HV low distortion for heavy off-road vehicles, meets ANSI Z26.1 AS-4 Construction, logging, agricultural and industrial vehicle glazing Extended UV and abrasion resistant coating for side and rear window meets ANSI Z26.1 AS-4 RV, construction, and commercial truck rear windows BG optical performance for bus glazing, meets ANSI Z26.1 AS-4 and FMVSS 302 Bus window glazing TG optical performance for rail car glazing, meets Federal Railway Agency standards for flammability, ballistics, and impact Passenger rail car glazing Opaque sheet for mass transit interiors. 49 CFR 238 standards for flame and smoke, and toxic gas generation TX MTR Typical Applications stain resistance for mass transit interiors. 49 CFR 238 standards for flame and smoke, and toxic gas generation stain resistance for mass transit interiors customizable per end user specifications for decoration. Meets Federal Railway Agency/DOT 49 CFR 238 standards for flame and smoke, and toxic gas generation MTR AG MTR AG Deco Frit AL Hard coated, customizable blackout border Heavy equipment cab safety glazing, marine and mass transit glazing High optical quality abrasion, chemical and UV resistant Automotive laminates Sheet Products Guide 119 Salisbury Road Sheffield, MA 01257 Toll Free: 800.254.1707 Fax: 800.457.3553 sfdinfo@covestro.com sheets.covestro.com BRO350 0915 Copyright, Covestro, 2015 and are registered trademarks of Covestro The manner in which you use and the purpose to which you put and utilize our products, technical assistance and information (whether verbal, written or by way of production evaluations), including any suggested formulations and recommendations, are beyond our control. Therefore, it is imperative that you test our products, technical assistance, information and recommendations to determine to your own satisfaction whether our products, technical assistance and information are suitable for your intended uses and applications. This application-specific analysis must at least include testing to determine suitability from a technical as well as health, safety, and environmental standpoint. Such testing has not necessarily been done by Covestro. Unless we otherwise agree in writing, all products are sold strictly pursuant to the terms of our standard conditions of sale which are available upon request. All information and technical assistance is given without warranty or guarantee and is subject to change without notice. It is expressly understood and agreed that you assume and hereby expressly release us from all liability, in tort, contract or otherwise, incurred in connection with the use of our products, technical assistance, and information. Any statement or recommendation not contained herein is unauthorized and shall not bind us. Nothing herein shall be construed as a recommendation to use any product in conflict with any claim of any patent relative to any material or its use. No license is implied or in fact granted under the claims of any patent. With respect to health, safety and environment precautions, the relevant Material Safety Data Sheets (MSDS) and product labels must be observed prior to working with our products. Key Product Features Grade
polycarbonate sheet products...technology adapted to the performance and aesthetic demands of specific industries About this guide Designed as a quick reference tool, this guide summarizes the main features, differences, and applications for sheet products. Organized by industries, it shows typical applications for each product. Products with broader uses are listed in several industry categories. For complete information on properties, warranty and agency compliance, visit www.sheets.covestro.com Information under column headings Grade lists formal product designations for ordering and referencing. Key Product Features describes each product s key attributes and helps differentiate products from each other. Typical Applications describes the most common uses for each product in the industry. Key Product Typical Grade Features Applications GP Impact Resistant Industrial glazing, machine guards, structural parts, thermoformed and fabricated components GP Patterns Pebble and matte Industrial glazing, privacy glazing, signs, displays, surface finishes and lighting covers OP Optical Quality Recreational vehicle windscreens, face shields, laminates FI UL 94 V-0 and 5VA rated, Electrical devices, equipment housings, not UV stabilized switchgear covers, and interior aircraft components LF UL 94 V-0, has UV inhibitor Electrical devices, equipment housings, switchgear covers, light fixtures, aerospace components FD FDA compliant for food contact Machine guards, bulk food bins, candy molds, sneeze guards, limited use autoclave packaging, hospital trays, bassinets, incubators, and medical device storage containers SL Co-extruded UV resistant surface Flat and formed sign faces and channel letters available 1 or 2 sides SL Matte Co-extruded UV resistant surface Flat and formed sign faces and channel letters with matte texture
