50 $ 3,822 LM-18-A 28 838 18 457 33 838 125 $ 6,206 LM-24-A 28 838 24 610 33 838 150 $ 6,983 LM-36-A 28 838 36 914 33 838 180 $ 8,178 Kettle Tables - with Sliding Tray and Drain Height in / mm Width in / mm Depth in / mm Shipping Weight (lbs) KT-26-A 22 559 26 660 24 610 140 $ 10,058 KT-40-A 22 559 40 1016 24 610 200 $ 13,733 KT-50-A 22 559 50 1270 24 610 225 $ 14,833 KT-64-A 22 559 64 1626 24 610 285 $ 15,241 KT-72-A 22 559 72 1829 24 610 315 $ 17,601 KT-80-A 22 559 80 2032 24 610 345 $ 19,516 SF-12EX-A Single Pantry Faucet & Extension $ 1,271 DF-12EX-A Double Pantry Faucet & Extension $ 1,613 DF-18EX-A Double Panty Faucet & Extension (2EC Kettles on Stand) $ 1,724 DMF-18R-A Deck Mounted Faucet & Extension $ 1,714 DMF-12R-A Deck Mounted Faucet & Extension $ 1,820 DMF-6R-A Deck Mounted Faucet & Extension $ 1,629 DSIK-2-A Interconnect Kit First Two Kettles $ 1,906 DSIK-1-A Each Additional Kettle Addition $ 600 17

Oyster Cooker STANDARD Features Auto Steam Generator Blowdown Split Water Lines to Boiler and Cold Water Condenser CSD Boiler Code Package (Gas and Electric Only) Oyster Cookers - Direct Steam Table Mount with Steam Control Valve and Oyster Cooker Cover Description TOC-1-K Oyster Cooker - 1 liter 25 11 $ 6,368 TOC-2-K Oyster Cooker - 2 liter 35 16 $ 7,497 Oyster Bar - Electric (24 kw) with Sink, Steam Control Valve and Oyster Cooker Cover, Water Filter Description OB-4-1-48-E-K Oyster Bar - 1 liter 390 177 $ 72,005 OB-4-2-54-E-K Oyster Bar - 2 liter 400 181 $ 77,138 Oyster Bar - Gas (140,000 BTU) with Sink, Steam Control Valve and Oyster Cooker Cover, Water Filter Description OB-2-1-27-G-K Oyster Bar -.52 liter 275 125 $ 44,407 OB-2-2-27-G-K Oyster Bar - 1.04 liter 285 129 $ 44,906 Oyster Bar - Gas (140,000 BTU) with Sink, Steam Control Valve and Oyster Cooker Cover, Water Filter Description OB-4-1-48-G-K Oyster Bar - 4 liter 415 188 $ 75,087 OB-4-2-54-G-K Oyster Bar - 8 liter 425 193 $ 80,693 18

Filtration System Water Filtration System Standard Features Twin series header configuration Drop-in style filter bowl housing Filter system header assembly installed onto formed stainless steel wall-mounting back-plate 5-micron carbon block cartridge for scale control SS-10-A ScaleStick cartridge for scale control Outlet pressure gauge pre-assembled onto header assembly Place an order for a steamer with a boiler or generator and the Water Filtration System is shipped NO CHARGE! Description CS-35-A Countertop steamer water filtration system $ 945 BS-610-A Double stacked or boiler base steamer water filtration system $ 1,040 Counter s: CS-35-A Floor s: BS-610-A * Proper filtration minimizes limescale and corrosion which will extend the life of your steamer. Replacement cartridges and ScaleSticks will usually last 4-6 months depending on water quality in your area. Periodically pressure gauge and clear ScaleStick bowl inspections will confirm replacement schedule for each cartridge and/or stick. CC5-10-A SS-10-A SS-10-A CC5-20-A Description SS-10-A ScaleStick replacement $ 163 CC5-10-A Countertop steamer replacement cartridge $ 47 each CC5-20-A Double stacked or boiler base model steamer replacement cartridge $ 73 each Filter cartridge replacement records must show scheduled 6-month & maintenance history to maintain warranty. Limited Second Year Warranty - complete details on page 30 The limited second year warranty covers these water related parts: Solenoids, probes, elements, high limit & preheat thermostats, atmospheric generator & pressure boiler shells, high limit controls. All other failed parts will be the owners responsibility. Second year warranty is limited to parts only, labor not include, as long as the prescribed preventative maintenance is followed. 19

