9A DUETTE SHADES OVERVIEW
PRODUCT INFORMATION MANUAL SECTION: 9A DUETTE SHADES Duette Shades ew Duette design raises the bar for style. Design new Duette design is a style evolution. Duette honeycomb shades continue to evolve, enhancing a wide variety of lifes The Duette headrail embodies the honeycomb shape for a clean style in any interior. The textured matte finish presents a soft, refined apiving spaces both modern and pearance that coordinates withtraditional. the look and colour of the shade fabric. Flush-mount end caps cleanly finish the edge of the shade, while reduced stack height increases the view out the window. GETTING STARTED Product View embodies the honeycomb shape new Duette headrail a clean style in any interior. The textured matte finish Installation Brackets sents a soft, refined appearance that coordinates with look and color of the shade fabric. Flush-mount end s cleanly finish the edge of the shade, while reduced k height increases the view out the window. LiteRise Standard HLIGHTS OF THE NEW DUETTE DESIGN: ew PowerView Motorization integrated end p design. ew LiteRise Handle contoured for comfort and a phisticated, high-end appearance. Handle ew UltraGlide Wand the wand is soft-touch coated create a softened look while the teardrop-shaped ndle provides the perfect ergonomic operation. ew Duolite Design hidden moving rail creates a amless integrated look. ew Top-Down/Bottom-Up Design Top-Down/Bottom-Up Duolite 1 tive 7/16 REPLACES ISSUE DATE: MAY 2013 APPROVED BY: D.ALTIPARMAKOVA PAGE 2
Duette Shades Lifting Systems Signature Headrail Ultraglide The ultimate in convenient operation, the Ultraglide Operating System features a click and walk away system using a retractable wand mechanism to raise and lower shades. Available with Bottom Up, Top-Down, Top-Down/ Bottom-Up and, Duo-Lite design options. Literise Completely cordless operating system along with added child and pet safety benefits. The stylish and sophisticated handle is slightly contours and is comfortable in the hand, while the handle attachment creates an integrated high-end appearance. Available with Bottom Up, Top-Down/ Bottom-Up and Duo-Lite design options. PowerView Completely cordless battery operated system provides one-touch operation, perfect for hard to reach windows and no lifting cords. The sleek, control side end cap features a discreet button and visible indicator lights, flows cleanly into the headrail profile. Available with Bottom Up, Top-Down, Top-Down/ Bottom-Up and Duo-Lite design options. Bottom-Up Features traditional operation where the bottom rail is raised to open the shades and lowered to close the shade. Top-Down: Fixed at the bottom of the window, the shades are lowered to let light in and raised to the desired height for privacy. Top-Down/ Bottom-Up: Provides complete versatility allowing the shades to be open from the top, from the bottom, or even somewhere in between for the perfect balance of light and privacy. Duo-Lite: Teams two separate fabric panels in one clever and seamless design, offering the ultimate day and night light and privacy control. Note: Import leadtimes apply with all Duo-Lite Shades. Duo-Lite is not available with the Living Series Fabric range. All shades feature the top panel with the Sheer fabric and bottom panel with the bloockout or translucent fabric. This is the standard configuration. REPLACES ISSUE DATE: MAY 2013 APPROVED BY: D.ALTIPARMAKOVA PAGE 3