Key Product Typical Grade Features Applications LD Specially formulated for LED light Flat and formed sign faces and channel letters diffusion, co-extruded UV surface using LEDs, point-of-purchase displays technology, standard industry colors UV UV resistant, can be cold formed Awning, entryway canopies, skylights, barrel on site vaults, glazed archways, covered pedestrian walkways and sloped, vertical, and curved glazing SK1 Prismatic pattern optimized to Awning, skylights, entryway canopies, barrel diffuse and distribute light with vaults, sloped, vertical and curved glazing high light transmission multi-uv Light weight, high structural strength, Greenhouses, solariums and atriums, multiple geometries for different covered walkways, insulative privacy glazing structural and insulating properties AR 7 year warranty: abrasion and Replacement glazing, industrial guarding, UV resistant coating safety components 15 15 year warranty: abrasion Architectural glazing for commercial, municipal, and UV resistant coating medical, residential, retail and other buildings, transportation centers FC Two-side abrasion resistant coating, Formed industrial applications, face shields, cold formable and drape formable, recreational vehicle windscreens meets ANSI Z26.1 AS-6 CG375 Meets ASTM F 1915 Grade 3, Detention and psychiatric containment glazing ASTM F 1233 Class 1.4 Contraband Passage, H.P. White TP 0500.03 Level 1 CG500 Meets ASTM F 1915 Grade 2, ASTM F 1233, Detention and psychiatric containment glazing 2.8 Body Passage, ASTM F 1233 Class II, H.P. White TP 0500.03, Level 1 CG750 Meets ASTM F 1915 Grade 1, ASTM F 1233 Detention and psychiatric containment glazing Class III, H.P. White TP 0500.03 Level II
Key Product Typical Grade Features Applications BR750 Meets UL 752 Level 1 Ballistic resistant glazing for government, (9 mm Full Metal Copper Jacket with lead) institutional and commercial installations BR1000 Meets UL 752 Level 2 (.357 Magnum Ballistic resistant glazing for government jacketed lead soft point), institutional and commercial installations ASTM F 1233.08 Class 2.4 Contraband Passage, ASTM F 1233.08 Class 5 Body Passage, ASTM F 1915 Grade 1, H.P. White TP 0500.03 Level IV BR1250 Meets UL 752 Level 3 (.44 Magnum lead Ballistic resistant glazing for government semi-wadcuttter), NIJ Level II, Level IIIA, institutional and commercial installations ASTM F 1233.08 Class 2.5 Contraband Passage, ASTM F 1233 Class 5 Body Passage, ASTM F 1915 Grade 1, H.P. White TP 0500 Level IV MS1250 Meets UL 752 Level 6 multiple shots Ballistic resistant glazing for severe threat 9 mm Uzi, Shotgun rifled lead slug and lead buckshot (12 Pellets) Lumen XT Specifically formulated for superior Interior LED and conventional LED and conventional light diffusion, lighting fixtures wide range of diffusion levels DX-NR Specifically formulated for superior Exterior LED and conventional LED light diffusion lighting fixtures IR Meets welding shades 3 and 5, complies Face shields for flame welding and cutting, with ANSI Z87.1, EN 169: CSA Z94.3 general IR protection MG 0.750 2.0 thick for machining, Manifold, insulators, diaphragms, electrical, textured surface semiconductor, military applications WG 0.750 2.0 thick, optical quality Sight windows for tanks/vessels, viewports, medical parts, military applications AU ultra clear, Specialty laminates high visible light transmission UC High light transmission and high Military aircraft canopies, specialty laminates optical quality SQ UV stabilized, transparent Optical critical end use
HV low distortion for heavy off-road vehicles, meets ANSI Z26.1 AS-4 Construction, logging, agricultural and industrial vehicle glazing Extended UV and abrasion resistant coating for side and rear window meets ANSI Z26.1 AS-4 RV, construction, and commercial truck rear windows BG optical performance for bus glazing, meets ANSI Z26.1 AS-4 and FMVSS 302 Bus window glazing TG optical performance for rail car glazing, meets Federal Railway Agency standards for flammability, ballistics, and impact Passenger rail car glazing Opaque sheet for mass transit interiors. 49 CFR 238 standards for flame and smoke, and toxic gas generation TX MTR Typical Applications stain resistance for mass transit interiors. 