Countertop 3 and 5 Pan Steamers Electric Counter Convection Steamer (Connectionless and Generatorless) 3 and 5 Pan Counter Steamers with Manual Controls,Manual Fill, Leveling Legs, type 316 liner Compartments EPX-3-S Electric 161 73 9 kw $ 11,621 EPX-5-S Connectionless and Boilerless 183 83 15 kw $ 12,060 RL-28X-A Stainless Steel Stand (height 28 ) for EPX only $ 1,765 S-EPXSS-A EPX Stacking Stand $ 3,131 Electric Counter Convection Steamer (with Generators) 3 and 5 Pan Counter Steamers with Manual Controls, Leveling Legs, Deliming Port and 3/8 Y-Strainer, type 316 liner and Water Filter SX-3-S SX-5-S Compartments Electric Generator with split water line Electric Generator with split water line 141 64 7.5 kw $ 13,099 169 77 15 kw $ 13,729 RL-28-A Stainless Steel Stand (height 28 ) $ 1,659 RL-34-A Stainless Steel Stand (height 34 ) $ 1,997 SSL-4-A Stainless Steel 4 Legs (standard on EPX-3 and EPX-5) $ 247 SK-1-A Stacking Kit for the SX models only $ 40 S75-10-A 7.5 kw Increased to 10kW $ 343 SIP-2-A Interconnect Plumbing for 2 Units (Factory Installed) $ 902 Gas Counter Convection Steamer 5 Pan Counter Steamer with Manual Controls, Pan Guides, 4 Legs, Deliming Port, Electronic Ignition, Split Water Line, type 316 liner and Water Filter Compartments SX-5G-S 1-5 Pan 250 113 42,000 BTU $ 20,938 RL-28G-A Stainless Steel Stand $ 1,976 SGVS-1-A 220/1/50 or 60 Hz Controls $ 1,069 20

Floor 7 and 10 PanSteamers Electric Convection Steamer On 24 Stainless Steel Cabinet or Open Leg Base, 7 & 10 Pan with Manual Controls, Pan Guides, Deliming Port, Split Water Line, type 316 liner, Individual Generators, and Water Filter Compartments SX-34EC-S 2-7 Pan 350 159 17.5 kw $ 27,860 SX-55EC-S 2-10 Pan 395 179 30 kw $ 31,380 SEVS-1-A 380/3/50 or 60 Hz Controls $ 2,032 SEVS-2-A 415/3/50 or 60 Hz Controls $ 2,032 SEVS-3-A 480/3/50 or 60 Hz Controls $ 2,032 SEPG-1-A Pan Guides in Cabinet Base (SX-34EC only) $ 413 Gas Convection Steamer On 24 Stainless Steel Cabinet, 7 and 10 Pan with Manual Controls, Pan Guides, Deliming Port, Electronic Ignition, Rear Flanged Feet, Split Water Line, type 316 liner, Individual Generators, and Water Filter Compartments SX-34GC-S 2-7 Pan 625 285 84,000 BTU $ 34,363 SX-55GC-S 2-10 Pan 675 305 84,000 BTU $ 36,637 SGVS-2A 220/1/50 or 60 Hz Controls $ 2,123 High Efficient/Energy Gas Convection Steamer On 24 Stainless Steel Cabinet, 5, 7, 10 and 16 Pan with Manual Controls, Pan Guides, Deliming Port, Electronic Ignition, Rear Flanged Feet, Split Water Line, type 316 liner, Individual Generators, and Water Filter Compartments GSX-7HE-S (1) 3 Pan and (1) 4 Pan 650 295 140,000 BTU $ 36,819 GSX-10HE-S (2) 5 Pan 700 318 190,000 BTU $ 38,563 GSX-16HE-S* (2) 8 Pan 900 408 190,000 BTU $ 48,506 SGVS-1-A 220/1/50 or 60 Hz Controls (1 compartment) $ 1,069 SGVS-2-A 220/1/50 or 60 Hz Controls (2 compartment) $ 2,123 21 * GSX-16HE standard with LCT-2 two compartment load compensating timer

