Neotronics Impact & Impact Pro The Impact range of portable multi-gas monitors is able to monitor and display up to four gases simultaneously
Impact Personal multi-gas monitors Reliable Operation Pre-calibrated plug-in sensor cartridge High specification sensors Patented Surecell toxic sensors Stable and accurate Easy to Use One button on/off Multi-lingual, intuitive menu system On screen prompts guide user Built-in correction factors for flammable gases Minimal training required Easy to Maintain Plug-in operation for all serviceable parts Cartridge replacement in less than one minute Re-calibration in less than two minutes when using Enforcer Minimized cost of ownership Durable Housing Waterproof to IP67 Rugged and impact resistant Built for everyday use Alarm Indication 3 levels of instantaneous alarm, time weighted average alarms on toxic Periodic confidence flash and bleep Increasingly rapid flashing, ultra-bright alarm LEDs Powerful two tone audible alarm Vibrating alarm for noisy environments* Safelink communications* User Friendly Pre-entry Check Peak hold function and drop line Hand aspiration Built-in automatic pump* Totally flexible *Impact Pro model only The Impact range of portable multi-gas monitors is able to monitor and display up to four gases simultaneously. Using high specification flammable, oxygen and patented Surecell toxic sensors, our unique cartridge technology ensures safe, accurate and reliable measurements are always made. Available in two configurations, the Impact and Impact Pro accepts either disposable and/or serviceable cartridges respectively, all of which are pre-calibrated and can be replaced in under one minute, so simplifying maintenance and minimizing cost wherever possible. Compact and rugged these monitors are designed for tough working environments while being small, lightweight and unobtrusive, making them ideal for use in confined spaces where entry and exit may be difficult. Designed to work how you want to; gas checks prior to entering a confined space can be carried out using a drop line, hand aspirator or via an optional built-in pump (supplied as standard on the Impact Pro) that turns on and off automatically when the sampling tube is connected. Ultra-bright alarm lights and a powerful audible alarm, coupled with a periodic green flash and bleep provide user confidence that monitoring is always in operation and alarms are never missed. For noisy environments a vibrating alarm is included as standard on the Impact Pro. A large, multilingual, backlit display, with intuitive menu system simplifies use and minimizes operator training. Available for use with a wide range of accessories including the unique Enforcer calibration system and compliance friendly Safelink communication system, you can be sure that the Impact range of portable multigas monitors will be ready to protect you when most needed. IP67 RATED
General Specification General Specification Use Available to detect # User interface Configuration and data download Construction Portable multigas monitor for the protection of personnel from up to four hazardous gases in the working environment. Flammable, Oxygen, Carbon Monoxide, Hydrogen Sulfide, Sulfur Dioxide, Chlorine, Nitrogen Dioxide, Ammonia, Carbon Dioxide. Ultra clear, backlit, alphanumeric display. Intuitive push button menu system with user selectable operation in English, French, German, Italian, Spanish and Dutch. Other languages available upon request. Supplied configured, ready to use including black box data-logging as standard. Configurable via optional PC software and base station for control of logging functions and data download. Impact resistant plastic, anti-static to EN50014. Dimensions 49mm x 84mm x 136mm (1.9 x 3.3 x 5.3 ) Weight Maximum 520g (18oz) including rechargeable battery and optional pump. IP rating Instrument IP67 (NEMA 4 & 6). Operating temperature # Storage temperature # Humidity range # Alarms Audible alarm Visual alarm Battery performance Optional pump -20 C to +55 C (-4 F to +131 F). Instrument -40 C to +80 C (-40 F to +176 F). Continuous 20 to 90%RH. Intermittent 0-99%RH non-condensing. 