ISO/TC 67/SC 4 N 282 CEN/TC 12 and ISO TC67 SC4 Plenary meeting in PAU (2004) 12/13 May 2004 1 1
CEN TC12 AND ISO TC67 CEN TC12 is acting according to the goal of the Industry: GLOBAL STANDARDS USED LOCALLY WORLDWIDE CEN TC12 adopts ISO TC67 Standards in EUROPE. Vienna Agreement between ISO and CEN. 5 European countries shall participate. Parallel voting of the common standards. (or UAP) European Standards become National Standards when voted 12/13 May 2004 2 2
I) Common work programme 23 items FDIS 10417 AWI 10428 CD 10431 CD 13624-1 IS 13626 CD 10407-1 WI 00012 006 WI 00012 015 WI 00012 016 WI 00012 049 WI 00012 051 (UAP) WI 00012 092 12/13 May 2004 3 3
I) Common work programme (2) 23 items CD 10407-2 WD 16389 WD 15136-2 DIS 17078-1 AWI 17078-2 AWI 17078-3 WI 00012 093 WI 00012 102 WI 00012 109 WI 00012 117 WI 00012 118 WI 00012 119 12/13 May 2004 4 4
I) Common work programme (3) 23 items DIS 10424-1 DIS 10424-2 DIS 10432 DIS 13628-1 DIS 13628-6 IS 10423 rev. WI 00012 121 WI 00012 122 WI 00012 139 WI 00012 141 WI 00012 145 WI 00012 158 (UAP) 12/13 May 2004 5 5
I) Common work programme (4) 23 items DIS 13628-2 AWI 13628-4 CD 16070 DIS 13628-10 AWI 13628-11 WI 00012 159 WI 00012 160 WI 00012 162 WI 00012 165 WI 00012 166 12/13 May 2004 6 6
II) 13 common published standards (1) EN ISO 13628-1 : 1999: P&NGI - Design and operation of subsea production systems - Part 1 : General requirements and recommendations EN ISO 13628-4 : 1999: P&NGI - Design and operation of subsea production systems - Part 4 : Subsea wellhead and tree equipment EN ISO 10432 : 1999 : P&NGI Downhole equipment - Subsurface safety valve equipment EN ISO 13534 : 2000 : P&NGI - Drilling and production equipment - Inspection, maintenance, repair and remanufacture of hoisting equipment EN ISO 13628-2 : 2000 : P&NGI - Design and operation of subsea production systems - Part 2 : Flexible pipe systems for subsea and marine applications 12/13 May 2004 7 7
II) 13 common published standards (2) EN ISO 13535 : 2000 : P&NGI - Drilling and production equipment Hoisting equipment EN ISO 13628-3 : 2000 : P&NGI - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems EN ISO 15136-1: 2001 : Downhole equipment for petroleum and natural gas industries - Progressing cavity pumps systems for artificial lift - Part 1 : Pumps EN ISO 13533 : 2001 : P&NGI - Drilling and production equipment - Drill through equipment EN ISO 14310 : 2001 : P&NGI - Downhole equipment - Packers and bridge plugs 12/13 May 2004 8 8
II) 13 common published standards (3) EN ISO 16070 : 2001 : P&NGI - Downhole equipment - Lock mandrels and landing nipples EN ISO 13625 : 2002 : P&NGI - Drilling and production equipment - Marine drilling riser couplings EN ISO 14693 : 2003 : P&NGI Drilling and well-servicing equipment 12/13 May 2004 9 9
PROBLEME OF EN ISO 10423 Résolution 4 (Brussels 2004): Further to resolution CEN/TC 12 no 19 (2003), CEN/TC 12 requests CEN/CMC to withdraw EN ISO 10423:2001. This is because the document contains technical errors which could result in an unsafe product. CEN/TC 12 requests CEN/CMC to launch a one month UAP on the corrected version of this document which has been published by ISO/CS on December 2003. This replaces an earlier request (for a normal 5 months UAP) transmitted by the CEN/TC 12 secretariat on 12 December 2003. The French and German representative to CEN/TC 12 confirm that the French and German versions are not required for this UAP ballot in order not to delay the process. 12/13 May 2004 10 10
PROBLEME OF EN ISO 10423 Through a CEN BT Resolution by mail EN ISO 10423 is cancelled on the 4th of march 2004. An accelerated UAP is launched until the 4th of june 2004 to accept the new ISO 10423 : 2003 12/13 May 2004 11 11
IMPROVEMENT OF THE PARALLEL PROCESS RESOLUTION 8 (Brussels 2004) : In order to improve the simultaneous processing of ISO/TC 67 and CEN/TC 12 standards, CEN/TC 12 requests ISO/TC 67 secretariat and its SC secretariats to transmit ISO NWIP (for new projects only) to the CEN/TC 12 secretariat such that the CEN/TC 12 secretariat can ballot the same item in parallel (or with as short a delay as possible). FOR YOUR ACTION IN SC 4 (with anticipated thanks) 12/13 May 2004 12 12
IMPROVEMENT OF THE PARALLEL PROCESS RESOLUTION 9 (Brussels 2004) : Further to resolution 8 and in order to improve the simultaneous processing of ISO/TC 67 and CEN/TC 12 standards and noting that both CEN and ISO have made efforts to reduce the timeframe to publication of standards, CEN/TC 12 notes that CEN and ISO have taken different steps in the available options of time reduction and that the ISO ones (e. g. skipping the FDIS when 100 % approval at DIS enquiry) are not always applicable through the Vienna Agreement. CEN/TC 12 requests its secretariat to bring this to the attention of the CEN/CMC in order to investigate improvements. 12/13 May 2004 13 13