GranVille LED Evolution of a Classic
HOLOPHANE GranVille LED THE USE OF LED (LIGHT EMITTING DIODE) LIGHT SOURCES IN STREET AND AREA LIGHTING APPLICATIONS IS GAINING MOMENTUM IN TODAY S LIGHTING WORLD. IDEALLY, LED LUMINAIRES REDUCE ENERGY CONSUMPTION, FACILITATE LONG COMPONENT LIFE, AND PROMOTE SUSTAINAILITY. To meet these 21st century needs, it is imperative that the LED system is properly engineered for thermal and performance considerations. Holophane has exhausted many hours of research and development to ensure reliability through innovative integration of this exciting technology. 2 HOLOPHANE DECORATIVE GranVille LED
Features and enefits O Dedicated thermal management system for maximum performance and reliability O Designed for use with existing optics and pole locations reducing installation costs O Optimized to meet existing lighting standards O Asymmetric and symmetric distributions offer application design flexibility O Simple access to electronic driver for ease of maintenance Typical Applications O City Streets O Parks O Residential Areas O Campuses O Walkways O Parking Lots HOLOPHANE DECORATIVE GranVille LED 3
HOLOPHANE Optional Covers Cast Aluminum Finial Cast Aluminum Finial Premier Optics Classic Optics Wouldn t you want the entire lighting fixture to last as long as the LED? Dedicated Heat Sink Access Door Die-cast Housing Classic Glass Plastic The orosilicate Glass Advantage You can have aesthetically pleasing permanent glass that sparkles and will never turn yellow or cloudy with age. Pole Options Premier Internal Reflector (Lily) and LED oard offers energy savings and light control Trim and Cover Options for the Classic and Premier Optics offers a variety in luminaire shapes, decorative trim and uplight options Photocell Window is hidden to maintain architectural form Slipfitter mounts to 3 D x 3 H pole tenon, and is secured in place through the use of six hex socket screws Access Door for easy access to the electronic driver 4 HOLOPHANE DECORATIVE GranVille LED Pole Options include a variety of pole materials and styles available to complement luminaire and site architecture
Innovative LED Technology Thermal Management LED light source output and system life are optimized with proper thermal management. The above diagram shows the effective engineering behind a dedicated heat sink. Note the convection currents pulling the heat away from the critical components. Optical Precision As shown above, the optical system is designed with three major parts to maximize energy savings and ensure design effectiveness. Retrofit Existing Streetlights The new GranVille LED system has been designed to be fully compatible with installed GranVille glass globes. The choice is yours. If you select the housing and LED system only, you will realize the following benefits: O Promote sustainability O Save on initial costs O Experience long system operating life HOLOPHANE DECORATIVE GranVille LED 5
HOLOPHANE Ordering Information Dimensional Details 1, 2 Classic Optic Maximum Weight: 28.12 kg (62 lbs) Maximum E.P.A.: 1.75 sq. ft. Performance Specifications General The GranVille LED is designed for years of maintenance free operation. The traditional acorn shaped luminaire, while reminiscent of the 1920s contains a precision optical system that maximizes post spacings while maintaining uniform illumination. Optical System The optical system consists of a precisely molded thermal resistant borosilicate glass refractor and top reflector mounted within decorative aluminum ribs and banding. The glass top reflector redirects over 50% of the upward light into the controlling refractor while allowing a soft uplight component to define the traditional acorn shape of the luminaire. Two decorative aluminum covers are available. The lower refractor uses precisely molded prisms to maximize pole spacings while maintaining uniform illuminance. Two distributions are available, designed for asymmetric and symmetric distributions. Housing The luminaire finned housing, cast of aluminum, provides an enclosure for the electronic driver and is designed to thermally manage the LED array provided. A metalized reflector is attached to provide direction for the main beam. Four uniquely designed stainless steel spring clips enclosed in a polyvinyl chloride sleeve and adjusted by a hex head 1/4-20 bolts securely cradle the prismatic glass refractor. The same 1/4-20 