3 levels of instantaneous alarm per channel. Time weighted average alarms on toxic channels. Supplied pre-set (user configurable via optional PC software and base station). Periodic confidence bleep with differing dual tone for fault, gas alarm and warning rated 85dBA at 1m (90dBA at 1ft). Green confidence flash with rapid red flashing for fault, gas alarm and warning indication. Ni-MH rechargeable, operating life > 10 hours (Charging time 7 hours). Dry cell disposable > 17 hours. Nominal reduction of 10% when used with pump. Supplied as standard with Impact Pro. Typical flow rate 0.3l/min. Automatic start/stop feature with auto-test on start-up and flow fail alarm. Approvals Europe: Ex II 2G, EEx ia d IIC T4 (ATEX). USA: Class 1, Div 1, Groups A, B, C, D (UL). Canada: Class 1, Div 1, Groups A, B, C, D (CSA). Australia (surface): Ex ia s Zone 0, I/IIB, T4. Australia (mines): MDA GD 5053. DMT: DMT 02 ATEX G 001 PFG Nr. 41300502. Brazil: BR-Ex ia d IIC T4 (INMETRO). Marine: Marine Equipment Directive MED 96/98/EC Standard supply Each instrument is supplied complete with quick start guide, multi-lingual operating instructions on CD, dry cell battery holders and batteries, belt clip and flow adaptor. Fully configured and ready to accept either disposable or serviceable sensor cartridges the key considerations in selecting either the Impact or Impact Pro are highlighted below. Impact Impact Pro Cartridge type # Disposable only Disposable or Serviceable Integral pump/pump adaptor No Yes Vibrating alarm No Yes Safelink No Yes Ordering information e.g. 2302B1000 9 U E = 2302B10009UE TYPE 8 Impact 9 Impact Pro CERTIFICATION U USA UL Canada CSA B Europe ATEX Australia SAA Australia Mines MDA Brazil INMETRO LANGUAGE E English* F French G German I Italian S Spanish D Dutch *Default Optional accessories A wide range of optional accessories are available including: Base station and Impact Configuration Utility (required for data download and configuration). Rechargeable NiMH batteries for use with base station or offline charger. Enforcer calibration system. Safelink communication system. Pre-entry sample probes including hand aspirator, 1m probe, tubing and ball float. Body harness and harness clip offering alternate mounting arrangements. Field case for housing of all accessories as required. # Refer to cartridge datasheet for gas specific data * Oxygen detection products must only be used to detect oxygen depletion in air.
As World leaders in gas detection solutions, Honeywell Analytics Neotronics range is best placed to provide the most efficient, practical and cost-effective equipment. Wherever personal protection is required, you can rely on our equipment to provide practical solutions and to help keep your business running safely. The Neotronics range of portable gas detection Impulse XT Impulse XP Impulse X4 Impact and Impact Pro Enforcer Safelink Impulse range The Impulse range provides personal single and multi-gas protection and operational compliance in industrial environments. They are ideal for people working in areas that are not easily accessible and/or where fixed detection systems are not installed or not practical. Impact and Impact Pro are ideal for providing personal protection against gases in tough environments, especially in confined spaces where entry and exit may be difficult. The Impact range provides easy and economical means of personal gas detection to meet compliance requirements. The Safelink Entrant/Attendant function ensures safe working practices are followed. The Enforcer helps you to easily (and cost-effectively) comply with regulations requiring the regular testing of instruments. Because it can calibrate Impact multi-gas monitors within less than two minutes, the instruments are always ready for use. It also reduces cost by avoiding the need for specialist knowledge and equipment, or sub-contracting to expensive third parties, which also adds delays. Safelink adds an extra safety dimension, enabling two-way communication in difficult areas. Easy to use, the system links two Impact Pro multi-gas monitors together, allowing a co-worker in a confined space to be monitored remotely, as well as providing a way of exchanging messages. Find out more www.honeywellanalytics.com Customer business centre Europe and the rest of the world Honeywell Analytics AG Wilstrasse 11-U11 CH-8610 Uster Switzerland Tel: +41 (0)44 943 4300 Fax: +41 (0)44 943 4398 sales@zelana.co.uk Customer business center Americas Honeywell Analytics Distribution, Inc. 400 Sawgrass Corporate Pkwy Suite 100 Sunrise, FL 33325 USA Tel: +1 954 514 2700 Toll free: +1 800 538 0363 Fax: +1 954 514 2784 sales@zelana.com www.honeywell.com Please Note: While every effort has been made to ensure accuracy in this publication, no responsibility can be accepted for errors or omissions. Data may change, as well as legislation, and you are strongly advised to obtain copies of the most recently issued regulations, standards, and guidelines. This publication is not intended to form the basis of a contract. 2005 Honeywell Analytics H_Impact/Impact Pro_DS0280_V1 09/05 2005 Honeywell Analytics 10722