6 Pan Convection Steamers/Kettles Auto Boiler Blowdown STANDARD Features Split Water Lines to Boiler and Cold Water Condenser CSD Boiler Code Package (Gas and Electric Only) Water Filter Convection Steamers On 24 and 36 Stainless Steel Cabinet Base, 6 Pan, Manual Controls, and type 316 liner Compartments 24 Cabinet Base DCX-2-24-S 2 450 204 Direct Steam $ 28,803 SCX-2-24-S 2 500 227 Steam Coil $ 38,644 ECX-2-24-S 2 550 249 24 kw $ 41,098 GCX-2-24-S 2 630 286 140,000 BTU $ 40,257 36 Cabinet Base DCX-2-36-S 2 550 249 Direct Steam $ 30,355 SCX-2-36-S 2 600 272 Steam Coil $ 40,206 ECX-2-36-S 2 650 255 24 kw $ 44,255 GCX-2-36-S 2 764 347 140,000 BTU $ 44,255 Convection Steamers and 6 Gallon Steam Kettle On 44 Stainless Steel Cabinet Base, 6 Pan, Manual Controls, and type 316 liner Compartments DCX-2-6-S 2 650 295 Direct Steam $ 43,150 SCX-2-6-S 2 700 318 Steam Coil $ 53,930 ECX-2-6-S 2 880 400 36 kw $ 54,715 GCX-2-6-S 2 980 445 200,000 BTU $ 55,351 Convection Steamers and 10 Gallon Steam Kettle On 48 Stainless Steel Cabinet Base, 6 Pan, Manual Controls and type 316 liner Compartments DCX-2-10-S 2 700 318 Direct Steam $ 45,928 SCX-2-10-S 2 750 340 Steam Coil $ 56,631 ECX-2-10-S 2 930 422 36 kw $ 57,518 GCX-2-10-S 2 1030 467 200,000 BTU $ 58,149 22

10 Pan Convection Steamers/Kettles 23 STANDARD Features Auto Steam Generator Blowdown Split Water Lines to Boiler and Cold Water Condenser CSD Boiler Code Package (Gas and Electric Only) Water Filter Convection Steamers On 24 and 36 Stainless Steel Cabinet Base, 10 Pan, Manual Controls and type 316 liner Compartments 24 Cabinet Base DCX-10-24-S 2 625 283 Direct Steam $ 31,213 SCX-10-24-S 2 575 260 Steam Coil $ 41,285 ECX-10-24-S 2 575 260 36 kw $ 45,046 GCX-10-24-S 2 670 304 200,000 BTU $ 47,088 36 Cabinet Base DCX-10-36-S 2 625 283 Direct Steam $ 31,948 SCX-10-36-S 2 625 283 Steam Coil $ 41,860 ECX-10-36-S 2 625 283 36 kw $ 49,820 GCX-10-36-S 2 840 381 200,000 BTU $ 51,862 Convection Steamers and 6 Gallon Steam Kettle On 44 Stainless Steel Cabinet Base, 10 Pan, Manual Controls and type 316 liner Compartments DCX-10-6-S 2 900 408 Direct Steam $ 45,979 SCX-10-6-S 2 1000 453 Steam Coil $ 55,582 ECX-10-6-S 2 900 408 36 kw $ 57,408 GCX-10-6-S 2 1000 453 250,000 BTU $ 57,407 Convection Steamers and 10 Gallon Steam Kettle On 48 Stainless Steel Cabinet Base, 10 Pan, Manual Controls and type 316 liner Compartments DCX-10-10-S 2 920 417 Direct Steam $ 48,076 SCX-10-10-S 2 1020 462 Steam Coil $ 57,654 ECX-10-10-S 2 920 417 36 kw $ 59,505 GCX-10-10-S 2 1020 462 200,000 BTU $ 59,505 Convection Steamers on 36 Stainless Steel Cabinet Base 16 Pan, Standard with Manual Controls and type 316 liner DCX-16-36-S 2 700 318 Direct Steam $ 37,675 SCX-16-36-S 2 750 340 Steam Coil $ 47,612 ECX-16-36-S 2 848 386 42 kw $ 52,341 GCX-16-36-S 2 940 431 300,000 BTU $ 52,341

