age 2 of 14 Model/Type reference...: Ratings...: K-SQ13, KA-SQ13, K-SQ14, KA-SQ14, KO-SQ13, KOA-SQ13, KO-SQ14, KOA-SQ14, K-SQ13C, KA-SQ13C, K-SQ14C, KA- SQ14C, KO-SQ13C, KOA-SQ13C, KO-SQ14C, KOA-SQ14C, K11- SQ13, K12-SQ13, K14-SQ13, KO11-SQ13, KO12-SQ13, KO14- SQ13, K11-SQ14, K12-SQ14, K14-SQ14, K16-SQ14, KO11-SQ14, KO12-SQ14, KO14-SQ14, KO16-SQ14, K11-SQ16, K12-SQ16, K14-SQ16, K16-SQ16, KO11-SQ16, KO12-SQ16, KO14-SQ16, KO16-SQ16 220-240 V, 50/60 Hz, IX4, Class II, K-SQ13, KA-SQ13, KO-SQ13, KOA-SQ13, K-SQ13C, KA-SQ13C, KO-SQ13C, KOA-SQ13C, K11-SQ13, K12-SQ13, K14-SQ13, KO11-SQ13, KO12-SQ13, KO14-SQ13: 1100 W, 1300W max. K-SQ14, KA-SQ14, KO-SQ14, KOA-SQ14, K-SQ14C, KA-SQ14C, KO-SQ14C, KOA-SQ14C, K11-SQ14, K12-SQ14, K14-SQ14, K16- SQ14, KO11-SQ14, KO12-SQ14, KO14-SQ14, KO16-SQ14: 1100 W, 1400W max., K11-SQ16, K12-SQ16, K14-SQ16, K16-SQ16, KO11-SQ16, KO12- SQ16, KO14-SQ16, KO16-SQ16: 1400 W, 1600W max.
age 3 of 14 Testing procedure and testing location: CB Testing Laboratory: Testing location/ address... : Associated CB Laboratory: Testing location/ address... : Intertek Testing Services Shenzhen Ltd. Guangzhou Branch Block E, No.7-2 Guang Dong Software Science ark, Caipin Road, Guangzhou Science City, GETDD, Guangzhou, China Tested by (name + signature)...: Refer to page 1 Approved by (name + signature)...: Refer to page 1 Testing procedure: TM Testing location/ address... : Tested by (name + signature)...: Approved by (name + signature)...: Testing procedure: WMT Testing location/ address... : Tested by (name + signature)...: Witnessed by (name + signature)...: Approved by (name + signature)...: Testing procedure: SMT Testing location/ address... : Tested by (name + signature)...: Approved by (name + signature)...: Supervised by (name + signature)...: Testing procedure: RMT Testing location/ address... : Tested by (name + signature)...: Approved by (name + signature)...: Supervised by (name + signature)...:
age 4 of 14 List of Attachments (including a total number of pages in each attachment): See the page 1 Summary of testing: 1. The submitted products fulfilled the requirements of the standard of :2010, EN 60335-2- 2:2003/A11:2010 used in conjunction with :2002 + A11:2004 + A1:2004 + A12:2006 + A2:2006 +A13:2008 +A14:2010 +A15: 2011 2. The product has been tested and complied with the standard EN 62233:2008 for EMF. Tests performed (name of test and test clause): Full tests were performed on model K11-SQ16; Clause 7, 10, 11,19, 22, 25, 29 were performed on model K-SQ14; Clause 7 and construction review were performed on others models. Testing location: Intertek Testing Services Shenzhen Ltd. Guangzhou Branch Block E, No.7-2 Guang Dong Software Science ark, Caipin Road, Guangzhou Science City, GETDD, Guangzhou, China Summary of compliance with National Differences List of countries addressed: Copy of marking plate The artwork below may be only a draft. The use of certification marks on a product must be authorized by the respective NCBs that own these marks. Remark: Marking plate of others models were identical with the marking plate except model numbers, and rating power.