Duette Shades Operation - Signature Headrail Ultraglide LiteRise PowerView For smooth operation, keep the wand close to the fabric when raising and lowering the shade. Operate the Shade For smooth operation, keep the wand close to the fabric when raising and lowering the shade. To Lower the Shade Pull the wand toward the center of the shade at about a 45 angle. The locking mechanism at the top of the wand releases with a click. The shade lowers as you allow the wand to return to the vertical position. IMPORTANT: The wand must be pulled in close to the front of the shade. Do not pull the wand out away from the shade. To stop the shade while lowering, move the wand back toward the vertical position and give a slight downward pull to engage the locking mechanism. If the shade hits an obstruction as it is lowered it will stop, which may cause the cords in each cord rout to become misaligned. This may cause the shade to be angled or tilted when fully raised. If this occurs, do the following: Raise the shade slightly. Lower the shade completely to the sill. In some cases, pull gently on the bottom rail to get it to drop completely. IMPORTANT: If the shade is tilted when fully raised, do not pull harder on the wand. It does not correct the tilt and may make it worse. To Raise the Shade Pull the wand straight down or slightly toward the outside. With each stroke the shade partially raises. Allow the wand to retract after each downward stroke. Use multiple strokes until the shade reaches the desired position. Duolite and Top-Down/Bottom-Up Shades To rate Duolite and Top- Down/Bottom Up shades, the right wand operates the middle rail and the left wand operates the bottom rail (unless reverse controls were specified on the order). To Lower: Pull the wand toward the center of the shade and release. To Raise: Pull the wand straight down with short strokes. This wand operates the bottom rail. Middle Bottom This wand operates the middle rail. IMPORTANT: You must first lower the bottom rail before lowering the middle rail. Likewise, you must first raise the middle rail before raising the bottom rail. Operate the Shade For better support and smoother operation, use the handle when raising and lowering the shade. To Raise the Shade Slowly and steadily push up on the bottom rail handle. Allow the shade to stack evenly. To Lower the Shade Slowly and steadily pull down on the bottom rail handle. To Raise or Lower the Middle or Bottom on Top-Down/Bottom-Up and Duolite Shades Shades with the Top-Down/Bottom-Up and Duolite design options have two moving rails. With the bottom rail fully lowered, slowly and steadily push up or pull down on the middle rail handle. NOTE: The bottom rail must be in the fully lowered position to operate the middle rail. With the middle rail fully raised, slowly and steadily push up or pull down on the bottom rail handle. NOTE: The middle rail must be in the fully raised position to operate the bottom rail. Basic Operation 1. To wake up the remote, simply pick it up or press STOP. The last group(s) selected will be highlighted and active. 2. Press all or groups 1 6 to select specific shade(s) to move. Selected group button(s) will light to show they are selected. a. Multiple group buttons may be selected at a time. b. To deselect a group, press the group button again. The backlight for that group button will go out. 3. Press CLOSE to lower the selected shade(s). 4. Press OPEN to raise the selected shade(s). 5. Press STOP to stop the shade s movement anywhere along its travel. 6. While a shade is in motion, press the opposite of shade motion ( OPEN or CLOSE) to reverse direction. 7. Press FAVORITE to send selected shade(s) to your preset favorite position. Refer to the PowerView Motorization Remote Control Guide on how to set a favorite position. Top-Down/Bottom-Up and Duolite Operation 1. Press CLOSE to lower the bottom rail, closing the shade. 2. Press the left arrow to lower the middle rail. This opens the shade top-down on a Top-Down/Bottom- Up shade or covers the window with the top fabric panel on a Duolite shade. (If the bottom rail is not fully lowered, pressing this button will lower the bottom rail first then lower the middle rail.) 3. Press the right arrow to raise the middle rail. This closes the shade bottom-up on a Top-Down/Bottom-Up shade or covers the window with the bottom fabric panel on a Duolite shade. 