49 CFR 238 standards for flame and smoke, and toxic gas generation stain resistance for mass transit interiors customizable per end user specifications for decoration. Meets Federal Railway Agency/DOT 49 CFR 238 standards for flame and smoke, and toxic gas generation MTR AG MTR AG Deco FP AL Hard coated, customizable blackout border Heavy equipment cab safety glazing, marine and mass transit glazing High optical quality abrasion, chemical and UV resistant Automotive laminates Sheet Products Guide 119 Salisbury Road Sheffield, MA 01257 Toll Free: 800.254.1707 Fax: 800.457.3553 sfdinfo@covestro.com sheets.covestro.com BRO350 0915 Copyright, Covestro, 2015 and are registered trademarks of Covestro The manner in which you use and the purpose to which you put and utilize our products, technical assistance and information (whether verbal, written or by way of production evaluations), including any suggested formulations and recommendations, are beyond our control. Therefore, it is imperative that you test our products, technical assistance, information and recommendations to determine to your own satisfaction whether our products, technical assistance and information are suitable for your intended uses and applications. This application-specific analysis must at least include testing to determine suitability from a technical as well as health, safety, and environmental standpoint. Such testing has not necessarily been done by Covestro. Unless we otherwise agree in writing, all products are sold strictly pursuant to the terms of our standard conditions of sale which are available upon request. All information and technical assistance is given without warranty or guarantee and is subject to change without notice. It is expressly understood and agreed that you assume and hereby expressly release us from all liability, in tort, contract or otherwise, incurred in connection with the use of our products, technical assistance, and information. Any statement or recommendation not contained herein is unauthorized and shall not bind us. Nothing herein shall be construed as a recommendation to use any product in conflict with any claim of any patent relative to any material or its use. No license is implied or in fact granted under the claims of any patent. With respect to health, safety and environment precautions, the relevant Safety Data Sheets (SDS) and product labels must be observed prior to working with our products. Key Product Features Grade
HV low distortion for heavy off-road vehicles, meets ANSI Z26.1 AS-4 Construction, logging, agricultural and industrial vehicle glazing Extended UV and abrasion resistant coating for side and rear window meets ANSI Z26.1 AS-4 RV, construction, and commercial truck rear windows BG optical performance for bus glazing, meets ANSI Z26.1 AS-4 and FMVSS 302 Bus window glazing TG optical performance for rail car glazing, meets Federal Railway Agency standards for flammability, ballistics, and impact Passenger rail car glazing Opaque sheet for mass transit interiors. 49 CFR 238 standards for flame and smoke, and toxic gas generation TX MTR Typical Applications stain resistance for mass transit interiors. 49 CFR 238 standards for flame and smoke, and toxic gas generation stain resistance for mass transit interiors customizable per end user specifications for decoration. Meets Federal Railway Agency/DOT 49 CFR 238 standards for flame and smoke, and toxic gas generation MTR AG MTR AG Deco Frit AL Hard coated, customizable blackout border Heavy equipment cab safety glazing, marine and mass transit glazing High optical quality abrasion, chemical and UV resistant Automotive laminates Sheet Products Guide 119 Salisbury Road Sheffield, MA 01257 Toll Free: 800.254.1707 Fax: 800.457.3553 sfdinfo@covestro.com sheets.covestro.com BRO350 0915 Copyright, Covestro, 2015 and are registered trademarks of Covestro The manner in which you use and the purpose to which you put and utilize our products, technical assistance and information (whether verbal, written or by way of production evaluations), including any suggested formulations and recommendations, are beyond our control. Therefore, it is imperative that you test our products, technical assistance, information and recommendations to determine to your own satisfaction whether our products, technical assistance and information are suitable for your intended uses and applications. This application-specific analysis must at least include testing to determine suitability from a technical as well as health, safety, and environmental standpoint. Such testing has not necessarily been done by Covestro. Unless we otherwise agree in writing, all products are sold strictly pursuant to the terms of our standard conditions of sale which are available upon request. All information and technical assistance is given without warranty or guarantee and is subject to change without notice. It is expressly understood and agreed that you assume and hereby expressly release us from all liability, in tort, contract or otherwise, incurred in connection with the use of our products, technical assistance, and information. Any statement or recommendation not contained herein is unauthorized and shall not bind us. Nothing herein shall be construed as a recommendation to use any product in conflict with any claim of any patent relative to any material or its use. No license is implied or in fact granted under the claims of any patent. With respect to health, safety and environment precautions, the relevant Safety Data Sheets (SDS) and product labels must be observed prior to working with our products. Key Product Features Grade