age 5 of 14 Test item particulars... : Classification of installation and use... : ortable or fixed and indoor use only Supply Connection... : Non detachable power cord with plug ossible test case verdicts: - test case does not apply to the test object...: - test object does meet the requirement...: (ass) - test object does not meet the requirement...: F (Fail) Testing...: Date of receipt of test item...: 13 Jul., 2012 Date (s) of performance of tests...: 13 Jul., 2012 16 Jul., 2012 General remarks: The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. "(see Enclosure #)" refers to additional information appended to the report. "(see appended table)" refers to a table appended to the report. Throughout this report a comma is used as the decimal separator. When determining of test conclusion, measurement uncertainty of test has been considered. This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. The test report only allows to be revised only within the report defined retention period unless standard or regulation was withdrawn or invalid. Remark: This test report is appended to the test report GZ12020088-1 (LVD certificate no.: GZ12020088-1) with the following changed: Added alternative certified switch, see the table 24.1 for detail. The clauses 24 were re-evaluated. The test report is only valid in conjunction with the test report GZ12020088-1. Manufacturer s Declaration per sub-clause 6.2.5 of IECEE 02:
age 6 of 14 The application for obtaining a CB Test Certificate includes more than one factory location and a declaration from the Manufacturer stating that the sample(s) submitted for evaluation is (are) representative of the products from each factory has been provided...: Yes Not applicable When differences exist; they shall be identified in the General product information section. Name and address of factory (ies)...: 1. SVC Limited Building C, Taiwan Industrial Township, Shenzhen Export rocessing Zone, ingshan, Shenzhen,.R. China 2. Shop-Vac Corporation. 2323 Reach Road Williamsport, A 17701 USA. General product information: ortable Vacuum Cleaner for household and indoor use only. All models are the same, except the following difference: K 11 -SQ 14 C x y z x can be blank, A, O, OA, 11, 12, 14, 16, O11, O12, O14, O16 y can be 13, 14, 16 z can be blank or C x Difference description Tank Top cover and handle blank A O OA 10L Tank 16L Tank 10L Tank 16L Tank 11 20L, 11 Inch diameter, metal Tank 12 20L, 12 Inch diameter lastic Tank 14 30L, 14 Inch diameter metal Tank or plastic tank 16 45L or 60L, 16 Inch diameter metal Tank O11 O12 O14 O16 20L, 11 Inch diameter metal Tank 20L, 12 Inch diameter lastic Tank 30L, 14 Inch diameter metal Tank or plastic tank 45L or 60L, 16 Inch diameter metal Tank Shape "A" Shape "B" Shape "A" Shape "B" y Difference description Motor ower cord Rating 13 2789000 2X0,75mm 2 1100 W, 1300W max
age 7 of 14 16 2789001 2X1,0mm 2 1400 W, 1600W max. z blank C Difference description With Large Cartridge Filter With Small Cartridge Filter Full tests were performed on model K11-SQ16 Clause 7, 10, 11,19.101, 22, 25, 29 were performed on model K-SQ14; Clause 7 and construction review were performed on others models.
age 8 of 14 IEC 60335-2-2 Clause Requirement + Test Result - Remark Verdict 24 COMONENTS -- 24.1 Components comply with safety requirements in relevant IEC standards List of components (see appended table) Components not tested and found to comply with relevant IEC standard for the number of cycles specified are tested in accordance with 24.1.1 to 24.1.9 Components not tested and found to comply with relevant IEC standard, components not marked or not used in accordance with its marking, tested under the conditions occurring in the Lampholders and starterholders not being tested and found to comply with the relevant IEC standard, tested as a part of the and additionally according to the gauging and interchangeability requirements of the relevant IEC standard 24.1.1 Capacitors likely to be permanently subjected to the supply voltage and used for radio interference suppression or for voltage dividing, complying with IEC 60384-14, or Certified capacitor tested according to annex F 24.1.2 Safety isolating transformers complying with IEC 61558-2-6, or tested according to annex G 24.1.3 Switches complying with IEC 61058-1, the number of cycles of operation being at least 10 000, or tested according to annex H If the switch operates a relay or contactor, the complete switching system is subjected to the test Switches incorporated in vacuum cleaners, other than for household use only, tested for 50 000 cycles of operation (IEC 60335-2-2) Certified switch Household use only 24.1.4 Automatic controls complying with IEC 60730-1 with relevant part 2. The number of cycles of operation being: - thermostats: 10000 - temperature limiters: 1 000 - self-resetting thermal cut-outs: 300 --