4. Press OPEN to raise the bottom rail, opening the shade bottom-up. (If the middle rail is not fully raised, pressing this button will raise the middle rail first then raise the bottom rail.) 5. Press STOP to stop shade movement anywhere along the shade s travel. OPEN Group 1 LEFT ARROW Lowers the middle rail on Top-Down/Bottom-Up and Duolite shades Group 2 CLOSE Group 3 Group 4 Group 5 Group 6 RIGHT ARROW Raises the middle rail on Top-Down/Bottom-Up and Duolite shades Favorite (Shade position) STOP (Press and hold for programming mode) REPLACES ISSUE DATE: MAY 2013 APPROVED BY: D.ALTIPARMAKOVA PAGE 4
Duette Shades - Signature Headrail Lifting Systems ULTRAGLIDE POWERVIEW LITERISE MOUNTING REQUIREMENTS ARE THE SAME FOR BOTH THE 10MM AND 20MM CELL SIZES SIGNATURE HEADRAIL 10MM & 20MM CELL SIZE Reveal Mount Minimum mounting depth Minimum mounting depth, flush mount Face Mount Minimum Mounting Surface Height Recommended width Overlap End Mount Minimum mounting depth Minimum mounting depth, flush mount 13mm 57mm 32mm 50mm 57mm 60mm SIGNATURE HEADRAIL DIMENSIONS - 10MM & 20MM 38MM FULLY RECESSED MOUNTING DEPTH 57MM 52MM Architrave & Reveal Face & Reveal Corners Bays REPLACES ISSUE DATE: MAY 2013 APPROVED BY: D.ALTIPARMAKOVA PAGE 5
Duette Shades - Ultraglide Wand Measuring Guidelines Control wands for UltraGlide shades work best when ordered at a length approximately equal to the distance from the headrail to the shoulder of the user. The UltraGlide wand tassel should fall between the shoulder heights of the consumers in the home, as shown in the Illustration below. Wand Length Wand Length (in 6" increments) Wand Length Length (in 6" increments) Duette Mounting Height Range (mm)* Up to 1800 Wand Lengths** 305mm 1801 up to 1950 457mm 1951 up to 2100 610mm 2101 up to 2250 762mm 2251 up to 2400 915mm 2801 to 3660 2134mm The above table is only a guideline and is based on the average consumer shoulder height. Please specify your preferred wand length on the order form. *This is the height from the floor to the top (Headrail) of the shade. **The above wand lenghts are the standard lenghts available. Non-standard lenghts are not available. REPLACES ISSUE DATE: MAY 2013 APPROVED BY: D.ALTIPARMAKOVA PAGE 6
PRODUCT INFORMATION MANUAL SECTION: 9A DUETTE SHADES Duette Shades with PowerView Motorisation POWER SUPPLY OPTIONS CONTROL OPTIONS OR BATTERY WAND DC POWER ADAPTOR SURCHARGE $459 WHITE SURCHARGE $459 BLACK WHITE BLACK SCENE CONTROLER REMOTE CONTROL $146 (IN CONJUNCTION WITH POWERVIEW HUB) $224 HAND HELD OPTIONS PowerView PEWTER FROST CLEAR FROST MATTE BLACK WHITE POPPY COBALT POWERVIEW PEBBLE (CAN HOUSE EITHER REMOTE OR OR SCENE CONTROLER) $32 NOTE: DealersCITRON and installers may O Surface by calling Hun THE POWERVIEW HUB WALL MOUNT OPTIONS PowerView Remote PCN 7520000XXX NICKEL BLACK PowerView Remot PCN 5110540079 HUB KIT WHITE SURFACE WALL MOUNT HUB KIT - (INCLUDES ONE REPEATER) $727 (CAN HOUSE EITHER CONTROL OR SCENE CONTROLLER ) $32 (BLACK & WHITE) $62 (NICKEL) A) POWERVIEW HUB B) USB POWER SUPPLY (BLACK) C) USB POWER SUPPLY CABLE D) ETHENET CABLE E) REPEATER KIT: 1 POWERVIEW REPEATER 1PowerView USB POWERPebble SUPPLY (WHITE) PCN 7602209XXX PowerView Surfac PCN 7612208xxx ACCESSORIES ADDITIONAL REPEATERS ADDITIONAL REPEATERS + AUS POWER ADAPTOR DAISY CHAIN CONNECTOR $99 $5 2989875000 $24 REPLACES ISSUE DATE: MAY 2013 CONNECTION INTERFACE 4254220005 $250 EXTENSION CABLES 380MM 1.2M 3M 6M 2989899000 2989900000 2989901000 2989902000 APPROVED BY: D.ALTIPARMAKOVA HUB SERIAL CABLE $24 $25 $37 $52 (FOR RS232 AUTOMATION Gateway HOME Hub Serial Cable CONNECTION) (PowerView Hub required.) $26 PCN 7590001000 18 Volt Daisy Cha PCN 2989875000 PAGE 7 2015 Hunter Douglas. All righ