bolts support the decorative rib and band assembly. A slipfitter will accept a 3" high by 2 7 8" to 3 1 8" O.D. pole tenon. Housing Door Cast of aluminum, the housing door is removable by one captive screw. For units with an EEI-NEMA twist-off photocell receptacle, the door contains a glass window to allow light to reach the cell. LED Driver (Refer to allast Data Sheet for specific operating characteristics) 50 or 60 Hz voltage sensing 120-277V >90% efficient electronic. Potted for increased thermal management. Removable through access door. Finish The luminaire is finished with polyester powder paint applied after a pretreatment process to ensure maximum durability. The finish shall pass the 1000 hour salt fog test per ATSM standard 117. UL Listing The luminaire is UL listed as suitable for wet locations up to 40 C ambient temperature, depending on wattage. IP 66 rated optics. IP65 rated housing. 3, 4 Premier Optic Maximum Weight: 28.12 kg (62 lbs) Maximum E.P.A.: 1.75 sq. ft. 6 HOLOPHANE DECORATIVE GranVille LED
Preferred Selections: Most Frequently Ordered Catalog Numbers GVE 1 LUMINAIRE GVE 116 2 WATTAGE 116 AS 3 VOLTAGE AS N 4 COLOR N 1 5 OPTICS 1 2 N 6 TRIM N S 7 FINIAL S 8 TRIM COLOR Catalog Numbers for Entire Product Offering (Pricing and lead times may be affected) STEP 1: LUMINAIRE GVE GranVille LED STEP 2: WATTAGE 58 58 watt (350mA) driver 116 116 watt (700mA) driver STEP 5: OPTICS 1 Classic optics, asymmetric 2 Classic optics, symmetric 3 Premier optics, asymmetric 4 Premier optics, asymmetric STEP 7: FINIAL all C Clear Acrylic, 3 E Eagle F Flower P Pawn R Cross S Standard N None STEP 8: TRIM COLOR A As specified lack Z ronze N Green *Colors are just a representation. Custom colors are available upon request STEP 3: VOLTAGE AS Auto-sensing (120-277V) STEP 4: COLOR A As specified lack Z ronze N Green *Colors are just a representation. Custom colors are available upon request 1, 2 3, 4 STEP 6: TRIM and only N No Trim R Ribs and band N R P E F R S C STEP 9: OPTIONS/ACCESSORIES CX 1 Full decorative aluminum cover MX 1 Mayfield decorative aluminum cover (covers 2 3 of the reflector) R NEMA twist-off photocontrol receptacle only S 2 Syracuse style with cover DTL Twist-off Photocontrols P27 120-270 volt PSC Shorting cap 1 Insert trim for X. Must also order finial 2 Available on 1 and 2 Classic optic only HOLOPHANE DECORATIVE GranVille LED 7
Acuity rands Lighting, Inc. Holophane Headquarters, 3825 Columbus Road, Granville, OH 43023 Holophane Canada, Inc. 9040 Leslie Street, Suite 208, Richmond Hill, ON L4 3M4 Holophane Europe Limited, ond Ave., Milton Keynes MK1 1JG, England Holophane, S.A. de C.V., Apartado Postal No. 986, Naucalpan de Juarez, 53000 Edo. de Mexico Contact your local Holophane factory sales representative for application assistance, and computer-aided design and cost studies. For information on other Holophane products and systems, call the Inside Sales Service Department at 866-759-1577. In Canada call 905-707-5830 or fax 905-707-5695. Limited Warranty and Limitation of Liability Refer to the Holophane limited material warranty and limitation of liability on this product, which are published in the Terms and Conditions section of the current Indoor uyers Guide (HL-2140), and is available from your local Holophane sales representative. Visit our web site at www.holophane.com Luminaires may utilize fluorescent or high intensity discharge sources that contain small amounts of mercury. New disposal labeling for these lamps includes the mercury identifier shown on the left to indicate that the lamp contains mercury and should be disposed of in accordance with local requirements. Information sources regarding lamp recycling and disposal are included on the packaging of most mercury-containing lamps and also can be located at www.lamprecycle.org. Product specifications may change without notice. Please contact your local Holophane factory sales representative for the latest product information. uying products with the FSC label supports the growth of responsible forest management worldwide. The eco savings in the production of this brochure: 2 trees preserved for the future 5 lbs waterborne waste not created 42 gallons wastewater flow saved 110 lbs solid waste not generated 13 lbs net greenhouse gases prevented 1,000,000 TUs energy not consumed HL-2430 3/10 2010 Acuity rands Lighting, Inc. All Rights Reserved. Printed in USA