age 9 of 14 IEC 60335-2-2 Clause Requirement + Test Result - Remark Verdict - voltage maintained non-self-resetting thermal cut-outs: 1000 - other non-self-resetting thermal cut-outs: 30 - timers: 3 000 - energy regulators: 10 000 Thermal motor protectors are tested in combination with their motor under the conditions specified in Annex D For water valves containing live parts and that are incorporated in external hoses for connection of an to the water mains, the degree of protection declared for subclause 6.5.2 of IEC 60730-2-8 is IX7 24.1.5 Appliance couplers complying with IEC 60320-1 However, s classified higher than IX0, the couplers complying with IEC 60320-2-3 Interconnection couplers complying with IEC 60320-2-2 24.1.6 Small lamp holders similar to E10 lampholders complying with IEC 60238, the requirements for E10 lampholders being applicable 24.1.7 If the remote operation of the is via a telecommunication network, the relevant standard for the telecommunication interface circuitry in the is IEC 62151 24.1.8 The relevant standard for thermal links is IEC 60691. Thermal links not complying with IEC 60691 are considered to be an intentionally weak part for the purposes of Clause 19 24.1.9 Relays, other than motor starting relays, tested as part of the They are also tested in accordance with Clause 17 of IEC 60730-1, the number of operations in 24.1.4 selected according to the relay function in the...: 24.2 No switches or automatic controls in flexible cords No devices causing the protective device in the fixed wiring to operate in the event of a fault in the
age 10 of 14 IEC 60335-2-2 Clause Requirement + Test Result - Remark Verdict No thermal cut-outs that can be reset by soldering 24.3 Switches intended for all-pole disconnection of stationary s are directly connected to the supply terminals and having a contact separation in all poles, providing full disconnection under overvoltage category III conditions 24.4 lugs and socket-outlets for extra-low voltage circuits and heating elements, not interchangeable with plugs and socket-outlets listed in IEC 60083 or IEC 60906-1 or with connectors and inlets complying with the standard sheets of IEC 60320-1 24.5 Capacitors in auxiliary windings of motors marked with their rated voltage and capacitance and used accordingly Voltage across capacitors in series with a motor winding does not exceed 1,1 times rated voltage, when the is supplied at 1,1 times rated voltage under minimum load 24.6 Working voltage of motors connected to the supply mains and having basic insulation that is inadequate for the rated voltage of the, not exceeding 42V In addition, the motors are complying with the requirements of Annex I 24.7 Hose-sets for connection of s to the water mains, complying with IEC 61770 and supplied with the
age 11 of 14 IEC66335_2_2C - ATTACHMENT Clause Requirement + Test Result - Remark Verdict AMENDMENT 13: 2008 TO : 2002 Clause Requirement Test Result Remark Verdict 24 Component 24.1.7 (Replacement:) If the remote operation of the is via a telecommunication network, the relevant standards for the telecommunication interface circuitry in the are EN41003 and EN60950-1: 2006, Subcaluse 6.3 AMENDMENT 14: 2010 TO : 2002 Clause Requirement Test Result Remark Verdict 24 COMONENTS 24.1 Replacement: -- Components comply with safety requirements in relevant standards the requirements of Clause 29 of this standard apply between live parts of components and accessible parts of the the requirements of 30.2 of this standard apply to parts of non-metallic material in components including parts of non-metallic material supporting current-carrying connections inside components List of components (see appended table) Components not tested and found to comply with relevant standard for the number of cycles specified are tested in accordance with 24.1.1 to 24.1.9 Components not tested and found to comply with relevant standard, components not marked or not used in accordance with its marking, tested under the conditions occurring in the Lampholders and starterholders that have not been previously tested and found to comply with the relevant standard are tested as a part of the and shall additionally comply with the gauging and interchangeability requirements of the relevant standard under the conditions occurring in the.