PRODUCT DATA Multi-gas Monitoring Made Easy ImpulseX4 is an unsurpassed portable gas detector for protection against flammable, oxygen, carbon monoxide and hydrogen sulfide gas hazards. It's ideal for use by those companies wanting advanced performance, reliablity and ease of use without high costs of long term maintenance. ImpulseX4 focuses on ease of use by offering only the functionality required to comply with legislation. Everything that a user ROUTINELY HAS TO DO can be achieved with a single button press! Keeping it simple reduces training requirements and enables use in a wider range of industries. Ease of use doesn t mean basic functionality. For example, every instrument has the capability to log data using a simple to fit memory card (the type you get in a digital camera). Events, gas data and the calibration history are all stored and the free software downloaded from our web site enables you to graph or print reports at the press of a button. Convenience and the way users want to work is an important consideration. When clipped to the belt or harness users may want the re-assurance of being able to view the display from different positions. But with many other units the display is upside down forcing the user to remove the unit to look at the display, perhaps creating a hazard. With the ImpulseX4 users can 'flip' the display at the press of a button for that added convenience and safety. With an ultra clear backlit display, vibrating and powerful audiovisual alarms, the ImpulseX4 demands attention when gas hazards are detected in even the most adverse working conditions. All in all, ImpulseX4 offers reliable, easy to use gas detection to keep you safe. Tough Durable Housing Small and lightweight Rugged, impact and weather resistant Includes crocodile clip or optional belt clip Easy to Use Works straight out of the box Single button on/off operation Intuitive icons suitable for all languages User configurable via menu Interactive product training guide available Ultra Clear Backlit Display Unique flip display at the press of a button Continuous reading of gas levels TWA/STEL and two instantaneous alarm levels with peak hold facility Battery life, calibration and self-test status Effective Gas Alarm Indication Alarm and backlight combine to demand attention Distinctive loud two-tone audible alarm Vibrating alarm supplied as standard Reliable Operation Self-test on start up or on demand checks display, battery, sensor, audiovisual and vibrating alarms Uses patented SureCell sensor technology and Reflex cell check technique Includes TempraSURE thermal compensation and shock protection Periodic flash and/or beep for increased confidence (user configurable) Unsurpassed RFI Performance Can be used alongside walkie-talkies or cell phones Exceeds the toughest industrial standards for RFI immunity Cost Effective: Fully inclusive 2 year warranty Minimum 2 year sensor life Initial and on-going running costs minimized Available in 1, 2, 3 or 4 gas versions
General Specification Standard Specification General Reusable multi-gas detector for personal protection against flammable, toxic and oxygen gas hazards. Supplied complete with calibration certificate, quick start guide, alkaline batteries (2), tubing, flow adaptor, crocodile clip, and manual. Alarm Set Points # Gases Detected Range Level 1 Level 2 STEL TWA Flammable (Exp) 0 to 100% LEL* 10% LEL 20% LEL n/a n/a Oxygen (O 2 ) 0 to 30% vol 23% vol 19% vol n/a n/a Carbon Monoxide (CO) 0 to 999 ppm 35 ppm 400 ppm 200 ppm 30 ppm Hydrogen Sulfide (H 2 S) 0 to 250 ppm 10 ppm 40 ppm 10 ppm 5 ppm Sensors Diagnostics Display User Interface Audible Alarm Visual Alarm Vibrating Alarm * Flammable channel can display gas concentration in %vol units for a range of flammable gases # User configurable Operating Temperature Humidity IP Rating Approvals RFI/EMC Sensor Life Battery Life Dimensions Weight Warranty Patented Surecell electrochemical and catalytic bead sensing technology for stable and reliable performance in all industrial environments. Self-test of circuitry, battery, LCD, and sensors on start up or on demand. Patented Reflex cell check techniques included as standard for toxic channels. Ultra clear icon driven backlit LCD displays gas level and detector status. Unique flip display function at the press of a button for added user convenience. High/Low Peak hold facility included with user clear. Time and date. Intuitive three button operation for detector configuration. 