select PRODUCT INFORMATION MANUAL Duette Shades PowerView Motorisation MOUNTING REQUIREMENTS HIGH MOUNT BRACKET LOW MOUNT BRACKET DC POWER SUPPLY CELL SIZE: 10mm & 20mm 10mm & 20mm 10mm & 20mm Minimum Reveal Mounting Depth (A): 25mm 25mm 13mm Minimum End (EB) Mounting Depth: 45mm 45mm 32mm Minimum Flush Mounting Depth (B): 70mm 67mm 60mm Minimum Face Mount Vertical Surface: 32mm 32mm 32mm Installation Brackets with Spacer Blocks Manual Control Button LED PowerView Standard PowerView Remote (with Pebble ) PowerView Scene Controller (with Surface) PowerView App Battery Pack Mounting Bracket Option. (Rear View) Socket High Mount Bracket - Standard Low Mount Bracket - Optional REPLACES ISSUE DATE: MAY 2013 APPROVED BY: D.ALTIPARMAKOVA PAGE 8
Duette Shades Fabric Stacking Guide Add fabric and rail stacking heights together for complete shade stacking height. stacking heights are shown below. Shade stacking height applicable only when shade is in the fully raised position. Stacking heights do not apply to Top-Down shades. Shade Drop (mm) 1220 1810 2130 3660 Fabric Range Architella Elan Translucent 22 35 44 64 Architella Elan Blockout 22 29 38 64 Architella Reception Translucent 32 48 54 83 Architella Reception Blockout 25 38 46 N/A Architella Panache Translucent 22 35 44 89 Architella Panache Blockout 22 29 38 89 Architella Aurora 32 44 51 83 10mm Classic 19 29 35 54 20mm Symphony 16 25 32 44 20mm Midnight 19 29 32 51 10mm Nightfall 25 35 41 70 10mm Embrace Translucent 19 27 32 51 20mm Embrace Blockout 13 19 22 37 10mm Embrace Blockout 25 35 41 70 20mm Embrace Translucent 13 22 25 43 20mm Harper Translucent 16 25 29 51 20mm Harper Blockout 5 29 35 52 20mm Jaggar Translucent 13 16 19 32 20mm Jaggar Blockout 13 16 19 35 20mm Sheer 13 14 16 25 Stacking Heights Signature Lifting Systems Signature Lifting Systems TDBU & DL Add rail height to fabric stack height 48mm 60mm REPLACES ISSUE DATE: MAY 2013 APPROVED BY: D.ALTIPARMAKOVA PAGE 9
Duette Vertiglide Shades Vertiglide Shades Cordless side-to-side operation, ideal for sliding doors. Four fabric stacking options available: left stack, right stack, split stack (centre opening) and travelling centre stack. Duolite option available; centre opening design with a different fabric on each side, each of which can span the full width of the opening. Manual and/or PowerView Options available. Powerview offers two fabric stacking options: left and right stack. Dual Operation on Vertiglide PowerView (Motorised and Manual) is standard with the shade. Vertiglide PowerView Ordering Checklist With reveal mounts, please allow 80mm to 155mm overlap on each side to minimize light gap and account for minimum vertical mounting surface and desired floor clearance when specifying drop. Specify stacking configuration: left or right - With left stack, the motor and manual control button is on the left - With right stack, the motor and manual control button is on the right. Specify number and colours of PowerView Pebble Remotes and/or PowerView Surface Remotes. Specify power option-battery or DC. Headrail Vertiglide Stacking Height Fabric Stack Left or Right Stack 165mm Fabric Stack Split Stack Per Side 165mm Travelling Centre Stack 330mm Manual Control Button Gearbox Motor Installation Brackets Fabric Carriers Cord Tensioners* Battery Wands Moving Bracket* Tension Cord Stationary Bracket Stationary Handle Moving Inside Mount Adaptor Stationary Bottom Bracket *Located inside headrail Optional Outside Mount Hardware: Extension Bracket 3mm Shim 13mmSpacer Block Extension Cable DC Power Supply (Optional) NOTE: ALL PRICES ARE LISTED EXCLUSIVE OF GST. 10% GST MUST BE ADDED TO ALL PRICES. REPLACES ISSUE DATE: MAY 2013 APPROVED BY: D.ALTIPARMAKOVA PAGE 10