Pressure and Pressureless Steamers with Automatic Timers and Universal Tray Guides Auto Steam Generator Blowdown Larger Pressure Compartment Steamer with Base Description Dimension EC-2-S EC-3-S 2 Compartment with Elec. Generator -24 kw holds 12 pans 3 Compartment with Elec. Generator -24 kw holds 18 pans * standard with 208, 230, 240/60/3 GC-2-S GC-3-S 2 Compartment with Gas Boiler-200,000 BTU holds 12 pans 3 Compartment with Gas Boiler-200,000 BTU holds 18 pans * standard with 115/60/1 controls only DC-2-S DC-3-S SC-2-S SC-3-S STANDARD Features Split Water Lines to Boiler and Cold Water Condenser CSD Boiler Code Package (Gas and Electric Only) Water Filter 2 Compartment with Direct Steam holds 12 pans 3 Compartment with Direct Steam holds 18 pans 2 Compartment with Steam Coil holds 12 pans 3 Compartment with Steam Coil holds 18 pans Do-All Compartment Cooker On 36 Stainless Steel Cabinet Base, Cooker all Stainless Steel Standard with Automatic Timers, Universal Pan Guides 36 x55.13 x33.88 960/435 $ 54,812 36 x68 x33.88 1100/500 $ 63,373 36 x55.13 x33.88 1100/500 $ 57,338 36 x68 x33.88 1170/531 $ 66,312 36 x55.13 x33.88 615/279 $ 36,053 36 x68 x33.88 810/367 $ 44,497 36 x55.13 x33.88 750/340 $ 48,661 36 x68 x33.88 984/446 $ 59,374 Compartments DDA-2-S 2 625 284 Direct Steam $ 43,236 SCDA-2-S 2 760 345 Steam Coil $ 52,452 EDA-2-S 2 970 440 42 kw $ 57,695 GDA-2-S 2 1110 503 250,000 BTU $ 58,482 DDA-3-S 3 825 372 Direct Steam $ 51,852 SCDA-3-S 3 994 451 Steam Coil $ 61,335 EDA-3-S 3 1110 503 42 kw $ 66,638 GDA-3-S 3 1180 535 250,000 BTU $ 66,639 24

Boiler Base Steam Units STANDARD Features Auto Steam Generator Blowdown Split Water Lines to Boiler and Cold Water Condenser CSD Boiler Code Package (Gas and Electric Only) Kettle Connection (see option STOK-pg. 27) Water Filter Boiler in 24 Cabinet Height in / mm Width in / mm Depth in / mm (lbs/kgs) CE-24-S 28 711 24 610 33 838 24 kw 350/159 $ 22,536 CE-36-S 28 711 24 610 33 838 36 kw 350/159 $ 24,149 CE-42-S 28 711 24 610 33 838 42 kw 350/159 $ 25,863 CE-48-S 28 711 24 610 33 838 48 kw 350/159 $ 26,171 CG-14-S 28 711 24 610 33 838 140,000 BTU 375/170 $ 25,198 CG-20-S 28 711 24 610 33 838 200,000 BTU 375/170 $ 26,998 Boiler in 36 Cabinet Height in / mm Width in / mm Depth in / mm (lbs/kgs) CE-324-S 28 711 36 914 33 838 24 kw 390/177 $ 24,250 CE-336-S 28 711 36 914 33 838 36 kw 415/188 $ 25,859 CE-342-S 28 711 36 914 33 838 42 kw 415/188 $ 27,568 CE-348-S 28 711 36 914 33 838 48 kw 475/215 $ 29,745 CG-314-S 28 711 36 914 33 838 140,000 BTU 450/204 $ 26,927 CG-320-S 28 711 36 914 33 838 200,000 BTU 475/215 $ 28,631 CG-325-S 28 711 36 914 33 838 250,000 BTU 475/215 $ 28,757 CG-330-S 28 711 36 914 33 838 300,000 BTU 475/215 $ 31,162 25

