Aerosols
Nu-Brite Same popular Nu-Brite Powerful high foaming action lifts out dirt and grime while brightening coils Excellent & powerful cleaner that is especially adapted for kitchen degreasing Outdoor use only, or indoor with proper ventilation Has to be rinsed
Evap Foam No Rinse Evaporator Coil Cleaner Self rinsing, fast breaking foam Cleans and deodorizes Pleasant lemon scent Improves Indoor Air Quality (IAQ) Sprays from any angle, right side up or upside down NSF Registered, #143366
Evap-Fresh No Rinse Evaporator Coil Cleaner EPA registered for the HVAC application Cleans, Disinfects, & Deodorizes in one step Kills bacteria, mold, H1N1, and much more Self-rinsing, fast breaking foam Fresh lemon scent Improves Indoor Air Quality (IAQ) Sprays from any angle, right side up or upside down
Calclean Condenser & Evaporator Cleaner Cleans surface soils and greasy dirt Contains no fluorocarbons Ideal for window & PTACs units Has to be rinsed NSF Registered, #143199
Nu-Blast High solvency cleaning power No Rinse required Cleaning solvent evaporates completely Leaves no residue quick drying Non flammable Non corrosive or conductive Outdoor use only, or indoor with proper ventilation Orange scent
Cal-Blast Excellent solvency cleaning power Pressure blasting spray pattern No Rinse required Cleaning solvent evaporates completely Quick drying leaves no residue Removes the most stubborn deposits & soils Citrus scent Specifically designed for coils located indoors (w/ adequate ventilation) kitchen areas Alternative to KO Dirtblaster
Pan-Spray Quick and economical repair for: Condensate Pan cracks Leaks Gutters & MORE Long lasting, rubberized protective coating Fast Drying approximately 30 min Temperature range of -10 F to 250 F Stays flexible and won't freeze or sag Available in: Black, White, or Can be painted 4296-51 4296-50
Nu-Kill II QUICKLY-KILLS Wasps Yellow jackets Hornets & MORE Powerful blasting spray, approx 20 ft. Safe around electrical equipment Dielectric strength to 23,000 volts Contains no fluorocarbons EPA Registered Alternative to Black Flag
Adhesives Spray-N-Bond Spray Adhesive
Spray-N-Bond Web Spray Designed for duct liner Permanent and temporary jobs Waterproof & non-staining Non-chlorinated and non-ozone depleting VOC Compliant
Electrical Contact Cleaner Instantly dissolves and removes Greases Dust Oxidation Perfect for cleaning high-precision instruments and components Dielectric strength to 25,000 volts Contains No Fluorocarbons (CFC s) Also available in LV (low VOCs)
Brake-N-Lube Penetrating Lubricant Advanced technology, 4 in 1 formula 1. Penetrates and loosens rusted nuts & bolts 2. Lubricates surfaces, fan blades, hinges, & MORE 3. Displaces Moisture 4. Resists Corrosion Prevents new rust from forming Made with Cerflon High dielectric strength to 33,000 volts Alternative to AeroKroil & PB Blaster
Food Grade Silicone Prevents Sticking and Binding Dairy Machinery Feed Racks and Conveyors Processing Equipment Ice Machine Freezing Plates USDA Authorized FDA Approved for food contact use
V-Belt Dressing Extend modern V-Belt life Keeps belt & hose pliable Prevents slippage Eliminates squealing & chattering
Zinc Rich Cold Galvanizing Highly resistant to nearly all forms of corrosion Repair factory galvanized material which may have been scratched in shipping, welding, assembly, etc. Provides long-term protection Blends well with hot-dip coating Gray in color
Pump Protector One can will winterize most pumps Unaffected by freezing temperatures No special rinsing when starting it up Expands rapidly to coat all parts of the pump USDA approved
Pipe-Dri Provides moisture barrier Stops sweating and dripping For use on: Cold water lines Refrigeration lines Air Conditioning lines Quickly adheres and dries to form hard waterproof coatings Hot water limit of approx. 120 F White in color
Degreasing Solvent ef Dissolves grease and oil in seconds Who may use this product? Appliance repair shops Metal shops Compressor rebuilders Equipment manufacturers Non-corrosive Dielectric strength to 26,000 volts Ozone-Safe Also available in LV (low VOCs)
Nu-Foam Expanding polyurethane prepolymer foam Designed to seal, fill, and insulate small cracks, gaps, and voids Suitable for openings created for HVAC tubes or pipes, duct joints, concrete or wood walls, & MORE Fire retardant and UL listed Tack-free in 30 minutes & completely dried in about 4 hours