Duette Shades Top and Valance Dimensions 92mm with valance and mounting bracket Vertiglide Measuring Guidelines Architrave & Reveal Face & Reveal 80mm Stacking Options Left Stack Right Stack Corners Fabric Stack= 165mm Spilt Stack (Centre Opening) Traveling Centre Stack Fabric Stack= 165mm each end (approx) *Manual Configuration Only Duolite Bays Fabric Stack= 330mm Due to the location of the valance relative to the fabric, there will be unnoticable light in a corner installation. This gap is where the butting blind meets the valance on the through blind. REPLACES ISSUE DATE: MAY 2013 APPROVED BY: D.ALTIPARMAKOVA PAGE 11
Duette Shades - Skylight (Manual) Orientation Vertical 90 º Orientations STACK TOP STACK SIDE STACK BOTTOM SLOPED ORIENTATION SKYLIGHT (0º) ORIENTATION Specifications Hardware Dimensions 10MM PLEAT SIZE 27mm 13mm 20MM PLEAT SIZE 27mm 13mm 43mm 29mm 64mm 48mm 19mm RAILS 19mm RAILS Face & Reveal Width +100mm Width -0mm Drop -0mm +100mm Face Fit (No architrave) = opening width + 100mm & opening +100mm Face Fit (with architrave) = measure outside of architrave to outside of architrave. Reveal Fit = opening width & opening drop. Note: Face fit application is not ideal as the appearance of the shade may appear unfinished. Note: Support cords are required for Sloped or Overhead skylights >900mm width. stiffener required for all skylights >1160mm width. Skylight (manual) Powdercoating Surcharges Powdercoating is only available for manual Skylight Shades. The below prices should be added to each shade. Choose from the Dulux colour range. Number of blinds Colour 1 2 3 Standard $366 $366 $366 Up to 3 Blinds = $366 For additional blinds $62 per blind Non Standard $869 $869 $995 Up to 3 Blinds = $975 For additional blinds $62 per blind Note: More than 10 Blinds will be priced on application. Please contact AWF Customer Service. REPLACES ISSUE DATE: MAY 2013 APPROVED BY: D.ALTIPARMAKOVA PAGE 12
Duette Shades - Skylift PowerView Orientation NOTE: AVAILABLE IN TOP STACK ONLY. This shade cannot be installed as a side stack shade, operating from sideto-side within the window. Also, it cannot be installed as a top-down shade, where the fabric stack is at the bottom of the window. Dimensions 20mm Pleat Size 57mm 10mm Pleat Size 57mm 57mm 38mm 48mm 56mm Top 55mm Top 56mm Bottom 60mm Side 32mm Moving Face Width & Reveal +100mm Width -0mm Drop -0mm +100mm Face Fit (No architrave) = opening width + 100mm & opening +100mm Face Fit (with architrave) = measure outside of architrave to outside of architrave. Reveal Fit = opening width & opening drop. Note: Face fit application is not ideal as the appearance of the shade may appear unfinished. Mounting Requirements Reveal Fit Minimum mounting depth Less than 787mm wide = 115mm Greater than 787mm wide = 64mm Face Fit Minimum flat vertical surface = 64mm Skylift PowerView Motorisation Power Supply Options Inside Mount Installation Bracket Outside Mount Installation Bracket Corner Cover Side (Left) L Tension Screw and Top Tension Plate Tension Cable Motor Assembly Bottom Tension Plate and Screw Moving Manual Control Button Top Moving EndCap Side (Right) Battery Wand Shades less than 787mm in width, require a pre-attached satellite battery pack (mounts behind the bottom rail or outside opening). No additional surcharge will apply for the satellite battery pack. Shades Greater than 787mm wide, will have the battery packs concealed in the bottom rail. For shades less than 787mm wide, specify extension cable length: 380mm, 1.2M, 3M or 6M. DC Power Pack If ordering the 18V DC power supply, specify extension cable length: 1.2M, 3M or 6M. Take into account that the motor is located in the centre of the rail; therefore add half the width of the shade to the length of cable required for the 18V DC power supply. Battery Wands Holder Fits Inside Bottom Bottom Battery Wands (For 787mm and Wider Shades) Battery Wands Battery Power Cable Spacer Blocks Battery Wand Cover Battery Power Cable Mounts Behind Bottom or Outside Window Opening 18V DC Power Supply (Optional) Satellite Battery Pack Battery Wand (For Shades Narrower than 787mm) - Each PowerView SkyLift shade comes with a battery pack or DC