Version: 1603 UV Accelerated Weathering Testers Weice Testing Instrument Co., Limited
Weice WTUV Weice UV Accelerated Weathering Testers are built to reproduce the weathering effects that occur when materials are exposed to sunlight (either direct or through window glass) and moisture as rain or dew in actual usage by using fluorescent UV light, and water spray apparatus. ASTM G151 ASTM G154 ISO 11507 ISO 4892-3 ASTM D4587 SAE J2020 AATCC TM 186 They are the most sophisticated and cost-effective testers in the market. Benefited from years of experience and implement of ISO9001 standard, our high quality testers have been served our worldwide customers reliably more than 15 years.
Fluorescent UV Lamps UVA-340 lamps typically have little or no UV output below 300 nm, they usually do not degrade materials as rapidly as UVB lamps, but they may weathering. Tests using UVA-340 lamps have been found useful for comparing different nonmetallic materials such as polymers and textiles. Spectral Power Distributions of UVA-340 Lamp and Sunlight This short wavelength UV can produce rapid polymer degradation and often causes degradation by mechanisms that do not occur when materials are exposed to sunlight. It's more harsh than UVA-340 lamps. Spectral Power Distributions of UVB-313 Lamp and Sunlight 2
Moisture Condensation Condensation simulates the dew on materials in outdoor, this is available for all WTUV models. The immersed heater is made by #304 stainless steel, the stainless steel float control and auto-fill enable the testers maintain the water level automatically. Water Spray Water spray simulates the rain on materials in outdoor, this is only available for some of WTUV models. Rainfall cools down the materials which being heated up by sun rapidly. This function is perfect for some materials having more severe requirements than condensation. Four stainless steel water spray nozzles are able to cover all the testing areas and distribute uniform rainfall. 3
Irradiance Control System The irradiance control is consisted by sensors and controllers. Quantity of sensors and controllers are varied by different models. Irradiance control system is developed by Beijing Normal University. High accuracy system automatically maintains the irradiance at set point by adjusting the current to UV lamps. Irradiance is presetable and visible by touch screen easily. Specimen Mounting Stainless steel made specimen support is designed to mount various specimens with the thickness from 0.1cm to 10 cm. * 1 Two testing areas enlarge your testing ability greatly. Two default specimen support dimensions are available for your choice: * 2 75*150*1.5mm 150*300*1.5mm Note: *1 Specimen thickness more than 1.5mm need to be confirmed before ordering. *2 The support size is customizable to fit your specimens best. 4
Touch Screen Controller The full colorful touch screen makes the operation of the testers super convenient and easy. Detailed reports let your testing analysis more convenient. Specialized software enables the operation super easy. Maximum 999 cycles storable, easy to call old cycle. Detailed testing status indicators. All test steps are programmable. Lamp lifespan visible. 70 38 5
Technical Parameters Model WTUV/ A WTUV/ B WTUV/ C UV Exposure Condensation Irradiance Control Water Spray Irradiance Sensor Qty N/ A 2sets 4sets Temperature Light Condensation Specimen Capacity Water Supply Lamp Quantity Lamps Max Power Test Area Dimensions External Dimensions Net Weight Power Supply Body Material Drain Refilling Protection +50 0 C to +75 0 C +40 0 C to +60 0 C ** 48 pcs (75* 150mm) 11 Distilled water( 8L/ day) 8 pcs UVA340 / UVB313 Optional Chinese lamps and Q-LAB/ATLAS lamps 3500W 114*40*40 cm(l*w*h) 140*60*150 cm(l*w*h) 150Kg Voltage and frequency dependent on country/region SUS304 Stainless Steel Drain pipe should be installed into floor level drain Automatically and manually Double over-heat protection, shut down automatically Water level control automatically *1 Specimen support is customizable. 6
Some of our customers You may also interested in Salt Spray Chambers Temperature and Humidity Chambers ISO9001 It is the policy of Weice Testing Instrument Co., Ltd. to protect its products by means of patents and registered designs. The information contained Represented by : DORA TECNOLOGIE Via Comasina, 99 20161 Milano MI ITALIA Tel. ++ 39 345 0486730 Fax ++ 39 02 93881611 info@dora-tec.com www.dora-tec.com