90 db @ 30 cm High intensity red LEDs combined with red backlight for maximum effect. Supplied as standard. -20 C to +50 C (-4 F to +122 F). TempraSURE temperature compensation. 5-95% RH (non-condensing). Ingress protection to IP65. North America: Class I, Div 1, Groups A, B, C, D T4. Europe: ATEX II 2G EEx ia d IIC T4. Canada: certified to CSA C 22.2-157 (pending) CE EN50270:1999 and EN55011. Minimum of 2 years backed by inclusive 2 year warranty. 14-16 hours with 2 x AA Alkaline batteries. 12 hours of operation per charge, minimum, with rechargeable NiMH batteries. Low power audiovisual warning. 124 mm(h) X 76 mm(w) X 36 mm(d). 210 g (without batteries), 258 g (with batteries) 2 years 9714 17 16 Optional Accessories Field case Belt clip Hand aspirator kit with inline filter Tubing (2 m/6 ) 1 m (3 ) sample probe 10 m (30 ) sample tubing with ball float 1 15 3 2 4 5 14 6 7 13 8 9 10 11 12 Calibration gas (Balanced Air, CH 4 50% LEL, CO 50 ppm, H 2 S 25 ppm) 0.3 L/min flow regulator Spare memory card for data logging (Refer to the manual for acceptable models and part numbers) Display Details 1 2 3 4 5 6 7 8 9 Test Pass Icon Test Fail Icon High Peak Icon Low Peak Icon (for O 2 only) Alarm Icon Data Logging Icon Battery Icon Pass Code Protection Icon %Vol Unit Icon 10 11 12 13 14 15 16 17 Desktop USB memory card reader Data log graphing and reporting software Interactive training guide CD Data logging kit Confined space kit Calibration kit Bump Test gas cylinder %LEL Unit Icon STEL Icon TWA Icon Alarm Level 1 Icon Alarm Level 2 Icon (for flammable and toxic) Calibration Icon Gas Label Icon O 2 Deficiency Alarm Icon O 2 Excess Alarm Icon Copyright 2004 Zellweger Analytics All rights reserved. Issue 5 04/04 DS0279 IX4-DS Please Note: While every effort has been made to ensure accuracy in this publication, no responsibility can be accepted for errors or omissions. This publication is not intended to form the basis of a contract and the company reserves the right to amend the design and specifications of the instruments without notice. Note too that data may change as well as legislation, and you are advised to obtain copies of the most recently issued regulations, standards and guidelines. A Division of the Zellweger Luwa Group
Neotronics Impulse XT Impulse XT single gas detection delivery advanced, full feature functionality and user configurability
Impulse XT Cost Effective Waterproof to IP67 No calibration required Unit may be calibrated if site procedures necessitate Remaining lifetime display enables planned replacement 24 month continuous operation Low cost investment Easy to Use Out-of-the-box solution One button operation Optional Interactive Training Guide available Excellent EMC/RFI performance No false alarms due to walkie-talkies or cell phones Exceeds with toughest industrial standards for RFI immunity and EMC compatibility Reliable Operation Uses patented SureCell (CO and H 2 S only) and Reflex* technology Stable and accurate gas readings Intrinsically safe Compact Design Small ergonomic design Lightweight Comfortable to wear Durable housing Rugged and impact resistant Weather resistant Versatile clip design Comes with crocodile clip clips anywhere, prevents accidental loss Large Display Uses distinctive icons to illustrate: Battery life status Actual gas reading during alarm Peak reading and when it occurred Remaining lifetime Alarm status Test status Demanding Alarms Distinctive two-tone alarm Rapid flashing alarm alerts user of danger Vibrating alarm signals alarm in progress Low battery alarm indicates unit nearing end of life Impulse XT was inspired by customer needs and technically crafted to be quite simply the easiest and most cost effective to use personal single gas unit on the market. Utilizing patented Surecell TM and Reflex TM technology, the Impulse XT provides 24/7 user confidence. That means solid, reliable and continuous protection... always. Through our Customer Partner Program, Honeywell Analytics identified that the market demanded more than tiny good looks. Our valued partners said that in addition to a small and rugged design, single gas monitors must offer comprehensive sensor options, simple operation and most importantly reliable, accurate readings without false alarms triggered by common radio interference. Simple one button operation reduces time consuming and costly training. Our unique Temperature Compensation and Cell Output Decay Compensation features ensure improved accuracy across wide temperature ranges, providing our 2 year, no calibration needed facility. Impulse XT is your out-of-the-box solution to simple, XTra Sensory Detection.