power supply. - SkyLift battery life is approximately one to two years, depending on usage. - Energizer* Ultimate Lithium AA batteries should be used when replacing the batteries in the PowerView battery pack. Lithium batteries are the optimum and recommended choice for SkyLift shades. * Energizer is a trademark of Energizer Battery Company, Inc. Note: For SKYLIFT POWERVIEW shades less than 584mm wide, the manual control button will be placed on the left side of the bottom rail. For SKYLIFT POWERVIEW shades equal to or over 584mm wide, a centre-mounted manual control button will be standard. Standard Tension Cable Chart Cables will be visible when SKYLIFT is in the open position, refer to exploded view diagram Number of cables: 2 3 4 Width Range: 432mm 889mm 890mm 1676mm 1677mm 2210mm REPLACES ISSUE DATE: MAY 2013 APPROVED BY: D.ALTIPARMAKOVA PAGE 13
Duette Shades Measuring Guidelines for Shapes Note: Shapes hardware will use the Standard Cord Lock system and will not coordinate with Signature Headrail. Templates Make the Difference Templates are required with all speciality shaped orders. Easy-touse guidelines for preparing templates appear on this page. NOTE: One template required for each window. Angular and Triangular Windows Either the top or bottom of the shade is sloped or angled. 1. Measure all four sides to ensure accurate fabrication. 2. Measure the inside of the window opening for reveal fit. 3. For face fit, add the desired amount of overlap. 4. Record all measurements on the template to create for the shade. 5. Use the tallest height measurement when pricing the shade. Key (Fig. 1) Vertical measurements: LH for the left height; RH for the right height Horizontal measurements: W for the width; S for slope Slope angle: angle between slope and horizontal line FIG 1 Slope Angle S Five Steps to an Accurate Template 1. Tape cardboard (thin sheet or corrugated) or heavy wrapping paper over the window opening, allowing plenty of overlap. Use paper that has never been folded; a template can have no folds or creases. 2. Draw an exact outline of the window opening by carefully tracing over the inside edge of the window frame. 3. Remove the paper from the window opening. If the shade is an outside mount, add the desired amount of overlap to the window outline and draw a second outline around it to match the shape of the finished shade. 4. Mark the shade dimensions on the template. Check that the template dimensions match your measurements of the actual window opening. It is easiest to verify by cutting out the template and repositioning in the window opening. 5. Identify the template and its orientation. Write the customer s name on the template, and mark the ROOM SIDE and TOP. Send the template to the factory: If possible, roll the template and use a packaging tube to protect it against any damage. Use an authorisation for return (AFR) document for despatch, the AFR number has to be written on the order, so in that way the number is entered into the computer system. Send the template to the following address: Hunter Douglas Limited 338 Victoria Road, Rydalmere 2116 Att: Receiving Department 762 mm TOP 695mm WINDOW OPENING 800mm $ 1321mm TOP LH TEMPLATE REQUIRED RH ROOM SIDE 229mm 467mm Customer: Robert Jenkins 1143mm ROOM SIDE 1524mm Customer: Susan Jones 1245mm FIG 2 HEIGHT W TEMPLATE REQUIRED WIDTH TEMPLATE REQUIRED IMPERFECT ARCH HEIGHT IMPORTANT: Template must be cut out in the exact shape of the window opening and tested in window for correct fit. WIDTH PERFECT ARCH TEMPLATE REQUIRED HEIGHT WIDTH With quarter circles, height will equal width. In perfect arches, height will equal one-half the width. With imperfect arches, or eyebrows, exact height/width relationships do not occur... so extra care must be taken to ensure a good fit (Fig. 2). REPLACES ISSUE DATE: MAY 2013 APPROVED BY: D.ALTIPARMAKOVA PAGE 14