age 12 of 14 24.1 TABLE: Components Object / part No. Manufacturer/ trademark ower plug CBQ Kailian Technology (Shenzhen) Co., Ltd. Sahmet International Ltd. Type / model Technical data Standard Mark(s) of conformity E224 S-322 250V~ 16A DIN 49406-R 250V~ 16A DIN 49406-R BS lug De-Chang DC-168A 250 Va.c. with approved 13 A current fuse Australian plug Switzerland plug Italy lug ower cord of models with Rating power 1100W (Alternative) (Alternative) ower cord of models with Rating power 1400W (Alternative) CBQ Kailian Technology (Shenzhen) Co., Ltd. Dongguan Humen Hong Quan Hardware Hoview Industrial Ltd CBQ Kailian Technology (Shenzhen) Co., Ltd. CBQ Kailian Technology (Shenzhen) Co., Ltd. King Fook International Ltd. Chung Kwang Electric Wire & Cable Co., Ltd. Sahmet International Ltd. Chao Hui Electrical Appliance Co., Ltd. Chung Kwang Electric Wire & Cable Co., Ltd. Sahmet International Ltd. L-60L 250 Va.c. with approved 13 A current fuse DIN VDE 0620-1 DIN VDE 0620-1 BS1363 BS1363 VDE* VDE* ASTA* BSI* HQ 898 250 Va.c. BS1363 BSI* with approved 13 A current fuse S003 AC 250 V; 10A AS/NZS 3112 Fair Trading* L-15 AC 250 V; 10A AS/NZS 3112 Fair Trading* L-37 AC 250 V; 10A; I00; L+N CHtype 11 KF203 H05VV-F H05VVH2-F H05VV-F H05VVH2-F H05VV-F H05VVH2-F H05VV-F H05VVH2-F H05VV-F H05VVH2-F SEV 1011:1998 + corrigendum 2002-09; IEC 60884-1:02 AC 250 V; 10A; CEI 23-50-II Ed. 2007 + V1: 2008 +S* IMQ* 2 x 0,75 mm² VDE 0281-5 VDE* 2 x 0,75 mm² VDE 0281-5 VDE* 2 x 0,75 mm² VDE 0281-5 VDE* 2 x 1,0 mm² VDE 0281-5 VDE* 2 x 1,0 mm² VDE 0281-5 VDE*
age 13 of 14 (Alternative) Chao Hui Electrical Appliance Co., Ltd. Tenta Electric H05VV-F H05VVH2-F X2 capacitor AC275V; 0,22 MEX Indrstrial Co., Ltd uf X2;T100 ower Switch EVEREL Group G 250V~, 12 A, S.p.A. T125, 1E4, power factor: 0,97 (Alternative) CW Industries GRS-4121 250V~, 8(8) A, T85, 25E3 Internal Wire UNIRISE 1015 600 VAC, ELECTRIC WIRE 105 C, 18AWG & CABLE CO LTD or 16 AWG (Alternative) (Alternative) WONDERFUL HI- TECH CO LTD Jiangxi New Wei Yan Electron Co., Ltd. 1015 600VAC, 105 C, 18AWG or 16 AWG 1015 600VAC, 105 C, 18AWG or 16 AWG (Alternative) Cabled-Tech 1015 600VAC, 105 C, 18AWG or 16 AWG Motor for models for the Models with rating 1100W Motor for models: for the Models with rating 1400W - Vacuum Motor Insulation System ShopVac manufactured (Felchar or SVC) 2789000 230-240 V~, 50Hz, 1100-1300W max., Class 130 ShopVac 2789001 230-240 V~, manufactured 50Hz, 1400- (Felchar or SVC) 1600W max., Class 130 ShopVac FMC-01 Class 130, Manufactured 130 C (Felchar or SVC) max., 600 V max. Enclosure ExxonMobil 7033-E3 Thickness: Min 2,0mm Motor cover lastics 8122 Thickness: Engineering Co 3,0mm (Alternative) Marbal MB2000-20 Thickness: 3,0mm 1) An asterisk indicates a mark which assures the agreed level of surveillance 2 x 1,0 mm² VDE 0281-5 VDE* EN 60384-14 EN 61058-1 EN 61058-1 VDE* VDE* VDE* UL*( E17609 5) Tested with UL* ( E 77981) UL* ( E337631) UL* ( E337631)
Overall view for model: K11-SQ16 age 14 of 14 hoto Documents ower switch view of all models: (End of report)