General Specification Standard Specification General Maximum Operating Life Disposable single gas monitor for the protection of personnel against toxic and Oxygen gas hazards 2 years after activation Shelf Life 12 months before activation (CO and H 2 S), 6 months before activiation (O 2 ) Sensor Range Carbon Monoxide CO 0 to 1000 ppm (display: 0-200 ppm) Hydrogen Sulphide H 2 S Oxygen O 2 0 to 100 ppm (display: 0-100 ppm) 0 to 30%v/v (display: 0-25.0%v/v) Alarm Set Points CO 35 ppm 100 ppm (Note: Other alarm settings H 2 S 10 ppm 15 ppm are available upon request) O 2 23.5% 19.5% Calibration CO/H 2 S Zero adjustment (optional Span) Level Level 1 2 O 2 Span adjustment Operating Temperature Humidity Audible Alarm Visual Alarm Vibrating Alarm Display Sensor Type Battery -4 F to +122 F (-20 C to +50 C) 5-95% RH (non-condensing) 95db at 10cm (4in) High intensity red LEDs Supplied as standard Custom LCD Electrochemical 3.6V non-replaceable Lithium battery IP Rating IP67 (NEMA 4 & 6) Intrinsic Safety RFI/EMC Dimensions Europe: II 2G EEx ia IIC T4 (ATEX). Australia: Ex ia IIC T4 North America: Class 1, Div 1, Groups A, B, C, D T4 (UL/cUL) CE EN50270:1999 and EN55011 3.4 (H) x 2 (W) x 1.1 (D) (87mm x 50mm x 27mm) Weight CO/H 2 S 73g (2.57oz) O 2 82.3g (2.90oz) *Reflex TM not avialable for all sensors * Oxygen detection products must only be used to detect oxygen depletion in air. Display Details Battery Test Fail icon Life time, alarm reading Test pass icon Level 2, CO, H 2 S Level 1, CO, H 2 S, O 2 Level 2, O 2 Life time: Months, days, hours Concentration units Low peak High peak
As World leaders in gas detection solutions, Honeywell Analytics Neotronics range is best placed to provide the most efficient, practical and cost-effective equipment. Wherever personal protection is required, you can rely on our equipment to provide practical solutions and to help keep your business running safely. The Neotronics range of portable gas detection Impulse XT Impulse XP Impulse X4 Impact and Impact Pro Enforcer Safelink Impulse range The Impulse range provides personal single and multi-gas protection and operational compliance in industrial environments. They are ideal for people working in areas that are not easily accessible and/or where fixed detection systems are not installed or not practical. Impact and Impact Pro are ideal for providing personal protection against gases in tough environments, especially in confined spaces where entry and exit may be difficult. The Impact range provides easy and economical means of personal gas detection to meet compliance requirements. The Safelink Entrant/Attendant function ensures safe working practices are followed. The Enforcer helps you to easily (and cost-effectively) comply with regulations requiring the regular testing of instruments. Because it can calibrate Impact multi-gas monitors within less than two minutes, the instruments are always ready for use. It also reduces cost by avoiding the need for specialist knowledge and equipment, or sub-contracting to expensive third parties, which also adds delays. Safelink adds an extra safety dimension, enabling two-way communication in difficult areas. Easy to use, the system links two Impact Pro multi-gas monitors together, allowing a co-worker in a confined space to be monitored remotely, as well as providing a way of exchanging messages. Find out more www.honeywellanalytics.com Customer business centre Europe and the rest of the world Honeywell Analytics AG Wilstrasse 11-U11 CH-8610 Uster Switzerland Tel: +41 (0)44 943 4300 Fax: +41 (0)44 943 4398 sales@zelana.co.uk Customer business center Americas Honeywell Analytics Distribution, Inc. 400 Sawgrass Corporate Pkwy Suite 100 Sunrise, FL 33325 USA Tel: +1 954 514 2700 Toll free: +1 800 538 0363 Fax: +1 954 514 2784 sales@zelana.com www.honeywell.com Please Note: While every effort has been made to ensure accuracy in this publication, no responsibility can be accepted for errors or omissions. Data may change, as well as legislation, and you are strongly advised to obtain copies of the most recently issued regulations, standards, and guidelines. This publication is not intended to form the basis of a contract. 2005 Honeywell Analytics H_Impulse XT_DS0300_V1 09/05 2005 Honeywell Analytics 10718
Neotronics Impulse X4 Portable multi-gas monitoring made easy