Duette Shades Brackets & Accessories 51mm 43mm 13mm 30mm 67mm 45mm 30mm 30mm 30mm 3mm 30mm 27mm Signature installation bracket 10mm + 20mm KIT2759-3 pack KIT2758-2 pack 45mm Signature Spacer Block 2780139785 Vertiglide Installation Bracket 2990934000 32mm 101mm A B 35mm 96mm 25mm Vertiglide Bottom Bracket A - 2980105000 B - 2980297000 Extension Bracket 27.285.178 EasyAdjust Levelling System Key 2801404000 13mm 13mm 25mm 37mm 30mm 32mm Hold Down Bracket 10mm 27.290.000 Hold Down Bracket 20mm 27.291.000 Cut Out Specifications LEFT SIDE CUT-OUT Ordering Notes Only available with Ultraglide and PowerView Bottom Up Shades. Also available with Std Cord Lock and EasyRise shades with the Living Series Fabric ranges only. Bottom rail will also be cut out. Specify cut-out dimensions. Specify whether cut-out should be made on the right or left side of the shade. Only bottom side cut-outs are available. Top of cut-out must be greater than 300mm from the headrail. Cut-Outs Pricing Procedure 1. Find base price of shade on Standard Rectangular Price Charts, using overall dimensions. 2. Add the appropriate surcharge for the cut-out(s). Width: 75mm Maximum Top of cutout must be greater than 300mm from the headrail. RIGHT SIDE CUT-OUT Top of cutout must be greater than 300mm from the headrail. Width: 75mm Maximum REPLACES ISSUE DATE: MAY 2013 APPROVED BY: D.ALTIPARMAKOVA PAGE 15
Duette Signature Headrail Measuring - Ultralide, LiteRise & PowerView Dimensions 30mm Hardware 76mm Measuring Guidelines 30mm & 38mm Hardware Architrave & Reveal Face & Reveal 37mm * 30mm Corners 13mm 68mm FRONT EDGE +85 38mm Hardware 90mm 30mm Headrail -85mm 38mm Headrail -99mm 30mm Headrail -85mm 38mm Headrail -99mm 37mm Bays 30mm Headrail -66mm 38mm Headrail -76mm 13mm 30mm 68mm 30mm Headrail -33mm 38mm Headrail -38mm 30mm Headrail -33mm 38mm Headrail -38mm 30mm Headrail -66mm 38mm Headrail -76mm Note: If fitting hold down brackets cut back bottom rail -5 from the width. 30mm Headrail -33mm 38mm Headrail -38mm 30mm Headrail -33mm 38mm Headrail -38mm If using Top Down Bottom Up a greater deduction will have to be made as the cord locks will clash in the corners resulting in a larger gap. REPLACES ISSUE DATE: MAY 2013 APPROVED BY: D.ALTIPARMAKOVA PAGE 16
Duette Signature Headrail Measuring - Ultralide, LiteRise & PowerView Fabric Stacking Guide Shade Drop Fabric Ranges 1220mm 1830mm 2135mm 3660mm 20mm Elan 22mm 35mm 45mm 65mm 20mm Elan Opaque 22mm 30mm 38mm 65mm 20mm Alexa 35mm 54mm 64mm 108mm 20mm Leela 43mm 64mm 71mm 124mm 38mm Menage 32mm 50mm 55mm 95mm 38mm Menage Opaque 32mm 50mm 55mm 95mm 30mm Sheer Opalessence 25mm 35mm 45mm N/A 30mm Sheer Opalessence Opaque 19mm 32mm 50mm 57mm 30mm Myst 13mm 19mm 25mm 35mm 30mm Myst Opaque 13mm 19mm 25mm 35mm 30mm Sheer 13mm 16mm 19mm 29mm Stacking Heights Signature Lifting Systems Signature Lifting Systems TDBU & DL Add rail height to fabric stack height 48mm 60mm Notes: Add fabric and rail stack heights together for complete stacking height. Shade stacking height only applies when shade is in fully raised position. Stacking heights do not apply to TD shades. Hardware Mounting Requirements Mounting Requirements - Ultraglide & Literise Reveal Mount 30mm H/Ware Ménage 38mm H/Ware Minimum mounting depth 13mm 13mm Minimum mounting depth, flush mount 76mm 94mm Face Mount Minimum Mounting Surface Height 32mm 32mm End Mount Minimum mounting depth 50mm 50mm 30mm & 38mm Hardware Mounting Requirements Powerview 30mm Hardware 38mm Hardware High Mount Bracket Low Mount Bracket DC Power Supply High Mount Bracket Low Mount Bracket DC Power Supply Minimum Reveal Mounting Depth (A): 25mm 25mm 13mm 25mm 25mm 13mm Minimum End (EB) Mounting Depth: 45mm 45mm 32mm 50mm 50mm 50mm Minimum Flush Mounting Depth (B): 90mm 85mm 75mm 105mm 98mm 94mm Minimum Face Mount Vertical Surface: 32mm 32mm 32mm 32mm 32mm 32mm REPLACES ISSUE DATE: MAY 2013 APPROVED BY: D.ALTIPARMAKOVA PAGE 17