Guidelines for Choosing Boiler Size Available Kettle for Common Steamers Using A Steam Take-off Input Additional Kettle GCX-2-S GCX-2-36-S ECX-2-S ECX-2-36-S (voltage over 208 only) standard 140,000 BTU optional 200,000 BTU standard 140,000 BTU optional 200,000 BTU optional 250,000 BTU optional 300,000 BTU standard 24kW optional 36 kw optional 42 kw standard 24kW optional 36 kw optional 42 kw optional 48 kw 10 gallon 20 gallon 10 gallon 30 gallon 40 gallon 50 gallon N/A 30 gallon 40 gallon N/A 20 gallon 40 gallon 40 gallon Boiler Steam Output Gas BTU Input Gas lbs. per hour 140,000 BTU 100 200,000 BTU (24 base) 110 200,000 (36 base) 138 250,000 BTU 155 300,000 BTU 183 Electric kw Input 24 kw 70 36 kw 107 42 kw 128 Steam Coil Incoming Pressure 20 PSI 90 30 PSI 138 40 PSI 172 50 PSI 207 Steam Requirements Kettle (Gallons) lbs. per hour* 6 11 10 22 20 44 30 66 40 88 60 132 80 176 100 220 Each 6 Pan Steam Compartment 30 Each 10 Pan Steam Compartment 45 * at 10-15 PSI at the kettle, use of higher steam pressures (20-50 PSI) will reduce heat up time 5-20% Direct steam kettles require a steam trap for operation. Depending on the installation, a steam trap, inlet globe valve, pressure reducing valve, line strainer, and/or ball float trap must be installed with suitable piping and plumbing fittings. These items may be ordered as an option at extra cost from Solaris or may be provided by others. Foodservice boilers have a limited steam reservoir. When multiple pieces of equipment are powered by a single boiler, each kettle or compartment should be heated sequentially, allowing the boiler to recover pressure before starting the next piece of equipment. Boiler drain lines discharge hot condensate and steam which may affect the operation of the boiler or other equipment. Drain outlets should be plumbed indirectly to a floor drain outside the confines of the boiler and away from other equipment. Remote boiler sizing requires consideration of the size, length and type of pipe used, as well as the number of bends and joints. Solaris recommends the use of a professional Foodservice consultant or mechanical engineer for remote boiler specification. 26

Boiler Base Steam Units Options and Accessories (when ordered with original equipment) Convection Steamer and Boiler Options and Accessories Item Description B24-36-A 24 kw increased to 36 kw $ 1,371 B24-42-A 24 kw increased to 42 kw $ 2,833 B24-48-A 24 kw increased to 48 kw (voltage over 208 only) $ 3,101 B36-42-A 36 kw increased to 42 kw $ 2,183 B36-48-A 36 kw increased to 48 kw (voltage over 208 only) $ 2,430 B42-48-A 42 kw increased to 48 kw (voltage over 208 only) $ 2,339 B14-20-A 140,000 BTU increased to 200,000 BTU $ 2,254 B14-25-A 140,000 BTU increased to 250,000 BTU $ 3,701 B14-30-A 140,000 BTU increased to 300,000 BTU $ 5,853 B20-25-A 200,000 BTU increased to 250,000 BTU $ 1,452 B20-30-A 200,000 BTU increased to 300,000 BTU $ 3,600 B25-30-A 250,000 BTU increased to 300,000 BTU $ 2,148 CSD-1-A Boiler Code $ 3,010 SP-SH-A Single Pantry Spray Hose with Bracket $ 2,269 DP-SH-A Double Pantry Spray Hose with Bracket $ 2,823 PRV-A Pressure Regulating Valve (10-40 PSI) $ 1,366 BFT-A Ball Float Trap $ 2,551 STOK-A Steam Take Off Kit $ 449 DPA-1-A Deliming Kit (not available on steam coil and with CSD-1 option) $ 771 LCT-1-A One Compartment Load Compensating Timer $ 736 LCT-2-A Two Compartment Load Compensating Timer $ 1,472 YS-1-A Water in Y-Strainer $ 166 EI-1-A Electrical Ignition for Gas Boilers $ 1,477 EBVS-1-A 380 or 415 Volts, 60Hz 3 Phase $ 1,059 EBVS-2-A 440, 460 or 480 Volts, 60 Hz 3 Phase $ 1,059 EBVS-3-A 575 or 600 Volts, 60 Hz 3 Phase $ 1,623 27