Impulse X4 Tough Durable Housing Small and lightweight Rugged, impact and weather resistant Includes crocodile - prevents accidental loss Easy to Use Works straight out of the box Single button on/off operation Intuitive icons suitable for all languages User configurable via menu Interactive product training guide available Ultra Clear Backlit Display Unique flip display at the press of a button Continuous reading of gas levels TWA/STEL and two instantaneous alarm levels with peak hold facility Battery life, calibration and self-test status Effective Gas Alarm Indication Alarm and backlight combine to demand attention Distinctive loud two-tone audible alarm Vibrating alarm supplied as standard Reliable Operation Self-test on start up or on demand checks display, battery, sensor, audiovisual and vibrating alarms Uses patented SureCell TM sensor technology and Reflex TM cell check technique Includes TempraSURE TM thermal compensation and shock protection Periodic flash and/or beep for increased confidence (user configurable) Unsurpassed RFI Performance Can be used alongside walkie-talkies or cell phones Exceeds the toughest industrial standards for RFI immunity Cost Effective: Fully inclusive 2 year warranty Minimum 2 year sensor life Initial and on-going running costs minimized Available in 1, 2, 3 or 4 gas versions Impulse X4 is an unsurpassed portable gas detector for protection against flammable, oxygen, carbon monoxide and hydrogen sulphide gas hazards. It s ideal for use by those companies wanting advanced performance, reliablity and ease of use without high costs of long term maintenance. Impulse X4 focuses on ease of use by offering only the functionality required to comply with legislation. Everything that a user routinely has to do can be achieved with a single button press! Keeping it simple reduces training requirements and enables use in a wider range of industries. Ease of use doesn t mean basic functionality. For example, every instrument has the capability to log data using a simple to fit memory card (the type you get in a digital camera). Events, gas data and the calibration history are all stored and the free software downloaded from our web site enables you to graph or print reports at the press of a button. Convenience and the way users want to work is an important consideration. When clipped to the belt or harness users may want the re-assurance of being able to view the display from different positions. But with many other units the display is upside down forcing the user to remove the unit to look at the display, perhaps creating a hazard. With the Impulse X4 users can flip the display at the press of a button for that added convenience and safety. With an ultra clear backlit display, vibrating and powerful audiovisual alarms, the ImpulseX4 demands attention when gas hazards are detected in even the most adverse working conditions. All in all, Impulse X4 offers reliable, easy to use gas detection to keep you safe.
General Specification Standard Specification General R eusable multi-gas detector for personal protection against flammable, toxic and oxygen gas hazards. Supplied complet e with calibration certificate, quick start guide, alkaline batteries (2), tubing, flow adaptor, crocodile clip, and manual. Alarm Set Points # Gases Detected Range Level 1 Level 2 STEL TWA Flammable (Exp) 0 to 100% LEL* 10% LEL 20% LEL n/a n/a Oxygen (O 2 ) 0 to 30% vol 23% vol 19% vol n/a n/a Carbon Monoxide (CO) 0 to 999 ppm 35 ppm 400 ppm 200 ppm 30 ppm Hydrogen Sulfide (H 2 S) 0 to 250 ppm 10 ppm 40 ppm 10 ppm 5 ppm * Flammable channel can display gas concentration in %vol units for a range of flammable gases. # User configurable. Sensors Diagnostics TM Patented Surecel l electrochemical and catalytic bead sensing technology for stable and reliable performance in all industrial environments. Self-test of circuitry, battery, LCD, and sensors on start up or on demand. TM Patented Reflexcell check techniques included as standard for toxic channels. Display User Interface Audible Alarm Visual Alarm Vibrating Alarm Operating Temperature Humidity IP Rating U ltra clear icon driven backlit LCD displays gas level and detector status. Unique flipdisplay function at the pres s of a button for added user convenience. High/Low Peak hold facility included with user clear. Time and date. Intuitive three button operation for detector configuration. 90 db @ 30 cm High intensity red LEDs combined with red backlight for maximum effect. Supplied as standard. -20 C to +50 C (-4 F to +122 F). TempraSURE TM temperature compensation. 5-95% RH (non-condensing). Ingress protection to IP65. Approvals N orth America: Class I, Div 1, Groups A, B, C, DT4. Australia: SAA Ex ia s Zone 0 I/IIC T4 Europe: ATEX II 2G EEx ia d IIC T4. (T2 for rechargeables) Canada: certified to CSA C22.2-152 and C 22.2-157. RFI/EMC Sensor Life CE EN50270:1999 and EN55011. Minimum of 2 years backed by inclusive 2 year warranty. Battery Life 14-16 hours with 2 xaaalkaline batteries. 12 hours of operation per charge, minimum, with rechargeable NiMHbatteries. Low power audiovisual warning. Dimensions Weight Warranty Optional Accessories 124 mm(h) X 76 mm(w) X 36 mm(d). 210 g (without batteries), 258 g (with batteries) 2 years Field case Belt clip Hand aspirator kit with inline filter Tubing (2 m/6 ) 1 m (3 ) sample probe 10 m (30 ) sample tubing with ball float Calibration gas (Balanced Air, CH4 50% LEL,CO 50 ppm, H2S 25 ppm) 0.3 L/min flow regulator Spare memory card for data logging (Refer to the manual for acceptable models and part numbers) Desktop USB memory card reader Data log graphing and reporting software Interactive training guide CD Data logging kit Confined space kit Calibration kit Bump Test gas cylinder NiMH Battery and AC charging kit Vehicle Charging Kit * Oxygen detection products must only be used to detect oxygen depletion in air. 17 16 Display Details 1 3 5 6 7 8 2 4 15 14 13 9 10 11 12 1 Test Pass Icon 2 Test Fail Icon 3 High Peak Icon 4 Low Peak Icon (for 2 only) O 5 Alarm Icon 6 Data Logging Icon 7 Battery Icon 8 Pass Code Protection Icon 9 %Vol Unit Icon 10 %LEL Unit Icon 11 STEL Icon 12 TWA Icon 13 Alarm Level 1 Icon Alarm Level 2 Icon (for flammable and toxic) 14 Calibration Icon 15 Gas Label Icon 16 O 2 Deficiency Alarm Icon 17 O 2 Excess Alarm Icon
As World leaders in gas detection solutions, Honeywell Analytics Neotronics range is best placed to provide the most efficient, practical and cost-effective equipment. Wherever personal protection is required, you can rely on our equipment to provide practical solutions and to help keep your business running safely. The Neotronics range of portable gas detection Impulse XT Impulse XP Impulse X4 Impact and Impact Pro Enforcer Safelink Impulse range The Impulse range provides personal single and multi-gas protection and operational compliance in industrial environments. They are ideal for people working in areas that are not easily accessible and/or where fixed detection systems are not installed or not practical. Impact and Impact Pro are ideal for providing personal protection against gases in tough environments, especially in confined spaces where entry and exit may be difficult. The Impact range provides easy and economical means of personal gas detection to meet compliance requirements. The Safelink Entrant/Attendant function ensures safe working practices are followed. The Enforcer helps you to easily (and cost-effectively) comply with regulations requiring the regular testing of instruments. Because it can calibrate Impact multi-gas monitors within less than two minutes, the instruments are always ready for use. It also reduces cost by avoiding the need for specialist knowledge and equipment, or sub-contracting to expensive third parties, which also adds delays. Safelink adds an extra safety dimension, enabling two-way communication in difficult areas. Easy to use, the system links two Impact Pro multi-gas monitors together, allowing a co-worker in a confined space to be monitored remotely, as well as providing a way of exchanging messages. Find out more www.honeywellanalytics.com Customer business centre Europe and the rest of the world Honeywell Analytics AG Wilstrasse 11-U11 CH-8610 Uster Switzerland Tel: +41 (0)44 943 4300 Fax: +41 (0)44 943 4398 sales@zelana.co.uk Customer business center Americas Honeywell Analytics Distribution, Inc. 400 Sawgrass Corporate Pkwy Suite 100 Sunrise, FL 33325 USA Tel: +1 954 514 2700 Toll free: +1 800 538 0363 Fax: +1 954 514 2784 sales@zelana.com www.honeywell.com Please Note: While every effort has been made to ensure accuracy in this publication, no responsibility can be accepted for errors or omissions. Data may change, as well as legislation, and you are strongly advised to obtain copies of the most recently issued regulations, standards, and guidelines. This publication is not intended to form the basis of a contract. 2005 Honeywell Analytics H_Impulse X4_DS0279_V1 09/05 2005 Honeywell Analytics 10716